Impact of Annealing Chemistry on the Properties and Performance of Microporous Annealed Particle Hydrogels

Microporous annealed particle (MAP) hydrogels are a promising class of in situ-forming scaffolds for tissue repair and regeneration. While an expansive toolkit of annealing chemistries has been described, the effects of different annealing chemistries on MAP hydrogel properties and performance have not been studied. In this study, we address this gap through a controlled head-to-head comparison of poly(ethylene glycol) (PEG)-based MAP hydrogels that were annealed using tetrazine-norbornene and thiol-norbornene click chemistry. Characterization of material properties revealed that tetrazine click annealing significantly increases MAP hydrogel shear storage modulus and results in slower in vitro degradation kinetics when microgels with a higher cross-link density are used. However, these effects are muted when the MAP hydrogels are fabricated from microgels with a lower cross-link density. In contrast, in vivo testing in murine critical-sized calvarial defects revealed that these differences in physicochemical properties do not translate to differences in bone volume or calvarial defect healing when growth-factor-loaded MAP hydrogel scaffolds are implanted into mouse calvarial defects. Nonetheless, the impact of tetrazine click annealing could be important in other applications and should be investigated further.

The Auxiliary Role of Heparin in Bone Regeneration and its Application in Bone Substitute Materials

Bone regeneration in large segmental defects depends on the action of osteoblasts and the ingrowth of new blood vessels. Therefore, it is important to promote the release of osteogenic/angiogenic growth factors. Since the discovery of heparin, its anticoagulant, anti-inflammatory, and anticancer functions have been extensively studied for over a century. Although the application of heparin is widely used in the orthopedic field, its auxiliary effect on bone regeneration is yet to be unveiled. Specifically, approximately one-third of the transforming growth factor (TGF) superfamily is bound to heparin and heparan sulfate, among which TGF-β1, TGF-β2, and bone morphogenetic protein (BMP) are the most common growth factors used. In addition, heparin can also improve the delivery and retention of BMP-2 in vivo promoting the healing of large bone defects at hyper physiological doses. In blood vessel formation, heparin still plays an integral part of fracture healing by cooperating with the platelet-derived growth factor (PDGF). Importantly, since heparin binds to growth factors and release components in nanomaterials, it can significantly facilitate the controlled release and retention of growth factors [such as fibroblast growth factor (FGF), BMP, and PDGF] in vivo. Consequently, the knowledge of scaffolds or delivery systems composed of heparin and different biomaterials (including organic, inorganic, metal, and natural polymers) is vital for material-guided bone regeneration research. This study systematically reviews the structural properties and auxiliary functions of heparin, with an emphasis on bone regeneration and its application in biomaterials under physiological conditions.

Immobilization of Growth Factors for Cell Therapy Manufacturing

Cell therapy products exhibit great therapeutic potential but come with a deterring price tag partly caused by their costly manufacturing processes. The development of strategies that lead to cost-effective cell production is key to expand the reach of cell therapies. Growth factors are critical culture media components required for the maintenance and differentiation of cells in culture and are widely employed in cell therapy manufacturing. However, they are expensive, and their common use in soluble form is often associated with decreased stability and bioactivity. Immobilization has emerged as a possible strategy to optimize growth factor use in cell culture. To date, several immobilization techniques have been reported for attaching growth factors onto a variety of biomaterials, but these have been focused on tissue engineering. This review briefly summarizes the current landscape of cell therapy manufacturing, before describing the types of chemistry that can be used to immobilize growth factors for cell culture. Emphasis is placed to identify strategies that could reduce growth factor usage and enhance bioactivity. Finally, we describe a case study for stem cell factor.

Poly(lactide-co-glycolide) grafted hyaluronic acid-based electrospun fibrous hemostatic fragments as a sustainable anti-infection and immunoregulation material

