Activation of muscle amine functional groups using eutectic mixture to enhance tissue adhesiveness of injectable, conductive and therapeutic granular hydrogel for diabetic ulcer regeneration

Herein, Polydopamine-modified microgels and microgels incorporated with superficial epoxy groups were synthesized and applied as precursors for the fabrication of four granular hydrogels. To enhance the tissue adhesiveness, a ternary deep eutectic solvent was synthesized to activate the muscle amine functional groups facilitating the formation of robust NC bonds at ambient conditions. At a certain shear rate of 10 s-1, hydrogel DMG displayed a viscosity of 9×103 Pa/s, representing the highest complex viscosity among the tested hydrogels primarily driven by quinone groups in PDA which enhanced reversible interactions, thereby increasing particle cohesion. Moreover, the intersection point escalating from about 4×103 to approximately 9×104 as the concentration of DMG increased from 0 % (for MG) to 70% (7D3MG) by weight. There was a decrease in adhesion strength from 0.45 ± 0.08 N in MG to 0.39 ± 0.16 N, 0.35± 0.18 N, and 0.33 ± 0.15 N for 3D7MG, 7D3MG, and DMG respectively, suggesting that MG was capable of forming numerous covalent bonds, thereby enhancing its adhesion to the substrate. The type of eutectic mixture affected the electrical conductivity and a very important point was the changes in resistance value with time. For MG catalyzed by [DES]AZG, the resistance increased only by 1.3 % (from 3.37 to 3.81 kΩ) at day 3 and 37.09 % (from 3.37 to 4.62 kΩ) at day 5. The 3D7MG hydrogel exhibited superior therapeutic efficacy toward diabetic wound regeneration. The proliferation index value for 3D7MG-[DES]AZG and 3D7MG-[DES]AG were calculated 42.3 % and 58.6 %, respectively, while the control group exhibited a lower value of 37.8 %.

Advances in nucleic acid delivery strategies for diabetic wound therapy

In recent years, the prevalence of diabetic wounds has significantly increased, posing a substantial medical challenge due to their propensity for infection and delayed healing. These wounds not only increase mortality rates but also lead to amputations and severe mobility issues. To address this, advancements in bioactive molecules such as genes, growth factors, proteins, peptides, stem cells, and exosomes into targeted gene therapies have emerged as a preferred strategy among researchers. Additionally, the integration of photothermal therapy (PTT), nucleic acid, and gene therapy, along with 3D printing technology and the layer-by-layer (LBL) self-assembly approach, shows promise in diabetic wound treatment. Effective delivery of small interfering RNA (siRNA) relies on gene vectors. This review provides an in-depth exploration of the pathophysiological characteristics observed in diabetic wounds, encompassing diminished angiogenesis, heightened levels of reactive oxygen species, and impaired immune function. It further examines advancements in nucleic acid delivery, targeted gene therapy, advanced drug delivery systems, layer-by-layer (LBL) techniques, negative pressure wound therapy (NPWT), 3D printing, hyperbaric oxygen therapy, and ongoing clinical trials. Through the integration of recent research insights, this review presents innovative strategies aimed at augmenting the multifaceted management of diabetic wounds, thus paving the way for enhanced therapeutic outcomes in the future.

Bioactive Hydrogels Inspired by Laminin: An Emerging Biomaterial for Tissue Engineering Applications

Tissue or organ damage due to severe injuries or chronic diseases can adversely affect the quality of life. Current treatments rely on organ or tissue transplantation which has limitations including unavailability of donors, ethical issues, or immune rejection after transplantations. These limitations can be addressed by tissue regeneration which involves the development of bioactive scaffolds closely mimicking the extracellular matrix (ECM). One of the major components of ECM is the laminin protein which supports several tissues associated with important organs. In this direction, peptide-based hydrogels can effectively mimic the essential characteristics of laminin. While several reports have discussed the structure of laminin, the potential of laminin-derived peptide hydrogels as effective biomaterial for tissue engineering applications is yet to be discussed. In this context, the current review focuses on the structure of laminin and its role as an essential ECM protein. Further, the potential of short peptide hydrogels in mimicking the crucial properties of laminin is proposed. The review further highlights the significance of bioactive hydrogels inspired by laminin - in addressing numerous tissue engineering applications including angiogenesis, neural, skeletal muscle, liver, and adipose tissue regeneration along with a brief outlook on the future applications of these laminin-based hydrogels.

A Novel Food Bore Protein Hydrogel with Silver Ions for Promoting Burn Wound Healing

Hydrogels have emerged as a promising option for treating local scald wounds due to their unique physical and chemical properties. This study aims to evaluate the efficacy of ovalbumin/gelatin composite hydrogels in repairing deep II-degree scald wounds using a mouse dorsal skin model. Trauma tissues collected at various time points are analyzed for total protein content, hydroxyproline content, histological features, and expression of relevant markers. The results reveal that the hydrogel accelerates the healing process of scalded wounds, which is 17.27% higher than the control group. The hydrogel treatment also effectively prevents wound enlargement and redness of the edges caused by infection during the initial stage of scalding. The total protein and hydroxyproline content of the treated wounds are significantly elevated. Additionally, the hydrogel up-regulates the expression of VEGF (a crucial angiogenic factor) and down-regulates CD68 (a macrophage marker). In summary, this study provides valuable insights into the potential of multifunctional protein-based hydrogels in wound healing.

