Metal Ions Trigger the Gelation of Cysteine-Containing Peptide-Appended Coordination Cages

We report a series of coordination cages that incorporate peptide chains at their vertices, prepared through subcomponent self-assembly. Three distinct heterochiral tripeptide subcomponents were incorporated, each exhibiting an L-D-L stereoconfiguration. Through this approach, we prepared and characterized three tetrahedral metal-peptide cages that incorporate thiol and methylthio groups. The gelation of these cages was probed through the binding of additional metal ions, with the metal-peptide cages acting as junctions, owing to the presence of sulfur atoms on the peripheral peptides. Gels were obtained with cages bearing cysteine at the C-terminus. Our strategy for developing functional metal-coordinated supramolecular gels with a modular design may result in the development of materials useful for chemical separations or drug delivery.

Experimental Correlation between Apparent pKa and Gelation Propensity in Amphiphilic Hydrogelators Derived from l-Dopa

We report the gelation propensity of three gelators derived from l-dihydroxyphenylalanine (l-Dopa), where the amino group is derivatized with three different fatty acids (lauric acid, palmitic acid, and azelaic acid). The long aliphatic side chains should introduce additional van der Waals interactions among the molecules, contributing to the self-assembly process. The hydrogels have been prepared with the pH change method, and both the hydrogels and the corresponding aerogels have been analyzed using several techniques. In any case, Lau-Dopa provides stronger hydrogels compared with the other gelators. This property may be ascribed to its tendency to efficiently form supramolecular β-sheet structures, as outlined by the ECD, IR, and SEM analyses. Moreover, the preliminary measurement of the apparent pKa displays for Lau-Dopa two plateaux, as previously observed for, one at about pH 12 and a second one at pH 7.5. Thus, its pKa results in two apparent pKa shifts of ∼8.5 and ∼4 pH units above the theoretical pKa, as a consequence of a multistep self-assembly pathway that correlates, in the final β-sheet-based hydrogel, with a high degree of order and stability.

Short Peptide and Amino Acid-Based Supramolecular Ionogels and Eutectogels

The capability of peptide and amino acid-based molecules to act as ionogelators and eutectogelators entrapping ionic liquids (ILs) and deep eutectic solvents (DESs) forming ionogels and eutectogels has gathered attention in recent decades. The self-assembly process, primarily driven by non-covalent interactions as hydrogen bonding, remains serendipitous in nature. This review provides a comprehensive and detailed report on self-assembly of unmodified and modified amino acids and peptides in the non-conventional solvents, ILs and DESs. Understanding these processes holds great promise for the development of innovative soft-materials, and to the progress of supramolecular systems in non-conventional solvent environments.

Divergent self-assembly propensity of enantiomeric phenylalanine amphiphiles that undergo pH-induced nanofiber-to-nanoglobule conversion

This study presents the pathway diversity in the self-assembly of enantiomeric single phenylalanine derived amphiphiles (single F-PDAs), viz.L-NapF-EDA and D-NapF-EDA, that form supramolecular hydrogels at varied concentrations (≥1 mg mL-1 and ≥3 mg mL-1, respectively). By fitting the variable temperature circular dichroism (VT-CD) data to the isodesmic model, various thermodynamic parameters associated with their self-assembly, such as association constant (K), changes in enthalpy (ΔH), entropy (ΔS), and Gibbs free energy (ΔG), were extracted. The self-assembly of these single F-PDAs was found to be enthalpy-driven but entropically-disfavored. Although self-assembly of the D-isomer was slow, it also exhibited greater free energy of association than the L-isomer. Consequently, thermally and mechanically more robust self-assemblies were formed by the D-isomer than the L-isomer. We term these results as the "butterfly effect in self-assembly" wherein the difference in the stereochemical orientation of the residues at a single chiral center present in these molecules resulted in strong differences in the self-assembly propensity as well as in their thermal and mechanical stability. These single F-PDAs form helical nanofibers of opposite chirality upon self-assembly at basic pH (≥8) that produce intense CD signals. However, upon decreasing the pH, a gradual nanofiber-to-nanoglobular transformation was noticed due to protonation-induced structural changes in the PDAs.

Suicide gene delivery by morphology-adaptable enantiomeric peptide assemblies for combined ovarian cancer therapy

Suicide gene therapy is a promising therapeutic model for ovarian cancer (OC), while suffering from poor gene delivery and limited therapeutic efficacy. To address this concern, here we reported the GSH-responsive morphology-transformable enantiomeric peptide assemblies as delivering vehicles for suicide genes and co-delivery of paclitaxel (PTX). Connecting a lipid-like amphiphile and a hydrophilic arginine segment through disulfide bonds led to the enantiomeric peptides. The enantiomeric peptide assemblies are able to simultaneously uptake plasmid DNA (pDNA) and PTX based on electrostatic and hydrophobic interactions. The resulting co-assemblies underwent GSH-responsive disulfide cleavage and thereby promoting their assembly from nanoparticles to nanofibers, leading to the co-release of pDNA and PTX. Cellular and animal studies confirmed the co-delivery of pDNA and PTX into OC cells and the cell apoptosis by the enantiomeric peptides. In addition, in vitro and in vivo experiments supported the advanced uptake and cytotoxicity for L-type peptide vehicles by OC cells, and their great potential for OC-imaging, growth-inhibition and apoptosis-induction compared to D-counterpart. Our results demonstrate that the GSH-responsive morphology-transformable chiral peptide assemblies accurately and simultaneously release suicide genes and chemodrugs at tumor sites, thus providing a new strategy for the development of delivering vehicles for suicide gene and establishment of new therapeutic models for ovarian cancer. STATEMENT OF SIGNIFICANCE: Appropriate delivery carriers are essential for the clinical translation of cancer gene therapy, including the emerging suicide gene therapy. By combining the advantages of morphological transformable vehicles with the chirality peptides towards their bioactivity, we developed the GSH-responsive morphology-transformable enantiomeric peptide assemblies as delivering vehicles for suicide genes and co-delivery of paclitaxel. The GSH-responsive assembly of the enantiomeric peptides allows for precise release of plasmid DNA and paclitaxel in cancer cells, and promotes the formation of nanofibrils that facilitate gene entering nuclei for transfection. The enantiomeric peptide-based vehicles show the chirality-dependent capability for inducing cell apoptosis and inhibiting tumor growth. Our findings demonstrate a new strategy for developing therapeutic models for ovarian cancer.

