Highly graphitized porous carbon/reduced graphene oxide for ultrahigh enrichment and ultrasensitive determination of polycyclic aromatic hydrocarbons

There is an urgent need to develop efficient and reliable coating materials for solid phase microextraction (SPME), in order to quantify and monitor pollutants in environmental waters. Herein, a highly graphitized porous carbon/reduced graphene oxide (PC/rGO) was successfully synthesized by pyrolysis of metal organic framework/graphene oxide precursors, and used as a SPME coating for ultrahigh enrichment of polycyclic aromatic hydrocarbons (PAHs) from water. The as-prepared PC/rGO exhibited high degree of graphitization, abundant number of micro/mesopores along with exceptional thermal stability, making it an ideal SPME coating material. The PC/rGO fiber offered an ultrahigh enrichment factor for PAHs (up to 126057), which could be attributed to the multiple interactions between the PC/rGO and PAHs, including hydrophobic and π-π interactions, partitioning, and mesopore filling effect. In the analysis of PAHs, the PC/rGO fiber showed a wide linearity (0.007-100 ng mL-1), low limits of detection (0.0005-0.005 ng mL-1), and good repeatability (RSDs <10.1%, n = 5) under optimized conditions. The established method was applicable for ultrasensitive determination of PAHs in different environmental waters and showed satisfactory recoveries. This study provides a novel way for constructing thermally stable SPME coating having efficient extraction performance.

Sponge-like porous manganese(II, III) oxide as a coating for solvent-assisted solid-phase microextraction of polycyclic aromatic hydrocarbons followed by gas chromatography-mass spectrometry

A nanostructure sponge-like porous manganese(II, III) oxide was synthesized and applied as a new fiber coating for solvent-assisted solid-phase microextraction. The synthesized material was characterized via Fourier-transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, X-ray diffraction, and N₂ adsorption/desorption techniques. To investigate the extraction performance of the prepared material, direct immersion solid-phase microextraction followed by gas chromatography-mass spectrometry was used for the determination of the selected polycyclic aromatic hydrocarbons in wastewater samples. Three polycyclic aromatic hydrocarbons including 1-methylnaphthalene, anthracene, and pyrene were selected as model analytes. To maximize the sensitivity of the method, key experimental factors affecting the extraction efficiency of the analytes such as ionic strength, extraction solvent, stirring rate, extraction temperature and time, and desorption temperature and time were optimized. The applicability of the new coating material for the extraction of the selected analytes from wastewater samples was evaluated. Under the optimum conditions, detection limits between 0.7 and 1.5 ng L^-1 were obtained for the model analytes. The linear dynamic range was 5.0-3.0 × 10³ ng L^-1 for all the analytes. Relative standard deviations were between 2 and 11%. In the case of real sample analysis, the extraction recoveries of the analytes were obtained in the range of 77-111%.

On the use of metal-organic frameworks for the extraction of organic compounds from environmental samples

The determination of trace metals and organic contaminants in environmental samples, such as water, air, soil, and sediment, is until today a challenging process for the analytical chemistry. Metal-organic frameworks (MOFs) are novel porous nanomaterials that are composed of metal ions and an organic connector. These materials are gaining more and more attention due to their superior characteristics, such as high surface area, tunable pore size, mechanical and thermal stability, luminosity, and charge transfer ability between metals and ligands. Among the various applications of MOFs are gas storage, separation, catalysis, and drug delivery. Recently, MOFs have been successfully introduced in the field of sample preparation for analytical chemistry and they have been used for sample pretreatment of various matrices. This review focuses on the applications of MOFs as novel adsorbents for the extraction of organic compounds from environmental samples.

Recent Advances in Affinity MOF-Based Sorbents with Sample Preparation Purposes

This review summarizes the recent advances concerning metal-organic frameworks (MOFs) modified with several biomolecules (e.g., amino acids, nucleobases, proteins, antibodies, aptamers, etc.) as ligands to prepare affinity-based sorbents for application in the sample preparation field. The preparation and incorporation strategies of these MOF-based affinity materials were described. Additionally, the different types of ligands that can be employed for the synthesis of these biocomposites and their application as sorbents for the selective extraction of molecules and clean-up of complex real samples is reported. The most important features of the developed biocomposites will be discussed throughout the text in different sections, and several examples will be also commented on in detail.

