A smart "off-on" gate for the in situ detection of hydrogen sulphide with Cu(ii)-assisted europium emission

Small Molecule Optical Probes for Detection of H2S in Water Samples: A Review

Hydrogen sulfide (H2S) is closely linked to not only environmental hazards, but also it affects human health due to its toxic nature and the exposure risks associated with several occupational settings. Therefore, detection of this pollutant in water sources has garnered immense importance in the analytical research arena. Several research groups have devoted great efforts to explore the selective as well as sensitive methods to detect H2S concentrations in water. Recent studies describe different strategies for sensing this ubiquitous gas in real-life water samples. Though many of the designed and developed H2S detection approaches based on the use of organic small molecules facilitate qualitative/quantitative detection of the toxic contaminant in water, optical detection has been acknowledged as one of the best, attributed to the simple, highly sensitive, selective, and good repeatability features of the technique. Therefore, this review is an attempt to offer a general perspective of easy-to-use and fast response optical detection techniques for H2S, fluorimetry and colorimetry, over a wide variety of other instrumental platforms. The review affords a concise summary of the various design strategies adopted by various researchers in constructing small organic molecules as H2S sensors and offers insight into their mechanistic pathways. Moreover, it collates the salient aspects of optical detection techniques and highlights the future scope for prospective exploration in this field based on the limitations of the existing H2S probes.

A highly selective and sensitive fluorescence probe based on BODIPY-cyclen for hydrogen sulfide detection in living cells and serum

Hydrogen sulfide (H2S) is a multifunctional gaseous signaling molecule that plays a vital role in several biological processes. In the present study, a BODIPY-based fluorescent probe called 8-[4-((1,4,7,10-tetraazacyclododecane)methyl)phenyl]-4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a, 4a-diaza-s-indacene (BA-Cyclen)-Cu was designed and synthesized; this probe is a Cu(Ⅱ) complex that uses Cu(Ⅱ) decomplexation to achieve the sensitive and rapid detection of aqueous H2S via the "turn-on" mode. We observed that BA-Cyclen-Cu exhibited good membrane permeability, low toxicity, and lysosome-targeting ability, facilitating H2S detection in living cells. Furthermore, we demonstrated the potential biological applications of the probe by measuring exogenous H2S originating from Na2S and GYY4137, a slow-release donor, and endogenous H2S generated via the catalysis of cystathionine-β-synthase in both normal (H9c2) and cancerous (U87) cells. Moreover, BA-Cyclen-Cu was successfully used to detect exogenous H2S by the external standard method in fetal bovine serum, the serum of a healthy person, and the serum of a patient with liver cancer.

Detection of aqueous and gaseous hydrogen sulfide with lanthanide-macrocycle binary complexes

Two novel, discrete lanthanide-macrocycle binary complexes for the detection of hydrogen sulfide are reported. The hydrogen sulfide sensing mechanism utilises the copper sequestration at a secondary binding site, with resulting bimetallic lanthanide(III)/copper(II) complexes (Ln = Eu3+ and Tb3+) exhibiting high selectivity, good sensitivity and excellent reversibility for aqueous hydrogen sulfide. The inclusion of the DO2A macrocycle and 4-(2-pyridyl)-1,2,3-triazole dipicolinic acid ligand, results in a complex with good solubility and stability. The europium(III) complex also displayed a low limit of detection (665 ppb) with a response time of 30 seconds with gaseous hydrogen sulfide. The improved water solubility and stability over a previous complex results in these sensors having the potential for use in environmental monitoring and biological studies for various functional settings.

Lanthanide ternary complex as a fluorescent probe for highly sensitive and selective detection of copper ions based on selective recognition and photoinduced electron transfer

Copper ions have a very important role in human health, industrial and agricultural production. Herein, lanthanide ternary complex of 2,6-pyridinedicarboxylic acid (DPA)-Eu³⁺-polyethyleneimine (PEI) as a fluorescent probe was thus fabricated for highly sensitive and selective detection of copper ions. PEI itself is non-fluorescent, the PEI-Eu³⁺complex is also non-fluorescent, and PEI has specific recognition to copper ions due to its higher affinity ability to copper ion than other metal ions. It was found that Cu²⁺ ions cannot quench the characteristic fluorescence of Eu³⁺ in the DPA-Eu³⁺ system, while in the DPA-Eu³⁺-PEI system, Cu²⁺ ions can greatly quench the characteristic fluorescence of Eu³⁺ due to photoinduced electron transfer (PET). The luminescent and quenching mechanism was also discussed in detail. The DPA-Eu³⁺-PEI probe not only has high sensitivity and selectivity, but also has very rapid fluorescence response and the response time is only 1 min. A good linear relationship between the fluorescence ratios of F₀/F and the concentrations of Cu²⁺ was obtained in the range of 0.02 ∼ 10.0 μM (R² = 0.998), and the limit of detection (LOD) is 8.0 nM. The probe was successfully applied for the detection of Cu²⁺ ions in the lake and river water samples, wastewater and urine samples. This work may provide a new strategy for fabricating simple and effective fluorescence probe and a promising application for the rapid and on-site detection in environmental monitoring and biological fluids.