Exploring a Solvent Dependent Strategy to Control Self-Assembling Behavior and Cellular Interaction in Laminin-Mimetic Short Peptide based Supramolecular Hydrogels

Self-assembled hydrogels, fabricated through diverse non-covalent interactions, have been extensively studied in regenerative medicines. Inspired from bioactive functional motifs of ECM protein, short peptide sequences have shown remarkable abilities to replicate the intrinsic features of the natural extracellular milieu. In this direction, we have fabricated two short hydrophobic bioactive sequences derived from the laminin protein i. e., IKVAV and YIGSR. Based on the substantial hydrophobicity of these peptides, we selected a co-solvent approach as a suitable gelation technique that included different concentrations of DMSO as an organic phase along with an aqueous solution containing 0.1 % TFA. These hydrophobic laminin-based bioactive peptides with limited solubility in aqueous physiological environment showed significantly enhanced solubility with higher DMSO content in water. The enhanced solubility resulted in extensive intermolecular interactions that led to the formation of hydrogels with a higher-order entangled network along with improved mechanical properties. Interestingly, by simply modulating DMSO content, highly tunable gels were accessed in the same gelator domain that displayed differential physicochemical properties. Further, the cellular studies substantiated the potential of these laminin-derived hydrogels in enhancing cell-matrix interactions, thereby reinforcing their applications in tissue engineering.

Multifunctional self-healing peptide hydrogel for wound healing

The complete healing of wounds remains a challenge in clinical care. In addition, various complications such as inflammation and infection that may occur during skin wound healing can impede the healing process. Here, we constructed a multifunctional self-repairing hydrogel by utilizing Schiff base bonds. This hydrogel exhibited good self-healing properties and could cope with destructive external influences. The self-healing hydrogel was injectable, ensuring that the hydrogel dressing adhered to the wound. Carboxymethyl chitosan and oxidized chondroitin sulfate demonstrated good biocompatibility and multiple bioactivities and were successfully used to prepare self-healing hydrogels. Meanwhile, the SIKVAV biopeptide was less expensive and more morphologically stable than vascular endothelial growth factor and had a high pro-angiogenic activity. Thus, the SIKVAV biopeptide was cross-linked to the oxidized chondroitin sulfate of the hydrogel through covalent bonding to avoid rapid biopeptide degradation, achieving a slow release of the drug. This peptide hydrogel exhibited good biocompatibility and antimicrobial properties; moreover, experiments conducted on mice revealed that it could effectively promote angiogenesis and skin tissue repair. These findings suggest that the injectable self-repairing peptide hydrogel may facilitate skin wound healing and other applications.

Multifunctional Hydrogels for the Healing of Diabetic Wounds

The healing of diabetic wounds is hindered by various factors, including bacterial infection, macrophage dysfunction, excess proinflammatory cytokines, high levels of reactive oxygen species, and sustained hypoxia. These factors collectively impede cellular behaviors and the healing process. Consequently, this review presents intelligent hydrogels equipped with multifunctional capacities, which enable them to dynamically respond to the microenvironment and accelerate wound healing in various ways, including stimuli -responsiveness, injectable self-healing, shape -memory, and conductive and real-time monitoring properties. The relationship between the multiple functions and wound healing is also discussed. Based on the microenvironment of diabetic wounds, antibacterial, anti-inflammatory, immunomodulatory, antioxidant, and pro-angiogenic strategies are combined with multifunctional hydrogels. The application of multifunctional hydrogels in the repair of diabetic wounds is systematically discussed, aiming to provide guidelines for fabricating hydrogels for diabetic wound healing and exploring the role of intelligent hydrogels in the therapeutic processes.

Electrospun nanofiber composite mat based on ulvan for wound dressing applications

Wound dressings can be used to create a temporary healing environment and expedite the wound healing process. Ulvan (ULV) is a sulfated polysaccharide with potent antiviral and anti-inflammatory activities. Polycaprolactone (PCL) is a hydrophobic biodegradable polyester that exhibits slow degradation, strong mechanical strength, and excellent biocompatibility. Electrospun nanofiber matrices mimic the microstructure of the extracellular matrix, allowing them to promote cell proliferation and differentiation. Therefore, the primary objective of this study was to fabricate a polycaprolactone-ulvan fibrous composite mat (PCL-ULV) using the electrospinning technique and to investigate its physical and chemical properties. To assess the characteristics of PCL-ULV, scanning electron microscopy (SEM) was utilized to examine its morphology and diameter distribution. Fourier transform infrared (FTIR) spectroscopy, calcofluor white staining, and monosaccharide analysis were employed to analyze the components of PCL-ULV. Additionally, the water contact angle was measured to evaluate the hydrophilicity. Furthermore, the proliferation and morphology of and gene expression in NIH3T3 fibroblasts on PCL-ULV were assessed. The results showed that the average PCL-ULV fiber diameter was significantly smaller than that of the PCL fibers. The water contact angle measurements indicated that PCL-ULV exhibited better hydrophilicity than the PCL mat. FTIR, calcofluor white staining, and monosaccharide analyses demonstrated that ULV could be successfully coelectrospun with PCL. NIH3T3 fibroblasts cultured on PCL and PCL-ULV showed different cellular behaviors. On PCL-ULV, cell adhesion, proliferation, and stretching were greater than those on PCL. Moreover, the behavior of NIH3T3 fibroblasts on PCL and PCL-ULV differed, as the cells on PCL-ULV exhibited higher proliferation and more stretching. Furthermore, NIH3T3 fibroblasts cultured on ULV-PCL showed higher α-SMA and MMP-9 gene expression and a lower ratio of TIMP-1/MMP-9 than those cultured on PCL. Notably, scarless wounds display lower TIMP/MMP expression ratios than scarring wounds. Thus, the fibrous composite mat PCL-ULV shows potential as a wound dressing for scarless wound healing.

