Advances in Solution-Processed OLEDs and their Prospects for Use in Displays

This review outlines problems and progress in development of solution-processed organic light-emitting diodes (SOLEDs) in industry and academia. Solution processing has several advantages such as low consumption of materials, low-cost processing, and large-area manufacturing. However, use of a solution process entails complications, such as the need for solvent resistivity and solution-processable materials, and yields SOLEDs that have limited luminous efficiency, severe roll-off characteristics, and short lifetime compared to OLEDs fabricated using thermal evaporation. These demerits impede production of practical SOLED displays. This review outlines the industrial demands for commercial SOLEDs and the current status of SOLED development in industries and academia, and presents research guidelines for the development of SOLEDs that have high efficiency, long lifetime, and good processability to achieve commercialization.

Polyvinylpyrrolidone as a Stabilizer in Synthesis of AgInS2 Quantum Dots

A synthesis protocol of polyvinylpyrrolidone-capped AgInS₂ quantum dots in aqueous solution is reported. Nanoparticle morphology and chemical composition were studied by means of TEM, XRD, XPS, and FTIR. The obtained quantum dots were luminescent in the visible range. The photoluminescence intensity dependence on the polyvinylpyrrolidone amount was demonstrated. The wavelength of the emission maximum varied with changing the [Ag]:[In] molar ratio. The temperature dependence of the photoluminescence intensity of the polyvinylpyrrolidone-capped AgInS₂ quantum dots was investigated within the temperature range of 11-294 K.

Tuning the Optical Band Gap of Semiconductor Nanocomposites-A Case Study with ZnS/Carbon

The linear photochemical response of materials depends on two critical parameters: the size of the optical band gap determines the onset of optical excitation, whereas the absolute energetic positions of the band edges define the reductive or oxidative character of photo-generated electrons and holes. Tuning these characteristics is necessary for many potential applications and can be achieved through changes in the bulk composition or particle size, adjustment of the surface chemistry or the application of electrostatic fields. In this contribution the influence of surface chemistry and fields is investigated systematically with the help of standard DFT calculations for a typical case, namely composites prepared from ZnS quantum dots and functionalized carbon nanotubes. After comparing results with existing qualitative and quantitative experimental data, it is shown conclusively, that the details of the surface chemistry (especially defects) in combination with electrostatic fields have the largest influence. In conclusion, the development of novel or improved photoresponsive materials therefore will have to integrate a careful analysis of the interplay between surface chemistry, surface charges and interaction with the material environment or substrate.

Multinary copper-based chalcogenide nanocrystal systems from the perspective of device applications

Multinary chalcogenide semiconductor nanocrystals are a unique class of materials as they offer flexibility in composition, structure, and morphology for controlled band gap and optical properties. They offer a vast selection of materials for energy conversion, storage, and harvesting applications. Among the multinary chalcogenides, Cu-based compounds are the most attractive in terms of sustainability as many of them consist of earth-abundant elements. There has been immense progress in the field of Cu-based chalcogenides for device applications in the recent years. This paper reviews the state of the art synthetic strategies and application of multinary Cu-chalcogenide nanocrystals in photovoltaics, photocatalysis, light emitting diodes, supercapacitors, and luminescent solar concentrators. This includes the synthesis of ternary, quaternary, and quinary Cu-chalcogenide nanocrystals. The review also highlights some emerging experimental and computational characterization approaches for multinary Cu-chalcogenide semiconductor nanocrystals. It discusses the use of different multinary Cu-chalcogenide compounds, achievements in device performance, and the recent progress made with multinary Cu-chalcogenide nanocrystals in various energy conversion and energy storage devices. The review concludes with an outlook on some emerging and future device applications for multinary Cu-chalcogenides, such as scalable luminescent solar concentrators and wearable biomedical electronics.