A highly selective colorimetric and fluorescent probe Eu(tdl)2abp for H2S sensing: Application in live cell imaging and natural water

Using 4-([2,2': 6', 2'- terpyridin] -4'-yl) -N, N-dimethylaniline (tdl) as auxiliary ligand and 6-azido-2,2'-bipyridine (abp) as recognition ligand, a europium complex fluorescent probe Eu(4-([2,2': 6', 2'-terpyridin] -4' -yl) -N, N-dimethylaniline)₂-6-azido-2,2'-bipyridine Eu(tdl)₂abp for efficient and specific recognition of hydrogen sulfide (H₂S) was successfully synthesized and characterized by NMR and MS. Eu(tdl)₂abp represented "on-off" fluorescence signals for H₂S and its color changes could be identified with naked eyes. Eu(tdl)₂abp had short response time (2 min) to H₂S, high selectivity and good anti-interference, large stokes shift (207 nm). In various samples, when H₂S existed, the azide group was reduced to amine group, resulting in closed fluorescence signal, and the fluorescence intensity reached the degree of quenching without being affected by other interference. At the same time, there was a good linear relationship between relative fluorescence intensity and H₂S concentration with the detection limit (LOD) of 0.64 μM. The sensing mechanism of Eu(tdl)₂abp to detect H₂S was characterized by ¹H NMR and HR-MS. Eu(tdl)₂abp was used with success for the sensitive detection of H₂S in natural water and living cells.

A red-emitting Europium(III) complex as a luminescent probe with large Stokes shift for the sequential determination of Cu2+ and biothiols in real samples

In this work, a novel Eu³⁺-DTPA-bis(AMC) complex with red luminescence was designed and synthesized for sequential detection of Cu²⁺ and biothiols (Cys/Hcy/GSH) based on the displacement strategy with the good selectivity, high sensitivity, and large Stokes shift (288 nm). The possible detection mechanism was verified by UV-vis, the high-resolution mass spectrometry, and the fluorescence decay curve. The experimental parameters, including the solution pH, the incubation time, the concentration ratio of Eu³⁺-DTPA-bis(AMC) to Cu²⁺ and biothiols concentration, were optimized. Under the optimal conditions, it shows a good linear relationship between the concentration (0-10 μM) of Cu²⁺ and the fluorescence intensity of Eu³⁺-DTPA-bis(AMC), with a low detection limit of 0.065 μM. The linear range and the limit of detection of the Eu³⁺-DTPA-bis(AMC)/Cu²⁺ system for Cys/Hcy/GSH were 2.5-22.5/5-45/5-50 μM and 0.11/0.07/0.05 μM, respectively. Surprisingly, the high or low concentration of Eu³⁺-DTPA-bis(AMC)/Cu²⁺ can significantly affect the selectivity of the sensing system to biothiols (Cys/GSH/Hcy). When the concentration of the Eu³⁺-DTPA-bis(AMC)/Cu²⁺ system is 10.0 μΜ, it could recognize biothiols (Cys/GSH/Hcy) from other substances, but when the concentration is as low as 3.3 μM, it could further specifically distinguished Cys from Hcy/GSH. Owing to the high anti-interference characteristics, accuracy and specificity, the sensing system was well applied to the cascade detection of Cu²⁺ in actual environmental samples and Cys in biological and food samples, including FBS, urine, milk, beverage, fresh juice with the satisfactory recoveries from 96.20 to 106.80 %.

Photo-thermo-induced room-temperature phosphorescence through solid-state molecular motion

The development of smart-responsive materials, in particular those with non-invasive, rapid responsive phosphorescence, is highly desirable but has rarely been described. Herein, we designed and prepared a series of molecular rotors containing a triazine core and three bromobiphenyl units: o-Br-TRZ, m-Br-TRZ, and p-Br-TRZ. The bromine and triazine moieties serve as room temperature phosphorescence-active units, and the bromobiphenyl units serve as rotors to drive intramolecular rotation. When irradiated with strong ultraviolet photoirradiation, intramolecular rotations of o-Br-TRZ, m-Br-TRZ, and p-Br-TRZ increase, successively resulting in a photothermal effect via molecular motions. Impressively, the photothermal temperature attained by p-Br-TRZ is as high as 102 °C, and synchronously triggers its phosphorescence due to the ordered molecular arrangement after molecular motion. The thermal effect is expected to be important for triggering efficient phosphorescence, and the photon input for providing a precise and non-invasive stimulus. Such sequential photo-thermo-phosphorescence conversion is anticipated to unlock a new stimulus-responsive phosphorescence material without chemicals invasion.

The development of non-invasive, rapid responsive phosphorescence is highly desirable but has rarely been described. Herein, the authors designed and prepare a series of molecular rotors containing a room temperature phosphorescence active triazine core and three bromobiphenyl units acting as rotors and demonstrate light stimulus triggered phosphorescence.

