An efficiently tuned d-orbital occupation of IrO2 by doping with Cu for enhancing the oxygen evolution reaction activity

Toward Realistic Models of the Electrocatalytic Oxygen Evolution Reaction

The electrocatalytic oxygen evolution reaction (OER) supplies the protons and electrons needed to transform renewable electricity into chemicals and fuels. However, the OER is kinetically sluggish; it operates at significant rates only when the applied potential far exceeds the reversible voltage. The origin of this overpotential is hidden in a complex mechanism involving multiple electron transfers and chemical bond making/breaking steps. Our desire to improve catalytic performance has then made mechanistic studies of the OER an area of major scientific inquiry, though the complexity of the reaction has made understanding difficult. While historically, mechanistic studies have relied solely on experiment and phenomenological models, over the past twenty years ab initio simulation has been playing an increasingly important role in developing our understanding of the electrocatalytic OER and its reaction mechanisms. In this Review we cover advances in our mechanistic understanding of the OER, organized by increasing complexity in the way through which the OER is modeled. We begin with phenomenological models built using experimental data before reviewing early efforts to incorporate ab initio methods into mechanistic studies. We go on to cover how the assumptions in these early ab initio simulations─no electric field, electrolyte, or explicit kinetics─have been relaxed. Through comparison with experimental literature, we explore the veracity of these different assumptions. We summarize by discussing the most critical open challenges in developing models to understand the mechanisms of the OER.

Optimal Electrocatalyst Design Strategies for Acidic Oxygen Evolution

Hydrogen, a clean resource with high energy density, is one of the most promising alternatives to fossil. Proton exchange membrane water electrolyzers are beneficial for hydrogen production because of their high current density, facile operation, and high gas purity. However, the large-scale application of electrochemical water splitting to acidic electrolytes is severely limited by the sluggish kinetics of the anodic reaction and the inadequate development of corrosion- and highly oxidation-resistant anode catalysts. Therefore, anode catalysts with excellent performance and long-term durability must be developed for anodic oxygen evolution reactions (OER) in acidic media. This review comprehensively outlines three commonly employed strategies, namely, defect, phase, and structure engineering, to address the challenges within the acidic OER, while also identifying their existing limitations. Accordingly, the correlation between material design strategies and catalytic performance is discussed in terms of their contribution to high activity and long-term stability. In addition, various nanostructures that can effectively enhance the catalyst performance at the mesoscale are summarized from the perspective of engineering technology, thus providing suitable strategies for catalyst design that satisfy industrial requirements. Finally, the challenges and future outlook in the area of acidic OER are presented.

Recent Advances in Iridium-based Electrocatalysts for Acidic Electrolyte Oxidation

Ongoing research to develop advanced electrocatalysts for the oxygen evolution reaction (OER) is needed to address demand for efficient energy conversion and carbon-free energy sources. In the OER process, acidic electrolytes have higher proton concentration and faster response than alkaline ones, but their harsh strongly acidic environment requires catalysts with greater corrosion and oxidation resistance. At present, iridium oxide (IrO2) with its strong stability and excellent catalytic performance is the catalyst of choice for the anode side of commercial PEM electrolysis cells. However, the scarcity and high cost of iridium (Ir) and the unsatisfactory activity of IrO2 hinder industrial scale application and the sustainable development of acidic OER catalytic technology. This highlights the importance of further research on acidic Ir-based OER catalysts. In this review, recent advances in Ir-based acidic OER electrocatalysts are summarized, including fundamental understanding of the acidic OER mechanism, recent insights into the stability of acidic OER catalysts, highly efficient Ir-based electrocatalysts, and common strategies for optimizing Ir-based catalysts. The future challenges and prospects of developing highly effective Ir-based catalysts are also discussed.

Nitrogen Doping-Roused Synergistic Active Sites in Perovskite Enabling Highly Selective CO2 Photoreduction into CH4

The intricate protonation process in carbon dioxide reduction usually makes the product unpredictable. Thus, it is significant to control the reactive intermediates to manipulate the reaction steps. Here, we propose that the synergistic La-Ti active sites in the N-La2Ti2O7 nanosheets enable the highly selective carbon dioxide photoreduction into methane. In the photoreduction of CO2 over N-La2Ti2O7 nanosheets, in situ Fourier transform infrared spectra are utilized to monitor the *CH3O intermediate, pivotal for methane production, whereas such monitoring is not conducted for La2Ti2O7 nanosheets. Also, theoretical calculations testify to the increased charge densities on the Ti and La atoms and the regulated formation energy barrier of *CO and *CH3O intermediates by the constructed synergistic active sites. Accordingly, the methane formation rate of 7.97 μL h-1 exhibited by the N-La2Ti2O7 nanosheets, along with an electron selectivity of 96.6%, exceeds that of most previously reported catalysts under similar conditions.

Novel sulfate solid supported binary Ru-Ir oxides for superior electrocatalytic activity towards OER and CER

Electrolysis for producing hydrogen powered by renewable electricity can be dramatically expanded by adapting different electrolytes (brine, seawater or pure water), which means the anode materials must stand up to complex electrolyte conditions. Here, a novel catalyst/support hybrid of binary Ru3.5Ir1Ox supported by barium strontium sulfate (BaSrSO4) was synthesized (RuIrOx/BSS) by exchanging the anion ligands of support. The as-synthesized RuIrOx/BSS exhibits compelling oxygen evolution (OER) and chlorine evolution (CER) performances, which affords to 10 mA cm-2 with only overpotential of 244 mV and 38 mV, respectively. The performed X-ray adsorption spectra clearly indicate the presence of an interface charge transfer effect, which results in the assignment of more electrons to the d orbitals of the Ru and Ir sites. The theoretical calculations demonstrated that the electronic structures of the catalytic active sites were modulated to give a lower overpotential, confirming the intrinsically high OER and CER catalytic activity.

