Luminescence Probes in Bio-Applications: From Principle to Practice

Bioanalysis based on optical imaging has gained significant progress in the last few decades. Luminescence probes are capable of detecting, monitoring, and tracing particular biomolecules in complex biological systems to figure out the roles of these molecules in organisms. Considering the rapid development of luminescence probes for bio-applications and their promising future, we have attempted to explore the working principles and recent advances in bio-applications of luminescence probes, in the hope of helping readers gain a detailed understanding of luminescence probes developed in recent years. In this review, we first focus on the current widely used luminescence probes, including fluorescence probes, bioluminescence probes, chemiluminescence probes, afterglow probes, photoacoustic probes, and Cerenkov luminescence probes. The working principles for each type of luminescence probe are concisely described and the bio-application of the luminescence probes is summarized by category, including metal ions detection, secretion detection, imaging, and therapy.

Molybdenum disulfide nanosheet induced reactive oxygen species for high-efficiency luminol chemiluminescence

BACKGROUND

Luminol chemiluminescence (CL) sensing system remains an excellent candidate for application in bioanalysis due to its good water solubility. However, traditional luminol CL system usually requires the addition of oxidizing agents and sensitizers to obtain high efficiency for the improvement of detection sensitivity. Although numerous studies on the nanomaterial-enhanced luminol CL systems have been carried out, there is still great potential to develop inexpensive, readily available and easily handled catalysts to construct simple and effective CL platform for biomolecular sensing.

RESULTS

Few-layered MoS2 nanosheets (NS) prepared by sonication-assisted exfoliation of commercially available bulk MoS2 were found to significantly enhance the CL of luminol‒dissolved oxygen in the absence of additional oxidants. The mechanism study demonstrated that exfoliated MoS2 NS could catalyze the decomposition of dissolved oxygen by virtue of its exposed active sites on the surface, generating increased reactive oxygen intermediates, which then oxidize luminol and produce intense CL emission. The proposed high-efficiency luminol CL system was then employed for the extremely sensitive identification of dopamine based on the quenching of CL by dopamine. The limit of detection (LOD) for dopamine can be as low as 2.07 nM. Besides, it also works well in the actual urine sample with good recoveries (99.6-100.6 %), confirming the practicability of the method.

SIGNIFICANCE

As a new type of CL catalyst, MoS2 NS developed in this work are easy to obtain, simple to prepare and can be produced in large quantities, which lays a foundation for extending applicability of MoS2 NS in the CL field, and provides a new idea for developing simple and highly sensitive CL sensing system.

Field Quantification of Hydroxyl Radicals by Flow-Injection Chemiluminescence Analysis with a Portable Device

Hydroxyl radical (•OH) is a powerful oxidant abundantly found in nature and plays a central role in numerous environmental processes. On-site detection of •OH is highly desirable for real-time assessments of •OH-centered processes and yet is restrained by a lack of an analysis system suitable for field applications. Here, we report the development of a flow-injection chemiluminescence analysis (FIA-CL) system for the continuous field detection of •OH. The system is based on the reaction of •OH with phthalhydrazide to generate 5-hydroxy-2,3-dihydro-1,4-phthalazinedione, which emits chemiluminescence (CL) when oxidatively activated by H2O2 and Cu3+. The FIA-CL system was successfully validated using the Fenton reaction as a standard •OH source. Unlike traditional absorbance- or fluorescence-based methods, CL detection could minimize interference from an environmental medium (e.g., organic matter), therefore attaining highly sensitive •OH detection (limits of detection and quantification = 0.035 and 0.12 nM, respectively). The broad applications of FIA-CL were illustrated for on-site 24 h detection of •OH produced from photochemical processes in lake water and air, where the temporal variations on •OH productions (1.0-12.2 nM in water and 1.5-37.1 × 107 cm-3 in air) agreed well with sunlight photon flux. Further, the FIA-CL system enabled field 24 h field analysis of •OH productions from the oxidation of reduced substances triggered by tidal fluctuations in coastal soils. The superior analytical capability of the FIA-CL system opens new opportunities for monitoring •OH dynamics under field conditions.

Online chemiluminescence determination of the hydroxyl radical using coumarin as a probe

The hydroxyl radical (˙OH) is one of the strongest oxidizing species, which can react with a variety of organic and inorganic chemicals. Although ˙OH is widely used for degradation of environmental pollutants, detection of ˙OH remains a major challenge due to its high reactivity and short lifetime, especially online detection. In this study, a novel method for online detection of ˙OH by flow oxidization chemiluminescence (F-OCL) using coumarin as a probe was established. The concentrations of ˙OH determined by this new method were consistent with those determined by HPLC analysis. Because the new method has a short response speed, it was successfully used to quantify the dynamic change of ˙OH in the TiO2 photocatalytic process and Fenton reaction in real time. Furthermore, a combination of two chemiluminescence systems was developed to track the dynamics of ˙OH and hydrogen peroxide (H2O2) in homogeneous or heterogeneous Fenton reactions occurring in soil slurry. The proposed method and strategy have good application potential in online ROS monitoring of both natural and engineered systems.

