A novel self-supportive thin film based on graphene oxide reinforced chitosan nano-biocomposite for thin film microextraction of fluoxetine in biological and environmental samples

In this research, for the first time, graphene oxide doped chitosan (GO/CS) nano-biocomposite (NBC) is designed and prepared as a novel self-supportive thin layer for thin film microextraction (TFME) of fluoxetine (FLX) followed by determination applying HPLC-UV-Vis. The properties of the prepared self-supportive thin film were characterized applying ATR-FTIR, FESEM, and XRD techniques. The extraction capability of GO/CS NBC toward FLX has been evaluated, and the obtained results revealed that incorporation of GO into CS has led to higher extraction efficiency in comparison to the CS thin film. After optimizing the effective factors on the extraction efficiency, the figures of merit for the developed method have been evaluated for determination of FLX in various samples. Accordingly, the method's linearity is in the range of 0.4-800 ng mL-1 (R2 = 0.996), 4-1000 ng mL-1 (R2 = 0.994), 4-1000 ng mL-1 (R2 = 0.990), and 6-1000 ng mL-1 (R2 = 0.993) for deionized water, wastewater, urine and plasma samples, respectively. The limits of detection based on 3 S/N definition was 0.1, 1, 1 and 1.6 ng mL-1 for deionized water, wastewater, urine, and plasma samples, respectively. The repeatability of the developed method has been investigated in the term of intra-day, inter-day and inter-thin film precision and RSD% values for six replicate experiments were obtained 8.6%, 8.4% and 5.7%, respectively. The accuracy of the developed method has been investigated by extraction of FLX from spiked wastewater, plasma and urine samples and the relative recoveries of 104.4%, 87.3% and 82.4% have been resulted, respectively.

The environmental sources of benzophenones: Distribution, pretreatment, analysis and removal techniques

Benzophenones (BPs) have wide practical applications in real human life due to its presence in personal care products, UV-filters, drugs, food packaging bags, etc. It enters the wastewater by daily routine activities such as showering, impacting the whole aquatic system, then posing a threat to human health. Due to this fact, the monitoring and removal of BPs in the environment is quite important. In the past decade, various novel analytical and removal techniques have been developed for the determination of BPs in environmental samples including wastewater, municipal landfill leachate, sewage sludge, and aquatic plants. This review provides a critical summary and comparison of the available cutting-edge pretreatment, determination and removal techniques of BPs in environment. It also focuses on novel materials and techniques in keeping with the concept of "green chemistry", and describes on challenges associated with the analysis of BPs, removal technologies, suggesting future development strategies.

Functionalized carbon nanotube-polyaniline composite coating for on-line microextraction on a screw coupled with high performance liquid chromatography to determine opium alkaloids

A novel and efficient on-line microextraction on a screw coupled with high-performance liquid chromatography with an ultraviolet-visible detector was developed to extract and determine trace quantities of five opium alkaloids. All detections of the analytes were achieved at 210 nm. The surface of the screw grooves was electrochemically coated with the carbon nanotubes-COOH/polyaniline composite. The surface characterization was assessed by Fourier transform infrared spectroscopy and field emission scanning electron microscopy. The prepared screw was inserted into a cartridge of a guard column, and then the constructed microextraction on a screw device was placed in the loop of a six-port HPLC injection valve. The parameters affecting the extraction efficiency of the analytes were optimized using the one variable-at-a-time method. The effective parameters for the extraction efficiency of the analytes, including sample volume, extraction time, sampling flow rate, desorption solvent type, ionic strength, and pH were investigated and optimized. Under optimal conditions, the detection limits were 3-10 μg L-1, and the linear dynamic ranges were 10-2000 μg L-1 with a coefficient of determination greater than 0.9940. The inter-day and intra-day (n = 3) relative standard deviations were less than 7% and 5%, respectively. The proposed method was simple and reproducible, with an acceptable relative recovery (90-108%) for determining opium alkaloids in water and urine samples.

Synthesis and application of new silver and sulfur decorated S-doped reduced graphene oxide in ultra-trace analysis of pesticides by ion mobility spectrometry

In this research study, a novel, facile, and affordable method is presented for the synthesis of a Ag/S/S-RGO nanocomposite. The resulting new nanocomposite was identified by FT-IR, XRD, FESEM, XPS, BET and EDX and employed as a rapid and effective adsorbent with acceptable absorption capacity for the analysis of various pesticides by dispersive solid-phase microextraction combined with ion mobility spectrometry. The main experimental parameters of the method were optimized such as the type of desorption solvent, pH of the sample solution, type of buffer, amount of the sorbent (Ag/S/S-RGO), sorption/desorption time, etc. Under the optimized conditions, linear dynamic ranges of 0.5-110.0, 1.0-110.0, and 0.8-90.0 ng mL^-1 were achieved, with limits of detection of 0.25, 0.35, and 0.25 ng mL^-1 for simazine, alachlor, and haloxyfop, respectively. The relative standard deviations (RSD%) were obtained as <5.0%. Eventually, the method was utilized for the simultaneous determination of simazine, alachlor, and haloxyfop in environmental and agricultural samples with recoveries between 95.0 and 104.6%.