Reversibly Adapting Configuration in Atomic Catalysts Enables Efficient Oxygen Electroreduction

Single-atom catalysts (SACs) featuring M-N-C moieties have garnered significant attention as efficient electrocatalysts for the oxygen reduction reaction (ORR). However, the role of the dynamic M-N configuration of SACs induced by the derived frameworks under applied ORR potentials remains poorly understood. Herein, we conduct a comprehensive investigation using multiple operando techniques to assess the dynamic configurations of Cu SACs under various microstructural interface (MSI) regulations by anchoring atomic Cu on g-C3N4 and zeolitic imidazolate framework (ZIF) substrates. Cu SACs supported on g-C3N4 exhibit symmetric Cu-N configurations characterized by a reversibly adaptive nature under operational conditions, which leads to their excellent ORR catalytic activity. In contrast, the Cu-N configuration in ZIF-derived Cu SACs undergoes irreversible structural changes during the ORR process, in which the elongated Cu-N pair is unstable and breaks during the ORR, acting as a competing reaction against the ORR and resulting in high overpotential requirements. Crucially, operando time-resolved X-ray absorption spectroscopy (TR-XAS) and Raman results unequivocally reveal the reversibly adapting properties of the local Cu-N configuration in atomic Cu-anchored g-C3N4, which have been overlooked in numerous literatures. All findings provide valuable insights into the potential-driven characteristics of atomic electrocatalysts during target reactions and offer a systematic approach to study atomic electrocatalysts and their corresponding catalytic behaviors.

Lattice-Strain Engineering for Heterogenous Electrocatalytic Oxygen Evolution Reaction

The energy efficiency of metal-air batteries and water-splitting techniques is severely constrained by multiple electronic transfers in the heterogenous oxygen evolution reaction (OER), and the high overpotential induced by the sluggish kinetics has become an uppermost scientific challenge. Numerous attempts are devoted to enabling high activity, selectivity, and stability via tailoring the surface physicochemical properties of nanocatalysts. Lattice-strain engineering as a cutting-edge method for tuning the electronic and geometric configuration of metal sites plays a pivotal role in regulating the interaction of catalytic surfaces with adsorbate molecules. By defining the d-band center as a descriptor of the structure-activity relationship, the individual contribution of strain effects within state-of-the-art electrocatalysts can be systematically elucidated in the OER optimization mechanism. In this review, the fundamentals of the OER and the advancements of strain-catalysts are showcased and the innovative trigger strategies are enumerated, with particular emphasis on the feedback mechanism between the precise regulation of lattice-strain and optimal activity. Subsequently, the modulation of electrocatalysts with various attributes is categorized and the impediments encountered in the practicalization of strained effect are discussed, ending with an outlook on future research directions for this burgeoning field.

Boosting the inherent activity of NiFe layered double hydroxide via erbium incorporation for water oxidation

Enhancing the inherent activity of transition metal-based compounds involving Ni and Fe for the electrocatalytic oxygen evolution reaction (OER) is of vital importance, especially NiFe layered double hydroxide (LDH). Here, we doped erbium (Er) into NiFe LDH (Er-NiFe LDH) nanostructures using simple liquid-phase synthesis. The OER activity tests at the same mass loading demonstrated that Er-NiFe LDH has a smaller overpotential and lower Tafel slope than undoped NiFe LDH and commercial RuO2 powders, needing only a small overpotential of 243 mV to achieve a constant current at 10 mA cm-2. Additionally, Er-NiFe LDH was grown in situ on hydrophilic carbon paper substrates (Er-NiFe LDH@CP) to fabricate a three-dimensional (3D) electrode with large catalyst loading, which is favorable for analyzing the stability of morphology structure and elementary components after OER measurement. The galvanostatic measurement suggested that the Er-NiFe LDH@CP electrode possess higher electrochemical durability than a modified glassy carbon electrode due to the stronger mechanical binding between Er-NiFe LDH nanostructures and carbon paper substrate. More importantly, physical characterizations (e.g., SEM and XPS) revealed that Er-NiFe LDH has an excellent stability of morphology, and Ni, Fe, and Er still exist on the catalyst 24 h after the operation. This work provides an effective way for improving the inherent catalytic activity and stability of polymetallic OER catalysts in the future.

Recent advances in iridium-based catalysts with different dimensions for the acidic oxygen evolution reaction

Proton exchange membrane (PEM) water electrolysis is considered a promising technology for green hydrogen production, and iridium (Ir)-based catalysts are the best materials for anodic oxygen evolution reactions (OER) owing to their high stability and anti-corrosion ability in a strong acid electrolyte. The properties of Ir-based nanocatalysts can be tuned by rational dimension engineering, which has received intensive attention recently for catalysis ability boosting. To achieve a comprehensive understanding of the structural and catalysis performance, herein, an overview of the recent progress was provided for Ir-based catalysts with different dimensions for the acidic OER. The promotional effect was first presented in terms of the nano-size effect, synergistic effect, and electronic effect based on the dimensional effect, then the latest progress of Ir-based catalysts classified into zero-dimensional (0D), one-dimensional (1D), two-dimensional (2D) and three-dimensional (3D) catalysts was introduced in detail; and the practical application of some typical examples in the real PEM water electrolyzers (PEMWE) was also presented. Finally, the problems and challenges faced by current dimensionally engineered Ir-based catalysts in acidic electrolytes were discussed. It is concluded that the increased surface area and catalytic active sites can be realized by dimensional engineering strategies, while the controllable synthesis of different dimensional structured catalysts is still a great challenge, and the correlation between structure and performance, especially for the structural evolution during the electrochemical operation process, should be probed in depth. Hopefully, this effort could help understand the progress of dimensional engineering of Ir-based catalysts in OER catalysis and contribute to the design and preparation of novel efficient Ir-based catalysts.

