Metal-free dehydrogenation of formic acid to H2 and CO2 using boron-based catalysts

Conversion of Biomass-Derived Levulinic Acid into γ-Valerolactone Using Methanesulfonic Acid: An Optimization Study Using Response Surface Methodology

γ-Valerolactone (GVL) is a platform chemical for the synthesis of both biofuels and biochemicals. The LA production from depithed sugarcane bagasse (DSB) resulted in a 55% LA yield, and the resulting LA was used to produce GVL. The effect of process parameters, namely, temperature (25–200 °C), time (2–10 h), and catalyst loading (0.5–5 g) were investigated for the GVL production from LA. Thereafter, the optimized conditions were used to produce GVL from LA derived from depithed sugarcane bagasse (DSB) yielded a GVL of 77.6%. The hydrogen required for the reduction of LA to GVL was formed in situ by formic acid and triethylamine in the presence of methanesulfonic acid (MsOH). Different solvents (including water and alcohols) were also tested to determine their effect on GVL yield, and water yielded the highest GVL of 78.6%. Different types of catalysts, which included mineral acids and ionic liquids, were used to determine their effect on GVL yield, and to provide a benchmark against MsOH. The GVL yield from DSB-derived LA is 1.0% lower than the GVL yield from a commercial sample of LA. LA generated from DSB has the potential to replace fossil fuel-derived LA.

Dehydrogenation of Formic Acid Using Iridium-NSi Species as Catalyst Precursors

Using a low loading of the iridium(III) complexes [Ir(CF3SO3)(κ2-NSiiPr)2] (1) (NSiiPr = (4-methylpyridin-2-iloxy)diisopropylsilyl and [{Ir(κ2-NSiMe)2}2(µ-CF3SO3)2] (2) (NSiMe = (4-methylpyridin-2-iloxy)dimethylsilyl) in presence of Et3N, it has been possible to achieve the...

The transition metal-catalysed hydroboration reaction

This review covers the development of the transition metal-catalysed hydroboration reaction, from its beginnings in the 1980s to more recent developments including earth-abundant catalysts and an ever-expanding array of substrates.

Advances in Nonprecious Metal Homogeneously Catalyzed Formic Acid Dehydrogenation

Formic acid (FA) possesses a high volumetric concentration of H2 (53 g L−1). Moreover, it can be easily prepared, stored, and transported. Therefore, FA stands out as a potential liquid organic hydrogen carrier (LOHC), which allows storage and transportation of hydrogen in a safe way. The dehydrogenation to produce H2 and CO2 competes with its dehydration to give CO and H2O. For this reason, research on selective catalytic FA dehydrogenation has gained attention in recent years. Several examples of highly active homogenous catalysts based on precious metals effective for the selective dehydrogenation of FA have been reported. Among them are the binuclear iridium-bipyridine catalysts described by Fujita and Himeda et al. (TOF = 228,000 h−1) and the cationic species [IrClCp*(2,2′-bi-2-imidazoline)]Cl (TOF = 487,500 h−1). However, examples of catalytic systems effective for the solventless dehydrogenation of FA, which is of great interest since it allows to reduce the reaction volume and avoids the use of organic solvents that could damage the fuel cell, are scarce. In this context, the development of transition metal catalysts based on cheap and easily available nonprecious metals is a subject of great interest. This work contains a summary on the state of the art of catalytic dehydrogenation of FA in homogeneous phase, together with an account of the catalytic systems based on non-precious metals so far reported.

Mesoionic N-heterocyclic olefin catalysed reductive functionalization of CO2 for consecutive N-methylation of amines

A mesoionic N-heterocyclic olefin (mNHO) was introduced as a metal-free catalyst for the reductive functionalization of CO2 leading to consecutive double N-methylation of primary amines in the presence of 9-borabicyclo[3.3.1]nonane (9-BBN). A wide range of secondary amines and primary amines were successfully methylated under mild conditions. The catalyst sustained over six successive cycles of N-methylation of secondary amines without compromising its activity, which encouraged us to check its efficacy towards double N-methylation of primary amines. Moreover, this method was utilized for the synthesis of two commercially available drug molecules. A detailed mechanistic cycle was proposed by performing a series of control reactions along with the successful characterisation of active catalytic intermediates either by single-crystal X-ray study or by NMR spectroscopic studies in association with DFT calculations.