Assembly-driven protection from hydrolysis as key selective force during chemical evolution

The origins of biopolymers pose fascinating questions in prebiotic chemistry. The marvelous assembly proficiencies of biopolymers suggest they are winners of a competitive evolutionary process. Sophisticated molecular assembly is ubiquitous in life where it is often emergent upon polymerization. We focus on the influence of molecular assembly on hydrolysis rates in aqueous media and suggest that assembly was crucial for biopolymer selection. In this model, incremental enrichment of some molecular species during chemical evolution was partially driven by the interplay of kinetics of synthesis and hydrolysis. We document a general attenuation of hydrolysis by assembly (i.e., recalcitrance) for all universal biopolymers and highlight the likely role of assembly in the survival of the 'fittest' molecules during chemical evolution.

Morphological Evaluation of Supramolecular Soft Materials Obtained through Co-Assembly Processes

Low-molecular-weight gelators (LMWGs) are compounds with an intrinsic tendency to self-assemble forming various supramolecular architectures via non-covalent interactions. Considering that the development of supramolecular assemblies through the synergy of molecules is not entirely understood at the molecular level, this study introduced a Fmoc-short peptide and four Fmoc-amino acids as building blocks for the self-assembly/co-assembly process. Hence, we investigated the formation of supramolecular gels starting from the molecular aggregation following two triggering approaches: solvent/co-solvent method and pH switch. The complex morphological analysis (POM, AFM, and STEM) offered an insight into the spontaneous formation of well-ordered nanoaggregates. Briefly, POM and AFM images demonstrated that self-assembled gels present various morphologies like dendrimer, spherulite, and vesicle, whereas all co-assembled supramolecular systems exhibit fibrillar morphologies as a result of the interaction between co-partners of each system. STEM study has confirmed that the molecules interact and join together, finally forming a fibrous network, an aspect seen in both self-assembled and co-assembled gels. XRD allowed the determination of the molecular arrangement. The study emphasized that the Fmoc motif protected the amino groups and facilitated gelation through additional π-π interactions.

Short Peptides for Hydrolase Supramolecular Mimicry and Their Potential Applications

Hydrolases are enzymes that have found numerous applications in various industrial sectors spanning from pharmaceuticals to foodstuff and beverages, consumers' products such as detergents and personal care, textiles, and even for biodiesel production and environmental bioremediation. Self-assembling and gelling short peptides have been designed for their mimicry so that their supramolecular organization leads to the creation of hydrophobic pockets for catalysis to occur. Catalytic gels of this kind can also find numerous industrial applications to address important global challenges of our time. This concise review focuses on the last 5 years of progress in this fast-paced, popular field of research with an eye towards the future.

Atomic Insight on Inhibition of Fibrillization of Dipeptides by Replacement of Phenylalanine with Tryptophan

Tryptophan (Trp) conjugates destabilize amyloid fibrils responsible for amyloidoses. However, the mechanism of such destabilization is obscure. Herein the self-assembly of four synthesized Trp-containing dipeptides Boc-xxx-Trp-OMe (xxx: Val, Leu, Ile, and Phe) has been investigated and compared with the existing report on their Phe congeners. Two among them are the C-terminal tryptophan analogs of Boc-Val-Phe-OMe (VF, Aβ_18-19) and Boc-Phe-Phe-OMe (FF, Aβ_19-20), part of the central hydrophobic region of amyloid-β (Aβ_1-42). While Boc-Val-Trp-OMe (VW), Boc-Leu-Trp-OMe (LW), Boc-Ile-Trp-OMe (IW), and Boc-Phe-Trp-OMe (FW) displayed a spherical morphology in FESEM and AFM images, the corresponding phenylalanine-containing dipeptides displayed various fibrous structures. Single-crystal X-ray diffraction (SC-XRD) indicated that peptides VW and IW exhibited structures containing parallel β-sheet, cross-β-structure, sheet-like layer structure, and helical arrangement in the solid state. Interestingly, peptide FW displayed inverse γ-turn conformation (similar to open-turn structure), antiparallel β-sheet structure, columnar structure, supramolecular nanozipper structure, sheet-like layer arrangement, and helical architecture in the solid state. The open-turn conformation and nanozipper structure formation by FW may be the first example of a dipeptide that forms such structures. The minute but consistent differences in molecular packing at the atomic level between Trp and Phe congeners may be responsible for their remarkably different supramolecular structure generation. This molecular-level structural analysis may be helpful for the de novo design of peptide nanostructures and therapeutics. Similar studies by the Debasish Haldar group are reported, but they investigated the inhibition of fibrillization of dipeptides by tyrosine and interactions are expectedly different.