Recent Advances in the Extraction of Polycyclic Aromatic Hydrocarbons from Environmental Samples

Polycyclic aromatic hydrocarbons (PAHs) comprise a group of chemical compounds consisting of two or more fused benzene rings. PAHs exhibit hydrophobicity and low water solubility, while some of their members are toxic substances resistant to degradation. Due to their low levels in environmental matrices, a preconcentration step is usually required for their determination. Nowadays, there is a wide variety of sample preparation techniques, including micro-extraction techniques (e.g., solid-phase microextraction and liquid phase microextraction) and miniaturized extraction techniques (e.g., dispersive solid-phase extraction, magnetic solid-phase extraction, stir bar sorptive extraction, fabric phase sorptive extraction etc.). Compared to the conventional sample preparation techniques, these novel techniques show some benefits, including reduced organic solvent consumption, while they are time and cost efficient. A plethora of adsorbents, such as metal-organic frameworks, carbon-based materials and molecularly imprinted polymers, have been successfully coupled with a wide variety of extraction techniques. This review focuses on the recent advances in the extraction techniques of PAHs from environmental matrices, utilizing novel sample preparation approaches and adsorbents.

Recent Progress on Luminescent Metal-Organic Framework-Involved Hybrid Materials for Rapid Determination of Contaminants in Environment and Food

The high speed of contaminants growth needs the burgeoning of new analytical techniques to keep up with the continuous demand for monitoring and legislation on food safety and environmental pollution control. Metal-organic frameworks (MOFs) are a kind of advanced crystal porous materials with controllable apertures, which are self-assembled by organic ligands and inorganic metal nodes. They have the merits of large specific surface areas, high porosity and the diversity of structures and functions. Latterly, the utilization of metal-organic frameworks has attracted much attention in environmental protection and the food industry. MOFs have exhibited great value as sensing materials for many targets. Among many sensing methods, fluorometric sensing is one of the widely studied methods in the detection of harmful substances in food and environmental samples. Fluorometric detection based on MOFs and its functional materials is currently one of the most key research subjects in the food and environmental fields. It has gradually become a hot research direction to construct the highly sensitive rapid sensors to detect harmful substances in the food matrix based on metal-organic frameworks. In this paper, we introduced the synthesis and detection application characteristics (absorption, fluorescence, etc.) of metal-organic frameworks. We summarized their applications in the MOFs-based fluorometric detection of harmful substances in food and water over the past few years. The harmful substances mainly include heavy metals, organic pollutants and other small molecules, etc. On this basis, the future development and possible application of the MOFs have prospected in this review paper.

Critical review of micro-extraction techniques used in the determination of polycyclic aromatic hydrocarbons in biological, environmental and food samples

Polycyclic Aromatic Hydrocarbons (PAHs) are ubiquitous environmental contaminants and their accurate determination is very important to human health and environment safety. In this review, sorptive-based micro-extraction techniques [such as Solid-Phase Micro-extraction (SPME), Stir Bar Sorptive Extraction (SBSE), Micro-extraction in Packed Sorbent (MEPS)] and solvent-based micro-extraction [Membrane-Mediated Liquid-Phase Micro-extraction (MM-LPME), Dispersive Liquid-Liquid Micro-extraction (DLLME), and Single Drop Micro-extraction (SDME)] developed for quantification of PAHs in environmental, biological and food samples are reviewed. Moreover, recent micro-extraction techniques that have been coupled with other sample extraction strategies are also briefly discussed. The main objectives of these micro-extraction techniques are to perform extraction, pre-concentration and clean up together as one step, and the reduction of the analysis time, cost and solvent following the green chemistry guidelines.