Coordination-Assembly of Lanthanide Supramolecular Hydrogels with Luminescent Multi-stimulus Response

Luminescent supramolecular hydrogels have shown extensive potential for a variety of applications due to their unique optical properties and biocompatibility. Coordination self-assembly provides a promising strategy for the preparation of supramolecular hydrogels. In this contribution, a series of luminescent lanthanide (Ln) supramolecular hydrogels HG-Ln_2nL_3n^1/2 are synthesized by coordination self-assembly of Ln ions and V shaped bis-tetradentate ligands (H₄L¹ and H₄L²) with different bent angles (∠B). Two rigid conjugated ligands H₄L¹ and H₄L² with bent angles (∠B ≈ 150°) featuring a 2,6-pyridine bitetrazolate chelating moiety were designed and synthesized, which generated hydrogels via the deprotonation self-assembly with lanthanide ions. Characteristic Eu³⁺ and Yb³⁺ emissions were realized in the corresponding hydrogels, with intriguing multi-stimulus response behaviors. The luminescence of the HG-Eu_2nL_3n¹ hydrogel can be enhanced or quenched when stimulated by diverse metal ions, attributed to the replacement of the coordinated lanthanide ions and changes in the intersystem crossing efficiency of the ligand. Furthermore, pH-responsive emission of the HG-Eu_2nL_3n¹ hydrogel has also been observed. Our work provides potential strategies for the design of next-generation smart responsive hydrogel materials with variable structures.

Luminescent lanthanide(III) complexes of DTPA-bis(amido-phenyl-terpyridine) for bioimaging and phototherapeutic applications

We report here a series of coordinatively-saturated and thermodynamically stable luminescent [Ln(dtntp)(H₂O)] [Ln(III) = Eu (1), Tb (2), Gd (3), Sm (4) and Dy (5)] complexes using an aminophenyl-terpyridine appended-DTPA (dtntp) chelating ligand as cell imaging and photocytotoxic agents. The N,N″-bisamide derivative of H₅DTPA named as dtntp is based on 4'-(4-aminophenyl)-2,2':6',2″-terpyridine conjugated to diethylenetriamine-N,N',N″-pentaacetic acid. The structure, physicochemical properties, detailed photophysical aspects, interaction with DNA and serum proteins, and photocytotoxicity were studied. The intrinsic luminescence of Eu(III) and Tb(III) complexes due to f → f transitions used to evaluate their cellular uptake and distribution in cancer cells. The solid-state structure of [Eu(dtntp)(DMF)] (1·DMF) shows a discrete mononuclear molecule with nine-coordinated {EuN₃O₆} distorted tricapped-trigonal prism (TTP) coordination geometry around the Eu(III). The {EuN₃O₆} core results from three nitrogen atoms and three carboxylate oxygen atoms, and two carbonyl oxygen atoms of the amide groups of dtntp ligand. The ninth coordination site is occupied by an oxygen atom of DMF as a solvent from crystallization. The designed probes have two aromatic pendant phenyl-terpyridine (Ph-tpy) moieties as photo-sensitizing antennae to impart the desirable optical properties for cellular imaging and photocytotoxicity. The photostability, coordinative saturation, and energetically rightly poised triplet states of dtntp ligand allow the efficient energy transfer (ET) from Ph-tpy to the emissive excited states of the Eu(III)/Tb(III), makes them luminescent cellular imaging probes. The Ln(III) complexes show significant binding tendency to DNA (K ~ 10⁴ M^-1), and serum proteins (BSA and HSA) (K ~ 10⁵ M^-1). The luminescent Eu(III) (1) and Tb(III) (2) complexes were utilized for cellular internalization and cytotoxicity studies due to their optimal photophysical properties. The cellular uptake studies using fluorescence imaging displayed intracellular (cytosolic and nuclear) localization in cancer cells. The complexes 1 and 2 displayed significant photocytotoxicity in HeLa cells. These results offer a modular design strategy with further scope to utilize appended N,N,N-donor tpy moiety for developing light-responsive luminescent Ln(III) bioprobes for theranostic applications.

Luminescent Lanthanide Complex Sensor for Acac and Cd2. Photochem Photobiol 2020;97:664-671. [PMID: 33301596 DOI: 10.1111/php.13366]

In this work, phenylmalonic acid (H₂ pmal) and phenanthroline (phen) are selected to react with Ln(NO₃ )₃ ·6H₂ O (Ln = Tb, Eu) to form two lanthanide coordination complex [Ln₂ (PAA)₄ (phen)₂ (NO₃ )₂ ] (Ln = Tb, Tb complex; Eu, Eu complex), PAA = deprotonated phenylacetic acid, phen = 1,10-phenanthroline). Two lanthanide complexes are stable in neutral, acid (pH = 4) and base (pH = 10) water solutions. Especially, Tb complex is a bifunctional sensor for acac and Cd²⁺ , through luminescence "turn on" and "turn off," respectively. Importantly, the limit of detections (LODs) for acac and Cd²⁺ are 90 nm and 0.5 μm, respectively. Furthermore, the sensing mechanisms are discussed in detail.

