Preparation of Pickering emulsions stabilized by metal organic frameworks using oscillatory woven metal micro-screen

Microstructural and rheological investigation of upcycled metal-organic frameworks stabilized Pickering emulsions

HYPOTHESIS

Stabilizing Pickering emulsions with metal-organic frameworks (MOFs) is a known way to incorporate them into hierarchically porous materials. Studies generally focus on their final properties and emulsion microstructures are rarely precisely described. Our hypothesis was that characterizing the microstructural and rheological properties of Pickering emulsions stabilized solely by Al-based MOFs (MIL-96) particles would provide insights into how to control their stability and workability for potential industrial applications.

EXPERIMENTS

MIL-96(Al) particles, obtained from Li-ion battery waste were used to stabilize paraffin-in-water Pickering emulsions. The influence of the formulation parameters (paraffin/water volume ratio and MIL-96(Al) content) were investigated and the emulsions were analysed using optical microscopy, cryo-scanning electron microscopy and rheological measurements.

FINDINGS

MIL-96(Al) efficiently stabilized paraffin-in-water emulsions with up to 80% of internal phase. The emulsions with a low paraffin volume fraction had large droplets and a fluid gel-like texture. The emulsions with higher paraffin volume fractions were more compact and had two-step flow curves. In this system, excess MIL-96(Al) particles aggregated in the continuous phase as flocs interact with particles adsorbed at the paraffin-water interface, creating a secondary network that has to be broken for flow to resume. This behaviour may be interesting to investigate in other MOF-stabilized emulsions.

Buckling Effect of Sole Zeolitic Imidazolate Framework-8 Nanoparticles Adsorbed at the Water/Oil Interface

The buckling phenomenon of sole zeolitic imidazolate framework-8 (ZIF-8) particles adsorbed at the water/oil interface was systematically studied. The droplet of ZIF-8 water dispersion was pended in oil for a certain time period and manually extracted to decrease the volume. With the reduction of interfacial area, the ZIF-8 particles were jammed together to form a wrinkling solid film at the water/oil interface, which could withstand the extraction of the droplet and be regenerated. The size and concentration of the particles affected the assembly kinetics. The rapidest assembly was observed for the medium-sized ZIF-8 particles (m-ZIF-8) among the three sizes tested (1.81 μm, 258 nm, and 51 nm). The droplet of 0.91 wt % m-ZIF-8 reached a nearly full surface coverage in 13 min, faster than those with the lower concentration of 0.46 or 0.28 wt %. The pH of the solution, ranging between 6 and 10.7, affected both the assembly kinetics and film stability. Cryo-scanning electron microscopy images of frozen m-ZIF-8-stabilized Picking emulsions showed a monolayer of ZIF-8 wetted by both oil and water phases. The observed buckling effect could be attributed to the stable adsorption of ZIF-8 at the water/oil interface and the interparticle interactions, related to the unique surface chemistry and polyhedral shape of the ZIF-8 crystals. This work provided some understanding on the interfacial property of ZIF-8 and the mechanism of sole ZIF-8-stabilized Pickering emulsions.

Zeolitic imidazolate framework-67 for shape stabilization and enhanced thermal stability of paraffin-based phase change materials

Zeolitic imidazolate framework-67 (ZIF-67), a new kind of metal-organic framework, has large surface area as well as outstanding thermal and chemical stability. In this paper, micro-sized ZIF-67 crystals were prepared and further employed as the reinforcing material to design novel paraffin-based composite phase change materials (PCMs) with a polymethyl methacrylate (PMMA) shell. The composite PCMs were fabricated by using a ZIF-67 crystal-stabilized oil-in-water (O/W) Pickering emulsion as a template. Morphologies and thermal properties of the prepared composite PCMs with different contents of ZIF-67 crystals were determined by SEM, DSC and TGA. Results showed that the ZIF-67 concentration in the emulsion system has a significant effect on the microstructure, phase change behavior and thermal stability of the resultant composite PCMs. When adding 1.5 g of ZIF-67 crystals, the resultant composite PCMs achieved a stable sphere-like structure and had about 106.06 J g-1 of latent heat. The prepared composite PCMs also exhibited a good thermal stability. Compared with pure paraffin, the thermostability of the shape-stabilized paraffin was significantly enhanced at a low content of ZIF-67 crystals.