Designing Oxide Catalysts for Oxygen Electrocatalysis: Insights from Mechanism to Application

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are fundamental processes in a range of energy conversion devices such as fuel cells and metal-air batteries. ORR and OER both have significant activation barriers, which severely limit the overall performance of energy conversion devices that utilize ORR/OER. Meanwhile, ORR is another very important electrochemical reaction involving oxygen that has been widely investigated. ORR occurs in aqueous solutions via two pathways: the direct 4-electron reduction or 2-electron reduction pathways from O2 to water (H2O) or from O2 to hydrogen peroxide (H2O2). Noble metal electrocatalysts are often used to catalyze OER and ORR, despite the fact that noble metal electrocatalysts have certain intrinsic limitations, such as low storage. Thus, it is urgent to develop more active and stable low-cost electrocatalysts, especially for severe environments (e.g., acidic media). Theoretically, an ideal oxygen electrocatalyst should provide adequate binding to oxygen species. Transition metals not belonging to the platinum group metal-based oxides are a low-cost substance that could give a d orbital for oxygen species binding. As a result, transition metal oxides are regarded as a substitute for typical precious metal oxygen electrocatalysts. However, the development of oxide catalysts for oxygen reduction and oxygen evolution reactions still faces significant challenges, e.g., catalytic activity, stability, cost, and reaction mechanism. We discuss the fundamental principles underlying the design of oxide catalysts, including the influence of crystal structure, and electronic structure on their performance. We also discuss the challenges associated with developing oxide catalysts and the potential strategies to overcome these challenges.

Phytochemical-assisted green synthesis of CuFeOx nano-rose electrocatalysts for oxygen evolution reaction in alkaline media

This study represents a green synthesis method for fabricating an oxygen evolution reaction (OER) electrode by depositing two-dimensional CuFeO_x on nickel foam (NF). Two-dimensional CuFeO_x was deposited on NF using in situ hydrothermal synthesis in the presence of Aloe vera extract. This phytochemical-assisted synthesis of CuFeO_x resulted in a unique nano-rose-like morphology (petal diameter 30-70 nm), which significantly improved the electrochemical surface area of the electrode. The synthesized electrode was analyzed for its OER electrocatalytic activity and it was observed that using 75% Aloe vera extract in the phytochemical-assisted synthesis of CuFeO_x resulted in improved OER electrocatalytic performance by attaining an overpotential of 310 mV for 50 mA cm^-2 and 410 mV for 100 mA cm^-2. The electrode also sustained robust stability throughout the 50 h of chronopotentiometry studies under alkaline electrolyte conditions, demonstrating its potential as an efficient OER electrode material. This study highlights the promising use of Aloe vera extract as a green and cost-effective way to synthesize efficient OER electrode materials.

Electrocatalysts for the Oxygen Evolution Reaction in Acidic Media

The well-established proton exchange membrane (PEM)-based water electrolysis, which operates under acidic conditions, possesses many advantages compared to alkaline water electrolysis, such as compact design, higher voltage efficiency, and higher gas purity. However, PEM-based water electrolysis is hampered by the low efficiency, instability, and high cost of anodic electrocatalysts for the oxygen evolution reaction (OER). In this review, the recently reported acidic OER electrocatalysts are comprehensively summarized, classified, and discussed. The related fundamental studies on OER mechanisms and the relationship between activity and stability are particularly highlighted in order to provide an atomistic-level understanding for OER catalysis. A stability test protocol is suggested to evaluate the intrinsic activity degradation. Some current challenges and unresolved questions, such as the usage of carbon-based materials and the differences between the electrocatalyst performances in acidic electrolytes and PEM-based electrolyzers are also discussed. Finally, suggestions for the most promising electrocatalysts and a perspective for future research are outlined. This review presents a fresh impetus and guideline to the rational design and synthesis of high-performance acidic OER electrocatalysts for PEM-based water electrolysis.

Rhenium Suppresses Iridium (IV) Oxide Crystallization and Enables Efficient, Stable Electrochemical Water Oxidation

IrO₂ as benchmark electrocatalyst for acidic oxygen evolution reaction (OER) suffers from its low activity and poor stability. Modulating the coordination environment of IrO₂ by chemical doping is a methodology to suppress Ir dissolution and tailor adsorption behavior of active oxygen intermediates on interfacial Ir sites. Herein, the Re-doped IrO₂ with low crystallinity is rationally designed as highly active and robust electrocatalysts for acidic OER. Theoretical calculations suggest that the similar ionic sizes of Ir and Re impart large spontaneous substitution energy and successfully incorporate Re into the IrO₂ lattice. Re-doped IrO₂ exhibits a much larger migration energy from IrO₂ surface (0.96 eV) than other dopants (Ni, Cu, and Zn), indicating strong confinement of Re within the IrO₂ lattice for suppressing Ir dissolution. The optimal catalysts (Re: 10 at%) exhibit a low overpotential of 255 mV at 10 mA cm^-2 and a high stability of 170 h for acidic OER. The comprehensive mechanism investigations demonstrate that the unique structural arrangement of the Ir active sites with Re-dopant imparts high performance of catalysts by minimizing Ir dissolution, facilitating *OH adsorption and *OOH deprotonation, and lowering kinetic barrier during OER. This study provides a methodology for designing highly-performed catalysts for energy conversion.