Peptide- and Metabolite-Based Hydrogels: Minimalistic Approach for the Identification and Characterization of Gelating Building Blocks

Minimalistic peptide- and metabolite-based supramolecular hydrogels have great potential relative to traditional polymeric hydrogels in various biomedical and technological applications. Advantages such as remarkable biodegradability, high water content, favorable mechanical properties, biocompatibility, self-healing, synthetic feasibility, low cost, easy design, biological function, remarkable injectability, and multi-responsiveness to external stimuli make supramolecular hydrogels promising candidates for drug delivery, tissue engineering, tissue regeneration, and wound healing. Non-covalent interactions such as hydrogen bonding, hydrophobic interactions, electrostatic interactions, and π-π stacking interactions play key roles in the formation of peptide- and metabolite-containing low-molecular-weight hydrogels. Peptide- and metabolite-based hydrogels display shear-thinning and immediate recovery behavior due to the involvement of weak non-covalent interactions, making them supreme models for the delivery of drug molecules. In the areas of regenerative medicine, tissue engineering, pre-clinical evaluation, and numerous other biomedical applications, peptide- and metabolite-based hydrogelators with rationally designed architectures have intriguing uses. In this review, we summarize the recent advancements in the field of peptide- and metabolite-based hydrogels, including their modifications using a minimalistic building-blocks approach for various applications.

Nanotubes and water-channels from self-assembling dipeptides

Dipeptides are attractive building blocks for biomaterials in light of their inherent biocompatibility, biodegradability, and simplicity of preparation. Since the discovery of diphenylalanine (Phe-Phe) self-assembling ability into nanotubes, research efforts have been devoted towards the identification of other dipeptide sequences capable of forming these interesting nanomorphologies, although design rules towards nanotube formation are still elusive. In this review, we analyze the dipeptide sequences reported thus far for their ability to form nanotubes, which often feature water-filled supramolecular channels as revealed by single-crystal X-ray diffraction, as well as their properties, and their potential biological applications, which span from drug delivery and regenerative medicine, to bioelectronics and bioimaging.

Chiral-engineered supraparticles: Emerging tools for drug delivery

The handedness of chiral-engineered supraparticles (CE-SPs) influences their interactions with cells and proteins, as evidenced by the increased penetration of breast, cervical, and myeloma cell membranes by d-chirality-coordinated SPs. Quartz crystal dissipation and isothermal titration calorimetry have been used to investigate such chiral-specific interactions. d-SPs are more thermodynamically stable compared with l-SPs in terms of their adhesion. Proteases and other endogenous proteins can be shielded by the opposite chirality of d-SPs, resulting in longer half-lives. Incorporating nanosystems with d-chirality increases uptake by cancer cells and prolongs in vivo stability, demonstrating the importance of chirality in biomaterials. Thus, as we discuss here, chiral nanosystems could enhance drug delivery systems, tumor markers, and biosensors, among other biomaterial-based technologies, by allowing for better control over their features.

Exploiting Minimalistic Backbone Engineered γ-Phenylalanine for the Formation of Supramolecular Co-Polymer

Ordered supramolecular hydrogels assembled by modified aromatic amino acids often exhibit low mechanical rigidity. Aiming to stabilize the hydrogel and understand the impact of conformational freedom and hydrophobicity on the self-assembly process, we designed two building blocks based on 9-fluorenyl-methoxycarbonyl-phenylalanine (Fmoc-Phe) gelator which contain two extra methylene units in the backbone, generating Fmoc-γPhe and Fmoc-(3-hydroxy)-γPhe. Fmoc-γPhe spontaneously assembled in aqueous media forming a hydrogel with exceptional mechanical and thermal stability. Moreover, Fmoc-(3-hydroxy)-γPhe, with an extra backbone hydroxyl group decreasing its hydrophobicity while maintaining some molecular flexibility, self-assembled into a transient fibrillar hydrogel, that later formed microcrystalline aggregates through phase transition. Molecular dynamics simulations and single crystal X-ray analyses revealed the mechanism underlying the two residues' distinct self-assembly behaviors. Finally, we demonstrated Fmoc-γPhe and Fmoc-(3-OH)-γPhe co-assembly to form a supramolecular hydrogel with notable mechanical properties. We believe that the understanding of the structure-assembly relationship will enable the design of new functional amino acid-based hydrogels. This article is protected by copyright. All rights reserved.

Chirality-Dependent Copper-Diphenylalanine Assemblies with Tough Layered Structure and Enhanced Catalytic Performance

Chiral regulation to prepare functional materials has aroused considerable interest in recent years. However, little is known on the effect of chirality of ligands in the metal-organic coordination assembly process. We report the self-assembly of diphenylalanine peptide (Phe-Phe, FF), the core fragment of Aβ protein, with metal copper ion (Cu²⁺) into metal-organic assemblies with chirality-encoded structures and properties. The chirality-dependent metal-dipeptide assembles with different morphologies and supramolecular chirality were obtained by facile changing of the FF chirality. Single-crystal results indicate that (L)-FF coordinated with Cu²⁺ into a cross-chain structure with a five-coordinated style, while the racemates of (L+D)-FF with Cu²⁺ crystallized into an (L)-Cu²⁺-(D)-Cu²⁺ alternated four-coordinating structure, enabling a higher mechanical and catalytic performance. The Young's modulus of (L+D)-FF-Cu is as high as 34.36 GPa, which is 2.45 times higher than that of (L)-FF-Cu. Furthermore, both of them follow the characteristic enzyme kinetics and show higher catalytic activity than natural laccase at the same mass concentration. Specifically, the calculated catalytic efficiency (k_cat/K_M) of (L+D)-FF-Cu is 1.14 times higher than that of (L)-FF-Cu, and the (L+D)-FF-Cu shows significantly enhanced stability and reusability compared with (L)-FF-Cu. The results reveal that highly functional materials could be constructed by encoding the chirality of molecular building blocks.

