A highly efficient supramolecular photoswitch for singlet oxygen generation in water

Molecular folding governs switchable singlet oxygen photoproduction in porphyrin-decorated bistable rotaxanes

Rotaxanes are mechanically interlocked molecules where a ring (macrocycle) is threaded onto a linear molecule (thread). The position of the macrocycle on different stations on the thread can be controlled in response to external stimuli, making rotaxanes applicable as molecular switches. Here we show that bistable rotaxanes based on the combination of a Zn(II) tetraphenylporphyrin photosensitizer, attached to the macrocycle, and a black-hole-quencher, attached to the thread, are capable of singlet oxygen production which can be switched on/off by the addition of base/acid. However, we found that only a sufficiently long linker between both stations on the thread enabled switchability, and that the direction of switching was inversed with regard to the original design. This unexpected behavior was attributed to intramolecular folding of the rotaxanes, as indicated by extensive theoretical calculations. This evidences the importance to take into account the conformational flexibility of large molecular structures when designing functional switchable systems.

Recent Advances on Diarylethene-Based Photoswitching Materials: Applications in Bioimaging, Controlled Singlet Oxygen Generation for Photodynamic Therapy and Catalysis

Photoswitching materials have emerged as a promising class of compounds that possess manifold interesting properties rendering their widespread use from photoswitches, regulators to optoelectronic devices, security technologies and biochemical assays. Diarylethenes (DAE) constitute one such category of photoswitchable compounds, where the key features of stability, photoisomerization wavelengths, quantum yield and variability in the photoisomers significantly depend on their derivatization. The last decade has witnessed a surge in the engagement of DAEs in different areas of chemical and biological sciences, like biomarkers, controlled generation of singlet oxygen, photo-dynamic therapy, chemosensing, catalysis, etc. In all the cases, the photoswitchability of DAE is the principal regulating factor along with its emission properties according to the appended groups. Previous reviews on applications of DAE-based systems did not predominantly cover all the aspects of biological and industrial implementations. They have covered only one field of application either in the biological science or in the synthetic aspect or photochromic aspects only. This review is a coalition of all those aspects in last six years. Here the variation of properties of the DAE systems with respect to structural diversifications have been discussed in detail along with their potential applications in bioimaging of cells, regulating singlet oxygen generation for photodynamic therapy and catalysis of organic reactions, and their future prospects. A tabular presentation of the photophysical properties of DAE derivatives adds to the basic understanding of this subject at a glance. We hope that this cumulative collection of contemporary research on DAE, as presented in this review, will enhance the knowledge of the readers about synthetic design anticipating their properties well in advance, and will certainly motivate researchers to generate new DAE architectures with superior chemical and biological properties in future.

A pillar[5]arene noncovalent assembly boosts a full-color lanthanide supramolecular light switch

A photo-responsive full-color lanthanide supramolecular switch was constructed from a synthetic 2,6-pyridine dicarboxylic acid (DPA)-modified pillar[5]arene (H) complexing with lanthanide ion (Ln3+ = Tb3+ and Eu3+) and dicationic diarylethene derivative (G1) through a noncovalent supramolecular assembly. Benefiting from the strong complexation between DPA and Ln3+ with a 3 : 1 stoichiometric ratio, the supramolecular complex H/Ln3+ presented an emerging lanthanide emission in the aqueous and organic phase. Subsequently, a network supramolecular polymer was formed by H/Ln3+ further encapsulating dicationic G1via the hydrophobic cavity of pillar[5]arene, which greatly contributed to the increased emission intensity and lifetime, and also resulted in the formation of a lanthanide supramolecular light switch. Moreover, full-color luminescence, especially white light emission, was achieved in aqueous (CIE: 0.31, 0.32) and dichloromethane (CIE: 0.31, 0.33) solutions by the adjustment of different ratios of Tb3+ and Eu3+. Notably, the photo-reversible luminescence properties of the assembly were tuned via alternant UV/vis light irradiation due to the conformation-dependent photochromic energy transfer between the lanthanide and the open/closed-ring of diarylethene. Ultimately, the prepared lanthanide supramolecular switch was successfully applied to anti-counterfeiting through the use of intelligent multicolored writing inks, and presents new opportunities for the design of advanced stimuli-responsive on-demand color tuning with lanthanide luminescent materials.