V-Integration Modulates t2g -Electrons of a Single Crystal Ir1- x (Ir0.8 V0.2 O2 )x -BHC for Boosted and Durable OER in Acidic Electrolyte

Realizing efficacious π-donation from the O 2p orbital to electron-deficient metal (t_2g ) d-orbitals along with separately tuned adsorption of *O and *OOH, is an imperious pre-requisite for an electrocatalyst design to demonstrate boosted oxygen evolution reaction (OER) performance. To regulate the π-donation and the adsorption ability for *O and *OOH, herein, a facile strategy to modulate the electron transfer from electron-rich t_2g -orbitals to electron-deficient t_2g -orbitals, via strong π-donation from the π-symmetry lone pairs of the bridging O^2- , and the d-band center of a biomimetic honeycomb (BHC)-like nanoarchitecture (Ir_{1- x} (Ir_0.8 V_0.2 O₂ )_x -BHC) is introduced. The suitable integration of V heteroatoms in the single crystal system of IrO₂ decreases the electron density on the neighboring Ir sites, and causes an upshift in the d-band center of Ir_{1- x} (Ir_0.8 V_0.2 O₂ )_x -BHC, weakening the adsorption of *O while strengthening that of *OOH, lowers the energy barrier for OER. Therefore, BHC design demonstrates excellent OER performance (shows a small overpotential of 238 mV at 10 mA cm^-2 and a Tafel slope of 39.87 mV dec^-1 ) with remarkable stability (130 h) in corrosive acidic electrolyte. This work opens a new corridor to design robust biomimetic nanoarchitectures of modulated π-symmetry (t_2g ) d-orbitals and the band structure, to achieve excellent activity and durability in acidic environment.

Fully Dispersed IrOx Atomic Clusters Enable Record Photoelectrochemical Water Oxidation of Hematite in Acidic Media

Ir-based materials are still the benchmark catalysts for various reactions in acidic environment, but the high loading and low atom utilization limit their large-scale deployment. Herein, we report an effective strategy for implanting fully dispersed iridium-oxide atomic clusters onto hematite for boosting photoelectrochemical water oxidation in acidic solution. The resulting photoanode achieves a record-high photocurrent of 1.35 mA cm^-2 at 1.23 V, corresponding to a mass activity of 172.70 A g^-1 (3 times higher than electrodeposited control sample) and demonstrating the merits from the high atomic utilization of Ir. The systematically experimental and theoretical results reveal that the performance improvement correlates with the modulated electronic structure including the adjusted Fermi level and d-band center, which significantly enhances charge separation efficiency and promotes the conversion from intermediate *O into *OOH.

Machine-Learning-Assisted Discovery of High-Efficient Oxygen Evolution Electrocatalysts

Iridium oxide (IrO₂) is the predominant electrocatalyst for the oxygen evolution reaction (OER), but its low efficiency and high cost limit its applications. In this work, we have developed a strategy by combination of high-throughput density functional theory (DFT) and machine learning (ML) techniques for material discovery on IrO₂-based electrocatalysts with enhanced OER activity. A total of 36 kinds of metal dopants are considered to substitute for Ir to form binary and ternary metal oxides, and the most stable surface structures are selected from a total of 4648 structures for OER activity evaluation. Utilizing the neural network language model (NNLM), we associate the atomic environment with the formation energies of crystals and free energies of OER intermediates, and finally a series of potential candidates have been screened as the superior OER catalysts. Our strategy could efficiently explore promising electrocatalysts, especially for evaluating complex multi-metallic compounds.

A comparative study of interfacial thermal conductance between metal and semiconductor

To understand and control thermal conductance of interface between metal and semiconductor has now become a crucial task for the thermal design and management of nano-electronic and micro-electronic devices. The interfacial alignments and electronic characteristics of the interfaces between metal and semiconductor are studied using a first-principles calculation based on hybrid density functional theory. The thermal conductance of interfaces between metal and semiconductor were calculated and analyzed using diffuse mismatch model, acoustic mismatch model and nonequilibrium molecular dynamics methods. Especially, according to nonequilibrium molecular dynamics, the values of thermal conductance were obtained to be 32.55 MW m−2 K−1 and 341.87 MW m−2 K−1 at C–Cu and Si–Cu interfaces, respectively. These results of theoretical simulation calculations are basically consistent with the current experimental data, which indicates that phonon–phonon interaction play a more important role than electron–phonon interaction during heat transport. It may be effective way to improve the interfacial thermal conductance through enhancing the interface coupling strength at the metal–semiconductor interface because the strong interfacial scattering plays a role in suppressing in the weaker interface coupling heterostructure, leading to the lower thermal conductance of interfaces. This could provide a beneficial reference for the design of the Schottky diode and thermal management at the interfaces between metal and semiconductor.