Cooperative Metal Ion Coordination to the Short Self-Assembling Peptide Promotes Hydrogelation and Cellular Proliferation

Non-covalent interactions among short peptides and proteins led to their molecular self-assembly into supramolecular packaging, which provides the fundamental basis of life. These biomolecular assemblies are highly susceptible to the environmental conditions, including temperature, light, pH, and ionic concentration, thus inspiring the fabrication of a new class of stimuli-responsive biomaterials. Here, we report for the first time the cooperative effect of the divalent metal ions to promote hydrogelation in the short collagen inspired self-assembling peptide for developing advanced biomaterials. Introduction of the biologically relevant metal ions (Ca²⁺ /Mg²⁺ ) to the peptide surpasses its limitation to self-assemble into a multi-scale structure at physiological pH. In particular, in presence of metal ions, the negatively charged peptide showed a distinct shift in its equilibrium point of gelation and demonstrated conversion from sol to gel and thus enabling the scope of fabricating an advanced biomaterial for controlling cellular behaviour. Interestingly, tunable mechanical strength and improved cellular response were observed within ion-coordinated peptide hydrogels compared to the peptide gelator. Microscopic analyses, rheological assessment, and biological studies established the importance of utilizing a novel strategy by simply using metal ions to modulate the physical and biological attributes of CIPs to construct next-generation biomaterials. This article is protected by copyright. All rights reserved.

Polymer Conjugates of Antimicrobial Peptides (AMPs) with d-Amino Acids (d-aa): State of the Art and Future Opportunities

In recent years, antimicrobial peptides (AMPs) have enjoyed a renaissance, as the world is currently facing an emergency in terms of severe infections that evade antibiotics’ treatment. This is due to the increasing emergence and spread of resistance mechanisms. Covalent conjugation with polymers is an interesting strategy to modulate the pharmacokinetic profile of AMPs and enhance their biocompatibility profile. It can also be an effective approach to develop active coatings for medical implants and devices, and to avoid biofilm formation on their surface. In this concise review, we focus on the last 5 years’ progress in this area, pertaining in particular to AMPs that contain d-amino acids, as well as their role, and the advantages that may arise from their introduction into AMPs.

Hierarchical self-assembly of aromatic peptide conjugates into supramolecular polymers: it takes two to tango

Supramolecular polymers are self-assembled materials displaying adaptive and responsive "life-like" behaviour which are often made of aromatic compounds capable of engaging in π-π interactions to form larger assemblies. Major advances have been made recently in controlling their mode of self-assembly, from thermodynamically-controlled isodesmic to kinetically-controlled living polymerization. Dynamic covalent chemistry has been recently implemented to generate dynamic covalent polymers which can be seen as dynamic analogues of biomacromolecules. On the other hand, peptides are readily-available and structurally-rich building blocks that can lead to secondary structures or specific functions. In this context, the past decade has seen intense research activity in studying the behaviour of aromatic-peptide conjugates through supramolecular and/or dynamic covalent chemistries. Herein, we review those impressive key achievements showcasing how aromatic- and peptide-based self-assemblies can be combined using dynamic covalent and/or supramolecular chemistry, and what it brings in terms of the structure, self-assembly pathways, and function of supramolecular and dynamic covalent polymers.

Versatility in Self-assembly and Morphology of Non-Coded Anthranilic acid and Phenylglycine based Dipeptide Stereoisomers

Beauty in the self-assembly patterns of isomeric dipeptides of Boc-Ant-L-Phg-OMe (1) bearing two rigid, unnatural amino acids (Ant: Anthranilic acid, Phg: Phenylglycine) is demonstrated. Additionally, self-assembly and morphological variation by...

Facile Construction of Bio-Based Supramolecular Hydrogels from Dehydroabietic Acid with a Tricyclic Hydrophenanthrene Skeleton and Stabilized Gel Emulsions

Supramolecular hydrogels have attracted great attention due to their special properties. In this research, bio-based supramolecular hydrogels were conveniently constructed by heating and ultrasounding two components of dehydroabietic acid with a rigid tricyclic hydrophenanthrene skeleton and morpholine. The microstructures and properties of hydrogels were investigated by DSC, rheology, SAXS, CD spectroscopy, and cryo-TEM, respectively. The critical gel concentration (CGC) of the hydrogel was 0.3 mol·L⁻¹ and the gel temperature was 115 °C. In addition, the hydrogel showed good stability and mechanical properties according to rheology results. Cryo-TEM images reveal that the microstructure of hydrogel is fibrous meshes; its corresponding mechanism has been studied using FT-IR spectra. Additionally, oil-in-water gel emulsions were prepared by the hydrogel at a concentration above its CGC, and the oil mass fraction of the oil-in-water gel emulsions could be freely adjusted between 5% and 70%. This work provides a convenient way to prepare bio-based supramolecular hydrogels and provides a new method for the application of rosin.

Amyloids as Building Blocks for Macroscopic Functional Materials: Designs, Applications and Challenges

Amyloids are self-assembled protein aggregates that take cross-β fibrillar morphology. Although some amyloid proteins are best known for their association with Alzheimer’s and Parkinson’s disease, many other amyloids are found across diverse organisms, from bacteria to humans, and they play vital functional roles. The rigidity, chemical stability, high aspect ratio, and sequence programmability of amyloid fibrils have made them attractive candidates for functional materials with applications in environmental sciences, material engineering, and translational medicines. This review focuses on recent advances in fabricating various types of macroscopic functional amyloid materials. We discuss different design strategies for the fabrication of amyloid hydrogels, high-strength materials, composite materials, responsive materials, extracellular matrix mimics, conductive materials, and catalytic materials.