Poly(lactide-co-glycolide) (PLGA) copolymers are promising synthetic materials in the biomedical field. However, in wound management, their hydrophobic properties limit their further application because of their poor adhesion to the surface of moist wounds. Furthermore, the lack of hemostatic materials with sustainable anti-infection and immunoregulation functions remains a highly significant clinical problem, as commercially available hemostatic products, such as Arista™, Celox™ and QuikClot™, do not have sufficient infection prevention and immunoregulation properties. Herein, we employ electrospinning, ammonia dissociation and surface grafting techniques to develop a series of PLGA-based hemostatic materials, including a PLGA electrospun fibrous membrane, PLGA-NH2 fibrous particles and PLGA-hyaluronic acid fibrous fragments (PLGA-HA FFs). Notably, we load azithromycin on the PLGA-HA FFs to endow them with anti-infection and immunoregulation properties. The hemostatic mechanism analysis demonstrates that the PLGA-HA FFs show superior hemostasis performance compared to traditional gauzes. The results show that the PLGA-HA FFs can act as a versatile platform with high encapsulation of azithromycin (83.03% ± 2.81%) and rapid hemostasis (28 ± 2 s) as well as prominent cytocompatibility towards L929 cells, RAW 264.7 cells and red blood cells. We believe that the current research proposes a possible strategy to synthesize materials that achieve not only safe and effective hemostasis, but also have anti-infection and immunoregulation properties for the development of further hemostatic products.

Controlled release of BMP-2 from titanium with electrodeposition modification enhancing critical size bone formation

In this study, a porous Ti-alloy based implant with an interconnected channel structure (MAO-CaP-BMP2) is fabricated using a method combining 3D printing, microarc oxidation (MAO) treatment, and co-precipitation of Ca,P layer with BMP-2 technique. The macroporous structure with pore size of 600 μm made by 3D printing not only enhances the ingrowth of cells but also allows the formation of blood vessels inside the implant. As a result, the new bond formation is promoted. In addition, the microporous dioxide layer formed on the implant surface by MAO provides the sites for co-precipitation of Ca,P layer with BMP-2. The microstructure allows the prolonged release of BMP-2. Our results show that a sustained release of BMP-2 over 35 days is achieved for MAO-CaP-BMP2 group longer than Ti without MAO modification group and without Ca,P electrochemical deposition group. The slow release of BMP-2 at the bone/implant interface for a long period of time leads to enhancement of the osseointegration between the implant and surrounding bones. This result indicates that MAO-CaP-BMP2 is a good candidate of growth factor carrier. Successful regeneration of bone requires the concomitant processes of osteogenesis and neovascularization. MAO-CaP-BMP2 modified Ti-alloy implant is both osteoinductive and osteoconductive which can create better osteogenesis and angiogenesis. As a result, it can enhance bone formation.

Fabrication of in vitro 3D mineralized tissue by fusion of composite spheroids incorporating biomineral-coated nanofibers and human adipose-derived stem cells

Development of a bone-like 3D microenvironment with stem cells has always been intriguing in bone tissue engineering. In this study, we fabricated composite spheroids by combining functionalized fibers and human adipose-derived stem cells (hADSCs), which were fused to form a 3D mineralized tissue construct. We prepared fragmented poly (ι-lactic acid) (PLLA) fibers approximately 100 μm long by partial aminolysis of electrospun fibrous mesh. PLLA fibers were then biomineralized with various concentrations of NaHCO₃ (0.005, 0.01, and 0.04 M) to form mineralized fragmented fibers (mFF1, mFF2, and mFF3, respectively). SEM analysis showed that the minerals in mFF2 and mFF3 completely covered the fiber surface, and surface chemistry analysis confirmed the presence of hydroxyapatite peaks. Additionally, mFFs formed composite spheroids with hADSCs, demonstrating that the cells were strongly attached to mFFs and homogeneously distributed throughout the spheroid. In vitro culture of spheroids in the media without osteogenic supplements showed significantly enhanced expression of osteogenic genes including Runx2 (20.83 ± 2.83 and 22.36 ± 2.18 fold increase), OPN (14.24 ± 1.71 and 15.076 ± 1.38 fold increase), and OCN (4.36 ± 0.41 and 5.63 ± 0.51 fold increase) in mFF2 and mFF3, respectively, compared to the no mineral fiber group. In addition, mineral contents were significantly increased at day 7. Blocking the biomineral-mediated signaling by PSB 603 significantly down regulated the expression of these genes in mFF3 at day 7. Finally, we fused composite spheroids to form a mineralized 3D tissue construct, which maintained the viability of cells and showed pervasively distributed minerals within the structure. Our composite spheroids could be used as an alternative platform for the development of in vitro bone models, in vivo cell carriers, and as building blocks for bioprinting 3D bone tissue.