Characterization and Mechanisms of Novel Emulsions and Nanoemulsion Gels Stabilized by Edible Cyclodextrin-Based Metal-Organic Frameworks and Glycyrrhizic Acid

In this study, a novel emulsion stabilized by nano-cyclodextrin-based metal-organic frameworks and glycyrrhizic acid (CD-MOF/GA) was successfully fabricated, exhibiting long-term storage stability. The characterization and mechanisms for the emulsion formation with CD-MOF/GA were studied. The phase change of the emulsions from sol to gel could be controlled using different oil fractions and mass ratios of CD-MOF and GA. The rheological results showed that the emulsions were transformed from liquid emulsions to emulsion gels when the oil fractions were higher than 0.3 and the mass ratio of CD-MOF and GA was 1:3. The low-field nuclear magnetic resonance results revealed that the T₂₂ relaxation time of emulsions decreased from 403.702 to 231.013 ms when the oil fractions increased from 0.1 to 0.6, indicating that movable water was converted to constructal water. The emulsions showed good stability, even in high-alkaline pH and high-temperature conditions.

Versatile design and synthesis of mesoporous sulfonic acid catalysts

Mesoporous sulfonic acid catalysts (MSAC) are widely used in acid-catalyzed reactions, including biomass conversions with plenty of polar solvents and precursors. The catalytic efficiency of MSAC is greatly affected by the microenvironment around the sulfonic acid sites. In this review, the progress on modification of microenvironment of MSAC is reviewed over the past decade. Hydrophobic modification allows MSAC prevent the adhesion of water molecules onto sulfonic acid sites, to abate the risk of reduced acid strength and catalytic efficiency. In comparison, hydrophilic properties can bring positive effect on acid-catalyzed reactions with the aid of hydrophilic interaction between polar functional groups on MSAC and hydrophilic groups of specific substrates. Amphiphilic MSAC with tunable wettability for specific substrates and solvents tend to improve the efficiency in certain reactions with mixed solvents or reactants of different polarity, especially for biphasic systems of immiscible liquids. Furthermore, much attention has been attracted on modification of surface to simulate the microenvironment of homogeneous solvents and enzyme biocatalysts in recent research. New trends of this field are also highlighted.

Effect of oil structure on cyclodextrin-based Pickering emulsions for bupivacaine topical application

Cyclodextrins (CDs) coupled with oils forms an insoluble inclusion complex that is able to adsorb to the interface between oils and aqueous phases; it thereby stabilizes Pickering emulsions. Three types of oils (triglyceride, linear chain oil, and ring-structured oil) were chosen to work with CDs to prepare bupivacaine (BPC)-encapsulated Pickering emulsions. We also investigated the relationship between oils and CDs; as well as their influences on stability, drug-releasing capability and skin permeability. Particle sizes and microstructures were determined by dynamic light scattering and scanning electron microscopy, respectively. In vitro drug release studies and in vitro skin permeation studies were evaluated by using Franz diffusion model. Particle sizes of all Pickering emulsions were larger than 1μm, and the morphology was spherical and covered with rough surfaces. BPC was released over an extended period, and the releasing ratios from Pickering emulsions were only 12.2%-23.1% after 48h. In skin permeation studies, compared with other formulations, a formula involved with ring-structured oil allowed the highest permeation amount through skin. However, after 24h of exposure, formulation operated with linear chain oil showed the highest skin-retaining amount. These results suggest that Pickering emulsions could regulate the target site of skin depending on various types of oil used.