Assembly of cationic and amphiphilic β-sheet FKF tripeptide confers antibacterial activity

The race drawn against bacteria facing the evolution of antimicrobial resistance fuels research for new drugs and therapeutic strategies. FKF, a tripeptide that is cationic and amphiphilic was examined in light of its potential antimicrobial activity. Acid titration of purified peptide solution, 6% w/v (136 mM), yielded a hydrogel at pH~ 4. Cryo-TEM images of FKF revealed distinct phases formed upon increase in pH, ranging from elongated needles, uniform width fibers, sheets and tubular structures. ¹H NMR attested FKF charged states as function of pH, and CD and FTIR measurements indicated that FKF β-sheet assemblies are held by both π-π stacking and H-bonds. FKF hydrogel displayed bactericidal activity against E. coli and P. aeruginosa with a 3-log reduction in bacterial counts. The hydrogel was also found effective in reducing P. aeruginosa contamination in a skin lesion model in rats. FKF forms a unique antimicrobial peptide-hydrogel, showing neglectable effect in dissolved state, yet only when fibrillary assembled it gains functionality. STATEMENT OF SIGNIFICANCE: Ultra-short peptides are at the frontier of peptide self-assembly research. The tripeptide FKF assumes distinct assembly forms that are a function of pH, for which we have pinpointed the accompanying changes in charge. Made of natural amino acids, FKF forms a pure peptide hydrogel phase, which is intrinsically antimicrobial. We demonstrate that antimicrobial effect is only assumed by the peptide assemblies, posing self-assembly as a pre-requisite for FKF's bactericidal effect. This system provides evidence for the link between specific microscopic peptide assembled structures, macroscopic gel formation and antimicrobial effect, utilized to alleviate bacterial contamination in vivo.

Antimicrobial d-Peptide Hydrogels

Biofilms are widely involved in human lives, such as in medical infection, environmental remediation, and industrial processes. However, the control of the biofilm has still been a challenge because of its strong drug resistance. Here, we designed and synthesized an amphipathic antimicrobial peptide (Ac-^DK^DH^DH^DQ^DK^DL^DV^DF^DF^DA^DK-NH₂ (KKd-11)) that was composed of d-amino acids (DAAs). KKd-11 was found to self-assemble into a hydrogel with an improved long-term antimicrobial ability and a better antiprotease activity as compared to the hydrogel formed by Ac-^LK^LH^LH^LQ^LK^LL^LV^LF^LF^LA^LK-NH₂ (KK-11). Our results indicated that KKd-11 was not only able to inhibit the formation of biofilms but also could effectively damage preformed mature biofilms and kill the bacteria within the biofilms. Besides, cell viability assays indicated that the KKd-11 peptide had very good biocompatibility. We think d-peptide hydrogels may have great potential in the treatment of biofilm-induced infections.

Nanoscale Assembly of Functional Peptides with Divergent Programming Elements

Self-assembling peptides are being applied both in the biomedical area and as building blocks in nanotechnology. Their applications are closely linked to their modes of self-assembly, which determine the functional nanostructures that they form. This work brings together two structural elements that direct nanoscale self-association in divergent directions: proline as a β-breaker and the β-structure-associated diphenylalanine motif, into a single tripeptide sequence. Amino acid chirality was found to resolve the tension inherent to these conflicting self-assembly instructions. Stereoconfiguration determined the ability of each of the eight possible Pro-Phe-Phe stereoisomers to self-associate into diverse nanostructures, including nanoparticles, nanotapes, or fibrils, which yielded hydrogels with gel-to-sol transition at a physiologically relevant temperature. Three single-crystal structures and all-atom molecular dynamics simulations elucidated the ability of each peptide to establish key interactions to form long-range assemblies (i,e., stacks leading to gelling fibrils), medium-range assemblies (i.e., stacks yielding nanotapes), or short-range assemblies (i.e., dimers or trimers that further associated into nanoparticles). Importantly, diphenylalanine is known to serve as a binding site for pathological amyloids, potentially allowing these heterochiral systems to influence the fibrillization of other biologically relevant peptides. To probe this hypothesis, all eight Pro-Phe-Phe stereoisomers were tested in vitro on the Alzheimer's disease-associated Aβ(1-42) peptide. Indeed, one nonfibril-forming stereoisomer effectively inhibited Aβ fibrillization through multivalent binding between diphenylalanine motifs. This work thus defined heterochirality as a useful feature to strategically develop future therapeutics to interfere with pathological processes, with the additional value of resistance to protease-mediated degradation and biocompatibility.

Self-Assembling, Ultrashort Peptide Gels as Antimicrobial Biomaterials

Supramolecular antimicrobial hydrogels based on peptides are attractive soft materials for the treatment of infections, considering their ease of preparation and benign fate in biological settings and in the environment. In particular, stimuli-responsive systems that can be assembled/disassembled ad hoc could offer the opportunity to switch on/off their bioactivity as needed. Besides, the shorter is the peptide, the lower its cost of production. However, a structure-to-function relationship is yet to be defined and reported activities are generally not yet competitive relative to traditional antibiotics. Inspiration for their design can be found in host defense peptides (HDPs), which can self-assemble to exert their function. This article reviews research developments in this emerging area, and it examines features, differences and similarities between antimicrobial and amyloid peptides to open the avenue towards the next generation of supramolecular antimicrobial peptides as innovative therapeutic materials.

Tripeptide Self-Assembly into Bioactive Hydrogels: Effects of Terminus Modification on Biocatalysis

Bioactive hydrogels based on the self-assembly of tripeptides have attracted great interest in recent years. In particular, the search is active for sequences that are able to mimic enzymes when they are self-organized in a nanostructured hydrogel, so as to provide a smart catalytic (bio)material whose activity can be switched on/off with assembly/disassembly. Within the diverse enzymes that have been targeted for mimicry, hydrolases find wide application in biomaterials, ranging from their use to convert prodrugs into active compounds to their ability to work in reverse and catalyze a plethora of reactions. We recently reported the minimalistic l-His-d-Phe-d-Phe for its ability to self-organize into thermoreversible and biocatalytic hydrogels for esterase mimicry. In this work, we analyze the effects of terminus modifications that mimic the inclusion of the tripeptide in a longer sequence. Therefore, three analogues, i.e., N-acetylated, C-amidated, or both, were synthesized, purified, characterized by several techniques, and probed for self-assembly, hydrogelation, and esterase-like biocatalysis. This work provides useful insights into how chemical modifications at the termini affect self-assembly into biocatalytic hydrogels, and these data may become useful for the future design of supramolecular catalysts for enhanced performance.