Europium-Functionalized Graphitic Carbon Nitride for Efficient Chemiluminescence Detection of Singlet Oxygen

Enhancing the sensitivity and selectivity of chemiluminescence (CL) sensors for detecting chemical species in complex samples poses a significant challenge in nanoparticle surface engineering. Graphitic carbon nitride (CN) shows promise but suffers from weak CL intensity and unknown luminescence mechanisms. In this study, we propose a nitrogen defect strategy to enhance the CL efficiency of europium-functionalized graphitic carbon nitride (Eu-CNNPs). By controlling the dosage of the europium modification, we can adjust the nitrogen defect content to reduce the energy gap and improve the CL performance. Remarkably, Eu-CNNPs with rich nitrogen defects exhibit strong chemiluminescence emission specifically for singlet oxygen (1O2) without responding to other reactive oxygen species (ROS). Building upon this finding, we developed a direct, selective, and sensitive CL sensing platform for 1O2 in PM2.5 and monitored 1O2 production in photosensitizers without interference from metal ions. Through extensive experiments, we attribute the 1O2-driven CL response to the presence of abundant nitrogen defects in the CN material, accelerating electron transfer and yielding a high generation of 1O2. Furthermore, chemiluminescence resonance energy transfer (CRET) between (1O2)2* (1O2 dimeric aggregate) and Eu-CNNPs contributes to strong CL emission. This work provides insights into enhancing the CL performance of CN and offers new possibilities for advancing the practical analysis of nanomaterials using the intriguing mechanism of nitrogen defects.

Europium functionalized black phosphorus quantum dots as a CRET platform for synergistically enhanced chemiluminescence

In this work, we synthesize stable europium ion modified black phosphorus quantum dots (Eu-BPQDs) using a microwave irradiation technique, which can react with organic amines exhibiting unique chemiluminescence (CL). The mechanism of the Eu-BPQDs/organic amines CL system accounting for the efficient CRET is induced by the chelation of organic amines with the surface functionalized europium.

Design and Challenges of Sonodynamic Therapy System for Cancer Theranostics: From Equipment to Sensitizers

As a novel noninvasive therapeutic modality combining low-intensity ultrasound and sonosensitizers, sonodynamic therapy (SDT) is promising for clinical translation due to its high tissue-penetrating capability to treat deeper lesions intractable by photodynamic therapy (PDT), which suffers from the major limitation of low tissue penetration depth of light. The effectiveness and feasibility of SDT are regarded to rely on not only the development of stable and flexible SDT apparatus, but also the screening of sonosensitizers with good specificity and safety. To give an outlook of the development of SDT equipment, the key technologies are discussed according to five aspects including ultrasonic dose settings, sonosensitizer screening, tumor positioning, temperature monitoring, and reactive oxygen species (ROS) detection. In addition, some state-of-the-art SDT multifunctional equipment integrating diagnosis and treatment for accurate SDT are introduced. Further, an overview of the development of sonosensitizers is provided from small molecular sensitizers to nano/microenhanced sensitizers. Several types of nanomaterial-augmented SDT are in discussion, including porphyrin-based nanomaterials, porphyrin-like nanomaterials, inorganic nanomaterials, and organic-inorganic hybrid nanomaterials with different strategies to improve SDT therapeutic efficacy. There is no doubt that the rapid development and clinical translation of sonodynamic therapy will be promoted by advanced equipment, smart nanomaterial-based sonosensitizer, and multidisciplinary collaboration.

Detection Technologies for Reactive Oxygen Species: Fluorescence and Electrochemical Methods and Their Applications

Reactive oxygen species (ROS) have been found in plants, mammals, and natural environmental processes. The presence of ROS in mammals has been linked to the development of severe diseases, such as diabetes, cancer, tumors, and several neurodegenerative conditions. The most common ROS involved in human health are superoxide (O2•-), hydrogen peroxide (H2O2), and hydroxyl radicals (•OH). Organic and inorganic molecules have been integrated with various methods to detect and monitor ROS for understanding the effect of their presence and concentration on diseases caused by oxidative stress. Among several techniques, fluorescence and electrochemical methods have been recently developed and employed for the detection of ROS. This literature review intends to critically discuss the development of these techniques to date, as well as their application for in vitro and in vivo ROS detection regarding free-radical-related diseases. Moreover, important insights into and further steps for using fluorescence and electrochemical methods in the detection of ROS are presented.

Advances in chemiluminescence and electrogenerated chemiluminescence based on silicon nanomaterials

Since 1950, when chemiluminescence (CL) of siloxane upon treatment with strong oxidants was discovered by Kurtz, many silicon-based nanomaterials with different elements, specific molecules, shapes and sizes have been developed as light emitters, energy acceptors, and catalyzers to provide valuable CL and electrogenerated CL (ECL) detection platforms in analytical chemistry fields. This review mainly focuses on the recent development of their mechanisms and sensing methodologies for small molecules, free radicals, ion, enzyme, protein, DNA, cancer cells, and metabolites based on specific reactions such as aptamer sensing and enzymatic reaction. Additionally, the future trend is discussed.

