Intensifying Photocatalytic Baeyer-Villiger Oxidation of Ketones with the Introduction of Ru Metalloligands and Bimetallic Units in POM@MOF

The synthesis of visible light-responsive and efficient photocatalysts toward green Baeyer-Villiger oxidation organic synthesis is of extraordinary significance. In this work, we have synthesized two examples of visible light responsive crystalline polyoxometalate@metal-organic framework materials Ru-NiMo and Ru-CoMo by introducing Ru metalloligands and {CdM3O12} bimetallic units (M = Ni or Co). This is the first report of metalloligand-modified polyoxometalate@metal-organic framework materials with bimetallic nodes, and the materials form a three-dimensional framework directly through coordination bonds between {CdM3O12} bimetallic units and metalloligands. In particular, Ru-NiMo can achieve efficient photocatalytic conversion of cyclohexanone to ε-caprolactone in yields as high as 95.5% under visible light excitation in the range of λ > 400 nm, achieving a turnover number and turnover frequency of 955 and 440 h-1, respectively, which are the best known photocatalysts for Baeyer-Villiger oxidation, while apparent quantum yield measured at 485 nm is 4.4%. Moreover, Ru-NiMo exhibited excellent structural stability and recyclability, producing a 90.8% yield after five cycles of recycling.

Three-Dimensional Polyoxometalate Organic Frameworks with One-Dimensional Channels Constructed by Multiple Helical Chains Based on 22-Core Ln/Mn/Mo Clusters for Proton Conduction

Two unique 22-core sandwich {[Mn6Mo6O37]Ln3[MnMo6O24]} (Ln = La or Pr) units have been assembled, featuring an undisclosed {Mn6Mo6} cluster. This assembly is subsequently integrated into two three-dimensional polyoxometalate organic frameworks, which exhibit one-dimensional hydrophilic hexagonal channels formed by six intertwined 63 helical chains, leading to effective proton conduction primarily facilitated by an abundance of water molecules within the channels.

Eosin Y-Containing Metal-Organic Framework as a Heterogeneous Catalyst for Direct Photoactivation of Inert C-H Bonds

Xanthene dyes as a class of ideal organic homogeneous photocatalyst have received significant attention in C-H bond activation; however, the inherent nature of fast carrier recombination/deactivation and low stability limits their practical applications. Herein, by the ingenious decoration of eosin Y into a porous metal-organic framework (MOF), a high-performance heterogeneous MOF-based photocatalyst was prepared to efficiently activate inert C-H bonds on the reactants via the hydrogen atom transfer pathway for the functionalization of the C-H bonds. Taking advantage of the fixation effect of a rigid framework, the incorporation of eosin Y into MOF leads to great enhancement of their chemical durability. More importantly, by the introduction of the second auxiliary ligand, the carbonyl groups of xanthene on the eosin Y dyes were perfectly retained and periodically aligned within the confined channels of this rigid framework, which could effectively form excited state radicals to prompt inert C-H bond activation, promoting reaction efficiency by the host-guest supramolecular interaction. New eosin Y-based MOFs were recyclable for six times without reducing photocatalytic activity. This eosin Y functionalized MOF-based heterogeneous photocatalytic system provides an availably catalytic avenue to develop a scalable and sustainable synthetic strategy for the practical application of organic dyes.

Metal–organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C–H bond activation and functionalization reactions

The review summarizes the state-of-the-art of C–H active transformations over crystalline and amorphous porous materials as new emerging heterogeneous (photo)catalysts.

Direct Photocatalyzed Hydrogen Atom Transfer (HAT) for Aliphatic C-H Bonds Elaboration

Direct photocatalyzed hydrogen atom transfer (d-HAT) can be considered a method of choice for the elaboration of aliphatic C–H bonds. In this manifold, a photocatalyst (PC_HAT) exploits the energy of a photon to trigger the homolytic cleavage of such bonds in organic compounds. Selective C–H bond elaboration may be achieved by a judicious choice of the hydrogen abstractor (key parameters are the electronic character and the molecular structure), as well as reaction additives. Different are the classes of PCs_HAT available, including aromatic ketones, xanthene dyes (Eosin Y), polyoxometalates, uranyl salts, a metal-oxo porphyrin and a tris(amino)cyclopropenium radical dication. The processes (mainly C–C bond formation) are in most cases carried out under mild conditions with the help of visible light. The aim of this review is to offer a comprehensive survey of the synthetic applications of photocatalyzed d-HAT.