Self-Assembly of Block Heterochiral Peptides into Helical Tapes

Patterned substitution of d-amino acids into the primary sequences of self-assembling peptides influences molecular-level packing and supramolecular morphology. We report that block heterochiral analogs of the model amphipathic peptide KFE8 (Ac-FKFEFKFE-NH2), composed of two FKFE repeat motifs with opposite chirality, assemble into helical tapes with dimensions greatly exceeding those of their fibrillar homochiral counterparts. At sufficient concentrations, these tapes form hydrogels with reduced storage moduli but retain the shear-thinning behavior and consistent mechanical recovery of the homochiral analogs. Varying the identity of charged residues (FRFEFRFE and FRFDFRFD) produced similarly sized nonhelical tapes, while a peptide with nonenantiomeric l- and d-blocks (FKFEFRFD) formed helical tapes closely resembling those of the heterochiral KFE8 analogs. A proposed energy-minimized model suggests that a kink at the interface between l- and d-blocks leads to the assembly of flat monolayers with nonidentical surfaces that display alternating stacks of hydrophobic and charged groups.

Supramolecular hydrogels from unprotected dipeptides: a comparative study on stereoisomers and structural isomers

Amino acid stereoconfiguration has been shown to play a key role in the self-assembly of unprotected tripeptides into hydrogels under physiological conditions. Dramatic changes were noted for hydrophobic sequences based on the diphenylalanine motif from the formation of amorphous aggregates in the case of homochiral peptides to nanostructured and stable hydrogels in the case of heterochiral stereoisomers. Herein, we report that by further shortening the sequence to a dipeptide, the overall differences between isomers are less marked, with both homo- and hetero-chiral dipeptides forming gels, although with different stability over time. The soft materials are studied by a number of spectroscopic and microcopic techniques, and single-crystal X-ray diffraction to unveil the supramolecular interactions of these hydrogel building blocks.

Low molecular weight self-assembling peptide-based materials for cell culture, antimicrobial, anti-inflammatory, wound healing, anticancer, drug delivery, bioimaging and 3D bioprinting applications

In this review, we have focused on the design and development of low molecular weight self-assembling peptide-based materials for various applications including cell proliferation, tissue engineering, antibacterial, antifungal, anti-inflammatory, anticancer, wound healing, drug delivery, bioimaging and 3D bioprinting. The first part of the review describes about stimuli and various noncovalent interactions, which are the key components of various self-assembly processes for the construction of organized structures. Subsequently, the chemical functionalization of the peptides has been discussed, which is required for the designing of self-assembling peptide-based soft materials. Various low molecular weight self-assembling peptides have been discussed to explain the important structural features for the construction of defined functional nanostructures. Finally, we have discussed various examples of low molecular weight self-assembling peptide-based materials for cell culture, antimicrobial, anti-inflammatory, anticancer, wound healing, drug delivery, bioimaging and 3D bioprinting applications.

Peptide-Based Gel in Environmental Remediation: Removal of Toxic Organic Dyes and Hazardous Pb2+ and Cd2+ Ions from Wastewater and Oil Spill Recovery

A dipeptide-based synthetic amphiphile bearing a myristyl chain has been found to form hydrogels in the pH range 6.9-8.5 and organogels in various organic solvents including petroleum ether, diesel, kerosene, and petrol. These organogels and hydrogels have been thoroughly studied and characterized by different techniques including high-resolution transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and rheology. It has been found that the xerogel obtained from the peptide gelator can trap various toxic organic dyes from wastewater efficiently. Moreover, the hydrogel has been used to remove toxic heavy metal ions Pb²⁺ and Cd²⁺ from wastewater. Dye adsorption kinetics has been studied, and it has been fitted by using the Freundlich isotherm equation. Interestingly, the gelator amphiphilic peptide gels fuel oil, kerosene, diesel, and petrol in a biphasic mixture of salt water and oil within a few seconds. This indicates that these gels not only may find application in oil spill recovery but also can be used to remove toxic organic dyes and hazardous toxic metal ions from wastewater. Moreover, the gelator can be recycled several times without significant loss of activity, suggesting the sustainability of this new gelator. This holds future promise for environmental remediation by using peptide-based gelators.

Ultrashort Peptide Self-Assembly: Front-Runners to Transport Drug and Gene Cargos

The translational therapies to promote interaction between cell and signal come with stringent eligibility criteria. The chemically defined, hierarchically organized, and simpler yet blessed with robust intermolecular association, the peptides, are privileged to make the cut-off for sensing the cell-signal for biologics delivery and tissue engineering. The signature service and insoluble network formation of the peptide self-assemblies as hydrogels have drawn a spell of research activity among the scientists all around the globe in the past decades. The therapeutic peptide market players are anticipating promising growth opportunities due to the ample technological advancements in this field. The presence of the other organic moieties, enzyme substrates and well-established protecting groups like Fmoc and Boc etc., bring the best of both worlds. Since the large sequences of peptides severely limit the purification and their isolation, this article reviews the account of last 5 years' efforts on novel approaches for formulation and development of single molecule amino acids, ultra-short peptide self-assemblies (di- and tri- peptides only) and their derivatives as drug/gene carriers and tissue-engineering systems.