Deciphering the Mechanistic Details of Manganese-Catalyzed Formic Acid Dehydrogenation: Insights from DFT Calculations

A comprehensive density functional theory investigation has been carried out to unravel the complete mechanistic landscape of aqueous-phase formic acid dehydrogenation (FAD) catalyzed by a pyridyl-imidazoline-based Mn(I) catalyst [Mn(PY-^NHIM)(CO)₃Br], which was recently reported by Beller and co-workers. The computed free energy profiles show that for the production of a Mn-formate intermediate [Mn(HCO₂^-)], a stepwise mechanism is both kinetically and thermodynamically favorable compared to the concerted mechanism. This stepwise mechanism involves the dissociation of a Br^- ion from a Mn-bromide complex [Mn(Br)] to create a vacant site and coordination of water solvent to this vacant site, followed by the dissociative exchange of the aqua ligand with the formate ion to form Mn(HCO₂^-). Non-covalent interaction analysis revealed that the steric hindrance at the transition state is the cardinal reason for the preference to a stepwise mechanism. The β-hydride elimination process was estimated to be the rate-determining step with a barrier of 19.0 kcal/mol. This confirms the experimental observation. The generation of a dihydrogen-bound complex was found to occur through the protonation of Mn-hydride by a hydronium ion instead of formic acid. The mechanistic details and insights presented in this work would promote future catalytic designing and exploration of earth-abundant Mn-based catalytic systems for potential applications toward FAD.

Formic Acid as a Potential On-Board Hydrogen Storage Method: Development of Homogeneous Noble Metal Catalysts for Dehydrogenation Reactions

Hydrogen can be used as an energy carrier for renewable energy to overcome the deficiency of its intrinsically intermittent supply. One of the most promising application of hydrogen energy is on-board hydrogen fuel cells. However, the lack of a safe, efficient, convenient, and low-cost storage and transportation method for hydrogen limits their application. The feasibility of mainstream hydrogen storage techniques for application in vehicles is briefly discussed in this Review. Formic acid (FA), which can reversibly be converted into hydrogen and carbon dioxide through catalysis, has significant potential for practical application. Historic developments and recent examples of homogeneous noble metal catalysts for FA dehydrogenation are covered, and the catalysts are classified based on their ligand types. The Review primarily focuses on the structure-function relationship between the ligands and their reactivity and aims to provide suggestions for designing new and efficient catalysts for H₂ generation from FA.

Highly efficient additive-free dehydrogenation of neat formic acid

Formic acid (FA) is a promising hydrogen carrier which can play an instrumental role in the overall implementation of a hydrogen economy. In this regard, it is important to generate H₂ gas from neat FA without any solvent/additive, for which existing systems are scarce. Here we report the remarkable catalytic activity of a ruthenium 9H-acridine pincer complex for this process. The catalyst is unusually stable and robust in FA even at high temperatures and can catalyse neat FA dehydrogenation for over a month, with a total turnover number of 1,701,150, while also generating high H₂/CO₂ gas pressures (tested up to 100 bars). Mechanistic investigations and DFT studies are conducted to fully understand the molecular mechanism to the process. Overall, the high activity, stability, selectivity, simplicity and versatility of the system to generate a CO-free H₂/CO₂ gas stream and high pressure from neat FA makes it promising for large-scale implementation.

Rapid Organocatalytic Formation of Carbon Monoxide: Application towards Carbonylative Cross Couplings

Herein, the first organocatalytic method for the transformation of non‐derivatized formic acid into carbon monoxide (CO) is introduced. Formylpyrrolidine (FPyr) and trichlorotriazine (TCT), which is a cost‐efficient commodity chemical, enable this decarbonylation. Utilization of dimethylformamide (DMF) as solvent and catalyst even allows for a rapid CO generation at room temperature. Application towards four different carbonylative cross coupling protocols demonstrates the high synthetic utility and versatility of the new approach. Remarkably, this also comprehends a carbonylative Sonogashira reaction at room temperature employing intrinsically difficult electron‐deficient aryl iodides. Commercial ¹³C‐enriched formic acid facilitates the production of radiolabeled compounds as exemplified by the pharmaceutical Moclobemide. Finally, comparative experiments verified that the present method is highly superior to other protocols for the activation of carboxylic acids.

Manganese(i) κ2-NN complex-catalyzed formic acid dehydrogenation

This work updates the first non-phosphine-based Mn complex able to perform the formic acid dehydrogenation (FA DH) in the presence of amines. Significant improvements were achieved regarding TON (>7500), gas evolution (>20 L), and lower CO content.