Metal–Organic Frameworks as Key Materials for Solid-Phase Microextraction Devices—A Review

Metal–organic frameworks (MOFs) have attracted recently considerable attention in analytical sample preparation, particularly when used as novel sorbent materials in solid-phase microextraction (SPME). MOFs are highly ordered porous crystalline structures, full of cavities. They are formed by inorganic centers (metal ion atoms or metal clusters) and organic linkers connected by covalent coordination bonds. Depending on the ratio of such precursors and the synthetic conditions, the characteristics of the resulting MOF vary significantly, thus drifting into a countless number of interesting materials with unique properties. Among astonishing features of MOFs, their high chemical and thermal stability, easy tuneability, simple synthesis, and impressive surface area (which is the highest known), are the most attractive characteristics that makes them outstanding materials in SPME. This review offers an overview on the current state of the use of MOFs in different SPME configurations, in all cases covering extraction devices coated with (or incorporating) MOFs, with particular emphases in their preparation.

Polydopamine-assisted attachment of β-cyclodextrin onto iron oxide/silica core-shell nanoparticles for magnetic dispersive solid phase extraction of aromatic molecules from environmental water samples

Pollution monitoring in a contaminated environmental water samples is a big challenge. In this article, immobilization of β-cyclodextrin molecules onto the magnetic core-shell silica nanoparticles was conducted by using adhesive properties of polydopamine. The synthesis path was included of three steps: producing Fe₃O₄ nanoparticles as a core, coating the cores with a silica layer, and further coating with β-cyclodextrin molecules. The structural characteristics of the synthesized nanocomposite were investigated by using attenuated total reflection-Fourier transform infrared spectroscopy, x-ray diffraction analysis, field emission scanning microscopy, transmission electron microscopy, dynamic light scattering, vibrating-sample magnetometer and energy-dispersive X-ray spectroscopy. Afterwards, obtained nanocomposite was used to extract eight polycyclic aromatic hydrocarbons from environmental water samples. Results were demonstrated that analyts with different chemical structures had different extraction manners during the process. Important effective parameters on the extraction efficiency; such as sorbent type and mass, desorption solvent (type and volume), salt concentration and the time of extraction & desorption; were investigated. Under the optimum operating conditions, good linearity within the range of 1-1000 ng/mL was obtained while coefficient of determination (r²) was in the range of 0.990-0.998. The limits of detection were between 0.04 and 0.57 ng/mL, and the enrichment factor was found to be 21-90. This nanocomposite was also applied for the extraction and enrichment of aromatic analytes from the canal and rain water samples prior to gas chromatography analysis.

Covalent immobilization of covalent organic framework on stainless steel wire for solid-phase microextraction GC-MS/MS determination of sixteen polycyclic aromatic hydrocarbons in grilled meat samples

Covalent organic framework TpBD was grafted on stainless steel wire with polydopamine as a linker. The fabricated TpBD bonded stainless steel wire was used as the solid-phase microextraction fiber to extract sixteen polycyclic aromatic hydrocarbons (PAHs) for subsequent GC-MS/MS determination in grilled meat samples. The developed method gave the limits of detection (S/N = 3) from 0.02 (pyrene)-1.66 (naphthalene) ng L^-1 and enhancement factors from 1069 (naphthalene)-10879 (benz(a)anthracene). The relative standard deviations (RSDs) for intra-day and inter-day study are in the range of 2.6%-8.5% and 4.5%-9.4%, respectively. The fiber-to-fiber RSDs for three parallel prepared fibers were 5.3%-10.0%. One TpBD bonded fiber can stand at least 200 cycles without significant loss of extraction efficiency. The developed method was successfully applied for the determination of trace PAHs in grilled meat samples with recoveries from 85.1% to 102.8%.