All Visible Light Photoswitch Based on the Dimethyldihydropyrene Unit Operating in Aqueous Solutions with High Quantum Yields

Molecular systems and devices whose properties can be modulated using light as an external stimulus are the subject of numerous research studies in the fields of materials and life sciences. In this context, the use of photochromic compounds that reversibly switch upon light irradiation is particularly attractive. However, for many envisioned applications, and in particular for biological purposes, illumination with harmful UV light must be avoided and these photoactivable systems must operate in aqueous media. In this context, we have designed a benzo[e]-fused dimethyldihydropyrene compound bearing a methyl-pyridinium electroacceptor group that meets these requirements. This compound (closed state) is able to reversibly isomerize under aerobic conditions into its corresponding cyclophanediene form (open isomer) through the opening of its central carbon-carbon bond. Both the photo-opening and the reverse photoclosing processes are triggered by visible light illumination and proceed with high quantum yields (respectively 14.5% yield at λ = 680 nm and quantitative quantum yield at λ = 470 nm, in water). This system has been investigated by nuclear magnetic resonance and absorption spectroscopy, and the efficient photoswitching behavior was rationalized by spin-flip time-dependent density functional theory calculations. In addition, it is demonstrated that the isomerization from the open to the closed form can be electrocatalytically triggered.

Photoswitchable molecular tweezers: isomerization to control substrate binding, and what about vice versa?

The linkage of two identical binding motifs by a molecular photoswitch has proven to be a straightforward and versatile strategy to control substrate binding affinity by light. Stimulus control of binding properties in artificial receptors is partly inspired by the dynamic behavior of proteins and is highly attractive as it could, for example, improve extraction processes and allow (de)activation of membrane transport on demand. This feature article summarizes the development and design principles of molecular tweezers containing a molecular photoswitch as the core unit. Besides the control of binding affinity by isomerization, the effect of substrate binding on the isomerization behavior is discussed where data is available. While the latter often receives less attention, it could be of benefit in the future creation of multi-stimuli-controlled molecular switching and machine-like systems.

Electron‐Rich EDOT Linkers in Tetracationic bis‐Triarylborane Chromophores: Influence on Water Stability, Biomacromolecule Sensing, and Photoinduced Cytotoxicity

Three novel tetracationic bis‐triarylboranes with 3,4‐ethylenedioxythiophene (EDOT) linkers, and their neutral precursors, showed significant red‐shifted absorption and emission compared to their thiophene‐containing analogues, with one of the EDOT‐derivatives emitting in the NIR region. Only the EDOT‐linked trixylylborane tetracation was stable in aqueous solution, indicating that direct attachment of a thiophene or even 3‐methylthiophene to the boron atom is insufficient to provide hydrolytic stability in aqueous solution. Further comparative analysis of the EDOT‐linked trixylylborane tetracation and its bis‐thiophene analogue revealed efficient photo‐induced singlet oxygen production, with the consequent biological implications. Thus, both analogues bind strongly to ds‐DNA and BSA, very efficiently enter living human cells, accumulate in several different cytoplasmic organelles with no toxic effect but, under intense visible light irradiation, they exhibit almost instantaneous and very strong cytotoxic effects, presumably attributed to singlet oxygen production. Thus, both compounds are intriguing theranostic agents, whose intracellular and probably intra‐tissue location can be monitored by strong fluorescence, allowing switching on of the strong bioactivity by well‐focused visible light.

Future-Oriented Advanced Diarylethene Photoswitches: From Molecular Design to Spontaneous Assembly Systems

Diarylethene (DAE) photoswitch is a new and promising family of photochromic molecules and has shown superior performance as a smart trigger in stimulus-responsive materials. During the past few decades, the DAE family has achieved a leap from simple molecules to functional molecules and developed toward validity as a universal switching building block. In recent years, the introduction of DAE into an assembly system has been an attractive strategy that enables the photochromic behavior of the building blocks to be manifested at the level of the entire system, beyond the DAE unit itself. This assembly-based strategy will bring many unexpected results that promote the design and manufacture of a new generation of advanced materials. Here, recent advances in the design and fabrication of diarylethene as a trigger in materials science, chemistry, and biomedicine are reviewed.

