Visible Light-Catalyzed Reactions of Polysulfide (DBSPS) with Aryldiazonium

A visible light-catalyzed radical coupling reaction of polysulfide reagents with aryldiazonium was developed, which gave thiosulfonates under mild conditions. In this reaction, the thiosulfonates were isolated in good yields with a broad tolerance to functional groups. And the synthesis of diaryl monosulfides were achieved through a step-by-step reaction of two molecular aryldiazonium with DBSPS, where the sulfur source was provided by DBSPS. It was worth noting that the reaction of this monosulfides could also be achieved by a one pot two-step process. The described polysulfide reagents were able to produce three new radicals: sulfonyl radicals, sulfur-sulfonyl radicals and sulfur-sulfur-sulfonyl radicals.

Photochemical acridone-mediated direct arylation of (hetero)arenes with aryl diazonium salts

A metal-free photochemical C-H direct arylation using acridone as a photoredox catalyst to facilitate the reaction is described. Diazonium salts as precursors for aryl radicals, demonstrated by a fluorescence quenching experiment and free radical trapping experiment, allow the functionalization of (hetero)arenes under mild conditions. A series of valuable substituted biaryl and aryl-heteroaryl compounds were prepared in moderate to good yields via the coupling. Moreover, this methodology is shown to be applicable to scale-up synthesis.

Redox-Neutral Decarboxylative and Desulfonylative C(sp3) Trifluoromethylation: Method Development and Mechanistic Inquiry

Sodium triflinate (CF₃SO₂Na) is an inexpensive bench-stable radical CF₃ source that is often activated by external oxidants such as peroxides. However, despite the commercial accessibility of CF₃SO₂Na, the salt has never been applied to decarboxylative trifluoromethylation due to challenges in controlled cross-radical coupling. We report a redox-neutral approach to decarboxylative C(sp³) trifluoromethylation of carboxylic acid derivatives. Mechanistic inquiry is performed to address the limitations in scope.

Visible light mediated organocatalytic dehydrogenative aza-coupling of 1,3-diones using aryldiazonium salts

An efficient protocol for diazenylation of 1,3-diones under photoredox conditions is presented herein. C-N bond forming C_sp³ -H functionalization of cyclic and alkyl diones by unstable aryl diazenyl radicals is achieved through reaction with aryldiazonium tetrafluoroborates by organocatalysts under visible light irradiation. The reaction has wide substrate scope, gives excellent yields, and is also efficient in water as a green solvent. This method provides an easy access to aryldiazenyl derivatives that are useful key starting materials for the synthesis of aza heterocycles as well as potential pharmacophores.

Recent advances in visible light-induced C(sp3)–N bond formation

Synthetic chemists have long focused on selective C(sp ³)-N bond-forming approaches in response to the high value of this motif in natural products, pharmaceutical agents and functional materials. In recent years, visible light-induced protocols have become an important synthetic platform to promote this transformation under mild reaction conditions. These photo-driven methods rely on converting visible light into chemical energy to generate reactive but controllable radical species. This Review highlights recent advances in this area, mostly after 2014, with an emphasis placed on C(sp ³)-H bond activations, including amination of olefins and carbonyl compounds, and cross-coupling reactions.

Multicomponent reactions and photo/electrochemistry join forces: atom economy meets energy efficiency

Visible-light photoredox catalysis has been regarded as an extremely powerful tool in organic chemistry, bringing the spotlight back to radical processes. The versatility of photocatalyzed reactions has already been demonstrated to be effective in providing alternative routes for cross-coupling as well as multicomponent reactions. The photocatalyst allows the generation of high-energy intermediates through light irradiation rather than using highly reactive reagents or harsh reaction conditions. In a similar vein, organic electrochemistry has experienced a fruitful renaissance as a tool for generating reactive intermediates without the need for any catalyst. Such milder approaches pose the basis toward higher selectivity and broader applicability. In photocatalyzed and electrochemical multicomponent reactions, the generation of the radical species acts as a starter of the cascade of events. This allows for diverse reactivity and the use of reagents is usually not covered by classical methods. Owing to the availability of cheaper and more standardized photo- and electrochemical reactors, as well as easily scalable flow-setups, it is not surprising that these two fields have become areas of increased research interest. Keeping these in view, this review is aimed at providing an overview of the synthetic approaches in the design of MCRs involving photoredox catalysis and/or electrochemical activation as a crucial step with particular focus on the choice of the difunctionalized reagent.