Water-Dispersible Copper Sulfide Nanocrystals via Ligand Exchange of 1-Dodecanethiol

In colloidal Cu_2-x S nanocrystal synthesis, thiols are often used as organic ligands and the sulfur source, as they yield high-quality nanocrystals. However, thiol ligands on Cu_2-x S nanocrystals are difficult to exchange, limiting the applications of these nanocrystals in photovoltaics, biomedical sensing, and photocatalysis. Here, we present an effective and facile procedure to exchange native 1-dodecanethiol on Cu_2-x S nanocrystals by 3-mercaptopropionate, 11-mercaptoundecanoate, and S^2- in formamide under inert atmosphere. The product hydrophilic Cu_2-x S nanocrystals have excellent colloidal stability in formamide. Furthermore, the size, shape, and optical properties of the nanocrystals are not significantly affected by the ligand exchange. Water-dispersible Cu_2-x S nanocrystals are easily obtained by precipitation of the nanocrystals capped by S^2-, 3-mercaptopropionate, or 11-mercaptoundecanoate from formamide, followed by redispersion in water. Interestingly, the ligand exchange rates for Cu_2-x S nanocrystals capped with 1-dodecanethiol are observed to depend on the preparation method, being much slower for Cu_2-x S nanocrystals prepared through heating-up than through hot-injection synthesis protocols. XPS studies reveal that the differences in the ligand exchange rates are due to the surface chemistry of the Cu_2-x S nanocrystals, where the nanocrystals prepared via hot-injection synthesis have a less dense ligand layer due to the presence of trioctylphosphine oxide during synthesis. A model is proposed that explains the observed differences in the ligand exchange rates. The facile ligand exchange procedures reported here enable the use of high-quality colloidal Cu_2-x S nanocrystals prepared in the presence of 1-dodecanethiol in various applications.

Optical Properties, Synthesis, and Potential Applications of Cu-Based Ternary or Quaternary Anisotropic Quantum Dots, Polytypic Nanocrystals, and Core/Shell Heterostructures

This review summaries the optical properties, recent progress in synthesis, and a range of applications of luminescent Cu-based ternary or quaternary quantum dots (QDs). We first present the unique optical properties of the Cu-based multicomponent QDs, regarding their emission mechanism, high photoluminescent quantum yields (PLQYs), size-dependent bandgap, composition-dependent bandgap, broad emission range, large Stokes’ shift, and long photoluminescent (PL) lifetimes. Huge progress has taken place in this area over the past years, via detailed experimenting and modelling, giving a much more complete understanding of these nanomaterials and enabling the means to control and therefore take full advantage of their important properties. We then fully explore the techniques to prepare the various types of Cu-based ternary or quaternary QDs (including anisotropic nanocrystals (NCs), polytypic NCs, and spherical, nanorod and tetrapod core/shell heterostructures) are introduced in subsequent sections. To date, various strategies have been employed to understand and control the QDs distinct and new morphologies, with the recent development of Cu-based nanorod and tetrapod structure synthesis highlighted. Next, we summarize a series of applications of these luminescent Cu-based anisotropic and core/shell heterostructures, covering luminescent solar concentrators (LSCs), bioimaging and light emitting diodes (LEDs). Finally, we provide perspectives on the overall current status, challenges, and future directions in this field. The confluence of advances in the synthesis, properties, and applications of these Cu-based QDs presents an important opportunity to a wide-range of fields and this piece gives the reader the knowledge to grasp these exciting developments.

High-performance inverted organic light-emitting diodes with extremely low efficiency roll-off using solution-processed ZnS quantum dots as the electron injection layer

The electron-injecting layer (EIL) is one of the key factors in inverted organic light-emitting diodes (OLEDs) to realize high electroluminescence efficiency. Here, we proposed a novel cathode-modified EIL based on ZnS quantum dots (QDs) in inverted OLEDs, and demonstrated that the device performance was dramatically improved compared to traditional ZnO EIL. The EIL of ZnS QDs may greatly promote the electron injection ability and consequently increase the charge carrier recombination efficiency for the device. We also investigated the effects of different pH values (ZnS-A, pH = 10; ZnS-B, pH = 12) on the properties of ZnS QDs. The best inverted phosphorescent OLED device employing mCP:Ir(ppy)₃ as the emission layer showed a low turn-on voltage of 2.9 V and maximum current efficiency of 61.5 cd A⁻¹. Also, the ZnS-A based device exhibits very-low efficiency roll-off of 0.9% and 4.3% at 1000 cd m⁻² and 5000 cd m⁻², respectively. Our results indicate that use of ZnS QDs is a promising strategy to increase the performance in inverted OLEDs.