Induced Near-Infrared Emission and Controlled Photooxidation based on Sulfonated Crown Ether in Water

Regulation of physio-chemical properties and reaction activities via noncovalent methodology has become one of increasingly significant topics in supramolecular chemistry and showed inventive applications in miscellaneous fields. Herein, we demonstrate that sulfonated crown ether can form very stable host-guest complexes with a series of push-pull-type photosensitizers, eventually leading to the dramatic fluorescence enhancement in visible and near-infrared regions. Meanwhile, severe suppression in singlet oxygen (¹ O₂ ) production is found, mainly due to the higher energy barriers between the excited single and triple states upon host-guest complexation. Moreover, such complexation-induced tuneable ¹ O₂ generation systems has been utilized in adjusting the photochemical oxidation reactions of polycyclic aromatic hydrocarbons (anthracene) and sulfides ((methylthio)benzene) in water. This supramolecularly controlled photooxidation based on the selective molecular binding of crown ether with photosensitizers may provide a feasible and applicable strategy for monitoring and modulating many photocatalysis processes in aqueous phase.

Achieving Enhanced Photochromic Properties of Diarylethene through Host-Guest Interaction in Aqueous Solution

Diarylethene (DTE) has been widely used in fluorescence probes, molecular logic gates, optical data-storage devices owing to the excellent photochromic property, while constructing high-performance photochromic DTE in aqueous media remains a big challenge. Herein we present several host-guest systems formed between cucurbit[n]uril (CB[n], n=7, 8, 10) and two water-soluble DTE derivatives 1 and 2. It was found that host-guest interactions not only affect the photophysical properties of photochromic guests, but also make great differences on the photoreaction process. Different host-guest binding behaviors also lead to different effects on the photochromic properties of guests. In the presence of CB[n], both 1 and 2 showed enhanced emission and higher fluorescence quenching ratio at photostationary state. Besides, CB[10]⋅1 exhibited faster response rate in cyclization reaction and better photofatigue resistance than free 1 in aqueous solution, while the supramolecular assembly of (CB[8])_n ⋅(2)_n showed slower response rate in both directions of the reversible photoreaction. Besides, the photofatigue resistance of 2 can be greatly improved through binding with CB[7]. Our results suggest that host-guest interactions could be an efficient way to improve photochromic properties of DTE in aqueous solution.

Supramolecular Control of Singlet Oxygen Generation

Singlet oxygen (¹O₂) is the excited state electronic isomer and a reactive form of molecular oxygen, which is most efficiently produced through the photosensitized excitation of ambient triplet oxygen. Photochemical singlet oxygen generation (SOG) has received tremendous attention historically, both for its practical application as well as for the fundamental aspects of its reactivity. Applications of singlet oxygen in medicine, wastewater treatment, microbial disinfection, and synthetic chemistry are the direct results of active past research into this reaction. Such advancements were achieved through design factors focused predominantly on the photosensitizer (PS), whose photoactivity is relegated to self-regulated structure and energetics in ground and excited states. However, the relatively new supramolecular approach of dictating molecular structure through non-bonding interactions has allowed photochemists to render otherwise inactive or less effective PSs as efficient ¹O₂ generators. This concise and first of its kind review aims to compile progress in SOG research achieved through supramolecular photochemistry in an effort to serve as a reference for future research in this direction. The aim of this review is to highlight the value in the supramolecular photochemistry approach to tapping the unexploited technological potential within this historic reaction.

Photolysis of the BODIPY dye activated by pillar[5]arene

Here, a pseudo[3]rotaxane comprising a fluorescent BODIPY derivative and pillar[5]arene was conveniently fabricated via host–guest complexation. Importantly, in this system, the efficient photodecomposition of the BODIPY derivative in the presence of pillar[5]arene was witnessed upon irradiation at 311 nm light, which was demonstrated via UV-Vis absorption, fluorescence emission, NMR and HR-MS spectroscopy techniques, but the only BODIPY dye in the absence of pillar[5]arene couldn't undergo photodegradation. We demonstrated that pillar[5]arene could act as an activator to trigger the photodegradation reaction of BODIPY derivatives via free radical reactions even without supramolecular interactions. The present results provide a new strategy for the efficient photolysis of organic dyes.