STATEMENT OF SIGNIFICANCE

This manuscript described our recent work for the preparation of biomimeral-coated fibers that can be assembled with mesenchymal stem cells and provide bone-like environment for directed control over osteogenic differentiation. Biomineral coating onto synthetic, biodegradable single fibers was successfully carried out using multiple steps, combination of template protein coating inspired from mussel adhesion and charge-charge interactions between template proteins and mineral ions. The biomineral-coated single micro-scale fibers (1-2.5 μm in diameter) were then assembled with human adipose tissue derived stem cells (hADSCs). The assembled structure exhibited spheroidal architecture with few hundred micrometers. hADSCs within the spheroids were differentiated into osteogenic lineage in vitro and mineralized in the growth media. These spheroids were fused to form in vitro 3D mineralized tissue with larger size.

Investigation of osteogenic responses of Fe-incorporated micro/nano-hierarchical structures on titanium surfaces

Fe incorporated micro/nano topographical titanium substrates are fabricated to synergistically regulate osteogenic responses in vitro and osseointegration in vivo.

Hybrid-spheroids incorporating ECM like engineered fragmented fibers potentiate stem cell function by improved cell/cell and cell/ECM interactions

Extracellular matrix (ECM) microenvironment is critical for the viability, stemness, and differentiation of stem cells. In this study, we developed hybrid-spheroids of human turbinate mesenchymal stem cells (hTMSCs) by using extracellular matrix (ECM) mimicking fragmented fibers (FFs) for improvement of the viability and functions of hTMSCs. We prepared FFs with average size of 68.26 µm by partial aminolysis of poly L-lactide (PLLA) fibrous sheet (FS), which was coated with polydopamine for improved cell adhesion. The proliferation of hTMSCs within the hybrid-spheroids mixed with fragmented fibers was significantly increased as compared to that from the cell-only group. Cells and fragmented fibers were homogenously distributed with the presence of pore like empty spaces in the structure. LOX-1 staining revealed that the hybrid-spheroids improved the cell viability, which was potentially due to enhanced transport of oxygen through void space generated by engineered ECM. Transmission electron microscopy (TEM) analysis confirmed that cells within the hybrid-spheroid formed strong cell junctions and contacts with fragmented fibers. The expression of cell junction proteins including connexin 43 and E-cadherin was significantly upregulated in hybrid-spheroids by 16.53 ± 0.04 and 28.26 ± 0.11-fold greater than that from cell-only group. Similarly, expression of integrin α_2, α₅, and β₁ was significantly enhanced at the same group by 25.72 ± 0.13, 27.48 ± 0.49, and 592.78 ± 0.06-fold, respectively. In addition, stemness markers including Oct-4, Nanog, and Sox2 were significantly upregulated in hybrid-spheroids by 96.56 ± 0.06, 158.95 ± 0.06, and 115.46 ± 0.47-fold, respectively, relative to the cell-only group. Additionally, hTMSCs within the hybrid-spheroids showed significantly greater osteogenic differentiation under osteogenic media conditions. Taken together, our hybrid-spheroids can be an ideal approach for stem cell expansion and serve as a potential carrier for bone regeneration.

STATEMENT OF SIGNIFICANCE

Cells are spatially arranged within extracellular matrix (ECM) and cell/ECM interactions are crucial for cellular functions. Here, we developed a hybrid-spheroid system incorporating engineered ECM prepared from fragmented electrospun fibers to tune stem cell functions. Conventionally prepared cell spheroids with large diameters (>200 µm) is often prone to hypoxia. In contrast, the hybrid-spheroids significantly enhanced viability and proliferation of human turbinate mesenchymal stem cells (hTMSCs) as compared to spheroid prepared from cell only. Under these conditions, the presence of fragmented fibers also improved maintenance of stemness of hTMSCs for longer time cultured in growth media and demonstrated significantly greater osteogenic differentiation under osteogenic media conditions. Thus, the hybrid-spheroids can be used as a delivery carrier for stem cell based therapy or a 3D culture model for in vitro assay.

Self-assembly of dual drug-delivery coating for synergistic bone regeneration

Bone regeneration for the treatment of bone diseases represents a major clinical need.

Influence of strontium ions incorporated into nanosheet-pore topographical titanium substrates on osteogenic differentiation of mesenchymal stem cells in vitro and on osseointegration in vivo

Strontium ions incorporation and nanosheet-pore topography of titanium substrates synergistically improve the osteogensis of MSCs and osseointegration in vivo.