The electron-injecting layer (EIL) is one of the key factors in inverted organic light-emitting diodes (OLEDs) to realize high electroluminescence efficiency.

New developments in liquid-liquid extraction, surface modification and agglomerate-free processing of inorganic particles

This review describes new methods for the particle extraction through liquid-liquid interface (PELLI). The discovery of new surface modification techniques, advanced extractors and new adsorption mechanisms enabled novel applications of PELLI in nanotechnology of metals, quantum dots, oxides and hydroxides. Colloidal and interface chemistry of PELLI is emerging as a new area of technological and scientific interest. The progress achieved in the understanding of particle behavior and interactions at the liquid-liquid interface, phase transfer and interface reactions allowed for the development of new extraction mechanisms. An important breakthrough was the development of surface modification techniques for extraction of functional oxides. Especially important is the possibility of particle transfer from the synthesis medium to the device processing medium, which facilitates agglomerate-free processing of functional nanoparticles. Multifunctional extractor molecules were discovered and used as capping and reducing agents for particle synthesis or dispersing and charging agents for colloidal processing. The progress achieved in the development of extractors and extraction mechanisms has driven the advances in the surface modification and functionalization of materials. New PELLI techniques were used for the development of advanced materials and devices for optical, photovoltaic, energy storage, electronic, biomedical, sensor and other applications.

Quantum Dot Light-Emitting Devices: Beyond Alignment of Energy Levels

Multinary semiconductor nanoparticles such as CuInS₂, AgInS₂, and the corresponding alloys with ZnS hold promise for designing future quantum dot light-emitting devices (QLED). The QLED architectures require matching of energy levels between the different electron and hole transport layers. In addition to energy level alignment, conductivity and charge transfer interactions within these layers determine the overall efficiency of QLED. By employing CuInS₂-ZnS QDs we succeeded in fabricating red-emitting QLED using two different hole-transporting materials, polyvinylcarbazole and poly(4-butylphenyldiphenylamine). Despite the similarity of the HOMO-LUMO energy levels of these two hole transport materials, the QLED devices exhibit distinctly different voltage dependence. The difference in onset voltage and excited state interactions shows the complexity involved in selecting the hole transport materials for display devices.

Solid Solution Quantum Dots with Tunable Dual or Ultrabroadband Emission for LEDs

Quantum dots that efficiently emit white light directly or feature a "candle-like" orange photoluminescence with a high Stokes shift are presented. The key to obtaining these unique emission properties is through controlled annealing of the core Cu-In-Ga-S quantum dots in the presence of zinc ions, thus forming Zn-Cu-In-Ga-S solid solutions with different distributions of the substitution and dopant elements. The as-obtained nanocrystals feature excellent quantum yields of up to 82% with limited or even eliminated reabsorption and a color rendering index of bare particles of up to 88, enabling the production of high-quality white LEDs using a single color converter layer. Furthermore, the color properties can be tuned by changing the experimental conditions as well as by varying the excitation wavelength. The multicomponent luminescence mechanism is discussed in detail based on similar literature reports. White LEDs with unparalleled color quality and competitive luminous efficacies are presented herein.

High luminance of CuInS2-based yellow quantum dot light emitting diodes fabricated by all-solution processing

In this work, all-solution processed, multi-layer yellow QLEDs, consisting of a hole transport layer of poly(9-vinylcarbazole), emissive layer of ligand exchanged CuInS2/ZnS QDs, and electron transport layer of ZnO nanoparticles, are fabricated.