Here, a pseudo[3]rotaxane comprising a fluorescent BODIPY derivative and pillar[5]arene was conveniently fabricated via host–guest complexation.

Photonic Switching Porous Organic Polymers toward Reversible Control of Heterogeneous Photocatalysis

Sonogashira-Hagihara coupling reaction of photoswitchable dithienylethene (AEDTE) with metal-free 5,10,15,20-tetrakis(4-iodophenyl)porphyrin and its metal derivatives (MTIPP, M = H₂, Zn(II), Fe(II)) results in three porous organic polymers (POPs) including AEDTE-H₂TIPP-POP, AEDTE-ZnTIPP-POP, and AEDTE-FeTIPP-POP. The morphology, components, and structures of newly obtained POPs have been examined by a range of spectroscopic and microscopic techniques including infrared spectroscopy (IR), solid-state UV-vis diffuse reflectance spectroscopy, thermogravimetric analysis (TGA), powder X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The porous structures have been estimated by nitrogen and carbon dioxide sorption isotherms at 77 and 196 K, respectively. The open-AEDTE-H₂TIPP-POP with AEDTE in an open form was revealed to be an effective and stable heterogeneous photocatalyst for visible light-driven oxidation of N-methylpyridinium salts possibly because of its relatively large specific surface area. In particular, a proof-of-concept of photoswitchable POP photocatalysts has been established using different light irradiation upon open-AEDTE-H₂TIPP-POP to control its heterogeneous photocatalytic behaviors because of the adjustment over the electron transfer process and porous structures through photoisomerization of AEDTE. The present result highlights the bright perspective of photoswitching POPs in the field of materials chemistry and catalysis community.

High-Efficiency Synergistic Effect of Supramolecular Nanoparticles Based on Cyclodextrin Prodrug on Cancer Therapy

Novel cyclodextrin-prodrug supramolecular nanoparticles (NPs) with cooperative-enhancing cancer therapy were constructed from a reduction-sensitive disulfide bond-linked permethyl-β-cyclodextrin-camptothecin prodrug, water-soluble adamantane-porphyrin photosensitizer, and hyaluronic acid grafted by triphenylphosphine and β-cyclodextrin through an orthogonal host-guest recognition strategy, displaying uniform nanoparticles with a diameter around 100 nm as revealed by dynamic light scattering, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. Compared with 293T normal cells, the supramolecular NPs could be easily taken up by mitochondria of A549 cancer cells, then release the active anticancer drug camptothecin (CPT) in situ via the cleavage of the disulfide bond by the overexpressed glutathione, and could initiate the effective singlet oxygen (¹O₂) generation by porphyrin under light irradiation, ultimately resulting in severe mitochondrial dysfunction and a rising cell death rate with increasing micromolar concentration of NPs. These multicomponent supramolecular nanoassemblies effectively combined the two-step synergistic chemo-photodynamic therapy of reduction-release of CPT and light-triggered ¹O₂ generation within cancer cells presenting the synergistic effect of supramolecular nanoparticles on cancer therapy, which provide a new approach for efficient step-by-step cancer therapy.

Guest-induced supramolecular chirality transfer in [2]pseudorotaxanes: experimental and computational study

To reveal the factors governing the chirality transfer from a chiral unimolecule to a supramolecular assembly, we constructed a series of [2]pseudorotaxanes through the intermolecular noncovalent interaction of a pair of chiral binaphthalene crown ethers with achiral secondary ammonium salts with different chromophores, and found that the binaphthalene groups can induce new circular dichroism (CD) signals only in the [2]pseudorotaxane structures between the host crown ethers and the guest molecule with the anthryl group. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations show that the generation of the new CD signal is mainly due to the intermolecular chiral induction between the anthryl group in the guest and the naphthalene groups in the host.

The construction of an AIE-based controllable singlet oxygen generation system directed by a supramolecular strategy

An aggregation-induced emission based controllable singlet oxygen generation system has been successfully fabricated in an aqueous phase based on supramolecular host–guest assembly.