Mitochondria-Targeted Chemosensor to Discriminately and Continuously Visualize HClO and H2S with Multiresponse Fluorescence Signals for In Vitro and In Vivo Bioimaging

Bioactive molecules play a vital role in the process of regulating the redox balance in the intracellular environment, especially in maintaining the function of organelles. To explore the association and function of bioactive molecules in organelles, it is essential to develop a chemosensor tool that uses multiresponse fluorescence signals to distinguish between and track two related bioactive molecules in organelles. However, the development of sensors with multiresponse functions is still a challenging task. Herein, we present a unique and practical single chemosensor (Mito-CTC) that can monitor HClO (as an oxidative substance) and H₂S (as a reductive substance) in mitochondria (organelle targeting) with multiresponse fluorescence signals. The response of the sensor to HClO and H₂S changes from red to green and blue channel emission simultaneously, respectively, thereby providing a specific signal response to reductive/oxidative substances in the mitochondria. Using a single chemosensor, we have realized multichannel bioimaging of the exogenous and endogenous HClO and H₂S in cellular mitochondria. Additionally, the excellent properties of the sensor Mito-CTC can be used to reveal the relationship between HClO and H₂S in mitochondria. Meanwhile, Mito-CTC has been endowed with the ability to image in bacteria and zebrafish attributed to the good permeability and low cytotoxicity. Expectantly, drug-induced liver injury (DILI) caused by fluoxetine (an antidepressant drug) and the degree of drug-induced toxicity to the liver were evaluated using Mito-CTC through discriminating and imaging HClO, indicating that Mito-CTC has the potential function of evaluating the toxicity of the drug to the liver.

A highly efficient red-emitting luminescent paper-based chemosensor for hydrogen sulfide

The first discrete bimetallic europium(iii)/copper(ii) complex for the fast, sensitive and selective luminescent detection of both aqueous and gaseous hydrogen sulfide has been developed. The chemosensor displayed an impressive response time of 30 seconds and a low theoretical limit of detection (100 ppb) for gaseous hydrogen sulfide.

Promoted off-on recognition of H2O2 based on the fluorescence of silicon quantum dots assembled two-dimensional PEG-MnO2 nanosheets hybrid nanoprobe

An "off-on" assay system for H2O2 determination was developed based on assembling ultra-bright fluorescent silicon quantum dots (SiQDs) and PEG-MnO2 nanosheets. Among them, SiQDs acted as fluorometric reporter, which can effectively eliminate the interference of plant pigments under excitation of 365 nm. PEG-MnO2 nanosheets played dual function of nanoquencher and H2O2 recognizer. Unlike previous reports, the quenching mechanism of SiQDs by PEG-MnO2 nanosheets is attributed to both the associative effect of inner filter effect and the static quenching effect. Thus, the fluorescence intensity of SiQDs at 445 nm decreased with increasing concentration of PEG-MnO2 nanosheets. After addition of H2O2, PEG-MnO2 nanosheets were reduced to Mn2+, consequently resulting in the recovery of the SiQDs fluorescence. Combined with these properties, an off-on fluorescent method was built for determination of H2O2 in plant leaves with high sensitivity and selectivity. The present method has two linear ranges: from 0.05 to 1 μM with a detection limit of 0.09 μM and from 1 to 80 μM with a detection limit of 4.04 μM. Graphical abstract Schematic representation of the mechanism of SiQD/PEG-MnO2 nanoprobe for determination of H2O2.

Ratiometric and colorimetric fluorescent probe for hypochlorite monitor and application for bioimaging in living cells, bacteria and zebrafish

Hypochlorous acid (HOCl)/hypochlorite (ClO^-) was a biologically important component of reactive oxygen species (ROS) and plays a key role in human immune function systems. HOCl/ClO^- can destroy invasive bacteria and pathogens, and mediate the physiological balance of the organism with low concentrations, and cause oxidation of the biomolecules such as proteins, cholesterol and nucleic acid in biological cells, leading to a series of diseases with over capacity. Therefore, quantifying the content of HOCl/ClO^- in organisms are extremely urgent. In this work, coumarin-salicylic hydrazide Schiff base (CMSH), a ratiometric and colorimetric fluorescent probe for ClO- detection based on coumarin as the fluorophore unit was rationally designed and synthesized. The results indicated that CMSH exhibits high selectivity and sensitivity for ClO- identification. Additionally, the ratios (I₄₇₀/I₅₃₂) displayed brilliant ClO^--dependent quick and sensitive performance within 40 s and limitation of 128 nM, respectively. As well as the color of the solution changes from green to colorless accompanied by the fluorescence form green turns into blue with addition of ClO^-. Totally, CMSH has been successfully employed as ratiometric sensor to image in living cells, bacteria and zebrafish with low cytotoxicity and good permeability.