In Situ Anodic Oxidation Tuning of NiFeV Diselenide to the Core-Shell Heterojunction for Boosting Oxygen Evolution

Developing non-noble metal-based core-shell heterojunction electrocatalysts with high catalytic activity and long-lasting stability is crucial for the oxygen evolution reaction (OER). Here, we prepared novel core-shell Fe,V-NiSe₂@NiFe(OH)_x heterostructured nanoparticles on hydrophilic-treated carbon paper with high electronic transport and large surface area for accelerating the oxygen evolution rate via high-temperature selenization and electrochemical anodic oxidation procedures. Performance testing shows that Fe,V-NiSe₂@NiFe(OH)_x possesses the highest performance for OER compared to as-prepared diselenide core-derived heterojunctions, which only require an overpotential of 243 mV at 10 mA cm^-2 and a low Tafel slope of 91.6 mV decade^-1 under basic conditions. Furthermore, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) confirm the morphology and elementary stabilities of Fe,V-NiSe₂@NiFe(OH)_x after long-term chronopotentiometric testing. These advantages are largely because of the strong synergistic effect between the Fe,V-NiSe₂ core with high conductivity and the amorphous NiFe(OH)_x shell with enriched defects and vacancies. This study also presents a general approach to designing and synthesizing more active core-shell heterojunction electrocatalysts for OER.

Activated chemical bonds in nanoporous and amorphous iridium oxides favor low overpotential for oxygen evolution reaction

To date, the search for active, selective, and stable electrocatalysts for the oxygen evolution reaction (OER) has not ceased and a detailed atomic-level design of the OER catalyst remains an outstanding (if not, compelling) problem. Considerable studies on different surfaces and polymorphs of iridium oxides (with varying stoichiometries and dopants) have emerged over the years, showing much higher OER activity than the conventionally reported rutile-type IrO₂. Here, we have considered different metastable nanoporous and amorphous iridium oxides of different chemical stoichiometries. Using first-principles electronic structure calculations, we investigate the (electro)chemical stability, intercalation properties, and electronic structure of these iridium oxides. Using an empirical regression model between the Ir-O bond characteristics and the measured OER overpotentials, we demonstrate how activated Ir-O bonds (and the presence of more electrophilic oxygens) in these less understood polymorphs of iridium oxides can explain their superior OER performance observed in experiments.

Here the authors use density-functional theory calculations to examine structure-property relations of nanoporous and amorphous iridium oxides and reconcile the superior oxygen evolution reaction catalytic performance reported in previous experiments.

Strong Oxide-Support Interaction over IrO2 /V2 O5 for Efficient pH-Universal Water Splitting

Constructing strong oxide-support interaction (SOSI) is compelling for modulating the atomic configurations and electronic structures of supported catalysts. Herein, ultrafine iridium oxide nanoclusters (≈1 nm) are anchored on vanadium oxide support (IrO2 /V2 O5 ) via SOSI. The as made catalyst, with a unique distorted IrO2 structure, is discovered to significantly boost the performance for pH-universal oxygen evolution reaction (OER). Based on experimental results and theoretical calculations, the distorted IrO2 active sites with flexible redox states in IrO2 /V2 O5 server as electrophilic centers balance the adsorption of oxo-intermediates and effectively facilitate the process of OO coupling, eventually propelling the fast turnover of water oxidation. As a result, IrO2 /V2 O5 demonstrates not only ultralow overpotentials at 10 mA cm-2 (266 mV, pH = 0; 329 mV, pH = 7; 283 mV, pH = 14) for OER, but also high-performance overall water electrolysis over a broad pH range, with a potential of mere 1.50 V (pH = 0), 1.65 V (pH = 7) or 1.49 V (pH = 14) at 10 mA cm-2 . In addition, SOSI can simultaneously secure the distorted active sites and thus remarkably improving the catalytic stability, making it a promising strategy to develop high-performance catalytic systems.

An electrochemical modification strategy to fabricate NiFeCuPt polymetallic carbon matrices on nickel foam as stable electrocatalysts for water splitting

Electrochemical modification is a mild and economical way to prepare electrocatalytic materials with abundant active sites and high atom efficiency. In this work, a stable NiFeCuPt carbon matrix deposited on nickel foam (NFFeCuPt) was fabricated with an extremely low Pt load (∼28 μg cm⁻²) using one-step electrochemical co-deposition modification, and it serves as a bifunctional catalyst for overall water splitting and achieves 100 mA cm⁻² current density at a low cell voltage of 1.54 V in acidic solution and 1.63 V in alkaline solution, respectively. In addition, a novel electrolyte was developed to stabilize the catalyst under acidic conditions, which provides inspiration for the development of highly efficient, highly stable, and cost-effective ways to synthesize electrocatalysts.

Multiple metal elements immobilized into a carbon matrix to fabricate an ultra-stable water splitting electrocatalyst by one-step electrochemical modification.

Recent Progress in Advanced Electrocatalyst Design for Acidic Oxygen Evolution Reaction

Proton exchange membrane (PEM) water electrolyzers hold great significance for renewable energy storage and conversion. The acidic oxygen evolution reaction (OER) is one of the main roadblocks that hinder the practical application of PEM water electrolyzers. Highly active, cost-effective, and durable electrocatalysts are indispensable for lowering the high kinetic barrier of OER to achieve boosted reaction kinetics. To date, a wide spectrum of advanced electrocatalysts has been designed and synthesized for enhanced acidic OER performance, though Ir and Ru based nanostructures still represent the state-of-the-art catalysts. In this Progress Report, recent research progress in advanced electrocatalysts for improved acidic OER performance is summarized. First, fundamental understanding about acidic OER including reaction mechanisms and atomic understanding to acidic OER for rational design of efficient electrocatalysts are discussed. Thereafter, an overview of the progress in the design and synthesis of advanced acidic OER electrocatalysts is provided in terms of catalyst category, i.e., metallic nanostructures (Ir and Ru based), precious metal oxides, nonprecious metal oxides, and carbon based nanomaterials. Finally, perspectives to the future development of acidic OER are provided from the aspects of reaction mechanism investigation and more efficient electrocatalyst design.