Optimization of a Decatungstate-Catalyzed C(sp3)-H Alkylation Using a Continuous Oscillatory Millistructured Photoreactor

Tetrabutylammonium decatungstate (TBADT) has emerged as an efficient and versatile photocatalyst for hydrogen atom transfer (HAT) processes that enables the cleavage of both activated and unactivated aliphatic C-H bonds. Using a recently developed oscillatory millistructured continuous-flow photoreactor, investigations of a decatungstate-catalyzed C(sp³)-H alkylation protocol were carried out, and the results are presented here. The performance of the reactor was evaluated in correlation to several chemical and process parameters, including residence time, light intensity, catalyst loading, and substrate/reagent concentration. In comparison with previously reported batch and flow protocols, conditions were found that led to considerably higher productivity, achieving a throughput up to 36.7 mmol/h with a residence time of only 7.5 min.

Metal–Organic Frameworks (MOFs) and Covalent Organic Frameworks (COFs) Applied to Photocatalytic Organic Transformations

Among the different alternatives for catalysis using metal–organic frameworks (MOFs) or covalent organic frameworks (COFs), photocatalysis has remarkably evolved during the last decade. Photocatalytic reticular materials allowed recyclability and easy separation of catalyst from the product, also reaching the activity and selectivity commonly observed for molecular systems. Recently, photocatalytic MOFs and COFs have been applied to synthetic applications in order to obtain organic molecules of different complexity. However, although a good number of works have been devoted to this issue, an updated comprehensive revision on this field is still needed. The aim of this review was to fill this gap covering the following three general aspects: (1) common strategies on the design of reticular photocatalytic materials, (2) a comprehensive discussion of the photocatalytic organic reactions achieved by the use of COFs and MOFs, and (3) some critical considerations highlighting directions that should be considered in order to make advances in the study of photocatalytic COFs and MOFs.

Strategies for Incorporating Catalytically Active Polyoxometalates in Metal-Organic Frameworks for Organic Transformations

Polyoxometalates (POMs) can benefit from immobilization on solid supports to overcome their difficulty in processability and stability. Among the reported solid supports, metal-organic frameworks (MOFs) offer a crystalline, versatile platform for depositing highly active POMs. The combination of these structures can at times benefit from the combined reactivity of both the POM and MOF, sometimes synergistically, to improve catalysis while balancing desirable properties like porosity, substrate diffusion, or stability. In this Review, we survey the strategies for immobilizing POMs within MOF structures, with an emphasis on how physical and catalytic properties of the parent materials are affected in the composite when employed in organic transformations.

Visible-near-infrared-responsive g-C3N4Hx+ reduced decatungstate with excellent performance for photocatalytic removal of petroleum hydrocarbon

The development of photocatalysts making full use of natural light sources is highly desired for the remediation of marine oil spill pollution, which is full of challenges. Herein, we demonstrate a well-defined visible-near-infrared-responsive g-C₃N₄H_x⁺ reduced decatungstate charge-transfer salt (RCD-CTS), which possess efficient light-absorption ability ranging from visible light to the near infrared region. The RCD-CTS photocatalyst exhibits excellent performance for photocatalytic removal of petroleum hydrocarbon. The structural characterization and theoretical calculation confirmed strong chemical interaction between components and partly reduction of decatungstate results in the plasmonic properties and the absorption of near infrared light. As a results, it is proposed that"hot electrons"transfer process generated by plasmon effect promotes the efficient separation of charge-carriers. Ultimately, this work sheds light on the discovery and application of visible-near-infrared-responsive optical materials that may be exploited further in artificial photosynthesis, solar energy conversion, and phototherapy.