Therapeutic Applications of Garlic and Turmeric for the Diabetic Wound Healing in Mice

Diabetes is involved in delayed wound healing that can be cured by natural products such as garlic, turmeric, and fibroin extracts. Alloxan monohydrate is used for inducing diabetes in mice. The percent wound contraction of garlic (150 mg/ml), turmeric (100 mg/ml), and fibroin (50 mg/ml), individually and in combinations garlic (150 mg/ml) + fibroin (50 mg/ml), turmeric (100 mg/ml) + fibroin (50 mg/ml), garlic (150 mg/ml) + turmeric (100 mg/ml), and garlic (150 mg/ml) + turmeric (100 mg/ml) + fibroin (50 mg/ml) was checked by evaluating the healing time, % wound contraction and histological analysis. The serum level of MMPs (MMP 2, MMP7, MMP 9), pro-inflammatory cytokines (TNF-α, IL-6, IL-8), and TIMPs were evaluated. With the combination of three extracts (Ga+Tu+Fi) garlic (150 mg/ml), turmeric (100 mg/ml) and fibroin (50 mg/ml), wounds healed in 12 days and had 97.3 ± 2.2% wound contraction. While the positive control (polyfax) and diabetic control (saline) wounds healed in 17- and 19-days with wound contraction of 96.7 ± 1.4% and 96.3 ± 1.1%, respectively. Histological analysis showed that the combination of Ga+Tu+Fi exhibited an increase in the growth of collagen fibers, fibroblasts number, and keratinocytes, and lessened inflammation of blood vessels. The combination of Ga+Tu+Fi significantly alleviated the serum concentration of TNF-α (14.2 ± 0.7 pg/ml), IL-6 (10.0 ± 1.0 pg/ml), IL-8 (16.0 ± 1.5 pg/ml), MMP2 (228.0 ± 18.1 pg/ml), MMP7 (271.0 ± 9.9 pg/ml), and MMP9 (141.0 ± 5.3 pg/ml) to diabetic control. The level of TIMPs (193.0 ± 9.1 pg/ml) was increased significantly with respect to diabetic control. We conclude that the combination of these biomaterials possessed high regenerative and healing capabilities and can be an effective remedy in the healing of chronic wounds in diabetic patients.

Polysaccharide-Based Multifunctional Hydrogel Bio-Adhesives for Wound Healing: A Review

Wound healing is a long-term and complex biological process that involves multiple hemostasis, inflammation, proliferation, and remodeling stages. In order to realize comprehensive and systematic wound management, appropriate wound treatment bio-adhesives are urgently needed. Hydrogel bio-adhesives have excellent properties and show unique and remarkable advantages in the field of wound management. This review begins with a detailed description of the design criteria and functionalities of ideal hydrogel bio-adhesives for wound healing. Then, recent advances in polysaccharide-based multifunctional hydrogel bio-adhesives, which involve chitosan, hyaluronic acid, alginate, cellulose, dextran, konjac glucomannan, chondroitin sulfate, and other polysaccharides, are comprehensively discussed. Finally, the current challenges and future research directions of polysaccharide-based hydrogel bio-adhesives for wound healing are proposed to stimulate further exploration by researchers.

Bridging wounds: tissue adhesives' essential mechanisms, synthesis and characterization, bioinspired adhesives and future perspectives

Bioadhesives act as a bridge in wound closure by forming an effective interface to protect against liquid and gas leakage and aid the stoppage of bleeding. To their credit, tissue adhesives have made an indelible impact on almost all wound-related surgeries. Their unique properties include minimal damage to tissues, low chance of infection, ease of use and short wound-closure time. In contrast, classic closures, like suturing and stapling, exhibit potential additional complications with long operation times and undesirable inflammatory responses. Although tremendous progress has been made in the development of tissue adhesives, they are not yet ideal. Therefore, highlighting and summarizing existing adhesive designs and synthesis, and comparing the different products will contribute to future development. This review first provides a summary of current commercial traditional tissue adhesives. Then, based on adhesion interaction mechanisms, the tissue adhesives are categorized into three main types: adhesive patches that bind molecularly with tissue, tissue-stitching adhesives based on pre-polymer or precursor solutions, and bioinspired or biomimetic tissue adhesives. Their specific adhesion mechanisms, properties and related applications are discussed. The adhesion mechanisms of commercial traditional adhesives as well as their limitations and shortcomings are also reviewed. Finally, we also discuss the future perspectives of tissue adhesives.

Functionalized Electrospun Double-Layer Nanofibrous Scaffold for Wound Healing and Scar Inhibition

Considerable advances have been made in developing materials that promote wound healing and inhibit scar formation in clinical settings. However, some challenges, such as cumbersome treatment processes and determination of optimal treatment time, remain unresolved. Thus, developing a multifunctional wound dressing with both wound healing and scar inhibition properties is crucial. Here, we present an integrated electrospun fibrous composite membrane (MPC12) for wound healing and scar inhibition, consisting of a quaternized chitosan-loaded inner membrane (PCQC5) and quaternized silicone-loaded outer membrane (MQP12). The inner membrane effectively coagulates blood and promotes wound healing, and the outer membrane moisturizes, resists bacteria, and inhibits scar formation. In vivo evaluation in a rabbit ear model revealed that MPC12 treatment results in faster wound healing and better alleviation of scar hypertrophy than treatment with commercial products (KELO-COTE and MSSG). Our strategy offers an excellent solution for the potential integration of wound healing and scar inhibition.

Peptide functionalized DNA hydrogel enhances neuroblastoma cell growth and differentiation

Designing programmable biomaterials that could act as extracellular matrices and permit functionalization is a current need for tissue engineering advancement. DNA based hydrogels are gaining significant attention owing to their self-assembling properties, biocompatibility, chemical robustness and low batch to batch variability. The real potential of DNA hydrogels in the biomedical domain remains to be explored. In this work, a DNA hydrogel was coated on a glass surface and coupled to a synthetic IKVAV peptide by a chemical crosslinker. We observe enhanced neuronal differentiation, prolonged neurite length, dynamic movement of microtubules and cytoskeleton, and altered endocytic mechanisms in neuroblastoma-based stem cells for the peptide modified DNA hydrogel compared to the unmodified DNA hydrogel and controls. We anticipate that a peptide-modified DNA hydrogel could emerge as a promising scaffold coating material to develop nerve tissue conduits in the future for application in neuroscience and neuroregeneration.