Synthesis of fluorescent G-quadruplex DNA binding ligands for the comparison of terminal group effects in molecular interaction: Phenol versus methoxybenzene

A number of new fluorescent nucleic acid binding ligands were synthesized by utilizing the non-specific thiazole orange dye as the basic scaffold for molecular design. Under simple synthetic conditions, the molecular scaffold of thiazole orange bridged with a terminal side-group (phenol or methoxybenzene) becomes more flexible because the newly added ethylene bridge is relatively less rigid than the methylene of thiazole orange. It was found that these molecules showed better selectivity towards G-quadruplex DNA structure in molecular interactions with different type of nucleic acids. The difference in terms of induced DNA-ligand interaction signal, selectivity, and binding affinity of the ligands with the representative nucleic acids including single-stranded DNA, double-stranded DNA, telomere and promoter G4-DNA and ribosomal RNA were investigated. The position of the terminal methoxyl groups was found showing strong influence both on binding affinity and fluorescent discrimination among 19 nucleic acids tested. The ligand with a methoxyl group substituted at the meta-position of the styryl moiety exhibited the best fluorescent recognition performance towards telo21 G4-DNA. A good linear relationship between the induced fluorescent binding signal and the concentration of telo21 was obtained. The comparison of ligand-DNA interaction properties including equilibrium binding constants, molecular docking, G4-conformation change and stabilization ability for G4-structures was also conducted. Two cancer cell lines (human prostate cancer cell (PC3) and human hepatoma cell (hepG2)) were selected to explore the inhibitory effect of the ligands on the cancer cell growth. The IC₅₀ values obtained in the MTT assay for the two cancer cells were found in the range of 3.4-10.8 μM.

3,5-Dihydroxy Benzoic Acid-Capped CaF2:Tb3+ Nanocrystals as Luminescent Probes for the WO4 2- Ion in Aqueous Solution

We report a facile and effective luminescence method for the determination of the WO4 2- ion in aqueous medium at initial pH = 6.3. This is achieved using 3,5-dihydroxybenzoic acid-capped CaF2:Tb3+ (5%) nanocrystals (NCs) as a luminescent probe. This is accomplished based on the energy transfer luminescence from the WO4 2- ion to the Tb3+ ion in small-size CaF2:Tb3+ NCs. Hydroxyl groups on the surface ligand helps in binding the tungstate ion to the surface of the NCs. With the gradual addition of the WO4 2- ion, the intensity of the Tb3+ excitation and emission spectra significantly increased. The linear range of the detection was from 1 to 10 μM for the WO4 2- ion (R 2 = 0.99). The calculated detection limit was 0.4 μM (by applying the 3σ/K criterion).

FRET-based sensor for visualizing pH variation with colorimetric/ratiometric strategy and application for bioimaging in living cells, bacteria and zebrafish

Acid–base balance plays a key role in regulating biological processes, and the cells must stabilize the pH within a certain range, and pH instability will cause a series of diseases.

A terbium(iii) luminescent ATCUN-based peptide sensor for selective and reversible detection of copper(ii) in biological media

Detection of copper(ii) in biological media via time-delayed luminescence by a selective and reversible terbium(iii)-luminescent peptide sensor with pM affinity.

Waste PET as a Reactant for Lanthanide MOF Synthesis and Application in Sensing of Picric Acid

In this study, a lanthanide metal organic framework based on the ligand of terephthalic acid derived from waste polyethylene terephthalate (PET) bottles was designed and synthesized. The structure and morphology of the Tb-BDC was investigated by X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM). The Tb-BDC displays a high selectivity and sensitivity towards picric acid (TNP). The luminescence intensities exhibit a linear relation, with a concentration of TNP over the range of 1 × 10^-5-1 × 10^-4 M, with a limit of detection of 1 × 10^-5 M. The sensing mechanism is also discussed. This is the first time that waste PET materials have been used as the starting precursor of terephthalic acid (BDC) for the fabrication of lanthanide MOF (metal organic framework), which is applied in sensing TNP.

Recent Progress in Metal-Organic Framework (MOF) Based Luminescent Chemodosimeters

Metal-organic frameworks (MOFs), as a class of crystalline hybrid architectures, consist of metal ions and organic ligands and have displayed great potential in luminescent sensing applications due to their tunable structures and unique photophysical properties. Until now, many studies have been reported on the development of MOF-based luminescent sensors, which can be classified into two major categories: MOF chemosensors based on reversible host-guest interactions and MOF chemodosimeters based on the irreversible reactions between targets with a probe. In this review, we summarize the recently developed luminescent MOF-based chemodosimeters for various analytes, including H2S, HClO, biothiols, fluoride ions, redox-active biomolecules, Hg2+, and CN-. In addition, some remaining challenges and future perspectives in this area are also discussed.