Cyclodextrin-Based Multistimuli-Responsive Supramolecular Assemblies and Their Biological Functions

Cyclodextrins (CDs), which are a class of cyclic oligosaccharides extracted from the enzymatic degradation of starch, are often utilized in molecular recognition and assembly constructs, primarily via host-guest interactions in water. In this review, recent progress in CD-based supramolecular nanoassemblies that are sensitive to chemical, biological, and physical stimuli is updated and reviewed, and intriguing examples of the biological functions of these nanoassemblies are presented, including pH- and redox-responsive drug and gene delivery, enzyme-activated specific cargo release, photoswitchable morphological interconversion, microtubular aggregation, and cell-cell communication, as well as a geomagnetism-controlled nanosystem for the suppression of tumor invasion and metastasis. Moreover, future perspectives and challenges in the fabrication of intelligent CD-based biofunctional materials are also discussed at the end of this review, which is expected to promote the translational development of these nanomaterials in the biomedical field.

Organo metal halide perovskites effectively photosensitize the production of singlet oxygen (1Δg)

Using the steady state and time resolved NIR emission and specific chemical trapping techniques, we show for the first time that metal halide perovskite quantum dots can effectively generate singlet oxygen with a quantum yield of up to 0.34, the highest among nano semiconductor/nano metal singlet oxygen photosensitizers. The mechanism is concluded to be due to energy transfer from triplet excitons to molecular oxygen.

Photo-controlled chirality transfer and FRET effects based on pseudo[3]rotaxane

The use of light to regulate the chirality of supramolecular assemblies in a non-invasive manner remains a challenge. Herein, we report a novel photochromic pseudo[3]rotaxane based on a (R/S)-2,2'-binaphthyl secondary ammonium salt guest (2) and anthracene-bridged bis(dibenzo-24-crown-8) (1), which features a chirality transfer and fluorescence resonance energy transfer (FRET) from 2 to 1. Benefiting from the photo-oxidation of anthracene, the induced circular dichroism (ICD) signals of (R/S)-2@1 can be switched off/on by irradiation with 365 nm UV light and heating. This noncovalent supramolecular assembly strategy provides us with unique opportunities to design and construct further smart photo-responsive chiral molecular switches.

Photoswitchable Förster resonance energy transfer (FRET) within a heterometallic Ir-Pt macrocycle

A new heterometallic macrocycle with photochromic properties was succesfully constructed through coordination-driven self-assembly, which features interesting photoswitchable Förster resonance energy transfer (FRET) behaviour.

Light-Controlled Generation of Singlet Oxygen within a Discrete Dual-Stage Metallacycle for Cancer Therapy

Noninvasive control over the reversible generation of singlet oxygen (¹O₂) has found the practical significance in benefiting photodynamic therapy. In this study, we developed a new dual-stage metallacycle (M) by using a photosensitizer and photochromic switch as the functional building blocks, which enables the noninvasive "off-on" switching of ¹O₂ generation through the efficient intramolecular energy transfer. Due to the proximal placement of the functional entities within the well-defined metallacyclic scaffold, ¹O₂ generation in the ring-closed form state of the photochromic switch (C-M) is quenched by photoinduced energy transfer, whereas the generation of ¹O₂ in the ring-open form state (O-M) is activated upon light irradiation. More interestingly, the metallacycle-loaded nanoparticles with relatively high stability and water solubility were prepared, which allow for the delivery of metallacycles to cancer cells via endocytosis. Their theranostic potential has been systematically investigated both in vitro and in vivo. Under the light irradiation, the designed ring-open form nanoparticles (O-NPs) show remarkable higher cytotoxicity against cancer cells compared to the ring-closed form nanoparticles (C-NPs). In vivo experiments also revealed that tumors can be very efficiently eliminated by the designed nanoparticles under light irradiation with the ability to regulate in vivo generation of singlet oxygen. All these results demonstrated that the supramolecular coordination complexes with a dual-stage state provide a highly efficient nanoplatform for noninvasive control over the reversible generation of ¹O₂, thus allowing for their promising applications in tumor treatment and beyond.