Electrospun Nanofibers Revisited: An Update on the Emerging Applications in Nanomedicine

Electrospinning (ES) has become a straightforward and customizable drug delivery technique for fabricating drug-loaded nanofibers (NFs) using various biodegradable and non-biodegradable polymers. One of NF's pros is to provide a controlled drug release through managing the NF structure by changing the spinneret type and nature of the used polymer. Electrospun NFs are employed as implants in several applications including, cancer therapy, microbial infections, and regenerative medicine. These implants facilitate a unique local delivery of chemotherapy because of their high loading capability, wide surface area, and cost-effectiveness. Multi-drug combination, magnetic, thermal, and gene therapies are promising strategies for improving chemotherapeutic efficiency. In addition, implants are recognized as an effective antimicrobial drug delivery system overriding drawbacks of traditional antibiotic administration routes such as their bioavailability and dosage levels. Recently, a sophisticated strategy has emerged for wound healing by producing biomimetic nanofibrous materials with clinically relevant properties and desirable loading capability with regenerative agents. Electrospun NFs have proposed unique solutions, including pelvic organ prolapse treatment, viable alternatives to surgical operations, and dental tissue regeneration. Conventional ES setups include difficult-assembled mega-sized equipment producing bulky matrices with inadequate stability and storage. Lately, there has become an increasing need for portable ES devices using completely available off-shelf materials to yield highly-efficient NFs for dressing wounds and rapid hemostasis. This review covers recent updates on electrospun NFs in nanomedicine applications. ES of biopolymers and drugs is discussed regarding their current scope and future outlook.

Strategies to Induce Blood Vessel Ingrowth into Skin Grafts and Tissue-Engineered Substitutes

Skin is a multilayer organ consisting of several tissues and appendages residing in a complex niche. Adequate and physiologically regulated vascularization is an absolute requirement for skin homeostasis, regeneration, and wound healing. The lack of vascular networks and ischemia results in delayed wound closure. In addition, vascularization is critical for the prolonged function and survival of skin grafts and tissue-engineered skin substitutes. This study highlights the clinical challenges associated with the limited vascularization in the cutaneous wounds. Then, we highlight the novel approaches for the development of vascular networks in the skin autografts, allografts, and artificial substitutes. Also, the future directions to overcome the existing vascularization complications in skin grafting and synthetic skin substitutes are presented. Statement of Significance Delayed closure of large dermal wounds, such as burn injuries, results from the lack of vascular networks and ischemia. The amount of blood supply in the skin graft is the primary factor determining the quality of the transplanted grafts. The current skin grafts and their fabrication methods lack the appropriate features that contribute to the vascularization and integration of the wound bed and graft and adherence to the skin layers. Therefore, the new generation of skin grafts should consider advanced technologies to induce vascularization and overcome current challenges.

Exploiting maleimide-functionalized hyaluronan hydrogels to test cellular responses to physical and biochemical stimuli

Currentin vitrothree-dimensional (3D) models of liver tissue have been limited by the inability to study the effects of specific extracellular matrix (ECM) components on cell phenotypes. This is in part due to limitations in the availability of chemical modifications appropriate for this purpose. For example, hyaluronic acid (HA), which is a natural ECM component within the liver, lacks key ECM motifs (e.g. arginine-glycine-aspartic acid (RGD) peptides) that support cell adhesion. However, the addition of maleimide (Mal) groups to HA could facilitate the conjugation of ECM biomimetic peptides with thiol-containing end groups. In this study, we characterized a new crosslinkable hydrogel (i.e. HA-Mal) that yielded a simplified ECM-mimicking microenvironment supportive of 3D liver cell culture. We then performed a series of experiments to assess the impact of physical and biochemical signaling in the form of RGD peptide incorporation and transforming growth factorß(TGF-ß) supplementation, respectively, on hepatic functionality. Hepatic stellate cells (i.e. LX-2) exhibited increased cell-matrix interactions in the form of cell spreading and elongation within HA-Mal matrices containing RGD peptides, enabling physical adhesions, whereas hepatocyte-like cells (HepG2) had reduced albumin and urea production. We further exposed the encapsulated cells to soluble TGF-ßto elicit a fibrosis-like state. In the presence of TGF-ßbiochemical signals, LX-2 cells became activated and HepG2 functionality significantly decreased in both RGD-containing and RGD-free hydrogels. Altogether, in this study we have developed a hydrogel biomaterial platform that allows for discrete manipulation of specific ECM motifs within the hydrogel to better understand the roles of cell-matrix interactions on cell phenotype and overall liver functionality.

Electrospun Antibacterial Nanomaterials for Wound Dressings Applications

Chronic wounds are caused by bacterial infections and create major healthcare discomforts; to overcome this issue, wound dressings with antibacterial properties are to be utilized. The requirements of antibacterial wound dressings cannot be fulfilled by traditional wound dressing materials. Hence, to improve and accelerate the process of wound healing, an antibacterial wound dressing is to be designed. Electrospun nanofibers offer a promising solution to the management of wound healing, and numerous options are available to load antibacterial compounds onto the nanofiber webs. This review gives us an overview of some recent advances of electrospun antibacterial nanomaterials used in wound dressings. First, we provide a brief overview of the electrospinning process of nanofibers in wound healing and later discuss electrospun fibers that have incorporated various antimicrobial agents to be used in wound dressings. In addition, we highlight the latest research and patents related to electrospun nanofibers in wound dressing. This review also aims to concentrate on the importance of nanofibers for wound dressing applications and discuss functionalized antibacterial nanofibers in wound dressing.

