Fluorescent polymer prodrug nanoparticles with aggregation-induced emission (AIE) properties from nitroxide-mediated polymerization

Thermosensitive polymer prodrug nanoparticles prepared by an all-aqueous nanoprecipitation process and application to combination therapy

Despite their great versatility and ease of functionalization, most polymer-based nanocarriers intended for use in drug delivery often face serious limitations that can prevent their clinical translation, such as uncontrolled drug release and off-target toxicity, which mainly originate from the burst release phenomenon. In addition, residual solvents from the formulation process can induce toxicity, alter the physico-chemical and biological properties and can strongly impair further pharmaceutical development. To address these issues, we report polymer prodrug nanoparticles, which are prepared without organic solvents via an all-aqueous formulation process, and provide sustained drug release. This was achieved by the "drug-initiated" synthesis of well-defined copolymer prodrugs exhibiting a lower critical solution temperature (LCST) and based on the anticancer drug gemcitabine (Gem). After screening for different structural parameters, prodrugs based on amphiphilic diblock copolymers were formulated into stable nanoparticles by all-aqueous nanoprecipitation, with rather narrow particle size distribution and average diameters in the 50-80 nm range. They exhibited sustained Gem release in human serum and acetate buffer, rapid cellular uptake and significant cytotoxicity on A549 and Mia PaCa-2 cancer cells. We also demonstrated the versatility of this approach by formulating Gem-based polymer prodrug nanoparticles loaded with doxorubicin (Dox) for combination therapy. The dual-drug nanoparticles exhibited sustained release of Gem in human serum and acidic release of Dox under accelerated pathophysiological conditions. Importantly, they also induced a synergistic effect on triple-negative breast cancer line MDA-MB-231, which is a relevant cell line to this combination.

Triphenylamine-Based N,O-Bidentate BF2 -Enolimine Initiator for Three-Arm Star Polymethacrylates with Dual-State Fluorescent Emission

Three-arm star polymethacrylates with dual-phase (solution and solid-state) fluorescent emission have been synthesized via atom transfer radical polymerization (ATRP) using a triphenylamine-derived organboron complex (TAPA-BKI-3Br) as initiator. The as-synthesized three-arm star polymethacrylates exhibited bright emission in both solution and the solid states due to the highly twisted structure and intramolecular charge transfer (ICT) effect of TAPA-BKI core, as well as the steric effect and restriction of intramolecular motions from the polymer arms. And the polymer chains have an important influence on the photophysical behavior of the as-synthesized three-arm star polymethacrylates in the aggregated state.

Degradable polyisoprene by radical ring-opening polymerization and application to polymer prodrug nanoparticles

Radical ring-opening copolymerization of isoprene and dibenzo[c,e]oxepane-5-thione via free-radical and controlled radical polymerizations led to degradable polyisoprene under basic, oxidative and physiological conditions with application to prodrug nanoparticles.

A supramolecular nano-delivery system based on AIE PARP inhibitor prodrug and glycosylated pillar[5]arene for drug-resistance therapy

A supramolecular nano-delivery system GP5⊃Pro-ANI based on the host-guest complex of glycosylated pillar[5]arene (GP5) and an amide linked fluorescent PARP inhibitor (4-amino-1,8-naphthimide, ANI) was constructed. The PARP inhibitor ANI, capable of inhibiting the ability of DNA damage repair, was modified into an AIE prodrug (Pro-ANI), which allows for the visualization of real-time cancer cellular drug uptake tracing and selective drug release. In vitro studies revealed that the DOX-loaded GP5⊃Pro-ANI achieved targeted drug delivery and dual-drug synergistic chemotherapy for DNA repair interference and tumor DNA collapse aggravation, which enhanced the chemosensitivity and overcame tumor drug resistance and migration. This strategy paves a new avenue for utilizing PARP inhibitors to construct AIE supramolecular nano-delivery systems for drug uptake visualization and synergistic chemotherapy.