Site-Selective Supramolecular Complexation Activates Catalytic Ethane Oxidation by a Nitrido-Bridged Iron Porphyrinoid Dimer

Development of supramolecular methods to further activate a highly reactive intermediate is a fascinating strategy to create novel potent catalysts for activation of inert chemicals. Herein, a supramolecular approach to enhance the oxidizing ability of a high-valent oxo species of a nitrido-bridged iron porphyrinoid dimer that is a known potent molecular catalyst for light alkane oxidation is reported. For this purpose, a nitrido-bridged dinuclear iron complex of porphyrin-phthalocyanine heterodimer 3⁵⁺ , which is connected through a fourfold rotaxane, was prepared. Heterodimer 3⁵⁺ catalyzed ethane oxidation in the presence of H₂ O₂ at a relatively low temperature. The site-selective complexation of 3⁵⁺ with an additional anionic porphyrin (TPPS^4- ) through π-π stacking and electrostatic interactions afforded a stable 1:1 complex. It was demonstrated that the supramolecular post-synthetic modification of 3⁵⁺ enhances its catalytic activity efficiently. Moreover, supramolecular conjugates achieved higher catalytic ethane oxidation activity than nitrido-bridged iron phthalocyanine dimer, which is the most potent iron-oxo-based molecular catalyst for light-alkane oxidation reported so far. Electrochemical measurements proved that the electronic perturbation from TPPS^4- to 3⁵⁺ enhanced the catalytic activity.

Construction and heterogeneous photooxidization reactivity of a cyclodextrin/porphyrin polyrotaxane network

A supramolecular polyrotaxane network, based on a CD-based inclusion complex and porphyrin derivative, was synthesized by imine condensation reactions. Then it could be applied as a heterogeneous catalyst for generating singlet oxygen under photoirradiation, which showed its good ability to photooxidize anthracene derivatives.

Use of Cyclodextrins in Anticancer Photodynamic Therapy Treatment

Photodynamic therapy (PDT) is mainly used to destroy cancerous cells; it combines the action of three components: a photoactivatable molecule or photosensitizer (PS), the light of an appropriate wavelength, and naturally occurring molecular oxygen. After light excitation of the PS, the excited PS then reacts with molecular oxygen to produce reactive oxygen species (ROS), leading to cellular damage. One of the drawbacks of PSs is their lack of solubility in water and body tissue fluids, thereby causing low bioavailability, drug-delivery efficiency, therapeutic efficacy, and ROS production. To improve the water-solubility and/or drug delivery of PSs, using cyclodextrins (CDs) is an interesting strategy. This review describes the in vitro or/and in vivo use of natural and derived CDs to improve antitumoral PDT efficiency in aqueous media. To achieve these goals, three types of binding modes of PSs with CDs are developed: non-covalent CD⁻PS inclusion complexes, covalent CD⁻PS conjugates, and CD⁻PS nanoassemblies. This review is divided into three parts: (1) non-covalent CD-PS inclusion complexes, covalent CD⁻PS conjugates, and CD⁻PS nanoassemblies, (2) incorporating CD⁻PS systems into hybrid nanoparticles (NPs) using up-converting or other types of NPs, and (3) CDs with fullerenes as PSs.

Efficient energy transfer between coronene-modified permethyl-β-cyclodextrins and porphyrin for light induced DNA cleavage

A novel supramolecular assembly was constructed by the noncovalent complexation of hexa-cata-hexabenzocoronene modified permethyl-β-cyclodextrins with tetrasodium tetraphenylporphyrintetrasulfonate in water, exhibiting highly efficient excited energy transfer behaviors and a promising DNA photocleavage ability.

Chlorophyll a in cyclodextrin supramolecular complexes as a natural photosensitizer for photodynamic therapy (PDT) applications