Functional Hydrogels as Wound Dressing to Enhance Wound Healing

Hydrogels, due to their excellent biochemical and mechnical property, have shown attractive advantages in the field of wound dressings. However, a comprehensive review of the functional hydrogel as a wound dressing is still lacking. This work first summarizes the skin wound healing process and relates evaluation parameters and then reviews the advanced functions of hydrogel dressings such as antimicrobial property, adhesion and hemostasis, anti-inflammatory and anti-oxidation, substance delivery, self-healing, stimulus response, conductivity, and the recently emerged wound monitoring feature, and the strategies adopted to achieve these functions are all classified and discussed. Furthermore, applications of hydrogel wound dressing for the treatment of different types of wounds such as incisional wound and the excisional wound are summarized. Chronic wounds are also mentioned, and the focus of attention on infected wounds, burn wounds, and diabetic wounds is discussed. Finally, the future directions of hydrogel wound dressings for wound healing are further proposed.

A multifunctional substance P-conjugated chitosan hydrochloride hydrogel accelerates full-thickness wound healing by enhancing synchronized vascularization, extracellular matrix deposition, and nerve regeneration

Due to the native skin limitations and the complexity of reconstructive microsurgery, advanced biomaterials are urgently required to promote wound healing for severe skin defects caused by accidents and disasters. Accumulating evidence has supported that substance P (SP) has a potential effect on skin regeneration. However, SP application is seriously impeded by its poor stability and oxidative reactions occurring during production, transportation, and storage. An SP-conjugated chitosan hydrochloride hydrogel (CSCl-SP) fabricated in this study demonstrated an enhanced capacity to repair full-thickness skin defects. CSCl-SP provided a stable in vitro delivery system for SP. The dissolution of CSCl-SP promoted the proliferation, migration, and tube formation, as well as angiogenesis-related gene and protein expression in human umbilical vein endothelial cells. CSCI-SP also stimulated the proliferation, migration, and production of anabolic growth factor in human fibroblasts. Moreover, CSCl-SP significantly promoted the neurite outgrowth in Neuro-2A cells. In vivo, CSCl-SP dramatically strengthened the vascularization, extracellular matrix deposition and remodeling, and nerve regeneration, thereby promoting efficient recovery of the full-thickness skin defect. Thus, synchronized multifunction of the CSCl-SP hydrogel makes it a promising and smart material for intractable skin defects.

Peptide-Chitosan Engineered Scaffolds for Biomedical Applications

Peptides are signaling epitopes that control many vital biological events. Increased specificity, synthetic feasibility with concomitant lack of toxicity, and immunogenicity make this emerging class of biomolecules suitable for different applications including therapeutics, diagnostics, and biomedical engineering. Further, chitosan, a naturally occurring linear polymer composed of d-glucosamine and N-acetyl-d-glucosamine units, possesses anti-microbial, muco-adhesive, and hemostatic properties along with excellent biocompatibility. As a result, chitosan finds application in drug/gene delivery, tissue engineering, and bioimaging. Despite these applications, chitosan demonstrates limited cell adhesion and lacks biosignaling. Therefore, peptide-chitosan hybrids have emerged as a new class of biomaterial with improved biosignaling properties and cell adhesion properties. As a result, recent studies encompass increased application of peptide-chitosan hybrids as composites or conjugates in drug delivery, cell therapy, and tissue engineering and as anti-microbial material. This review discusses the recent investigations involving chitosan-peptide materials and uncovers various aspects of these interesting hybrid materials for biomedical applications.

Potential Applications of Nanomaterials and Technology for Diabetic Wound Healing

Diabetic wound shows delayed and incomplete healing processes, which in turn exposes patients to an environment with a high risk of infection. This article has summarized current developments of nanoparticles/hydrogels and nanotechnology used for promoting the wound healing process in either diabetic animal models or patients with diabetes mellitus. These nanoparticles/hydrogels promote diabetic wound healing by loading bioactive molecules (such as growth factors, genes, proteins/peptides, stem cells/exosomes, etc.) and non-bioactive substances (metal ions, oxygen, nitric oxide, etc.). Among them, smart hydrogels (a very promising method for loading many types of bioactive components) are currently favored by researchers. In addition, nanoparticles/hydrogels can be combined with some technology (including PTT, LBL self-assembly technique and 3D-printing technology) to treat diabetic wound repair. By reviewing the recent literatures, we also proposed new strategies for improving multifunctional treatment of diabetic wounds in the future.

Review of Integrin-Targeting Biomaterials in Tissue Engineering

The ability to direct cell behavior has been central to the success of numerous therapeutics to regenerate tissue or facilitate device integration. Biomaterial scientists are challenged to understand and modulate the interactions of biomaterials with biological systems in order to achieve effective tissue repair. One key area of research investigates the use of extracellular matrix-derived ligands to target specific integrin interactions and induce cellular responses, such as increased cell migration, proliferation, and differentiation of mesenchymal stem cells. These integrin-targeting proteins and peptides have been implemented in a variety of different polymeric scaffolds and devices to enhance tissue regeneration and integration. This review first presents an overview of integrin-mediated cellular processes that have been identified in angiogenesis, wound healing, and bone regeneration. Then, research utilizing biomaterials are highlighted with integrin-targeting motifs as a means to direct these cellular processes to enhance tissue regeneration. In addition to providing improved materials for tissue repair and device integration, these innovative biomaterials provide new tools to probe the complex processes of tissue remodeling in order to enhance the rational design of biomaterial scaffolds and guide tissue regeneration strategies.