Dynamic Restructuring of Coordinatively Unsaturated Copper Paddle Wheel Clusters to Boost Electrochemical CO2 Reduction to Hydrocarbons*

The electrochemical reduction of CO₂ to hydrocarbons involves a multistep proton-coupled electron transfer (PCET) reaction. Second coordination sphere engineering is reported to be effective in the PCET process; however, little is known about the actual catalytic active sites under realistic operating conditions. We have designed a defect-containing metal-organic framework, HKUST-1, through a facile "atomized trimesic acid" strategy, in which Cu atoms are modified by unsaturated carboxylate ligands, producing coordinatively unsaturated Cu paddle wheel (CU-CPW) clusters. We investigate the dynamic behavior of the CU-CPW during electrochemical reconstruction through the comprehensive analysis of in situ characterization results. It is demonstrated that Cu₂ (HCOO)₃ is maintained after electrochemical reconstruction and that is behaves as an active site. Mechanistic studies reveal that CU-CPW accelerates the proton-coupled multi-electron transfer (PCMET) reaction, resulting in a deep CO₂ reduction reaction.

Sacrificial Cu Layer Mediated the Formation of an Active and Stable Supported Iridium Oxygen Evolution Reaction Electrocatalyst

The production of hydrogen via a proton-exchange membrane water electrolyzer (PEM-WE) is directly dependent on the rational design of electrocatalysts for the anodic oxygen evolution reaction (OER), which is the bottleneck of the process. Here, we present a smart design strategy for enhancing Ir utilization and stabilization. We showcase it on a catalyst, where Ir nanoparticles are efficiently anchored on a conductive support titanium oxynitride (TiON_x) dispersed over carbon-based Ketjen Black and covered by a thin layer of copper (Ir/CuTiON_x/C), which gets removed in the preconditioning step. Electrochemical OER activity, stability, and structural changes were compared to the Ir-based catalyst, where Ir nanoparticles without Cu are deposited on the same support (Ir/TiON_x/C). To study the effect of the sacrificial less-noble metal layer on the catalytic performance of the synthesized material, characterization methods, namely X-ray powder diffraction, X-ray photoemission spectroscopy, and identical location transmission electron microscopy were employed and complemented with scanning flow cell coupled to an inductively coupled plasma mass spectrometer, which allowed studying the online dissolution during the catalytic reaction. Utilization of these advanced methods revealed that the sacrificial Cu layer positively affects both Ir OER mass activity and its durability, which was assessed via S-number, a recently reported stability metric. Improved activity of Cu analogue was ascribed to the higher surface area of smaller Ir nanoparticles, which are better stabilized through a strong metal–support interaction (SMSI) effect.

Advanced Transition Metal-Based OER Electrocatalysts: Current Status, Opportunities, and Challenges

Oxygen evolution reaction (OER) is an important half-reaction involved in many electrochemical applications, such as water splitting and rechargeable metal-air batteries. However, the sluggish kinetics of its four-electron transfer process becomes a bottleneck to the performance enhancement. Thus, rational design of electrocatalysts for OER based on thorough understanding of mechanisms and structure-activity relationship is of vital significance. This review begins with the introduction of OER mechanisms which include conventional adsorbate evolution mechanism and lattice-oxygen-mediated mechanism. The reaction pathways and related intermediates are discussed in detail, and several descriptors which greatly assist in catalyst screen and optimization are summarized. Some important parameters suggested as measurement criteria for OER are also mentioned and discussed. Then, recent developments and breakthroughs in experimental achievements on transition metal-based OER electrocatalysts are reviewed to reveal the novel design principles. Finally, some perspectives and future directions are proposed for further catalytic performance enhancement and deeper understanding of catalyst design. It is believed that iterative improvements based on the understanding of mechanisms and fundamental design principles are essential to realize the applications of efficient transition metal-based OER electrocatalysts for electrochemical energy storage and conversion technologies.

Ultrafast heating to boost the electrocatalytic activity of iridium towards oxygen evolution reaction

Efficient electrocatalysts are in great demand for renewable energy storage systems. Herein, we propose an ultrafast heating strategy to fabricate an efficient Ir/CP-UH catalyst for the oxygen evolution reaction (OER). Experimental results demonstrated that the ultrasmall Ir nanoparticles (≈1-3 nm) and clusters (<1 nm) were highly dispersed on the carbon paper support after a short thermal shock (∼5 s). The catalyst showed a low overpotential of 260 mV at 10 mA cm-2 and remarkable mass activity of about 13.8 times higher than that of the current state-of-the-art commercial Ir/C catalyst. This ultrafast heating strategy can also be applied to other catalyst systems for OER and other electrochemical reactions.

