Direct-readout photoelectrochemical lab-on-paper biosensing platform based on coupled electricity generating system and paper supercapacitors

A direct-readout photoelectrochemical (PEC) lab-on-paper device based on coupled an electricity generating system and paper supercapacitors was established for highly sensitive detection of adenosine triphosphate (ATP). Concretely, CdSe quantum dots (QDs) decorated ZnO networks assembled sensing surface provided outstanding photoelectric properties, on which glucose oxidase (GOx) labeled aptamer was subsequently immobilized via the hybridization chain reaction. With analytes present, specific recognition was stimulated by aptamer, resulting in labeled GOx released. Such released GOx could flow to electrochemical cell to conduct electrochemical redox reactions, which could effectively produce electricity that was stored by capacitor I. Sequentially, photoactive material produced an outstanding voltage due to the decrease of steric hindrance on the sensing interface, which was utilized for charging an external capacitor II. The two instantaneous current was acquired along with the discharge of capacitor I and II by digital multimeter (DMM) readout, respectively. The summational current values performed an increment in pace with the addition of target ATP concentration with the dynamic working range from 10 nM to 3 μM and a detection limit of 6.3 nM attained. Significantly, the signal amplified strategy utilizing as-generated electricity from electrochemical redox reactions were isolated from the photoelectrodes, which was beneficial for amplifying the signal response in the PEC matrices and the development of more efficient signal performance.

Soft Materials for Wearable/Flexible Electrochemical Energy Conversion, Storage, and Biosensor Devices

Next-generation wearable technology needs portable flexible energy storage, conversion, and biosensor devices that can be worn on soft and curved surfaces. The conformal integration of these devices requires the use of soft, flexible, light materials, and substrates with similar mechanical properties as well as high performances. In this review, we have collected and discussed the remarkable research contributions of recent years, focusing the attention on the development and arrangement of soft and flexible materials (electrodes, electrolytes, substrates) that allowed traditional power sources and sensors to become viable and compatible with wearable electronics, preserving or improving their conventional performances.

A Paper-Based Microfluidic Fuel Cell Using Soft Drinks as a Renewable Energy Source

The research aims were to construct an air-breathing paper-based microfluidic fuel cell (paper-based μ FC) and to evaluated it with different soft drinks to provide energy for their prospective use in portable devices as an emergency power source. First, in a half-cell configuration, cyclic voltammetry showed that glucose, maltose, and fructose had specific oxidation zones in the presence of platinum-ruthenium on carbon (PtRu/C) when they were individual. Still, when they were mixed, glucose was observed to be oxidized to a greater extent than fructose and maltose. After, when a paper-based μ FC was constructed, PtRu/C and platinum on carbon (Pt/C) were used as anode and cathode, the performance of this μ FC was mostly influenced by the concentration of glucose present in each soft drink, obtaining maximum power densities at room temperature of 0.061, 0.063, 0.060, and 0.073 mW cm − 2 for Coca Cola ® , Pepsi ® , Dr. Pepper ® , and 7up ® , respectively. Interestingly, when the soft drinks were cooled, the performance was increased up to 85%. Furthermore, a four-cell stack μ FC was constructed to demonstrate its usefulness as a possible power supply, obtaining a power density of 0.4 mW cm − 2 , using Coca Cola ® as fuel and air as oxidant. Together, the results of the present study indicate an alternative application of an μ FC using soft drinks as a backup source of energy in emergencies.

A Self-Powered Biosensor with a Flake Electrochromic Display for Electrochemical and Colorimetric Formaldehyde Detection

The formaldehyde biosensors with the features of cost effectiveness, high specificity, easy operation, and simplicity are urgently desired in routing and field detection of formaldehyde. Here, we report a new design of an enzymatic self-powered biosensor (ESPB) toward formaldehyde detection. The ESPB involves a formaldehyde dehydrogenase/poly-methylene green/buckypaper bioanode as the sensing electrode and a Prussian blue/Au nanoparticles/carbon fiber paper cathode as the electrochromic display. Formaldehyde acts as the fuel to drive the ESPB, relying on that the concentration of formaldehyde can be determined with the ESPB by both directly measuring the variance in short circuit current and observing the color change of the cathode. By measuring the variance in short circuit current, a linear detection range from 0.01 to 0.35 mM and a calculated detection limit of 0.006 mM are obtained, comparable to or better than those reported before. The color change of the cathode can be distinguished easily and exactly via the naked eye after immersing the ESPB in formaldehyde solution for 90 s with the concentration up to 0.35 mM, covering the permissive level of formaldehyde in some standards associated with environmental quality control. Specially, the formaldehyde concentration can be precisely quantified by analyzing the color change of the cathode digitally using the equation of B/(R + G + B). In the following test of real spiked samples of tap water and lake water, the recovery ratios of formaldehyde with the concentrations from 0.010 to 0.045 mM are tested to be between 95 and 100% by both measuring the variance in short circuit current and analyzing the color change of the cathode digitally. In addition, the ESPB exhibits negligible interference from acetaldehyde and ethanol and can be stored at 4 °C for 21 days with a loss of less than 8% in its initial value of short circuit current. Therefore, the ESPB with the capability of working like disposable test paper can be expected as a sensitive, simple, rapid, cost-effective colorimetric method with high selectivity in routing and field formaldehyde detection.