Thermo-responsive chitosan hydrogel for healing of full-thickness wounds infected with XDR bacteria isolated from burn patients: In vitro and in vivo animal model

Treatment of non-healing skin wounds infected with extensively drug-resistant (XDR) bacteria remains as a big challenge. To date, different biomaterials have been applied for treatment of post-wound infections, nevertheless their efficacy for treatment of the wounds infected with XDR isolates has not been determined yet. In this study, the potential of the thermo-responsive chitosan (TCTS) hydrogel for protection of full-thickness wounds XDR bacteria isolated from burn patients was evaluated both in vitro and in vivo in a rat model. Antibacterial activity of the TCTS hydrogel against standard strain and clinical isolates of Acinetobacter baumannii, cytobiocompatibility for Hu02 fibroblast cells, degradation rate and swelling ratio were determined in vitro. MTT assay and disk diffusion test indicated no detectable cytotoxicity and antibacterial activity in vitro, respectively. In vivo study showed significant acceleration of wound healing, re-epithelialization, wound closure, and decreased colony count in the TCTS hydrogel group compared with control. This study suggests TCTS hydrogel as an excellent wound dressing for management of the wounds infected with XDR bacteria, and now promises to proceed with clinical investigations.

New forms of electrospun nanofiber materials for biomedical applications

Over the past two decades, electrospinning has emerged as an enabling nanotechnology to produce nanofiber materials for various biomedical applications. In particular, therapeutic/cellloaded nanofiber scaffolds have been widely examined in drug delivery, wound healing, and tissue repair and regeneration. However, due to the insufficient porosity, small pore size, noninjectability, and inaccurate spatial control in nanofibers of scaffolds, many efforts have been devoted to exploring new forms of nanofiber materials including expanded nanofiber scaffolds, nanofiber aerogels, short nanofibers, and nanofiber microspheres. This short review discusses the preparation and potential biomedical applications of new forms of nanofiber materials.

Mesenchymal stem cell-laden, personalized 3D scaffolds with controlled structure and fiber alignment promote diabetic wound healing

The management of diabetic wounds remains a major therapeutic challenge in clinics. Herein, we report a personalized treatment using 3D scaffolds consisting of radially or vertically aligned nanofibers in combination with bone marrow mesenchymal stem cells (BMSCs). The 3D scaffolds have customizable sizes, depths, and shapes, enabling them to fit a variety of type 2 diabetic wounds. In addition, the 3D scaffolds are shape-recoverable in atmosphere and water following compression. The BMSCs-laden 3D scaffolds are capable of enhancing the formation of granulation tissue, promoting angiogenesis, and facilitating collagen deposition. Further, such scaffolds inhibit the formation of M1-type macrophages and the expression of pro-inflammatory cytokines IL-6 and TNF-α and promote the formation of M2-type macrophages and the expression of anti-inflammatory cytokines IL-4 and IL-10. Taken together, BMSCs-laden, 3D nanofiber scaffolds with controlled structure and alignment hold great promise for the treatment of diabetic wounds. STATEMENT OF SIGNIFICANCE: In this study, we developed 3D radially and vertically aligned nanofiber scaffolds to transplant bone marrow mesenchymal stem cells (BMSCs). We personalized 3D scaffolds that could completely match the size, depth, and shape of diabetic wounds. Moreover, both the radially and vertically aligned nanofiber scaffolds could completely recover their shape and maintain structural integrity after repeated loads with compressive stresses. Furthermore, the BMSCs-laden 3D scaffolds are able to promote granulation tissue formation, angiogenesis, and collagen deposition, and switch the immune responses to the pro-regenerative direction. These 3D scaffolds consisting of radially or vertically aligned nanofibers in combination with BMSCs offer a robust, customizable platform potentially for a significant improvement of managing diabetic wounds.

Coassembly Generates Peptide Hydrogel with Wound Dressing Material Properties

Multicomponent self-assembly of peptides is a powerful strategy to fabricate novel functional materials with synergetic properties that can be used for several nanobiotechnological applications. In the present study, we used a coassembly strategy to generate an injectable ultrashort bioactive peptide hydrogel formed by mixing a dipeptide hydrogelator with a macrophage attracting short chemotactic peptide ligand. Coassembly does not impede hydrogelation as shown by cryo-transmission electron microscopy (cryo-TEM), scanning electron microscopy, and rheology. Biocompatibility was shown by cytotoxicity assays and confocal microscopy. The hydrogels release the entrapped skin antibiotic ciprofloxacin, among others, in a slow and continuous manner. Such bioinspired advanced functional materials can find applications as wound dressing materials to treat chronic wound conditions like diabetic foot ulcer.

Controlling Neuronal Cell Growth through Composite Laminin Supramolecular Hydrogels

Designing an extracellular matrix mimic by biofunctionalization of polymeric scaffolds is a popular strategy and extremely crucial for facilitating the interactions between cells and the matrix. To this direction, supramolecular gels are gaining exponential attention over the last few years, owing to their potential biocompatibility and biodegradability. In spite of diverse biological roles of native laminin, the bioactivities of self-assembling laminin-derived short peptides were less explored. In this work, we have explored the minimalist design to develop hydrogel scaffolds based on IKVAV and YIGSR peptides individually and their composite matrix, which can provide structurally and functionally relevant materials for tissue engineering. Till date, composite supramolecular gels solely made up of self-assembling IKVAV and YIGSR peptides have never been reported. Such composite gels can be a closer mimic of natural laminin protein, which could mimic the essential functions of the short peptide fragments present on different chains of the extracellular matrix protein, laminin. Interestingly, we used a unique strategy of simple mixing of the two laminin mimetic peptides, which tend to induce coassembly with a self-sorted nanofibrous network with relatively enhanced mechanical strength. The physicochemical properties of the biofunctional hydrogels were studied using different microscopic, spectroscopic, and rheology techniques. To assess the bioactivity of laminin-derived scaffolds in controlling neuronal cell growth, its biocompatibility, cellular growth, and proliferation were quantified using C6 glial cells and SHSY5Y neuroblastoma cells. The live/dead staining further confirmed the adhesion and proliferation of the cells. A significant increase in neurite length provides clear evidence on mimicking the neurite extension function of native laminin protein by its short derivatives. Interestingly, similar β-III tubulin expression and cell cycle phases were observed, in comparison to control, which indicated normal cellular functioning of the cells cultured over short laminin hydrogel scaffolds. All bioassays suggested that Fmoc YIGSR promotes growth of neural cells to a greater extent and maintains healthier morphology, in comparison to hydrophobic Fmoc IKVAV, owing to the entangled longer fibrous network formed by YIGSR peptide. It is expected that thinner long fibers provide a more uniform surface and are more supportive for cell adhesion in comparison to hydrophobic, shorter fibers IKVAV peptide. However, in composite gels, the detrimental effect of hydrophobic IKVAV peptide could be reduced and better adhesion and proliferation could be achieved along with enhanced cell survival. These observations demonstrate the high potential of the laminin-derived hydrogels in tissue engineering and neuronal stem cell differentiation in future.