Surface Reconstruction for Forming the [IrO6]-[IrO6] Framework: Key Structure for Stable and Activated OER Performance in Acidic Media

The surface reconstruction of iridium-based derivatives (A_xIr_yO_z) was extensively demonstrated to have an excellent oxygen evolution reaction (OER) performance in an acidic medium. It is urgent to use various spectroscopy and computational methods to explore the electronic state changes in the surface reconstruction process. Herein, the underestimated Lu₂Ir₂O₇ was synthesized and investigated. Four typical forms of electrochemistry impedance spectra involved in the reconstruction process revealed three dominating forms of reconstructed pyrochlore in the OER stage, including the inner intact pyrochlore, mid metastable [IrO₆]-[IrO₆] framework, and the outer collapse amorphous layer. The enhancing electron transport efficiency of the corner-shared [IrO₆]-[IrO₆] framework was revealed as a critical role in acidic systems. The density of state (DOS) for the constructed [IrO₆]-[IrO₆] framework corroborated the enhancement of Ir-O hybridization and the downshift of the d-band center. Additionally, we contrast the pristine and reconstruction properties of the Pr₂Ir₂O₇, Eu₂Ir₂O₇, and Lu₂Ir₂O₇ in alkaline and acidic media. The DOS and the XANES results reveal the scale relationship between the O 2p band center and the intrinsic activity for bulk pyrochlore in alkaline media. The highest O 2p center and the highest Ir-O hybridization of Lu₂Ir₂O₇ exhibited the best OER performance among the Ir-based pyrochlore, up to a ninefold improvement in Ir-mass activity compared to IrO₂. Our findings emphasize the electrochemical behavior of the reconstruction process for activated water-splitting performance.

Hydrous cobalt-iridium oxide two-dimensional nanoframes: insights into activity and stability of bimetallic acidic oxygen evolution electrocatalysts

Acidic oxygen evolution reaction (OER) electrocatalysts that have high activity, extended durability, and lower costs are needed to further the development and wide-scale adoption of proton-exchange membrane electrolyzers. In this work, we report hydrous cobalt-iridium oxide two-dimensional (2D) nanoframes exhibit higher oxygen evolution activity and similar stability compared with commercial IrO₂; however, the bimetallic Co-Ir catalyst undergoes a significantly different degradation process compared with the monometallic IrO₂ catalyst. The bimetallic Co-Ir 2D nanoframes consist of interconnected Co-Ir alloy domains within an unsupported, carbon-free, porous nanostructure that allows three-dimensional molecular access to the catalytically active surface sites. After electrochemical conditioning within the OER potential range, the predominately bimetallic alloy surface transforms to an oxide/hydroxide surface. Oxygen evolution activities determined using a rotating disk electrode configuration show that the hydrous Co-Ir oxide nanoframes provide 17 times higher OER mass activity and 18 times higher specific activity compared to commercial IrO₂. The higher OER activities of the hydrous Co-Ir nanoframes are attributed to the presence of highly active surface iridium hydroxide groups. The accelerated durability testing of IrO₂ resulted in lowering of the specific activity and partial dissolution of Ir. In contrast, the durability testing of hydrous Co-Ir oxide nanoframes resulted in the combination of a higher Ir dissolution rate, an increase in the relative contribution of surface iridium hydroxide groups and an increase in specific activity. The understanding of the differences in degradation processes between bimetallic and monometallic catalysts furthers our ability to design high activity and stability acidic OER electrocatalysts.

Synthesis of Lattice-Contracted Cobalt Disulfide as an Outstanding Oxygen Reduction Reaction Catalyst via Self-assembly Arrangement

Identifying high-performance non-precious metal-based catalysts at the cathode is a major challenge for future practical applications. Herein, a soft-template route through a self-assembly arrangement of sulfur sources was successfully developed, facilitating the anion exchange. In addition, compared with pristine cobalt disulfide synthesized without templates, the cobalt disulfide prepared using the new method presented a lattice shrinking phenomenon due to the hindrance of cobalt hydroxide crystal cell. Based on X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculation, increased occupancy of e_g orbitals was verified for the cobalt disulfide after shrinkage, which was the main factor for enhancing the intrinsic activity of the catalyst. Besides the microscopic morphologic structure, elementary composition, and the valence state of the elements, the possible growth process of the cobalt disulfide was also discussed in detail. As catalyst for the oxygen reduction reaction, CoS₂ showed a similar half-wave potential (0.81 vs. 0.84 V for Pt/C) and higher diffusion-limiting current density (reaching 5.33 vs. 5.19 mA cm^-2 for Pt/C) than a commercial Pt/C catalyst. Hence, our results provide a rational design direction for this type of catalysts.

Tuning the Electronic Structures of Multimetal Oxide Nanoplates to Realize Favorable Adsorption Energies of Oxygenated Intermediates

Highly active oxygen evolution reaction (OER) electrocatalysts are important to effectively transform renewable electricity to fuel and chemicals. In this work, we construct a series of multimetal oxide nanoplate OER electrocatalysts through successive cation exchange followed by electrochemical oxidation, whose electronic structure and diversified metal active sites can be engineered via the mutual synergy among multiple metal species. Among the examined multimetal oxide nanoplates, CoCeNiFeZnCuO_x nanoplates exhibit the optimal adsorption energy of OER intermediates. Together with the high electrochemical active surface area, the CoCeNiFeZnCuO_x nanoplates manage to deliver a small overpotential of 211 mV at an OER current density of 10 mA cm^-2 (η₁₀) with a Tafel slope as low as 21 mV dec^-1 in 1 M KOH solution, superior to commercial IrO₂ (339 mV at η₁₀, Tafel slope of 55 mV dec^-1), which can be stably operated at 10 mA cm^-2 (at an overpotential of 211 mV) and 100 mA cm^-2 (at an overpotential of 307 mV) for 100 h.

Regulating the Coordination of Co sites in Co3 O4 /MnO2 Compounding for Facilitated Oxygen Reduction Reaction

Binary transition metal oxides as a promising oxygen reduction reaction (ORR) catalyst have received significant attention. However, their exact reaction mechanisms are often too complex to be discussed. Herein, novel Co-Mn composites with a well-defined nanostructure were developed for understanding the role of each component. The growth pattern of cobalt oxide and the effects of the coordination environment of Co sites during growth on the overall activity were investigated. Based on experimental and density functional theory studies, it was found that the decaying coordination number directly affected the expression of crystal planes of cobalt oxide, which further had a great influence upon limiting current density of Co-Mn catalysts. The cuboid-Co/Mn catalyst exhibited outstanding limiting current density and showed good stability, related to more highly active (110) planes exposed in Co₃ O₄ . These provided many references for the preparation of related nonprecious catalysts in various domains.