Conformationally Induced Off-On Two-Photon Fluorescent Bioprobes for Dynamically Tracking the Interactions among Multiple Organelles

Unveiling the synergism among multiple organelles for fully exploring the mysteries of the cell has drawn more and more attention. Herein, we developed two two-photon fluorescent bioprobes (Lyso-TA and Mito-QA), of which the conformational change triggered an "off-on" fluorescent response. Lyso-TA can real-time monitor the fusion and movement of lysosomes as well as unveil the mitophagy process with the engagement of lysosomes. Mito-QA was transformed from Lyso-TA by one-step ambient temperature reaction, visualizing the dysfunctional mitochondria through a shift from mitochondria to nucleoli. With superior two-photon absorption cross section, good biocompatibility, and greater penetration depth, two small bioprobes were both applied in in vivo bioimaging of brain tissues and zebrafish.

Effects of europium spectral probe interchange in Ln-dyads with cyclen and phen moieties

Antenna-lanthanide energy transfer is investigated via a bimetallic complex with one silent and one probe lanthanide ion, when their positions are interchanged in the complex.

Ratiometric photoacoustic nanoprobes for monitoring and imaging of hydrogen sulfide in vivo

Detection and visualization of hydrogen sulphide (H2S) is crucial for understanding its physiological and pathological roles towards human health and diseases, but precisely tracking of H2S in vivo remains challenging due to the limitations of available analytical methods. In this study, we developed a novel ratiometric photoacoustic (PA) nanoprobe for selective detection and imaging of H2S in biological fluids, live cells, brain tissues and animals. The nanoprobe AzHD-LP was fabricated by encapsulation of a newly synthesized H2S-responsive near-infrared (NIR) dye (AzHD) within a liposome (LP). The as-prepared AzHD-LP exhibits a dramatically red-shift response of its absorption peak after reduction reaction of AzHD with H2S: the absorbance of AzHD-LP centered at 600 and 700 nm is decreased and increased, respectively, producing a turn-on ratiometric PA signal in the presence of H2S. Typically, under the excitation of a 532 nm and 700 nm pulsed laser, the selective detection and imaging of H2S was achieved in aqueous solution, living cells and brain tissues of Alzheimer's diseased mice. Moreover, after AzHD-LP conjugated with a tumor-targeting peptide - c(RGDyK) as RGD-AzHD-LP - ratiometric PA mapping of the intratumoral generated H2S in the HCT116 colon tumor-bearing live mice was demonstrated.

Dynamic Ultralong Organic Phosphorescence by Photoactivation

Smart materials with ultralong phosphorescence are rarely investigated and reported. Herein we report on a series of molecules with unique dynamic ultralong organic phosphorescence (UOP) features, enabled by manipulating intermolecular interactions through UV light irradiation. Our experimental data reveal that prolonged irradiation of single-component organic phosphors of PCzT, BCzT, and FCzT under ambient conditions can activate UOP with emission lifetimes spanning from 1.8 to 1330 ms. These phosphors can also be deactivated back to their original states with short-lived phosphorescence by UV irradiation for 3 h at room temperature or through thermal treatment. Additionally, the dynamic UOP was applied successfully for a visual anti-counterfeiting application. These findings may provide unique insight into dynamic molecular motion for optical processing and expand the scope of smart-response materials for broader applications.

A luminescent europium-dipicolinic acid nanohybrid for the rapid and selective sensing of pyrophosphate and alkaline phosphatase activity

As a ubiquitous hydrolysis enzyme in phosphate metabolism, alkaline phosphatase (ALP) is a significant biomarker in laboratory research and clinic diagnosis. Herein, we report a highly water-soluble Eu(DPA)3@Lap nanohybrid material for the rapid and selective assay of PPi and ALP through a luminescence off-on recognition process. Eu(DPA)3@Lap was successfully prepared in an aqueous solution, and it exhibited strong luminescence emission, high photostability, and long lifetime. More interestingly, the strong luminescence of Eu(DPA)3@Lap can be remarkably quenched by Cu2+ due to the high impetus of coordination between the DPA ligand and Cu2+ ion. Using Cu2+ as a signal transducer, the luminescence could be recovered upon the addition of PPi ion owing to the formation of a Cu2+-PPi complex; thus, a luminescence turn-on assay for PPi ions was realized. Utilizing the ability of Cu2+ to differentiate between PPi and Pi, a convenient and straightforward luminescence assay for ALP activity was accomplished based on the specific dephosphorylation of PPi to Pi. To the best of our knowledge, this elaborate luminescence sensing system constitutes the first luminescent nanohybrid material based on a europium organic complex for ALP activity assay. Furthermore, the recognition process of PPi and ALP was completed in a convenient and facile mix-and-readout manner, and it revealed significant potential in point of care testing.