Engineering Au Nanoclusters for Relay Luminescence Enhancement with Aggregation-Induced Emission

The research of aggregation-induced emission (AIE) has been growing rapidly for the design of highly luminescent materials, as exemplified by the library of AIE-active materials (or AIEgens) fabricated and explored for diverse applications in different fields. Herein, we reported a relay luminescence enhancement of luminescent Au nanoclusters (Au NCs) through AIE. In addition, we demonstrated the emergence of reduced aggregation-caused luminescence by adjusting the temperature of the Au NC solution. The key to induce this effect is to attach a thermosensitive polymer poly(N-isopropylacrylamide) (PNIPAAm) on the surface of Au NCs, which will shrink at high temperature. More interestingly, the as-synthesized Au NCs-PNIPAAm can self-assemble into vesicles, resulting in an obvious decrease in the luminescence intensity in aqueous solution. The combination of relay luminescence enhancement (by AIE) and luminescence decrease (induced by thermosensitive polymers) will be beneficial to the understanding and manipulation of the optical properties of Au NCs, paving the way for their practical applications.

Bipolar 1,8-naphthalimides showing high electron mobility and red AIE-active TADF for OLED applications

Aiming to design bipolar organic semiconductors with high electron mobility and efficient red thermally activated delayed fluorescence (TADF), three donor-acceptor compounds were designed and synthesized selecting 1,8-naphthalimide as an acceptor and phenoxazine, 3,7-di-tert-butylphenothiazine or 2,7-di-tert-butyldimethyl-9,10-dihydroacridine as donor moieties. Aggregation induced emission enhancement was detected for the compounds causing efficient TADF in the solid-state. Photoluminescence quantum yields up to 77% were observed for the films of the compounds doped in a host. The compounds exhibited small singlet-triplet splitting (0.03-0.05 eV), and high reverse intersystem crossing rates of 2.08 × 10⁵-1.13 × 10⁶ s^-1. The compounds were characterized by satisfactory hole and electron-injecting properties with ionization potentials of 5.72-5.83 eV and electron affinities of 2.79-2.91 eV. Bipolar charge transport was revealed by time of flight measurements. Electron transport with low dispersity and mobilities exceeding 2 × 10^-3 cm² V^-1 s^-1 was observed at an electric field of 4.6 × 10⁵ V cm^-1. The compounds were used as emitters in red electroluminescent devices, which showed maximum external quantum efficiencies up to 8.2%. Utilization of host-guest systems as light-emitting materials with hosts preferably transporting holes and TADF guests which preferably transport electrons allowed maximum efficiencies to be achieved at a practical brightness of 700-2200 cd m^-2. DFT calculations of the geometry, electronic structure, absorption and photoluminescence spectra of all compounds were carried out to prove the conclusions drawn from the experiment. The results of the calculations clearly show that the first excited state for all compounds is the intramolecular charge transfer state. Quantitative analysis of the separation degree of electronic density during excitation allows the observed dependence of the blue shift value in the absorption and emission spectra on the increasing polarity of the solvent to be explained.

Controlling Molecular Aggregation-Induced Emission by Controlled Polymerization

In last twenty years, the significant development of AIE materials has been witnessed. A number of small molecules, polymers and composites with AIE activity have been synthesized, with some of these exhibiting great potential in optoelectronics and biomedical applications. Compared to AIE small molecules, macromolecular systems-especially well-defined AIE polymers-have been studied relatively less. Controlled polymerization methods provide the efficient synthesis of well-defined AIE polymers with varied monomers, tunable chain lengths and narrow dispersity. In particular, the preparation of single-fluorophore polymers through AIE molecule-initiated polymerization enables the systematic investigation of the structure-property relationships of AIE polymeric systems. Here, the main polymerization techniques involved in these polymers are summarized and the key parameters that affect their photophysical properties are analyzed. The author endeavored to collect meaningful information from the descriptions of AIE polymer systems in the literature, to find connections by comparing different representative examples, and hopes eventually to provide a set of general guidelines for AIE polymer design, along with personal perspectives on the direction of future research.

Molecular Imaging-Guided Sonodynamic Therapy

Low-intensity ultrasound-triggered sonodynamic therapy (SDT) is a promising noninvasive therapeutic modality due to its strong tissue penetration ability. In recent years, with the development of nanotechnology, nanoparticle-based sonosensitizer-mediated SDT has been widely investigated. With the increasing demand for precise and personalized treatment, abundant novel sonosensitizers with imaging capabilities have been developed for determining the optimal therapeutic window, thus significantly enhancing treatment efficacy. In this review, we focus on the molecular imaging-guided SDT. The prevalent mechanisms of SDT are discussed, including ultrasonic cavitation, sonoluminescence, reactive oxygen species, and mechanical damage. In addition, we introduce the major molecular imaging techniques and the design principles based on nanoparticles to achieve efficient imaging. Furthermore, the imaging-guided SDT for the treatment of cancer, bacterial infections, and vascular diseases is summarized. The ultimate goal is to design more effective imaging-guided SDT modalities and provide novel ideas for clinical translation of SDT.