Ce-Doped IrO2 Electrocatalysts with Enhanced Performance for Water Oxidation in Acidic Media

Electrocatalytic water splitting in acidic media based on a proton-exchange membrane (PEM) is a promising technique for the large-scale production of hydrogen. However, developing electrocatalysts with high activity and excellent stability for an oxygen evolution reaction (OER) in acidic media is still a big challenge. Herein, a Ce_x-IrO₂ catalyst supported on N-doped porous carbon (NPC) was developed via doping Ce into IrO₂ nanoparticles. The Ce_x-IrO₂ nanoparticles were uniformly distributed on NPC due to the high surface area. The optimized Ce_0.2-IrO₂@NPC delivers a low overpotential of 224 mV and excellent stability of 100 h in 0.5 M H₂SO₄ at 10 mA cm^-2. Density functional theory (DFT) calculations indicated that the introduction of Ce could modify the electronic structure of IrO₂, decreasing the energy barrier of the rate-determining step for OER and enhancing the electrochemical OER performance. Our work opens up a new way of developing anodic electrocatalysts, which can be stably applied in acidic media.

Hierarchical Highly Wrinkled Trimetallic NiFeCu Phosphide Nanosheets on Nanodendrite Ni3S2/Ni Foam as an Efficient Electrocatalyst for the Oxygen Evolution Reaction

The sluggish oxygen evolution reaction (OER) and costly noble-metal oxide catalysts hinder the vast usage of environmentally friendly water splitting for hydrogen production. Elemental doping by partial replacing of parent metal elements with elements of higher electronegativity is considered to be one of the most efficient strategies to promote the electrocatalytic OER performance. In this work, we synthesize an efficient hierarchical highly wrinkled NiFeCu phosphide nanosheet on nanodendrite Ni₃S₂/NiF substrates through partial replacement of Cu instead of Ni and Fe in NiFeP@Ni₃S₂/NiF by using a facile electrodeposition method. The NiFeCuP@Ni₃S₂/NiF electrocatalyst needs only 230, 282, and 351 mV to reach 10, 50, and 100 mA × cm^-2, respectively. Notably, this electrocatalyst shows one of the lowest OER overpotentials at 10 mA/cm^-2 for metal phosphides and endured the OER at 20 mA × cm^-2 for 18 h with negligible voltage elevation. The X-ray photoelectron spectroscopy (XPS), double-layer capacitance (C_dl) plots, and electrochemical impedance spectroscopy show that the partial Cu doping in NiFeP@Ni₃S₂/NiF not only can change the electron density around Ni and Fe but also can increase the electrochemically active surface area and conductivity of electrocatalysts.

Lanthanides Regulated the Amorphization-Crystallization of IrO2 for Outstanding OER Performance

Research has been focused on regulating the amorphous surface of Ir-based materials to achieve a higher oxygen evolution reaction (OER) activity. The IrO_x amorphous layer is generally considered to be substantial enough to break the limitation created by the conventional adsorbate evolution mechanism (AEM) in acidic media. In this work, we used lanthanides to regulate IrO_x amorphization-crystallization through inhibiting the crystallization of iridium atoms in the calcination process. The chosen route created abundant crystalline-amorphous (c-a) interfaces, which greatly enhanced the charge transfer kinetics and the stability of the materials. The mass activity of iridium in the synthesized IrO₂@LuIr_1-nO_x(OH)_y structure reached 128.3 A/g_Ir, which is 14.6-fold that of the benchmark IrO₂. All the IrO₂@LnIr_1-nO_x(OH)_y (Ln = La-Lu) structures reflected 290-300 mV of overpotential at 10 mA/cm_geo². We demonstrate that a highly active c-a interface possesses an efficient charge transfer capability and is conducive to the stability of the activated oxygen species. The surface-activated oxygen species and the tensile strain [IrO₆] octahedron regulated by lanthanides are synergistically beneficial for increasing the intrinsic OER activity. Our research findings introduce c-a interface generation by the regulation of lanthanides as a new method for the rational design of robust OER catalysts.

Trifunctional Single-Atomic Ru Sites Enable Efficient Overall Water Splitting and Oxygen Reduction in Acidic Media

Development of cost-effective, active trifunctional catalysts for acidic oxygen reduction (ORR) as well as hydrogen and oxygen evolution reactions (HER and OER, respectively) is highly desirable, albeit challenging. Herein, single-atomic Ru sites anchored onto Ti₃ C₂ T_x MXene nanosheets are first reported to serve as trifunctional electrocatalysts for simultaneously catalyzing acidic HER, OER, and ORR. A half-wave potential of 0.80 V for ORR and small overpotentials of 290 and 70 mV for OER and HER, respectively, at 10 mA cm^-2 are achieved. Hence, a low cell voltage of 1.56 V is required for the acidic overall water splitting. The maximum power density of an H₂ -O₂ fuel cell using the as-prepared catalyst can reach as high as 941 mW cm^-2 . Theoretical calculations reveal that isolated Ru-O₂ sites can effectively optimize the adsorption of reactants/intermediates and lower the energy barriers for the potential-determining steps, thereby accelerating the HER, ORR, and OER kinetics.