Sulfide Species Optical Monitoring by a Miniaturized Silicon Photomultiplier

The monitoring of water-soluble pollutants is receiving a growing interest from the scientific community. In this context, sulfide anion species S2- and HS- are particularly relevant since they can cause acute and chronic toxicity including neurological effects and at high concentrations, even death. In this study, a new strategy for fast and sensitive optical detection of sulfide species in water samples is described. The method uses an integrated silicon photomultiplier (SiPM) device coupled with the appropriate analytical strategy applied in a plastic microchip with dried reagents on board. More specifically, all sulfide species (H₂S, HS- and S2-) in water samples are detected by the fluorescence signal emitted upon the reaction with N,N-dimethyl-phenylenediamine sulfate in the presence of Fe3+, leading to the formation of the fluorescent methylene blue (MB) species. It has been proven that the system herein proposed is able to measure sulfide concentration in a linear range from 0-10 mg L-1 with a sensitivity value of about 6.7 µA mg-1 L and a detection limit of 0.5 mg L-1. A comparison with conventional UV-Vis detection method has been also carried out. Data show a very good linear correlation (R² = 0.98093), proving the effectiveness of the method. Results pave the way toward the development of portable and low-cost device systems for water-soluble sulfide pollutants.

Living cell imaging and sensing of hydrogen sulfide using high-efficiency fluorescent Cu-doped carbon quantum dots

A simple Cu-doped carbon quantum dot-based fluorescent sensor for H₂S sensing and intracellular bioimaging was constructed.

Time-Gated Luminescence Detection of Enzymatically Produced Hydrogen Sulfide: Design, Synthesis, and Application of a Lanthanide-Based Probe

Hydrogen sulfide (H₂S) is now recognized as an important gaseous transmitter that is involved in a variety of biological processes. Here, we report the design and synthesis of a luminescent lanthanide biosensor for H₂S, LP2-Cu(II)-Ln(III), a heterobinuclear metal complex that uses Cu(II) decomplexation to control millisecond-scale-lifetime-Tb(III)- or Eu(III)-emission intensity. LP2-Cu(II)-Ln(III) responded rapidly, selectively, and with high sensitivity to aqueous H₂S. The probe's potential for biological applications was verified by measuring the H₂S generated by the slow-releasing chemical-sulfide-donor GYY4147, by cystathionine γ-lyase (CSE), and by Na₂S-stimulated HeLa cells.

"On demand" redox buffering by H2S contributes to antibiotic resistance revealed by a bacteria-specific H2S donor

Understanding the mechanisms of antimicrobial resistance (AMR) will help launch a counter-offensive against human pathogens that threaten our ability to effectively treat common infections. Herein, we report bis(4-nitrobenzyl)sulfanes, which are activated by a bacterial enzyme to produce hydrogen sulfide (H2S) gas. We found that H2S helps maintain redox homeostasis and protects bacteria against antibiotic-triggered oxidative stress "on demand", through activation of alternate respiratory oxidases and cellular antioxidants. We discovered, a hitherto unknown role for this gas, that chemical inhibition of H2S biosynthesis reversed antibiotic resistance in multidrug-resistant (MDR) uropathogenic Escherichia coli strains of clinical origin, whereas exposure to the H2S donor restored drug tolerance. Together, our study provides a greater insight into the dynamic defence mechanisms of this gas, modes of antibiotic action as well as resistance while progressing towards new pharmacological targets to address AMR.

Responsive, Water-Soluble Europium(III) Luminescent Probes

The design principles, mechanism of action and performance of europium(III) complexes that serve as strongly emissive and responsive molecular probes in water are critically discussed. Examples of systems designed to assess pH, selected metal ions and anions, including chiral species, as well as selected small molecules and biopolymers are considered, and prospects evaluated for improved performance in more complex biological media such as in bio-fluids and within living cells. Modulation of the emission spectral form, lifetime and degree of circular polarisation can be used to quantify the spectral response and permit calibration.

Luminescent Lanthanide-Based Organic/Inorganic Hybrid Materials for Discrimination of Glutathione in Solution and within Hydrogels

Glutathione (GSH) as a biothiol is an essential peptide related to various diseases. Although multiple strategies for biothiols detection have been developed, there is increasing demand for sensors that can differentiate GSH from cysteine (Cys) and homocysteine (Hcy), owing to the similar structures and thiol groups in these amino acids. Herein, we report a novel Eu³⁺/LAPONITE (Lap)-based organic/inorganic hybrid material for selective detection of GSH via an "off-on" process. The fluorescence of Eu(DPA)₃@Lap-Tris can be quenched by Cu²⁺ through photoinduced electron transfer (PET). The addition of GSH into the Eu(DPA)₃@Lap-Tris/Cu²⁺ system induces the removal of Cu²⁺ from Eu(DPA)₃@Lap-Tris and blocks PET, resulting in the recovery of fluorescence. This proposed assay demonstrates higher selectivity toward GSH than Cys and Hcy, and showed a detection limit of 162 nM within a linear range of 0.5-30 μM. Unlike other GSH selective sensors, this platform could be formed into a hydrogel while its sensitivity was maintained. The sensitive response to GSH in serum samples makes this platform an efficient tool for biological applications because of its ease of preparation, high selectivity, good biocompatibility, and low toxicity.