Micro-solid phase extraction of some polycyclic aromatic hydrocarbons from environmental water samples using magnetic β-cyclodextrin-carbon nano-tube composite as a sorbent

Previous studies have demonstrated the excellent capability of the cyclodextrins in pre-concentration of the organic pollutants from the aqueous solutions. In this work, β-cyclodextrin- multiwalled carbon nano-tube composite was produced from the reaction of oxidized carbon nano-tube with cyclodextrin in the presence of the hydrazine hydrate, and subsequently attaching this composite to the iron oxide nano-particles. Prepared magnetic nano-composite was characterized by the attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), the thermogravimetric analysis (TGA), the field emission scanning electron microscopy (FESEM), and the X-ray diffraction (XRD). This composite was applied to extract seven polycyclic aromatic hydrocarbons (PAHs) from the environmental water samples as follows: naphthalene, acenaphthene, fluorene, phenanthrene, fluoranthene, pyrene and benzo[a]pyrene. Analytes analysis was performed using the gas chromatography (GC) followed by the flame ionization detection (FID), and the predominant parameters influencing the extraction efficiency were investigated thoroughly. Under the optimized extraction conditions, the enrichment factor (EF) was ranging from 41.3 to 49.3 (EF_max = 50.0), and a suitable linearity was obtained (R² = 0.992-0.997) within the range of 2.0-1000 ng/mL. The limits of the quantification and detection were 2.0-10.0 and 0.6-3.0 ng/mL, respectively. Finally, the synthesized magnetic sorbent and method were successfully utilized for the analysis of rain, well and agricultural water samples. The relative recoveries were ranging from 75.3-107.0% with an acceptable precision (5.5-8.3%) for PAHs extraction.

Metal–organic frameworks for dye sorption: structure–property relationships and scalable deposition of the membrane adsorber

The metal–organic framework-based membrane adsorber is applied to sorption of dye molecules.

Recent applications of metal-organic frameworks in sample pretreatment

Metal-organic frameworks are promising materials in diverse analytical applications especially in sample pretreatment by virtue of their diverse structure topology, tunable pore size, permanent nanoscale porosity, high surface area, and good thermostability. According to hydrostability, metal-organic frameworks are divided into moisture-sensitive and water-stable types. In the actual applications, both kinds of metal-organic frameworks are usually engineered into hybrid composites containing magnetite, silicon dioxide, graphene, or directly carbonized to metal-organic frameworks derived carbon. These metal-organic frameworks based materials show good extraction performance to environmental pollutants. This review provides a critical overview of the applications of metal-organic frameworks and their composites in sample pretreatment modes, that is, solid-phase extraction, magnetic solid-phase extraction, micro-solid-phase extraction, solid-phase microextraction, and stir bar solid extraction.

Metal-Organic Framework-Polymer Composite as a Highly Efficient Sorbent for Sulfonamide Adsorption and Desorption: Effect of Coordinatively Unsaturated Metal Site and Topology

In this study, we first demonstrated the effect of two types of metal-organic framework-polymer (MOF-polymer) monoliths on in-tube solid-phase microextraction (IT-SPME) of sulfonamides. Sulfonamides were successfully adsorbed onto MIL-101(Cr)-polymer but were difficult to elute due to these sulfonamides could interact via Lewis acid-base interaction with the presence of Cr(III) coordinatively unsaturated metal sites (CUS). Moreover, the cage-type topology of MIL-101(Cr) that could produce multiple pathways thus complicates the desorption of the test analytes from the sorbent. Contrastingly, MIL-53(Al)-polymer provided weaker Al(III) CUS, and its one-dimensional channel pore structure could provide an unhindered pathway for sulfonamides transfer during elution. After optimizing the IT-SPME condition such as MOF content, pH of sample matrix, column length, extraction flow rate, and elution volume, the calculated extraction recovery of sulfonamides in MIL-53(Al)-polymer as analyzed by microemulsion electrokinetic chromatography (MEEKC) were in the range of 40%-90% with relative standard deviations (RSDs) below 5% and a reusability of at least 30 times.

Rapid collection and re-dispersion of MOF particles by a simple and versatile method using a thermo-responsive polymer

An easy but versatile method for fast thermal-responsive dispersion and collection of MOF particles in water.

A nanoporous carbon material derived from pomelo peels as a fiber coating for solid-phase microextraction

A novel nanoporous carbon derived from a biomass source was prepared and used as an SPME fiber coating.