Visual distance readout to display the level of energy generation in paper-based biofuel cells: application to enzymatic sensing of glucose

Biofuel cells (BFCs) based on anodic oxidation and cathodic oxygen reduction represent an attractive alternative to self-powered devices. A glucose/oxygen BFC is described for monitoring glucose. It is making use of a piece of paper carrying a glucose oxidase (GOx) based bioanode, and a bilirubin oxidase (BilOx) based biocathode. The performance of the BFC is affected by the generation of H₂O₂, a byproduct of enzymatic glucose oxidation. Therefore, the removal of H₂O₂ is a crucial step in terms of BFC performance and stability. In addition, direct, unambiguous visual read-out is an ideal way to provide quantitative information. The colorimetric readout system described here is based on the consumption of undesired H₂O₂ and to convert the extent of energy generation into recognizable variations in color. As the H₂O₂ travels along the hydrophilic channel by capillary action, the formation of red gold nanoparticles from AuCl₄^- leads to the appearance of a red bar that provides distance-based information that can be read visually. The multiply readable information (maximum power density of BFC or visible distance) provides further choices for quantification. It also enhances reliability. The self-powered system based on the BFC exhibits excellent performance. Glucose can be determined by this method in the 1 to 50 mM concentration range. Graphical abstract Schematic presentation of a paper-supported biofuel cell equipped with a visual distance readout to display the level of energy generation in biofuel cells, and its application in sensing of glucose.

Microbial recycling cells (MRCs): A new platform of microbial electrochemical technologies based on biocompatible materials, aimed at cycling carbon and nutrients in agro-food systems

This article reviews the mechanisms that drive nutrients and carbon sequestration from wastewaters by microbial electrochemical technologies (METs). In this framework, a new generation of METs is also presented (to be called microbial recycling cells, MRCs), based on 100%-recyclable materials (biomass-derived char coal, clay, terracotta, paper, ligno-cellulosic plant materials, etc.), which can act as bio-electrodes, separators and structural frames. In traditional METs architectures (based on technological materials such as carbon cloths, plastic panels, membranes, binders), inorganic salts precipitation and adsorption, as well as biofouling due to organic-matter deposition, are considered as main drawbacks that clog and hinder the systems over relatively short periods. In MRCs, these mechanisms should be maximized, instead of being avoided. In this perspective, both inorganic and organic forms of the main nutrients are sequestered from wastewater and deposited on METs modules. Once the systems become saturated, they can entirely be recycled as agricultural soil conditioners or as base for organic-mineral fertilizers.

Solar driven electrochromic photoelectrochemical fuel cells for simultaneous energy conversion, storage and self-powered sensing

One solar-driven electrochromic photoelectrochemical fuel cell (PFC) with highly efficient energy conversion and storage is easily constructed to achieve quantitative self-powered sensing. Layered bismuth oxyiodide-zinc oxide nanorod arrays (ZnO@BiOI NRA) with a core/shell p-n heterostructure are fabricated as the photoanode with electrochromic Prussian blue (PB) as the cathode. The core/shell p-n heterostructure for the ZnO@BiOI photoanode can effectively boost the photoelectrochemical (PEC) performance through the improvement of photon absorption and charge carrier separation. The optimal assembled PFC yields an open-circuit voltage (V_OC) of 0.48 V with the maximum power output density (P_max) as high as 155 μW cm^-2 upon illumination. Benefitting from the interactive color-changing behavior of PB, the cathode not only exhibits cathodic catalytic activity in the PFC but also serves as an electrochromic display for self-powered sensing. The as-constructed PFC possesses multiple readable signal output nanochannels through the maximum power output density (P_max) of the PFC or the color change of PB. Meanwhile, the dual-signal-output makes the as-constructed self-powered sensor highly available in various operations demands with the enhanced reliability. With the advantages of high efficiency of PFCs, unique assay ability, and broad environmental suitability, the constructed self-powered platform shows broad application prospects as an integrated smart analytical device.