Production of Concentrated Pickering Emulsions with Narrow Size Distributions Using Stirred Cell Membrane Emulsification

Stirred cell membrane emulsification (SCME) has been employed to prepare concentrated Pickering oil in water emulsions solely stabilized by fumed silica nanoparticles. The optimal conditions under which highly stable and low-polydispersity concentrated emulsions using the SCME approach are highlighted. Optimization of the oil flux rates and the paddle stirrer speeds are critical to achieving control over the droplet size and size distribution. Investigating the influence of oil volume fraction highlights the criticality of the initial particle loading in the continuous phase on the final droplet size and polydispersity. At a particle loading of 4 wt %, both the droplet size and polydispersity increase with increasing of the oil volume fraction above 50%. As more interfacial area is produced, the number of particles available in the continuous phase diminishes, and coincidently a reduction in the kinetics of particle adsorption to the interface resulting in larger polydisperse droplets occurs. Increasing the particle loading to 10 wt % leads to significant improvements in both size and polydispersity with oil volume fractions as high as 70% produced with coefficient of variation values as low as ∼30% compared to ∼75% using conventional homogenization techniques.

Recent Studies of Pickering Emulsions: Particles Make the Difference

In recent years, emulsions stabilized by micro- or nanoparticles (known as Pickering emulsions) have attracted much attention. Micro- or nanoparticles, as the main components of the emulsion, play a key role in the preparation and application of Pickering emulsions. The existence of particles at the interface between the oil and aqueous phases affects not only the preparation, but also the properties of Pickering emulsions, affording superior stability, low toxicity, and stimuli-responsiveness compared to classical emulsions stabilized by surfactants. These advantages of Pickering emulsions make them attractive, especially in biomedicine. In this review, the effects of the characteristics of micro- and nanoparticles on the preparation and properties of Pickering emulsions are introduced. In particular, the preparation methods of Pickering emulsions, especially uniform-sized emulsions, are listed. Uniform Pickering emulsions are convenient for both mechanistic research and applications. Furthermore, some biomedical applications of Pickering emulsions are discussed and the problems hindering their clinical application are identified.

Structured microparticles with tailored properties produced by membrane emulsification

This paper provides an overview of membrane emulsification routes for fabrication of structured microparticles with tailored properties for specific applications. Direct (bottom-up) and premix (top-down) membrane emulsification processes are discussed including operational, formulation and membrane factors that control the droplet size and droplet generation regimes. A special emphasis was put on different methods of controlled shear generation on membrane surface, such as cross flow on the membrane surface, swirl flow, forward and backward flow pulsations in the continuous phase and membrane oscillations and rotations. Droplets produced by membrane emulsification can be used for synthesis of particles with versatile morphology (solid and hollow, matrix and core/shell, spherical and non-spherical, porous and coherent, composite and homogeneous), which can be surface functionalised and coated or loaded with macromolecules, nanoparticles, quantum dots, drugs, phase change materials and high molecular weight gases to achieve controlled/targeted drug release and impart special optical, chemical, electrical, acoustic, thermal and magnetic properties. The template emulsions including metal-in-oil, solid-in-oil-in-water, oil-in-oil, multilayer, and Pickering emulsions can be produced with high encapsulation efficiency of encapsulated materials and narrow size distribution and transformed into structured particles using a variety of solidification processes, such as polymerisation (suspension, mini-emulsion, interfacial and in-situ), ionic gelation, chemical crosslinking, melt solidification, internal phase separation, layer-by-layer electrostatic deposition, particle self-assembly, complex coacervation, spray drying, sol-gel processing, and molecular imprinting. Particles fabricated from droplets produced by membrane emulsification include nanoclusters, colloidosomes, carbon aerogel particles, nanoshells, polymeric (molecularly imprinted, hypercrosslinked, Janus and core/shell) particles, solder metal powders and inorganic particles. Membrane emulsification devices operate under constant temperature due to low shear rates on the membrane surface, which range from (1-10)×10(3) s(-1) in a direct process to (1-10)×10(4) s(-1) in a premix process.