Highly chemoselective synthesis of hindered amides via cobalt-catalyzed intermolecular oxidative hydroamidation

α-Tertiary amides are of great importance for medicinal chemistry. However, they are often challenging to access through conventional methods due to reactivity and chemoselectivity issues. Here, we report a single-step approach towards such amides via cobalt-catalyzed intermolecular oxidative hydroamidation of unactivated alkenes, using nitriles of either solvent- or reagent-quantities. This protocol is selective for terminal alkenes over groups that rapidly react under known carbocation amidation conditions such as tertiary alcohols, electron-rich alkenes, ketals, weak C−H bonds, and carboxylic acids. Straightforward access to a diverse array of hindered amides is demonstrated, including a rapid synthesis of an aminoadamantane-derived pharmaceutical intermediate.

α-Tertiary amides are common in bioactive natural products and pharmaceuticals, but challenging to access by conventional methods. Here, the authors report a single-step approach toward α-tertiary amides via cobalt-catalyzed intermolecular oxidative hydroamidation of unactivated alkenes.

Hypervalent iodine(iii)-promoted rapid cascade reaction for the synthesis of unsymmetric azo compounds

A rapid three-component cascade reaction for the synthesis of unsymmetric azo compounds via a radical activation strategy has been reported. Various aryldiazonium salts and unactivated alkenes are well compatible, providing the corresponding products in good to excellent yields. This strategy gives an efficient and practical solution for the synthesis of unsymmetric azo compounds with two C-N bond formation. A free radical pathway mechanism is advised for this transformation.

ZnI2-Catalyzed Aminotrifluoromethylation Cyclization of Alkenes Using PhICF3Cl

We report here an alternatively catalytic aminotrifluoromethylation of alkenes using PhICF₃Cl as a bifunctional reagent along with ZnI₂ as a dual catalyst. A combined catalytic strategy was established for the intramolecular aminotrifluoromethylation of 4-pentenamines. As a result, a set of 2-trifluoroethyl-pyrrolidines was obtained in a high selectivity. Mechanism studies revealed that the reaction included an iodine anion-catalyzed radical chlorotrifluoromethylation of alkenes and a sequential Lewis acid-promoted aminocyclization of the resulting chlorotrifluoromethylated intermediates.

Three-component photoredox 1,2-alkylamination of styrenes with alkanes and nitrogen nucleophiles via C(sp3)–H bond cleavage

A three-component photoredox 1,2-alkylamination of styrenes involving functionalization of C(sp3)–H bonds in alkyl halides instead of functionalization of C-halogen bonds is disclosed.

Base-Promoted Radical Azofluoromethylation of Unactivated Alkenes

The base-induced reaction of aryl diazonium salts with commercially available CF₃SO₂Na/CF₂HSO₂Na allows for the generation of the corresponding diazene radicals along with fluoromethyl radicals. The addition of fluoromethyl radicals to alkenes with subsequent diazene trapping provides the azofluoromethylation products in good to excellent yields. This metal-free method under mild reaction conditions has broad functional group compatibility and is applicable in the late-stage modification of various natural products and bioactive molecules.

Photoredox-Catalyzed Synthesis of Alkylaryldiazenes: Formal Deformylative C-N Bond Formation with Alkyl Radicals

Diazenes are valuable compounds that have found broad applicability because of their optical and biological properties. We report the synthesis of alkylaryldiazenes via formal, photoredox-catalyzed, deformylative C-N bond formation. The procedure employs dihydropyridines for the generation of alkyl radicals, which are then trapped by diazonium salts and reduced to the corresponding diazenes. Control experiments were performed to confirm the involvement of radicals in the mechanism. The reaction can be carried out at room temperature and employs readily available reagents; the mild conditions allowed the use of highly functionalized substrates. There was no observed tautomerization of the diazenes to the corresponding arylhydrazones.

Intermolecular radical carboamination of alkenes

Vicinal alkene carboamination is a highly efficient and practical synthetic strategy for the straightforward preparation of diverse and valuable amine derivatives starting from simple compounds. During the last decade that approach has found continuous research interests and various practical methods have been developed using transition-metal catalysis. Driven by the renaissance of synthetic radical chemistry, intermolecular radical alkene carboamination comprising a C-C bond and a C-N bond forming step has been intensively investigated recently culminating in novel strategies and improved protocols which complement existing methodologies. Radical alkene carboamination can be achieved via three different reaction modes. Such cascades can proceed through N-radical addition to an alkene with subsequent C-C bond formation leading to 2,1-carboamination products. Alternatively, the C-C bond can be installed prior to the C-N bond via initial C-radical addition to the alkene with subsequent β-amination resulting in 1,2-carboamination. The third mode comprises initial single electron oxidation of the alkene to the corresponding alkene radical cation that gets trapped by an N-nucleophile and the cascade is terminated by radical C-C bond formation. In this review, the three different conceptual approaches will be discussed and examples from the recent literature will be presented. Further, the reader will get insights into the mechanism of the different transformations.

