Electrospun Sandwich-like Structure of PVDF-HFP/Cellulose/PVDF-HFP Membrane for Lithium-Ion Batteries

Cellulose membranes have eco-friendly, renewable, and cost-effective features, but they lack satisfactory cycle stability as a sustainable separator for batteries. In this study, a two-step method was employed to prepare a sandwich-like composite membrane of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)/cellulose/ PVDF-HFP (PCP). The method involved first dissolving and regenerating a cellulose membrane and then electrospinning PVDF-HFP on its surface. The resulting PCP composite membrane exhibits excellent properties such as high porosity (60.71%), good tensile strength (4.8 MPa), and thermal stability up to 160 °C. It also has exceptional electrolyte uptake properties (710.81 wt.%), low interfacial resistance (241.39 Ω), and high ionic conductivity (0.73 mS/cm) compared to commercial polypropylene (PP) separators (1121.4 Ω and 0.26 mS/cm). Additionally, the rate capability (163.2 mAh/g) and cycling performance (98.11% after 100 cycles at 0.5 C) of the PCP composite membrane are superior to those of PP separators. These results demonstrate that the PCP composite membrane has potential as a promising separator for high-powered, secure lithium-ion batteries.

An Ultrastable Porous Polyhedral Oligomeric Silsesquioxane/Tetraphenylthiophene Hybrid as a High-Performance Electrode for Supercapacitors

In this study, we synthesized three hybrid microporous polymers through Heck couplings of octavinylsilsesquioxane (OVS) with 2,5-bis(4-bromophenyl)-1,3,4-oxadiazole (OXD-Br₂), tetrabromothiophene (Th-Br₄), and 2,5-bis(4-bromophenyl)-3,4-diphenylthiophene (TPTh-Br₂), obtaining the porous organic–inorganic polymers (POIPs) POSS-OXD, POSS-Th, and POSS-TPTh, respectively. Fourier transform infrared spectroscopy and solid state ¹³C and ²⁹Si NMR spectroscopy confirmed their chemical structures. Thermogravimetric analysis revealed that, among these three systems, the POSS-Th POIP possessed the highest thermal stability (T₅: 586 °C; T₁₀: 785 °C; char yield: 90 wt%), presumably because of a strongly crosslinked network formed between its OVS and Th moieties. Furthermore, the specific capacity of the POSS-TPTh POIP (354 F g⁻¹) at 0.5 A g⁻¹ was higher than those of the POSS-Th (213 F g⁻¹) and POSS-OXD (119 F g⁻¹) POIPs. We attribute the superior electrochemical properties of the POSS-TPTh POIP to its high surface area and the presence of electron-rich phenyl groups within its structure.

A physicochemical introspection of porous organic polymer photocatalysts for wastewater treatment

A detailed physicochemical explanation for experimental observations is provided for POPs as powerful photocatalysts for organic transformations and wastewater decontamination.

Porous silsesquioxane cage and porphyrin nanocomposites: sensing and adsorption for heavy metals and anions

A porous silsesquioxane cage/porphyrin nanocomposite was designed as a dual fluorescent probe for the sensing and adsorption of both heavy metal ions and anions.

A POSS-Phosphazene Based Porous Material for Adsorption of Metal Ions from Water

The development of adsorptive materials continues to be an important area of research for removal of heavy metal ions from waste water. The adsorption capacity can be modulated by both physical and chemical modification of the adsorbent. Herein, we combine the unique properties of polyhedral oligomeric silsesquioxane (POSS) and organocyclophosphazene as the building units to synthesize a hybrid porous material, abbreviated as PN-POSS. The synthetic method follows a Heck reaction between hexa(4-bromophenoxy)cyclotriphosphazene and octavinylsilsesquioxane (OVS). The Brunauer-Emmett-Teller (BET) analysis shows that the material possesses micro- and mesopores of 1.5 and 3.8 nm size and a surface area on the order of 500 m²  g^-1 . These attributes in combination with the donor ability of the phosphazene units qualify the material for high adsorption of Pb²⁺ , Hg²⁺ and Cu²⁺ ions with maximal adsorption capacities on the order of 1326, 1927 and 2654 mg g^-1 , respectively. The adsorbent exhibits a good regeneration performance and can be effectively used for water treatment.