A simple chemiluminescent aptasensor for the detection of α-fetoprotein based on iron-based metal organic frameworks

MIL-100 (Fe) was used to construct a chemiluminescent aptasensing platform based on the electrostatic adsorption of MIL-100 (Fe) and aptamers.

Synergistic chemiluminescence nanoprobe: Au clusters-Cu2+-induced chemiexcitation of cyclic peroxides and resonance energy transfer

An interesting chemiluminescence (CL) phenomenon of cyclic peroxides originating from tetrahydrofuran hydrogen peroxide (THF-HPO) in the presence of BSA-stabilized Au NCs (Au@BSA NCs) was found for the first time.

Expanding the scope of chemiluminescence in bioanalysis with functional nanomaterials

Nanomaterial-enabled chemiluminescence (CL) detection has become a growing area of interest in recent years. We review the development of nanomaterial-based CL detection strategies and their applications in bioanalysis. Much progress has been achieved in the past decade, but most attempts still remain in the proof-of-concept stage. This review highlights recent advances in nanomaterials in CL detection and organizes them into three groups based on their role in detection: as a sensing platform, as a signal probe, and applications in homogeneous systems. Furthermore, we have discussed the critical challenges we are facing and future prospects of this field.

Chemiluminescence of Oleic Acid Capped Black Phosphorus Quantum Dots for Highly Selective Detection of Sulfite in PM2.5

Quantum dots (QDs), especially metal-free QDs with their unique optoelectronic properties, environmental friendliness, and excellent biocompatibility, have opened a new avenue to explore novel chemiluminescence (CL) systems for analytical applications. However, the unknown CL properties, relatively weak emission, and instability of some of them in water (e.g., black phosphorus QDs) often seriously hinder their further practical applications. Chemical modification trends have offered new properties for materials and have been proved to be desirable ways to establish sensing platforms with improved sensitivity and stability. Herein, oleic acid capped black phosphorus QDs (OA-BP QDs) with improved stability and optical properties were successfully synthesized. More importantly, an extraordinary CL emission when OA-BP QDs reacted with SO₃^2- was first observed. In the CL process, OA-BP QDs acted as the catalyst to trigger singlet oxygen (¹O₂) generation in NaHSO₃, and then a chemiluminescence resonance energy transfer (CRET) between (¹O₂)₂* (¹O₂ dimeric aggregate) and OA-BP QDs was produced. On this basis, a new CL system for directly monitoring SO₃^2- in airborne fine particulate matter (PM_2.5) was fabricated. The study opens attractive perspectives of modified metal-free QDs for the practice of CL in monitoring the chemical species in PM_2.5.

Copper nanoclusters-enhanced chemiluminescence for folic acid and nitrite detection

The reaction between diperiodatoargentate(III) (DPA) and folic acid (FA) produced weak chemiluminescence (CL) in acid medium, which was greatly enhanced in the presence of copper nanoclusters (CuNCs). The CL intensity of CuNCs-DPA-FA system increased with the concentration of FA ranging from 0.1 to 10.0 μM. The proposed CL system was applied for the detection of FA in pharmaceutical formulation and human urine samples. Further, the CL signal of CuNCs-DPA-FA system was inhibited by nitrite, and the inhibited CL intensity was proportional to the nitrite concentration in the range of 1.0-80.0 μM. The method was successfully applied to determine nitrite in water, pickled vegetable and sausage samples. A possible CL mechanism was briefly discussed.

An amplified chemiluminescence system based on Si-doped carbon dots for detection of catecholamines

We report on a chemiluminescence (CL) system based on simultaneous enhancing effect of Si-doped carbon dots (Si-CDs) and cetyltrimethylammonium bromide (CTAB) on HCO₃^--H₂O₂ reaction_. The possible CL mechanism is investigated and discussed. Excited-state Si-CDs was found to be the final emitting species, which are probably produced via electron and hole injection by oxy-radicals. The effect of several other heteroatom-doped CDs and undoped CDs was also investigated and compared with Si-CDs. Furthermore, it was found that catecholamines such as dopamine, adrenaline and noradrenaline remarkably diminish the CL intensity of Si-CD-HCO₃^--H₂O₂-CTAB system. By taking advantage of this fact, a sensitive probe was designed for determination of dopamine, adrenaline and noradrenaline with a limit of detection of 0.07, 0.60 and 0.01 μM, respectively. The method was applied to the determination of catecholamines in human plasma samples.

Chemiluminescence of black phosphorus quantum dots induced by hypochlorite and peroxide

For the first time, black phosphorus quantum dots (BP QDs) were found to show chemiluminescence (CL) properties in the presence of hydrogen peroxide (H₂O₂) and hypochlorite (ClO⁻).

Highly efficient approach for hypochlorous acid sensing in water samples and living cells based on acylhydrazone Schiff base functionalized fluorescent probes

Five HClO probes were present with high selectivity and sensitivity. The properties and mechanism were investigated both experimentally and theoretically.

Ultra-weak chemiluminescence enhanced by facilely synthesized nitrogen-rich quantum dots through chemiluminescence resonance energy transfer and electron hole injection

In this study, a novel nitrogen-rich dots were easily synthesized with high percentage of nitrogen and exhibited unique CL property.