Chlorophyll a (Chl a), an amphipathic porphyrin, was employed as natural photosensitizer for photodynamic therapy applications. Due to its lacking solubility in water and high tendency to aggregate, Chl a was included into different modified cyclodextrins (CDs) to form stable water-soluble supramolecular complexes. To achieve this aim, 2-Hydroxypropyl-β-cyclodextrin (2-HP-β-CD), 2-Hydroxypropyl-γ-cyclodextrin (2-HP-γ-CD), Heptakis(2,6-di-o-methyl)-β-cyclodextrin (DIMEB) and Heptakis(2,3,6-tri-o-methyl)-β-cyclodextrin (TRIMEB) were used. The chemical physical properties of Chl a/CD complexes in cellular medium were studied by means of UV-Vis absorption spectroscopy. Results demonstrated the good aptitude of 2-HP-γ-CD, and more particularly of 2-HP-β-CD, to solubilize the Chl a in cell culture medium in monomeric and photoactive form. Then, Chl a/2-HP-β-CD and Chl a/2-HP-γ-CD complexes were evaluated in vitro on human colorectal adenocarcinoma HT-29 cell line, and cytotoxicity and intracellular localization were respectively assessed. Further tests, such as phototoxicity, ROS generation, intracellular localization and mechanism of cell death were then focused exclusively on Chl a/2-HP-β-CD system. This complex exhibited no dark toxicity and a high phototoxicity toward HT-29 cells inducing cell death via necrotic mechanism. Therefore, it is possible to affirm that Chl a/2-HP-β-CD supramolecular complex could be a promising and potential formulation for applications in photodynamic therapy.

Fluorescence Resonance Energy Transfer Systems in Supramolecular Macrocyclic Chemistry

The fabrication of smart materials is gradually becoming a research focus in nanotechnology and materials science. An important criterion of smart materials is the capacity of stimuli-responsiveness, while another lies in selective recognition. Accordingly, supramolecular host-guest chemistry has proven a promising support for building intelligent, responsive systems; hence, synthetic macrocyclic hosts, such as calixarenes, cucurbiturils, cyclodextrins, and pillararenes, have been used as ideal building blocks. Meanwhile, manipulating and harnessing light artificially is always an intensive attempt for scientists in order to meet the urgent demands of technological developments. Fluorescence resonance energy transfer (FRET), known as a well-studied luminescent activity and also a powerful tool in spectroscopic area, has been investigated from various facets, of which the application range has been broadly expanded. In this review, the innovative collaboration between FRET and supramolecular macrocyclic chemistry will be presented and depicted with typical examples. Facilitated by the dynamic features of supramolecular macrocyclic motifs, a large variety of FRET systems have been designed and organized, resulting in promising optical materials with potential for applications in protein assembly, enzyme assays, diagnosis, drug delivery monitoring, sensing, photosynthesis mimicking and chemical encryption.

Dual Visible Light-Triggered Photoswitch of a Diarylethene Supramolecular Assembly with Cucurbit[8]uril

Research on photochromic molecules switched by visible light is of particular interest for their application in bioimaging and stimuli-responsive materials. Here, a photoswitchable supramolecular assembly comprised of monocharged bispyridinium-modified diarylethenes (DAEs) and cucurbit[8]uril (CB[8]) has been constructed, which exhibits reversible photochromic behaviour with visible light in both directions. The transformation of CB[8] not only prompts the DAEs to form charge-transfer complexes, but also restricts its intramolecular rotation to enhance fluorescence emission. In this CB[8]-containing supramolecular system, the π-conjugation is extended and its absorption is bathochromically shifted for visible light-driven cyclization of DAEs. Meanwhile, the fluorescence of the supramolecular assembly can also be reversibly modulated by visible light. These findings may furnish a new strategy for the development of visible light-driven fluorescent biomaterials and molecular machines.

Controllable Photodynamic Therapy Implemented by Regulating Singlet Oxygen Efficiency

With singlet oxygen (1O2) as the active agent, photodynamic therapy (PDT) is a promising technique for the treatment of various tumors and cancers. But it is hampered by the poor selectivity of most traditional photosensitizers (PS). In this review, we present a summary of controllable PDT implemented by regulating singlet oxygen efficiency. Herein, various controllable PDT strategies based on different initiating conditions (such as pH, light, H2O2 and so on) have been summarized and introduced. More importantly, the action mechanisms of controllable PDT strategies, such as photoinduced electron transfer (PET), fluorescence resonance energy transfer (FRET), intramolecular charge transfer (ICT) and some physical/chemical means (e.g. captivity and release), are described as a key point in the article. This review provide a general overview of designing novel PS or strategies for effective and controllable PDT.