The Preparation and Chemical Structure Analysis of Novel POSS-Based Porous Materials

In this work, we reported the preparation and chemical analysis of novel polyhedral oligomeric silsesquioxane (POSS)-based porous materials, which were prepared according to Friedel-Crafts chloromethylation by using aluminum chloride as the catalyst and dichloromethane as the solvent. Through controlling the treatment solvent (water or methanol) and kinds of POSS, several materials with different morphologies were conveniently obtained. The chemical structure of porous materials was systematically characterized by Fourier-transform infrared (FTIR) spectra, ²⁹Si Nuclear Magnetic Resonance (NMR), ¹³C NMR, and X-ray photoelectron spectroscopy (XPS). The samples were further characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA) to study their crystallinity, morphology, and thermal properties, respectively. The work systematically demonstrated the chemical structure of the porous materials. Moreover, the advantages and disadvantages of the preparation method and typical properties of the material were evaluated through a comparative analysis with other related research works.

Anion identification using silsesquioxane cages

Anthracene-conjugated octameric silsesquioxane cages thermodynamically display intramolecular excimer formation, which can be used to identify anions through the change of fluorescence.

Anthracene-conjugated octameric silsesquioxane (AnSQ) cages, prepared via Heck coupling between octavinylsilsesquioxane (OVS) and 9-bromoanthracene, thermodynamically display intramolecular excimer emissions. More importantly, these hosts are sensitive to each anionic guest, thereby resulting in change of anthracene excimer formation, displaying the solvent-dependent fluorescence and allowing us to distinguish up to four ions such as F^–, OH^–, CN^– and PO₄^3– by fluorescence spectroscopy. Depending on the solvent polarity, for example, both F^– and CN^– quenched the fluorescence emission intensity in THF, but only F^– could enhance the fluorescence in all other solvents. The presence of PO₄^3– results in fluorescence enhancements in high polarity solvents such as DMSO, DMF, and acetone, while OH^– induces enhancements only in low polarity solvents (e.g. DCM and toluene). A picture of the anion recognizing ability of AnSQ was obtained through principal component analysis (PCA) with NMR and FTIR confirming the presence of host–guest interactions. Computational modeling studies demonstrate the conformation of host–guest complexation and also the change of excimer formation. Detection of F^–, CN^– and OH^– by AnSQ hosts in THF is noticeable with the naked eye, as indicated by strong color changes arising from charge transfer complex formation upon anion addition.

Novel fullerene-based porous materials constructed by a solvent knitting strategy

Here we choose a dihydronaphthyl-functionalized C₆₀ fullerene as a building block and utilize a novel solvent knitting strategy based on Friedel–Crafts alkylation reaction to construct two kinds of novel porous materials by using dichloromethane (DCM) and 1,2-dichloroethane (DCE) as solvents and external crosslinkers.

Fluorescence-Tuned Polyhedral Oligomeric Silsesquioxane-Based Porous Polymers

Two series of new polyhedral oligomeric silsesquioxane (POSS)-based fluorescent hybrid porous polymers, HPP-1 and HPP-2, have been prepared by the Heck reaction of octavinylsilsesquioxane with 2,2',7,7'-tetrabromo-9,9'-spirobifluorene and 1,3,6,8-tetrabromopyrene, respectively. Three sets of reaction conditions were employed to assess their effect on fluorescence. These materials exhibit tunable fluorescence from nearly no fluorescence to bright fluorescence both in the solid state and dispersed in ethanol under UV light irradiation by simply altering the reaction conditions. We speculated that the difference may be attributable to the fluorescence quenching induced by Et3 N, P(o-CH3 Ph)3 , and their hydrogen bromide salts employed in the reactions. This finding could give valuable suggestions for the construction of porous polymers with tunable/controllable fluorescence, especially those prepared by Heck and Sonogashira reactions in which these quenchers are used as organic bases or co-catalysts. In addition, the porosities can also be tuned, but different trends in porosity have been found in these two series of polymers, which suggests that various factors should be carefully considered in the preparation of porous polymers with tunable/controllable porosity. Furthermore, HPP-1 c showed moderate CO2 uptake and fluorescence that was efficiently quenched by nitroaromatic explosives, thereby indicating that these materials could be utilized as solid absorbents for the capture and storage of CO2 and as sensing agents for the detection of explosives.