Self-Assembly of Aromatic Amino Acid Enantiomers into Supramolecular Materials of High Rigidity

Most natural biomolecules may exist in either of two enantiomeric forms. Although in nature, amino acid biopolymers are characterized by l-type homochirality, incorporation of d-amino acids in the design of self-assembling peptide motifs has been shown to significantly alter enzyme stability, conformation, self-assembly behavior, cytotoxicity, and even therapeutic activity. However, while functional metabolite assemblies are ubiquitous throughout nature and play numerous important roles including physiological, structural, or catalytic functions, the effect of chirality on the self-assembly nature and function of single amino acids is not yet explored. Herein, we investigated the self-assembly mechanism of amyloid-like structure formation by two aromatic amino acids, phenylalanine (Phe) and tryptophan (Trp), both previously found as extremely important for the nucleation and self-assembly of aggregation-prone peptide regions into functional structures. Employing d-enantiomers, we demonstrate the critical role that amino acid chirality plays in their self-assembly process. The kinetics and morphology of pure enantiomers is completely altered upon their coassembly, allowing to fabricate different nanostructures that are mechanically more robust. Using diverse experimental techniques, we reveal the different molecular arrangement and self-assembly mechanism of the dl-racemic mixtures that resulted in the formation of advanced supramolecular materials. This study provides a simple yet sophisticated engineering model for the fabrication of attractive materials with bionanotechnological applications.

A review on recent advances in polymer and peptide hydrogels

In this review, we focus on the very recent developments on the use of the stimuli responsive properties of polymer hydrogels for targeted drug delivery, tissue engineering, and biosensing utilizing their different optoelectronic properties. Besides, the stimuli-responsive hydrogels, the conducting polymer hydrogels are discussed, with specific attention to the energy generation and storage behavior of the xerogel derived from the hydrogel. The electronic and ionic conducting gels have been discussed that have applications in various electronic devices, e.g., organic field effect transistors, soft robotics, ionic skins, and sensors. The properties of polymer hybrid gels containing carbon nanomaterials have been exemplified here giving attention to applications in supercapacitors, dye sensitized solar cells, photocurrent switching, etc. Recent trends in the properties and applications of some natural polymer gels to produce thermal and acoustic insulating materials, drug delivery vehicles, self-healing material, tissue engineering, etc., are discussed. Besides the polymer gels, peptide gels of different dipeptides, tripeptides, oligopeptides, polypeptides, cyclic peptides, etc., are discussed, giving attention mainly to biosensing, bioimaging, and drug delivery applications. The properties of peptide-based hybrid hydrogels with polymers, nanoparticles, nucleotides, fullerene, etc., are discussed, giving specific attention to drug delivery, cell culture, bio-sensing, and bioimaging properties. Thus, the present review delineates, in short, the preparation, properties, and applications of different polymer and peptide hydrogels prepared in the past few years.

Design, characterization, and evaluation of antibacterial gels, Boc-D-Phe-γ4-L-Phe-PEA/chitosan and Boc-L-Phe-γ4-L-Phe-PEA/chitosan, for biomaterial-related infections

Self-assembled peptide gels have generated interest as antibacterial materials to prevent biomaterial-related infections but these peptides are often associated with poor proteolytic stability. Efforts have been made to stabilize peptides by incorporating non-natural amino acids and/or linkages but complexation with polymers have not been explored. Therefore, we developed self-assembled peptide/chitosan gels, Boc-D-Phe-γ⁴-L-Phe-PEA (NH007)/chitosan and Boc-L-Phe-γ⁴-L-Phe-PEA (NH009)/chitosan, by complexing dipeptide NH007 or NH009 with chitosan in DMSO:acetic acid. The gels were characterized using SEM, FTIR, contact angle, and rheology data and found to exhibit excellent viscoelastic and self-healing characteristics. Complexation with chitosan led to an increase in stability against proteolytic degradation. Peptide/chitosan gels showed broad spectrum antibacterial activities against Gram-negative and Gram-positive bacteria, such as Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Bacillus subtilis at a high inoculum of 10⁷-10⁸ cfu/mL. NH007/chitosan gels showed 70-75% inhibition, whereas NH009/chitosan showed 78-81% inhibition and NH009/chitosan gels, in particular, showed strong antibacterial activity against pathogenic strain of P. aeruginosa. A unique feature of these gels is that the antibacterial activities did not decrease gradually but were sustained for up to 48 h. The mechanistic studies using SEM and HR-TEM indicated interaction of gels with bacterial membrane components, leading to cell lysis. The MTT and LDH assays indicated >90% cell viability and only 8-10% toxicity towards NIH 3T3 fibroblast cells. Thus, peptide/chitosan gels developed in the present work showed improved proteolytic stability and sustained antibacterial activities and, therefore, may be used for preventing biomaterial-related infections.

pH-Responsive Biocompatible Supramolecular Peptide Hydrogel

Peptide-based hydrogels are highly promising for various biomedical applications owing to their precise self-assembly, biocompatibility, and sensitivity toward biologically relevant external stimuli. Herein, we report pH-responsive self-assembly and gelation of a highly biocompatible amphiphilic peptide PEP-1. This is an octa-peptide and double mutant of a naturally occurring β-strand peptide fragment of the protein Galectin-1, available in bovine spleen. PEP-1 was synthesized by using the Rink amide resin as the solid support in a homemade apparatus. At pH 7.4, it exhibits spontaneous gelation with very high yield stress of 88.0 Pa and gel-to-sol temperature of 84 °C at C = 2.0 wt %. Microscopy studies revealed entangled fibrillar morphology whereas circular dichroism, Fourier tranform IR, and Thioflavin T assay indicated formation of β-sheet rich secondary structure. The assembled state was found to be stable in neutral pH whereas either decrease or increase in the pH resulted in disassembly owing to the presence of the pH responsive Asp and Lys residues. The gel network showed ability to entrap water-soluble guest molecules such as Calcein which could be selectively released at acidic pH whereas under neutral condition the release was negligible. MTT assay revealed remarkable biocompatibility of the PEP-1 gel as almost 100% cells were alive after 48 h incubation in the presence of PEP-1 (2.0 mg/mL).