Transition-Metal-Free Acceptorless Decarbonylation of Formic Acid Enabled by a Liquid Chemical-Looping Strategy

The selective decarbonylation of formic acid was achieved under transition-metal-free conditions. Using a liquid chemical-looping strategy, the thermodynamically favored dehydrogenation of formic acid was shut down, yielding a pure stream of CO with no H₂ or CO₂ contamination. The transformation involves a two-step sequence where methanol is used as a recyclable looping agent to yield methylformate, which is subsequently decomposed to carbon monoxide using alkoxides as catalysts.

CO2-based hydrogen storage – formic acid dehydrogenation

Changing demands on the energy landscape are causing the need for sustainable approaches. The shift toward alternative, renewable energy sources is closely associated with new demands for energy storage and transportation. Besides storage of electrical energy, also storage of energy by generating and consuming hydrogen (H2) is possible and highly attractive. Notably, both secondary energy vectors, electric energy and hydrogen, have practical advantages so that one should not ask “which one is better?” but “which one fits better the specific application?”

Molecular hydrogen can be stored reversibly in form of formic acid (FA, HCOOH). In the presence of suitable catalysts, FA can be selectively decomposed to hydrogen and carbon dioxide (CO2). A CO2-neutral hydrogen storage cycle can be achieved when carbon dioxide serves as starting material for the production of the FA. Examples of CO2 hydrogenation to FA are known in the literature. Herein, the formal reverse reaction, the decomposition of FA to H2 and CO2 by different catalyst systems is reviewed and selected examples for reversible storage applications based on FA as hydrogen storage compound are discussed.

Transforming atmospheric CO2 into alternative fuels: a metal-free approach under ambient conditions

This work demonstrates the first-ever completely metal-free approach to the capture of CO₂ from air followed by reduction to methoxyborane (which produces methanol on hydrolysis) or sodium formate (which produces formic acid on hydrolysis) under ambient conditions. This was accomplished using an abnormal N-heterocyclic carbene (aNHC)-borane adduct. The intermediate involved in CO₂ capture (aNHC-H, HCOO, B(OH)₃) was structurally characterized by single-crystal X-ray diffraction. Interestingly, the captured CO₂ can be released by heating the intermediate, or by passing this compound through an ion-exchange resin. The capture of CO₂ from air can even proceed in the solid state via the formation of a bicarbonate complex (aNHC-H, HCO₃, B(OH)₃), which was also structurally characterized. A detailed mechanism for this process is proposed based on tandem density functional theory calculations and experiments.

Conformational twisting of a formate-bridged diiridium complex enables catalytic formic acid dehydrogenation

We previously reported that iridium complex 1a enables the first homogeneous catalytic dehydrogenation of neat formic acid and enjoys unusual stability through millions of turnovers. Binuclear iridium hydride species 5a, which features a provocative C2-symmetric geometry, was isolated from the reaction as a catalyst resting state. By synthesizing and carefully examining the catalytic initiation of a series of analogues to 1a, we establish here a strong correlation between the formation of C2-twisted iridium dimers analogous to 5a and the reactivity of formic acid dehydrogenation: an efficient C2 twist appears unique to 1a and essential to catalytic reactivity.

Towards Hydrogen Storage through an Efficient Ruthenium-Catalyzed Dehydrogenation of Formic Acid

Hydrogen is of fundamental importance for the construction of modern clean-energy supply systems. In this context, the catalytic dehydrogenation of formic acid (FA) is a convenient method to generate H₂ gas from an easily available liquid. One of the issues associated with current catalytic dehydrogenation systems is insufficient stability. Here, we present a robust and recyclable system for FA dehydrogenation by combining a ruthenium 1,1,1-tris(diphenylphosphinomethyl)ethane complex and aluminum trifluoromethanesulfonate (Al(OTf)₃ ). This robust system allows steady H₂ production under pressure and recycling for an additional 14 runs without any apparent loss of activity (turnover frequencies up to 1920 h^-1 , turnover numbers up to 20 000). Notably, the catalyst can also be used for the dehydrogenation of formates and the reverse hydrogenation of bicarbonates and CO₂ .

The broadening reach of frustrated Lewis pair chemistry

The revelation that combinations of Lewis acids and bases for which dative bonding is impeded can activate dihydrogen led to the concept of "frustrated Lewis pairs" (FLPs). Over the past decade, a range of FLP systems and substrate molecules have precipitated a paradigm change in main-group chemistry and metal-free catalysis. The FLP motif has also found application in a growing body of chemical problems in organic synthesis, transition metal and free radical chemistry, materials, enzymatic models, and surface chemistry. The current state of FLP chemistry is assessed herein, and the outlook for the future considered.