Application of ZnS/S/S-RGO three-component nanocomposites in dispersive solid-phase microextraction coupled with ion mobility spectrometry for ultra-trace determination of multiclass pesticides

A fast, effective, and sensitive dispersive solid-phase microextraction method coupled with ion mobility spectrometry for the simultaneous determination of bendiocarb, butachlor, and diazinon was developed using zinc sulfide/sulfur/sulfur-doped reduced graphene oxide (ZnS/S/S-RGO) nanocomposites. ZnS/S/S-RGO three-component nanocomposites were synthesized through a single-step solvothermal procedure, and their properties were characterized by FT-IR, XRD, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), and energy-dispersive x-ray spectroscopy (EDX). The influence of different parameters was optimized on the efficiency of the extraction including the type and the volume of desorption solvent, pH, type and the volume of buffer, the amount of absorbent, sorption and  desorption times. Under the optimal conditions, linear ranges were achieved 0.8-110, 1.0-110, and 0.5-100 ng mL^-1 with detection limits of 0.32±0.01, 0.40±0.02, and 0.27±0.02 ng mL^-1 for bendiocarb, butachlor, and diazinon, respectively. The method was employed for the ultra-trace determination of the three pesticides in water, rice, and soil samples with acceptable recovery values within the range 96.6±4.8-104.4±6.4%.

An ultrasound-assisted pressure-regulated solid-phase microextraction setup for fast and sensitive analysis of volatile pollutants in contaminated soil

Release of analytes from their native matrix and diffusion into the gas phase is the rate-limiting step for the sampling of volatiles in complex solid samples. This limitation is more serious in the solvent-less and solvent-free microextraction sampling strategies. In this research, a three-stage reinforced sampling strategy including high-pressure/sonication/low-pressure was introduced for fast and efficient release of analytes in soil samples. For this purpose, a novel ultrasound-assisted pressure-regulated solid-phase microextraction (UA-PR-SPME) device was developed. It was coupled with gas chromatography-flame ionization detection (GC-FID) and carried out for the determination of benzene, toluene, ethylbenzene, and xylenes (BTEX, as the model analytes) in complex solid samples. Graphene oxide/3-aminopropyltriethoxysilane (GO-APTES) nanocomposite was synthesized and used as the SPME fiber coating. Under optimal conditions, the limits of detection (LODs) were obtained 0.1-0.4 ng/g. The calibration curves were linear over the range of 2.4-5000 ng/g. Relative standard deviations (RSDs%) were calculated 5.1-7.0% (n = 6). The developed technique was employed for the analysis of BTEX in contaminated soil samples.

Dispersive Micro-Solid Phase Extraction for Sensitive Determination of Methotrexate from Human Saliva Followed by Spectrophotometric Method

For biological assessing of hospital personnel occupationally exposed to antineoplastic drugs, highly sensitive and accurate methods are required. Methotrexate (MTX) is an anticancer agent that is widely used in a variety of human cancers. For the first time, dispersive-micro solid phase extraction (D-µ-SPE) has been applied for determination of low levels of MTX in saliva samples. The method is based on rapid extraction of MTX using graphene oxide adsorbent. The sample preparation time is decreased by the fact that the adsorbent dispersed in the sample solution and extraction equilibrium can be reached very fast. This significant feature which obtained with this method is of key interest for routine trace laboratory analysis. The influence of different variables on D-µ-SPE was investigated. Under optimum conditions, the calibration graph was linear over the range of 10-1000 ng/ml. The relative standard deviations are better than 9.0%. The proposed method was successfully applied for the determination of MTX in patient samples.

Magnetic Polyamide Nanocomposites for the Microextraction of Benzophenones from Water Samples

In this article, the influence of the monomers on the extraction efficiency and the effect of the addition of surfactants during the synthesis have also been considered. The sorption capacity of the resulting nanocomposites has been evaluated, in the dispersive micro-solid phase extraction format, by determining that of six benzophenones in water using ultra performance liquid chromatography (UPLC) combined with photodiode array detection. Under the optimum conditions, the limits of detection were in the range of 0.5–4.3 ng/mL and the repeatability, expressed as the relative standard deviation (RSD), varied between 1.5% and 5.6%. The proposed method has been applied for the analysis of real water samples, providing relative recoveries in the interval of 84–105%