Unraveling the Design Rules in Ultrashort Amyloid-Based Peptide Assemblies toward Shape-Controlled Synthesis of Gold Nanoparticles

The fundamental understanding of the detailed relationship between molecular structure and material function remains a challenging task, until now. In order to understand the relative contribution of aromatic moieties and hydrophobicity of amino acid chains, we designed a library of ultrashort amyloid-like peptides based on Ar-Phe-X (where "Ar" represents different aromatic moieties and "X" represents amino acids having varied side-chain functionalities). Our research clearly indicated that the alteration in the size and hydrophobicity of the aromatic capping play a crucial role compared to the subtle change in the amino acid sequence of the dipeptide in dictating the final self-assembled structure and properties of these short peptide amphiphiles. Further, we explored our detailed understanding toward the controlled synthesis of bioinspired organic-inorganic hybrids. For the first time, we established the differential role of aliphatic and aromatic hydroxyl moieties toward the in situ shape-controlled synthesis of gold nanoparticles in three-dimensional nanostructures of hydrogels. To the best of our knowledge, it is the first report which demonstrated the formation of rectangular platonic gold nanoparticles using simple dipeptide hydrogels, exhibiting pH-dependent size control. Our study shows promising implications in bottom-up nanofabrication of next-generation nanomaterials with emergent properties.

Amino acid conformations control the morphological and chiral features of the self-assembled peptide nanostructures: Young investigators perspective

HYPOTHESIS

A variety of nanostructures with different chiral features can be self-assembled from short peptides with highly similar sequences. We hypothesize that these supramolecular nanostructures are ruled by the constituent amino acid residues which adopt their conformations under the influence of intra-/inter-molecular interactions during peptide self-assembly.

APPROACH

Through reviewing recent advances in the self-assembly of short peptides and focusing on the relationship between amino acid conformations, peptide secondary structures and intra-/inter-molecular interactions within the supramolecular architectures, we aim to rationalize the complex interactive processes involved in the self-assembly of short, designed peptides.

RESULTS

Given the highly complexing interactive processes, the adoption of amino acid conformations and their control over peptide self-assembly consist of 4 main steps: (1) Each amino acid residue adopts its unique conformation in a specific sequence; (2) The sequence exhibits its own main chain geometry and determines the propensity of the intermolecular alignment within the building block; (3) The structural propensity of the building block and the packing mode between them determine the self-assembled structural features such as twisting, growth and chirality; (4) In addition to intra-/inter-molecular interactions, inter-sheet and inter-building block interactions could also affect the residue conformations and nanostructures, causing structural readjustment.

Controlled mechanical properties and supramolecular chirality of hydrogels via pH change

In order to widen the use of soft materials in tissue engineering and life sciences, hydrogels with improved mechanical properties and controlled chirality are critical to achieve. A methodology is presented to enhance the mechanical properties and gain the control of chirality of two component hydrogels by merely varying the solution pH. pH change has been used as a way to ionize the specific functionalities into positive and negative charges. These positive and negative charges are crucial to provide a surge of electrostatic interactions to the components, imparting the improvement in stability and regulating their optical activity. Our goal is to throw light on the significance of opposite charges in the hydrogels for achievement of desired properties. •Role of ionisable groups is crucial to control viscoelastic and optical properties of supramolecular hydrogels.•Increasing the pH of the solution increases the number of negative ions by affecting the ionisable moieties, which interact with the positive charges in the solution.•Zeta potential of both materials has been analysed to ensure the presence of charged species.

Supramolecular Tripeptide Hydrogel Assembly with 5-Fluorouracil

In this work, we present Thioflavin T fluorescence, transmission electron microscopy (TEM), circular dichroism (CD), Fourier-transformed infrared (FT-IR), and oscillatory rheometry studies applied to an antineoplastic drug, 5-fluorouracil (5-FU), embedded in a heterochiral tripeptide hydrogel to obtain a drug delivery supramolecular system. The release of 5-fluorouracil was monitored over time by reverse-phase high-performance liquid chromatography (HPLC) and its interaction with the tripeptide assemblies was probed by all-atom molecular dynamics simulations.

A “center-determination” phenomenon of C13H27CO-Gly-Ala-Ala lipotripetides: relationship between the molecular chirality and handedness of organic self-assemblies

The chirality of the central alanine residue dominates the handedness of molecular packing and that of organic self-assemblies.

1st Symposium on Polydopamine and NanoTech Poland 2018: Conference Report

The NanoTech Poland is an annual international conference with a strong scientific agenda focused on nanotechnology in energy, environment, and biomedicine. The Nanotech Poland 2018 was held at the NanoBioMedical Centre and Department of Physics at Adam Mickiewicz University in Poznań from June 6th to June 9th. The aim of NanoTech Poland 2018 was to bring together the scientific community's principal investigators, scientists, researchers, analysts, clinicians, policy makers, industry experts, and well-established and budding entrepreneurs to discuss the present and future perspectives in nanotechnology and nanoscience research and development. This year, the 1st Symposium on Polydopamine was held on June 6th. This forum was dedicated to the application of polydopamine and related catechol materials in a variety of research fields, both at the nano- and macroscale. The symposium gathered leading scientists from this important research field from top universities and institutions that have been involved in the research revolved around polydopamine. With over 200 national and international participants, NanoTech Poland 2018 and the 1st Symposium on Polydopamine provided a forum to present and discuss the latest scientific news from the field of nanotechnology with a strong interdisciplinary aspect and bioinspired materials.