Graphite powder film-supported Cu2S counter electrodes for quantum dot-sensitized solar cells

Surface modification of CuS counter electrodes by hydrohalic acid treatment for improving interfacial charge transfer in quantum-dot-sensitized solar cells

High charge transfer resistance and low electrocatalytic activity of counter electrodes (CEs) are mainly responsible for the poor photovoltaic performance of quantum-dot-sensitized solar cells (QDSSCs). Herein, a novel strategy has been successfully introduced for the first time to improve the electrocatalytic activity and charge transfer properties of a copper sulfide (CuS) CE by modifying it with the addition of hydrohalic acids (HHA). Through the suitable surface modification of HHA-incorporated CuS CE, the charge transfer from the external circuit to the CE surface was effectively facilitated. The electrochemical analyses suggest that charge transfer resistance is sufficiently reduced at the CE/electrolyte interface by using the HHA-treated CuS CEs. This improvement is mainly attributed to the high electrocatalytic activity of the modified CEs for the reduction of the polysulfide redox couple electrolyte in QDSSCs. The device constructed with TiO₂/CdS/CdSe/ZnS photoanodes and the hydrogen-fluoride-treated CuS (HFCuS) CE exhibits a power conversion efficiency of 4.25%, which is considerably higher than that of the device with the bare CuS CE (3.11%). These findings can facilitate the fabrication of highly efficient CEs for next-generation solar cells.

Quantum dot-sensitized solar cells

A comprehensive overview of the development of quantum dot-sensitized solar cells (QDSCs) is presented.

Revealing the correlation between charge carrier recombination and extraction in an organic solar cell under varying illumination intensity

The design and fabrication of better excitonic solar cells are the need of the hour for futuristic energy solutions. This designing needs a better understanding of the charge transport properties of excitonic solar cells. One of the popular methods of understanding the charge transport properties is the analysis of the J-V characteristics of a device through theoretical simulation at varied illumination intensity. Herein, a J-V characteristic of a polymer:fullerene based bulk heterojunction (BHJ) organic solar cells (OSCs) of structure ITO/PEDOT:PSS (∼40 nm)/PTB7:PC₇₁BM (∼100 nm)/Al (∼120 nm) is analyzed using one- and two-diode models at varied illumination intensity in the range of 0.1-2.33 Sun. It was found that the double diode model is better with respect to the single diode model and can explain the J-V characteristics of the OSCs correctly. Further, the recombination mechanism is investigated thoroughly and it was observed that fill factor (FF) is in the range of 62.5%-41.4% for the corresponding values of the recombination-to-extraction ratio (θ) varying from 0.001 to 0.023. These findings are attributed to the change in charge transport mechanism from trap-assisted to bimolecular recombination with the variation of illumination intensity.

A Player Often Neglected: Electrochemical Comprehensive Analysis of Counter Electrodes for Quantum Dot Solar Cells

The role played by the counter electrode (CE) in quantum dot sensitized solar cells (QDSSCs) is crucial: it is indeed responsible for catalyzing the regeneration of the redox electrolyte after its action to take back the oxidized light harvesters to the ground state, thus keeping the device active and stable. The activity of CE is moreover directly related to the fill factor and short circuit current through the resistance of the interface electrode-electrolyte that affects the series resistance of the cell. Despite that, too few efforts have been devoted to a comprehensive analysis of this important device component. In this work we combine an extensive electrochemical characterization of the most common materials exploited as CEs in QDSSCs (namely, Pt, Au, Cu2S obtained by brass treatment, and Cu2S deposited on conducting glass via spray) with a detailed characterization of their surface composition and morphology, aimed at systematically defining the relationship between their nature and electrocatalytic activity.

Continuous Preparation of Carbon Nanotube Film and Its Applications in Fuel and Solar Cells

So far, simultaneously realizing the continuous, controllable, and scalable preparation of carbon nanotube (CNT) film has remained a big challenge. Here, we report a scalable approach to continuously prepare CNT film with good control of film size and thickness. This is achieved through the layer-by-layer condensation and deposition of a cylindrical CNT assembly that is continuously produced from a floating catalyst CVD reactor on a paper strip. The promising applications of such a film are demonstrated by directly using it as an effective protecting layer for the Pt/C catalyst in proton exchange membrane fuel cells and as an efficient counter electrode material in quantum-dot-sensitized solar cells.

Continuous Preparation of Copper/Carbon Nanotube Composite Films and Application in Solar Cells

Realizing the continuous and large scale preparation of particle/carbon nanotube (CNT) composites with enhanced functionalities, and broad applications in energy conversion, harvesting, and storage systems, remains as a big challenge. Here, we report a scalable strategy to continuously prepare particle/CNT composite films in which particles are confined by CNT films. This is achieved by the continuous condensation and deposition of a cylindrical assembly of CNTs on a paper strip and the in situ incorporation of particles during the layer-by-layer deposition process. A Cu/CNT composite film is prepared as an example; such a film exhibits very high power conversion efficiency when it is used as a counter electrode in a solar cell, compared with previous materials under otherwise identical conditions. The proposed method can be extended to other CNT-based composite films with excellent functionalities for wide applications.