Creating Chemisorption Sites for Enhanced CO2 Photoreduction Activity through Alkylamine Modification of MIL-101-Cr

The lower CO₂ utilization and poor charge conductivities have limited the application of metal-organic frameworks (MOFs) in photocatalysis. In this work, different alkylamines [ethylenediamine (EN), diethylenetriamine (DETA), and triethylenetetramine (TETA)] were successfully introduced into MIL-101-Cr by postmodification and created abundant CO₂ chemisorption sites in structures. Photocatalysis reaction showed that the alkylamine modification promoted the charge separation and migration rate and enhanced the reduction potential of the electron generated by the MOF photocatalyst. Among them, the EN-modified material exhibits the highest CO generation rate of 47.2 μmol·h^-1·g^-1 with a high selectivity of 96.5%, much superior than the pristine MOFs MIL-101-Cr and MIL-101-SO₃H, as well as the DETA- and TETA-modified products, which can be ascribed to the abundant chemisorption sites for CO₂ reactants and the optimized pore size in structures. The strategy of introduction of alkylamine groups as CO₂ chemisorption sites has been demonstrated to be a new pathway for the design of efficient MOF catalysts for CO₂ photoreduction.

Catalytic alkylation of unactivated C(sp3)–H bonds for C(sp3)–C(sp3) bond formation

This review summarizes recent advancements in catalytic direct transformation of unactivated C(sp³)–H bonds into C(sp³)–C(sp³) bonds.

Design of cost-efficient and photocatalytically active Zn-based MOFs decorated with Cu2O nanoparticles for CO2methanation

Here we show for the first time a MOF that is photocatalytically active for light-assisted CO₂methanation under mild conditions (215 °C), which can be further improved with the inclusion of metallic nanoparticles.

A Multifunctional Dual-Luminescent Polyoxometalate@Metal-Organic Framework EuW10@UiO-67 Composite as Chemical Probe and Temperature Sensor

The luminescent [EuW10O36]9- polyoxometalate has been introduced into the cavities of the highly porous zirconium luminescent metal-organic framework UiO-67 via a direct synthesis approach, affording the EuW10@UiO-67 hybrid. Using a combination of techniques (TGA, BET, elemental analysis, EDX mapping,…) this new material has been fully characterized, evidencing that it contains only 0.25% in europium and that the polyoxometalate units are located inside the octahedral cavities and not at the surface of the UiO-67 crystallites. Despite the low amount of europium, it is shown that EuW10@UiO-67 acts as a solid-state luminescent sensor for the detection of amino-acids, the growth of the emission intensity globally following the growth of the amino-acid pKa. In addition, EuW10@UiO-67 acts as a sensor for the detection of metallic cations, with a high sensitivity for Fe3+. Noticeably, the recyclability of the reported material has been established. Finally, it is shown that the dual-luminescent EuW10@UiO-67 material behave as a self-calibrated-ratiometric thermometer in the physiological range.

Rational Design of Catalytic Centers in Crystalline Frameworks

Crystalline frameworks including primarily metal organic frameworks (MOF) and covalent organic frameworks (COF) have received much attention in the field of heterogeneous catalysts recently. Beyond providing large surface area and spatial confinement, these crystalline frameworks can be designed to either directly act as or influence the catalytic sites at molecular level. This approach offers a unique advantage to gain deeper insights of structure-activity correlations in solid materials, leading to new guiding principles for rational design of advanced solid catalysts for potential important applications related to energy and fine chemical synthesis. In this review, recent key progress achieved in designing MOF- and COF-based molecular solid catalysts and the mechanistic understanding of the catalytic centers and associated reaction pathways are summarized. The state-of-the-art rational design of MOF- and COF-based solid catalysts in this review is grouped into seven different areas: (i) metalated linkers, (ii) metalated moieties anchored on linkers, (iii) organic moieties anchored on linkers, (iv) encapsulated single sites in pores, and (v) metal-mode-based active sites in MOFs. Along with this, some attention is paid to theoretical studies about the reaction mechanisms. Finally, technical challenges and possible solutions in applying these catalysts for practical applications are also presented.

Selective C(sp3 )-H Aerobic Oxidation Enabled by Decatungstate Photocatalysis in Flow

A mild and selective C(sp3 )-H aerobic oxidation enabled by decatungstate photocatalysis has been developed. The reaction can be significantly improved in a microflow reactor enabling the safe use of oxygen and enhanced irradiation of the reaction mixture. Our method allows for the oxidation of both activated and unactivated C-H bonds (30 examples). The ability to selectively oxidize natural scaffolds, such as (-)-ambroxide, pregnenolone acetate, (+)-sclareolide, and artemisinin, exemplifies the utility of this new method.