Visible-light-induced aerobic C3–H fluoroalkoxylation of quinoxalin-2(1H)-ones with fluoroalkyl alcohols

A novel and efficient method of visible-light-induced C3–H fluoroalkoxylation of quinoxalin-2(1H)-ones with fluoroalkyl alcohols is developed. This approach uses readily available fluoroalkyl alcohols as fluoroalkoxylation reagents and displays a wide substrate scope, providing the fluoroalkoxylated products in moderate to good yields. Compared with the previous method, such a transformation uses oxygen as an oxidant, which avoids the utilization of plenty of PhI(TFA)₂. In addition, this strategy also gives a practical tool for the rapid synthesis of histamine-4 receptor antagonist and new N-containing bidentate ligands. A radical mechanism was suggested according to the results of control experiments.

A visible-light-induced aerobic C3–H fluoroalkoxylation of quinoxalin-2(1H)-ones with fluoroalkyl alcohols was reported, providing a green access to fluoroalkoxylated quinoxalin-2(1H)-ones.

Bond-Forming and -Breaking Reactions at Sulfur(IV): Sulfoxides, Sulfonium Salts, Sulfur Ylides, and Sulfinate Salts

Organosulfur compounds have long played a vital role in organic chemistry and in the development of novel chemical structures and architectures. Prominent among these organosulfur compounds are those involving a sulfur(IV) center, which have been the subject of countless investigations over more than a hundred years. In addition to a long list of textbook sulfur-based reactions, there has been a sustained interest in the chemistry of organosulfur(IV) compounds in recent years. Of particular interest within organosulfur chemistry is the ease with which the synthetic chemist can effect a wide range of transformations through either bond formation or bond cleavage at sulfur. This review aims to cover the developments of the past decade in the chemistry of organic sulfur(IV) molecules and provide insight into both the wide range of reactions which critically rely on this versatile element and the diverse scaffolds that can thereby be synthesized.

Trifluoromethylation and Monofluoroalkenylation of Alkenes through Radical-Radical Cross-Coupling

The first visible-light-induced trifluoromethylation and monofluoroalkenylation of simple alkenes via a challenging radical-radical cross-coupling step was achieved. This method provided a mild, step-economical and redox-neutral route to privileged two different fluorinated difunctionalized allyl compounds. The utility of this method is illustrated by late-stage modification of medically important molecules.

Photocatalyzed cascade Meerwein addition/cyclization of N-benzylacrylamides toward azaspirocycles

A visible-light-induced cascade Meerwein addition/cyclization of alkenes involving C-F bond cleavage was developed. This method offers a rapid access to azaspirocyclic cyclohexadienones from N-benzylacrylamides via C-F bond cleavage applying H2O as an external oxygen source, allowing for the incorporation of various aromatic moieties originating from aryldiazonium salts.

Progress and prospects in the use of photocatalysis for the synthesis of organofluorine compounds

Data on the synthesis of fluorinated organic compounds by photocatalysis are systematically considered and analyzed. The attention is focused on the mechanisms of photocatalytic reactions and the selectivity problem.

The bibliography includes 173 references.

Copper-catalyzed one-pot three-component thioamination of 1,4-naphthoquinone

A concise one-pot three-component thioamination of 1,4-naphthoquinone with thiols and amines was developed to synthesize 2-amino-3-thio-1,4-naphthoquinones.

Copper-catalyzed intermolecular oxidative trifluoromethyl-arylation of styrenes with NaSO2CF3 and indoles involving C–H functionalization

A new copper-catalyzed three-component oxidative 1,2-trifluoromethylarylation of styrenes with NaSO₂CF₃ and indoles involving aryl C–H bond functionalization is described.

Photoinduced synthesis of α-trifluoromethylated ketones through the oxidative trifluoromethylation of styrenes using CF3SO2Na as a trifluoromethyl reagent without an external photoredox catalyst

A photoinduced strategy to access α-CF₃-substituted ketones by styrenes with sodium trifluoromethanesulfinate (CF₃SO₂Na) without an external photocatalyst was developed.