Mechanism of Nickel-Catalyzed Selective C-N Bond Activation in Suzuki-Miyaura Cross-Coupling of Amides: A Theoretical Investigation

In textbooks, the low reactivity of amides is attributed to the strong resonance stability. However, Garg and co-workers recently reported the Ni-catalyzed activation of robust amide C-N bonds, leading to conversions of amides into esters, ketones, and other amides with high selectivity. Among them, the Ni-catalyzed Suzuki-Miyaura coupling (SMC) of N-benzyl-N-tert-butoxycarbonyl (N-Bn-N-Boc) amides with pinacolatoboronate (PhBpin) was performed in the presence of K₃PO₄ and water. Water significantly enhanced the reaction. With the aid of density functional theory (DFT) calculations, the present study explored the mechanism of the aforementioned SMC reaction as well as analyzed the weakening of amide C-N bond by N-functionalization. The most favorable pathway includes four basic steps: oxidative addition, protonation, transmetalation, and reductive elimination. Comparing the base- and water-free process, the transmetalation step with the help of K₃PO₄ and water is significantly more facile. Water efficiently protonates the basic N(Boc) (Bn) group to form a neutral HN(Boc) (Bn), which is easily removed. The transmetalation step is the rate-determining step with an energy barrier of 25.6 kcal/mol. Further, a DFT prediction was carried out to investigate the full catalytic cycle of a cyclic (amino) (aryl)carbene in the Ni-catalyzed SMC of amides, which provided clues for further design of catalysts.

Metal-Free Reduction of CO2 to Methoxyborane under Ambient Conditions through Borondiformate Formation

An abnormal N-heterocyclic carbene (aNHC) based homogeneous catalyst has been used for the reduction of carbon dioxide to methoxyborane in the presence of a range of hydroboranes under ambient conditions and resulted in the highest turnover number of 6000. A catalytically active reaction intermediate, [aNHC-H⋅9BBN(OCOH)₂ ] was structurally characterized and authenticated by NMR spectroscopy. A detailed mechanistic cycle of this catalytic process via borondiformate formation has been proposed from tandem experimental and computational experiments.

Metal-free disproportionation of formic acid mediated by organoboranes

In the presence of dialkylboranes, formic acid is converted to formaldehyde and methanol derivatives. This is the first example of formate disproportionation under metal-free conditions. Mechanistic studies highlight the role of transient borohydrides in the reduction of formates and this is further shown in transfer hydroboration for aldehyde reduction.

In the presence of dialkylboranes, formic acid can be converted to formaldehyde and methanol derivatives without the need for an external reductant. This reactivity, in which formates serve as the sole carbon and hydride sources, represents the first example of the disproportionation of formate anions under metal-free conditions. Capitalizing on both experimental and computational (DFT) mechanistic considerations, the role of transient borohydride is highlighted in the reduction of formates and this reactivity was further exemplified in the methylation of TMP (2,2,6,6-tetramethylpiperidine) and in the transfer hydroboration reactions for the reduction of aldehydes.

Diverse reactivity of borenium cations with >N–H compounds

The P-stabilized borenium 1 displays rich reactivity towards >N–H compounds: substitution reaction at a borenium center with Ph₂NH, Lewis adduct formation and subsequent deprotonation with NH₃, B–Mes cleavage and formation of a dicationic species with HNTf₂.

Carbon-based two electron σ-donor ligands beyond classical N-heterocyclic carbenes

Recent advances in N-heterocyclic carbene-derived carbon-based two electron σ-donor ligands are presented in this perspective.

Hydrogen energy future with formic acid: a renewable chemical hydrogen storage system

Formic acid, the simplest carboxylic acid, could serve as one of the better fuels for portable devices, vehicles and other energy-related applications in the future.

Photocatalytic Formic Acid Conversion on CdS Nanocrystals with Controllable Selectivity for H2 or CO

Formic acid is considered a promising energy carrier and hydrogen storage material for a carbon-neutral economy. We present an inexpensive system for the selective room-temperature photocatalytic conversion of formic acid into either hydrogen or carbon monoxide. Under visible-light irradiation (λ>420 nm, 1 sun), suspensions of ligand-capped cadmium sulfide nanocrystals in formic acid/sodium formate release up to 116±14 mmol H2 g(cat)(-1) h(-1) with >99% selectivity when combined with a cobalt co-catalyst; the quantum yield at λ=460 nm was 21.2±2.7%. In the absence of capping ligands, suspensions of the same photocatalyst in aqueous sodium formate generate up to 102±13 mmol CO g(cat)(-1) h(-1) with >95% selectivity and 19.7±2.7% quantum yield. H2 and CO production was sustained for more than one week with turnover numbers greater than 6×10(5) and 3×10(6), respectively.