Investigating the Effects of Tissue-Specific Extracellular Matrix on the Adipogenic and Osteogenic Differentiation of Human Adipose-Derived Stromal Cells Within Composite Hydrogel Scaffolds

While it has been postulated that tissue-specific bioscaffolds derived from the extracellular matrix (ECM) can direct stem cell differentiation, systematic comparisons of multiple ECM sources are needed to more fully assess the benefits of incorporating tissue-specific ECM in stem cell culture and delivery platforms. To probe the effects of ECM sourced from decellularized adipose tissue (DAT) or decellularized trabecular bone (DTB) on the adipogenic and osteogenic differentiation of human adipose-derived stem/stromal cells (ASCs), a novel detergent-free decellularization protocol was developed for bovine trabecular bone that complemented our established detergent-free decellularization protocol for human adipose tissue and did not require specialized equipment or prolonged incubation times. Immunohistochemical and biochemical characterization revealed enhanced sulphated glycosaminoglycan content in the DTB, while the DAT contained higher levels of collagen IV, collagen VI and laminin. To generate platforms with similar structural and biomechanical properties to enable assessment of the compositional effects of the ECM on ASC differentiation, micronized DAT and DTB were encapsulated with human ASCs within methacrylated chondroitin sulfate (MCS) hydrogels through UV-initiated crosslinking. High ASC viability (>90%) was observed over 14 days in culture. Adipogenic differentiation was enhanced in the MCS+DAT composites relative to the MCS+DTB composites and MCS controls after 14 days of culture in adipogenic medium. Osteogenic differentiation studies revealed a peak in alkaline phosphatase (ALP) enzyme activity at 7 days in the MCS+DTB group cultured in osteogenic medium, suggesting that the DTB had bioactive effects on osteogenic protein expression. Overall, the current study suggests that tissue-specific ECM sourced from DAT or DTB can act synergistically with soluble differentiation factors to enhance the lineage-specific differentiation of human ASCs within 3-D hydrogel systems.

A skin-inspired 3D bilayer scaffold enhances granulation tissue formation and anti-infection for diabetic wound healing

We design and fabricate a bilayer 3D scaffold inspired by the structure of skin. The top layer is made of silver loaded GelMA cryogel to prevent infection. The bottom layer is made of a PDGF-BB loaded 3D printed scaffold to promotes angiogenesis and collagen deposition to accelerate granulation tissue formation.

Bone marrow-derived mesenchymal stem cells laden novel thermo-sensitive hydrogel for the management of severe skin wound healing

Bone marrow-derived mesenchymal stem cells (BMSCs) are easy to collect and culture, and it is identified that it has multi-directional differentiation potential, moreover it has low immunogenicity, hence it can be used as an allogeneic cell source for skin wound healing. Hydrogel has been widely used in skin wound healing own to it is able to mimic the 3D microenvironment of cells, which supports cell proliferation, migration and secretion. In this study, we created a novel biocompatible thermo-sensitive hydrogel to carry BMSCs for full-thickness skin wound healing. The thermo-sensitive hydrogel loaded with BMSCs can fast achieve sol-gel transition after implanting to the wound. Histological results confirmed that hydrogel-BMSCs combination group showed significant promotion of wound closure, epithelial cells' proliferation and re-epithelialization, and reduced inflammatory responses in the wounds and in the tissues surrounding the wounds. The combination therapy also can promote collagen deposition, TGF-β1 and bFGF secretion and tissue remodeling. The present study provides a promising strategy for the clinical treatment of skin wounds.

A functional chitosan-based hydrogel as a wound dressing and drug delivery system in the treatment of wound healing

Functional active wound dressings are expected to provide a moist wound environment, offer protection from secondary infections, remove wound exudate and accelerate tissue regeneration, as well as to improve the efficiency of wound healing. Chitosan-based hydrogels are considered as ideal materials for enhancing wound healing owing to their biodegradable, biocompatible, non-toxic, antimicrobial, biologically adhesive, biological activity and hemostatic effects. Chitosan-based hydrogels have been demonstrated to promote wound healing at different wound healing stages, and also can alleviate the factors against wound healing (such as excessive inflammatory and chronic wound infection). The unique biological properties of a chitosan-based hydrogel enable it to serve as both a wound dressing and as a drug delivery system (DDS) to deliver antibacterial agents, growth factors, stem cells and so on, which could further accelerate wound healing. For various kinds of wounds, chitosan-based hydrogels are able to promote the effectiveness of wound healing by modifying or combining with other polymers, and carrying different types of active substances. In this review, we will take a close look at the application of chitosan-based hydrogels in wound dressings and DDS to enhance wound healing.