Cooperative Polar/Steric Strategy in Achieving Site-Selective Photocatalyzed C(sp3 )-H Functionalization

Synergistic control over the S_H 2 transition states of hydrogen abstraction exploiting polar and steric effects provides a promising cooperative strategy for site-selective C(sp³ )-H functionalization using decatungstate anion photocatalysis. By using this photocatalytic approach, the C-H bonds of substituted lactones and cyclic ketones were functionalized selectively. In the remarkable case of 2-isoamyl 4-tert-butyl cyclohexanone (1 t) bearing five methyl, five methylene, and three methine C-H bonds, one methine C-H bond in the isoamyl tether was selectively functionalized.

Hydrogen Atom Transfer (HAT): A Versatile Strategy for Substrate Activation in Photocatalyzed Organic Synthesis

The adoption of hydrogen atom transfer (HAT) in a photocatalytic approach, in which an excited catalyst is responsible for substrate activation, offers unique opportunities in organic synthesis, enabling the straightforward activation of R-H (R = C, Si, S) bonds in desired reagents. Either a direct strategy, based on the intrinsic reactivity of a limited number of photocatalysts in the excited state, or an indirect one, in which a photocatalytic cycle is used for the generation of a thermal hydrogen abstractor, can be exploited. This microreview summarizes the most recent advances (mainly from the last two years) in this rapidly developing area of research, collecting the selected examples according to the nature of the species promoting the HAT process. From the synthetic point of view, this area has led to the development of a plethora of strategies for C-C, C-Si, C-N, C-S, and C-halogen (particularly, fluorine) bond formation, as well as for oxidation reactions.

Photocatalytic metal–organic frameworks for organic transformations

Metal–organic frameworks (MOFs) have attracted increasing attention for applications in heterogeneous photocatalysis.

Decatungstate Anion for Photocatalyzed "Window Ledge" Reactions

The majority of organic reactions are commonly carried out inside a lab, under a fume hood. A particular case is that of photochemical reactions, a field where the pioneering experiments by Giacomo Ciamician demonstrated more than one century ago that different processes can be carried out outdoors, for example, on the balcony of his own department, upon exposure of the reacting mixtures to sunlight. The main problem related to this chemistry of the "window ledge" is that most organic compounds are colorless and their absorption in the solar light region is in most cases negligible. Recently, the impressive development in the use of visible light absorbing photocatalysts (e.g., Ru^II or Ir^III complexes, as well as organic dyes) made light-induced processes convenient even for non-photochemistry practitioners. It is thus possible to easily perform the reactions by simply placing the reaction vessel in a sunny place outside the lab. However, most of these processes are based on single electron transfer (SET) reactions (photoredox catalysis). Other photocatalysts able to activate substrates via alternative paths, such as hydrogen atom transfer (HAT), are emerging. In the last years, we were deeply involved in the use of the decatungstate anion ([W₁₀O₃₂]^4-, a polyoxometalate) in synthesis. Indeed, such a versatile species is able to promote the photocatalytic C-H activation of organic compounds via either SET or HAT reactions. Interestingly, though the absorption spectrum of [W₁₀O₃₂]^4- does not extend into the visible region, it shows an overlap with solar light emission. In this Account, we provide an overview on the application of decatungstate salts as photocatalysts in window ledge chemistry. We initially discuss the nature of the photogenerated species involved in the mechanism of action of the anion, also supported by theoretical simulations. The first-formed excited state of the decatungstate anion decays rapidly to the active species, a dark state tagged wO, featuring the presence of electron-deficient oxygen centers. Next, we describe the main applications of decatungstate chemistry. A significant part of this Account is devoted to photocatalyzed synthesis (C-X bond formation, with X = C, N, O, and oxidations) carried out by adopting sunlight (or simulated solar light). This synthetic approach is versatile, and most of the reactions involved C-H activation in cycloalkanes, alkylaromatics, amides, ethers (1,4-dioxane, oxetane, benzodioxole, and THF), aldehydes, nitriles, and cyclopentanones, and the ensuing addition of the resulting radicals onto electron-deficient olefins. Finally, the increasing role of the decatungstate anion in water depollution and polymerization is briefly discussed.

Immobilization of polyoxometalates in crystalline solids for highly efficient heterogeneous catalysis

The recently developed strategies on POM-based crystalline solids and their catalytic properties are summarized in this short review.