A novel mixed hemimicelles dispersive micro-solid phase extraction using ionic liquid functionalized magnetic graphene oxide/polypyrrole for extraction and pre-concentration of methotrexate from urine samples followed by the spectrophotometric method

Methotrexate (MTX) is an anticancer drug that is widely used in a variety of cancers including primary central nervous system lymphoma. It is also administrated in the treatment of some autoimmune diseases. A simple, accurate, sensitive, and precise mixed hemimicelles dispersive micro-solid phase extraction was proposed for MTX quantification in human urine samples. MTX was quantified by spectrophotometer after dispersive micro-solid phase extraction using ionic liquid functionalized magnetic graphene oxide/polypyrrole. Interactions of adsorbent and MTX were modeled by molecular docking and the interaction energy was predicted to be -8.35 kcal/mol. A larger absolute value of binding energy represents larger adsorption strength, indicating that graphene oxide nanosheets could perform higher adsorption strength toward MTX. The concentrations of MTX were proportional to analytical response in amounts ranging from 10 to 1000 ng/mL with a good correlation (R² = 0.99). Inter- and intra-day precisions and accuracies were within the acceptable limit according to FDA guideline (15% for biological determination). The recoveries were ranging from 89 to 93% and the method was specific for routine analysis of MTX. This protocol was applied to the urine of two patients under MTX therapy received an intravenous administration of 1 mg/kg/dose of MTX with acute lymphoblastic leukemia. The accuracy of the method was confirmed by HPLC measurements.

Adsorption efficiency enhancing of electrospun polycaprolactone nanofibers towards acidic polar drugs through the incorporation of a composite of graphene oxide nanosheets and Al30 polyoxocations: a comparative study

The main objective of this study focuses on exploration of the feasibility of Al30 polyoxocations for preparation of a novel sorbent material for a solid-phase extraction (SPE) method by selective adsorption and extraction of a class of compounds considering the type of interactions involved in the adsorption process. Accordingly, first Al30 polyoxocations were synthesized and their composite was prepared with graphene oxide (GO) nanosheets as a suitable substrate to be introduced as a SPE sorbent material. Then, the prepared composite was incorporated into polycaprolactone (PCL) nanofibers via electrospinning to present an alternative sorbent for SPE-based on a GO/Al30 nanocomposite (GO/Al30 NC) creating no need for filtering or centrifuging steps. Intercalation of Al30 polyoxocations into the GO layers and the incorporation of GO/Al30 NC into PCL nanofibers was successfully confirmed through FE-SEM, TEM, EDX, XRD, BET, TGA, IR spectroscopy, and zeta potential determination. For investigating the types of probable interactions involved in the adsorption process of different compounds on the proposed sorbents, four statin drugs, cholesterol-lowering agents with various polarity and ionization properties, were selected as model analytes. Factors affecting the extraction efficiency of dispersive SPE and immersed SPE methods using GO/Al30 NC and GO/Al30 NC-PCL nanofibers, respectively, were investigated and optimized. Under optimal conditions, acceptable analytical figures of merit were obtained for both SPE methods. A comparison of extraction efficiencies of the target drugs by the two proposed sorbents, as well as GO nanosheets and PCL nanofibers, was accomplished to study the types of interactions as well as the adsorption mechanism. The results revealed that GO/Al30 NC, having many polar and anion exchange sites caused by Al30 polyoxocations, is a good selective sorbent for acidic polar compounds which their extraction by nonpolar sorbents is not desirable. Additionally, GO/Al30 NC-PCL nanofibers exhibited extraction capability for a wide range of compounds from acidic polar to nonpolar and nonionizable ones.

Nanomaterial-doped conducting polymers for electrochemical sensors and biosensors

This review summarizes recent advances in the development of electrochemical sensors and biosensors based on nanomaterial doped conducting polymers.

Efficient extraction method using magnetic carbon nanotubes to analyze cocaine and benzoylecgonine in breast milk by GC/MS

Aim: The increasing use of cocaine (COC) during breastfeeding has led to growing concern about exposure of infants. Therefore, to study this exposure, a new method to analyze COC and benzoylecgonine in breast milk was developed. Methodology: A new extraction method was used for the first time to analyze COC and its major metabolite, benzoylecgonine, in breast milk using magnetic carbon nanotubes partially doped with nitrogen. Results: The calibration curves were linear in the range 5.0–180.0 ng ml-1. The limit of quantification was 5.0 ng ml-1. Coefficients of variation were between 3.2 and 13.9%. Recovery was between 89.6 and 99.2%. Conclusion: The proposed method is simple, efficient and suitable to determine analytes in breast milk.

A high-performance enzyme entrapment platform facilitated by a cationic polymer for the efficient electrochemical sensing of ethanol

An efficient enzyme entrapment approach using a cationic polymer has been demonstrated for the development of a high-performance ethanol biosensor.