One-pot fabrication of FRET-based fluorescent probe for detecting copper ion and sulfide anion in 100% aqueous media

The design of effective tools for detecting copper ion (Cu²⁺) and sulfide anion (S^2-) is of great importance due to the abnormal level of Cu²⁺ and S^2- has been associated with an increase in risk of many diseases. Herein, we report on the fabrication of fluorescence resonance energy transfer (FRET) based fluorescent probe PF (PEI-FITC) for detecting Cu²⁺ and S^2- in 100% aqueous media via a facile one-pot method by covalent linking fluorescein isothiocyanate (FITC) with branched-polyethylenimine (b-PEI). PF could selectively coordinate with Cu²⁺ among 10 metal ions to form PF-Cu²⁺ complex, resulting in fluorescence quenching through FRET mechanism. Furthermore, the in situ generated PF-Cu²⁺ complex can be used to selectively detect S^2- based on the displacement approach, resulting in an off-on type sensing. There is no obvious interference from other anions, such as Cl^-, NO₃^-, ClO₄^-, SO₄^2-, HCO₃^-, CO₃^2-, Br^-, HPO₄^2-, F^- and S₂O₃^2-. In addition, PF was successfully used to determine Cu²⁺ and S^2- in human serum and tap water samples. Therefore, the FRET-based probe PF may provide a new method for selective detection of multifarious analysts in biological and environmental applications, and even hold promise for application in more complicated systems.

A Colorimetric Sensor for the Highly Selective Detection of Sulfide and 1,4-Dithiothreitol Based on the In Situ Formation of Silver Nanoparticles Using Dopamine

Hydrogen sulfide (H₂S) has attracted attention in biochemical research because it plays an important role in biosystems and has emerged as the third endogenous gaseous signaling compound along with nitric oxide (NO) and carbon monoxide (CO). Since H₂S is a kind of gaseous molecule, conventional approaches for H₂S detection are mostly based on the detection of sulfide (S^2-) for indirectly reflecting H₂S levels. Hence, there is a need for an accurate and reliable assay capable of determining sulfide in physiological systems. We report here a colorimetric, economic, and green method for sulfide anion detection using in situ formation of silver nanoparticles (AgNPs) using dopamine as a reducing and protecting agent. The changes in the AgNPs absorption response depend linearly on the concentration of Na₂S in the range from 2 to 15 μM, with a detection limit of 0.03 μM. Meanwhile, the morphological changes in AgNPs in the presence of S^2- and thiol compounds were characterized by transmission electron microscopy (TEM). The as-synthetized AgNPs demonstrate high selectivity, free from interference, especially by other thiol compounds such as cysteine and glutathione. Furthermore, the colorimetric sensor developed was applied to the analysis of sulfide in fetal bovine serum and spiked serum samples with good recovery.

A luminogenic lanthanide-based probe for the highly selective detection of nanomolar sulfide levels in aqueous samples

A novel bimetallic terbium(iii)/copper(ii) complex for the luminescent detection of hydrogen sulfide in aqueous samples is described.

A β-diketonate–europium(iii) complex-based fluorescent probe for highly sensitive time-gated luminescence detection of copper and sulfide ions in living cells

A strongly fluorescent β-diketonate–europium(iii) complex was developed for highly sensitive imaging of intracellular copper and sulfide ions with time-gated luminescence mode.

Dual-emissive nanoarchitecture of lanthanide-complex-modified silica particles for in vivo ratiometric time-gated luminescence imaging of hypochlorous acid

A dual-emissive nanoarchitecture of lanthanide-complex-modified silica particles was developed for real-time ratiometric time-gated luminescence imaging of HClO in vivo.

We have developed a ratiometric time-gated luminescence sensory system for in vivo imaging of hypochlorous acid (HClO) by preparing a dual-emissive nanoarchitecture of europium- and terbium-complex-modified silica nanoparticles. The design of this nanoarchitecture is based on our new finding that the strong, long-lived luminescence of the β-diketonate–Eu³⁺ complex can be rapidly and selectively quenched by HClO. Therefore, the β-diketonate–Eu³⁺ complex was decorated on the surface of the silica nanoparticles for responding to HClO, while a HClO-insensitive luminescent terbium complex was immobilized in the inner solid core of the nanoparticles to serve as an internal standard. This nanosensing probe combines the advantages of both ratiometric and time-gated detection modes to afford high accuracy and sensitivity. Upon exposure to HClO, the nanoprobe displayed a remarkable luminescence color change from red to green, and the intensity ratio of the green over the red luminescence (I₅₃₉/I₆₀₇) showed a rapid, sensitive and selective response to HClO. Additionally, the feasibility of using the nanoprobe for intracellular detection of exogenous and endogenous HClO and for real-time mapping of HClO in small laboratory animals has been demonstrated via ratiometric time-gated luminescence imaging microscopy. The results reveal that the constructed nanoarchitecture cloud is a favorable and useful sensing probe for the real-time imaging of HClO in vivo with high specificity and contrast.

A new luminescent lanthanide supramolecular network possessing free Lewis base sites for highly selective and sensitive Cu2+ sensing

Illustration of the probable quenching mechanism and the qualitative/quantitative relationship between Tb luminescent intensity and the analyte concentration.