Wound-Healing Peptides for Treatment of Chronic Diabetic Foot Ulcers and Other Infected Skin Injuries

As the incidence of diabetes continues to increase in the western world, the prevalence of chronic wounds related to this condition continues to be a major focus of wound care research. Additionally, over 50% of chronic wounds exhibit signs and symptoms that are consistent with localized bacterial biofilms underlying severe infections that contribute to tissue destruction, delayed wound-healing and other serious complications. Most current biomedical approaches for advanced wound care aim at providing antimicrobial protection to the open wound together with a matrix scaffold (often collagen-based) to boost reestablishment of the skin tissue. Therefore, the present review is focused on the efforts that have been made over the past years to find peptides possessing wound-healing properties, towards the development of new and effective wound care treatments for diabetic foot ulcers and other skin and soft tissue infections.

A conducive bioceramic/polymer composite biomaterial for diabetic wound healing

Diabetic wound is a common complication of diabetes. Biomaterials offer great promise in inducing tissue regeneration for chronic wound healing. Herein, we reported a conducive Poly (caprolactone) (PCL)/gelatin nanofibrous composite scaffold containing silicate-based bioceramic particles (Nagelschmidtite, NAGEL, Ca₇P₂Si₂O₁₆) for diabetic wound healing. NAGEL bioceramic particles were well distributed in the inner of PCL/gelatin nanofibers via co-electrospinning process and the Si ions maintained a sustained release from the composite scaffolds during the degradation process. The nanofibrous scaffolds significantly promoted the adhesion, proliferation and migration of human umbilical vein endothelial cells (HUVECs) and human keratinocytes (HaCaTs) in vitro. The in vivo study demonstrated that the scaffolds distinctly induced the angiogenesis, collagen deposition and re-epithelialization in the wound sites of diabetic mice model, as well as inhibited inflammation reaction. The mechanism for nanofibrous composite scaffolds accelerating diabetic wound healing is related to the activation of epithelial to mesenchymal transition (EMT) and endothelial to mesenchymal transition (EndMT) pathway in vivo and in vitro. Our results suggest that the released Si ions and nanofibrous structure of scaffolds have a synergetic effect on the improved efficiency of diabetic wound healing, paving the way to design functional biomaterials for tissue engineering and wound healing applications.

STATEMENT OF SIGNIFICANCE

In order to stimulate tissue regeneration for chronic wound healing, a new kind of conducive nanofibrous composite scaffold containing silicate-based bioceramic particles (Nagelschmidtite, NAGEL, Ca₇P₂Si₂O₁₆) were prepared via co-electrospinning process. Biological assessments revealed that the NAGEL bioceramic particles could active epithelial to mesenchymal transition (EMT) and endothelial to mesenchymal transition (EndMT) pathway in vitro and in vivo. The new composite scaffold had potential as functional biomaterials for tissue engineering and wound healing applications. The strategy of introducing controllable amount of therapeutic ions instead of loading expensive drugs/growth factors on nanofibrous composite scaffold provides new options for bioactive biomaterials.

Peptide-Modified Chitosan Hydrogels Accelerate Skin Wound Healing by Promoting Fibroblast Proliferation, Migration, and Secretion

Skin wound healing is a complicated process that involves a variety of cells and cytokines. Fibroblasts play an important role in this process and participate in transformation into myofibroblasts, the synthesis of extracellular matrix (ECM) and fibers, and the secretion of a variety of growth factors. This study assessed the effects of peptide Ser-Ile-Lys-Val-Ala-Val (SIKVAV)--modified chitosan hydrogels on skin wound healing. We investigated the capability of peptide SIKVAV to promote cell proliferation and migration, the synthesis of collagen, and the secretion of a variety of growth factors using fibroblasts in vitro. We also treated skin wounds established in mice using peptide SIKVAV-modified chitosan hydrogels. Hematoxylin and eosin staining showed that peptide-modified chitosan hydrogels enhanced the reepithelialization of wounds compared with negative and positive controls. Masson's trichrome staining demonstrated that more collagen fibers were deposited in the wounds treated with peptide-modified chitosan hydrogels compared with the negative and positive controls. Immunohistochemistry revealed that the peptide-modified chitosan hydrogels promoted angiogenesis in the skin wound. Taken together, these results suggest that peptide SIKVAV-modified chitosan hydrogels may be useful in wound dressing and the treatment of skin wounds.

Recent advances in electrospun nanofibers for wound healing

Electrospun nanofibers represent a novel class of materials that show great potential in many biomedical applications including biosensing, regenerative medicine, tissue engineering, drug delivery and wound healing. In this work, we review recent advances in electrospun nanofibers for wound healing. This article begins with a brief introduction on the wound, and then discusses the unique features of electrospun nanofibers critical for wound healing. It further highlights recent studies that have used electrospun nanofibers for wound healing applications and devices, including sutures, multifunctional dressings, dermal substitutes, engineered epidermis and full-thickness skin regeneration. Finally, we finish with conclusions and future perspective in this field.

Twisting electrospun nanofiber fine strips into functional sutures for sustained co-delivery of gentamicin and silver

Surgical site infections (SSIs) represent the most common nosocomial infection among surgical patients. In order to prevent SSIs in a sustained manner and lessen side effects, we developed a twisting method for generation of nanofiber-based sutures capable of simultaneous delivery of silver and gentamicin. The prepared sutures are composed of core-sheath nanofibers with gentamicin/pluronic F127 in the core and silver/PCL in the sheath produced by co-axial electrospinning. The diameters of obtained sutures range from ~80 μm to ~1.2 mm. The in vitro release profiles of silver and gentamicin exhibit an initial burst followed by a sustained release over 5 weeks. The co-encapsulated sutures were able to kill bacteria much more effectively than gentamicin or silver alone loaded nanofiber sutures, without showing obvious impact on proliferation and migration of dermal fibroblasts and keratinocytes. The gentamicin and silver co-loaded PCL nanofiber sutures may hold great potential for prevention of SSIs.

A highly bioactive bone extracellular matrix-biomimetic nanofibrous system with rapid angiogenesis promotes diabetic wound healing

BGN-containing CPB nanofibrous scaffolds with rapid angiogenesis promotes diabetic wound healing.