Turn-on fluorescent naphthalimide-benzothiazole probe for cyanide detection and its two-mode aggregation-induced emission behavior

Naphthalimide-benzothiazole conjugate (NBTZ) linked by cinnamonitrile was designed, synthesized, and fully characterized by NMR (¹H, ¹³C, DEPT, HSQC) and high-resolution mass spectrometry. NBTZ exhibited unique turn-on fluorescence in the presence of CN^- with relatively high selectivity compared to other anions such as SCN^-, HSO₄^-, ClO₄^-, NO₃^-, Cl^-, Br^-, I^-, and PO₄^-3 in tetrahydrofuran (THF). The detection limit for CN^- was found to be 3.35 × 10^-8 M in THF. The sensing mechanism was analyzed through ¹H, ¹³C, DEPT, and mass spectroscopy. NBTZ also showed two-mode aggregation-induced emission (AIE) in THF-H₂O mixtures. In a 30:70 THF-H₂O (v/v) mixture, the maximum AIE was observed at 430 nm (blue) because of the rotation of the CC bond between the naphthalimide ring and the phenyl ring was restricted. In 10:90 THF-H₂O (v/v), a new red-shifted AIE appeared at 490 nm (cyan), due to the extended π-conjugation induced by restriction of rotation of the CC bond between the benzothiazole and naphthalimide rings.

Continuous color tuning of single-fluorophore emission via polymerization-mediated through-space charge transfer

Tuning emission color of molecular fluorophores is of fundamental interest as it directly reflects the manipulation of excited states at the quantum mechanical level. Despite recent progress in molecular design and engineering on single fluorophores, a systematic methodology to obtain multicolor emission in aggregated or solid states, which gives rise to practical implications, remains scarce. In this study, we present a general strategy to continuously tune the emission color of a single-fluorophore aggregate by polymerization-mediated through-space charge transfer (TSCT). Using a library of well-defined styrenic donor (D) polymers grown from an acceptor (A) fluorophore by controlled radical polymerization, we found that the solid-state emission color can be fine-tuned by varying three molecular parameters: (i) the monomer substituent, (ii) the end groups of the polymer, and (iii) the polymer chain length. Experimental and theoretical investigations reveal that the color tunability originates from the structurally dependent TSCT process that regulates charge transfer energy.

Multifunctional Organic Fluorescent Probe with Aggregation-Induced Emission Characteristics: Ultrafast Tumor Monitoring, Two-Photon Imaging, and Image-Guide Photodynamic Therapy

The development of multifunctional photosensitizers (PSs) with aggregation-induced emission (AIE) properties plays a critical role in promoting the progress of the photodynamic therapy (PDT). In this work, a multifunctional PS (named DSABBT NPs) with AIE activity has been designed and prepared to carry out ultrafast staining, excellent two-photon bioimaging, and high-efficiency image-guided PDT. Simply, DSABBT with AIE characteristic was synthesized by one-step Schiff reaction of 4-(diethylamino)-salicylaldehyde (DSA) and 4,7-bis(4-aminophenyl)-2,1,3-benzothiadiazole (BBT). Then, DSABBT and DSPE-PEG₂₀₀₀-cRGD generate nanoparticles (NPs) easily in an ultrapure water/tetrahydrofuran mixture through a facile nanoprecipitation at room temperature. We found that DSABBT NPs exhibit bright solid-state fluorescence with large stokes shifts (180 nm) and two-photon absorption cross-section (1700 GM). Importantly, DSABBT NPs exhibited excellent ability of ultrafast staining and two-photon imaging, which can readily label suborganelles by subtly shaking the living cells for 5 s under mild conditions. Moreover, DSABBT NPs displayed high singlet oxygen (¹O₂) generation capacity and remarkable image-guided PDT efficiency. Therefore, DSABBT NPs can act as the promising candidate for multifunctional PSs, which can destroy cancer cells and block malignant tumor growth via the production of reactive oxygen species upon irradiation conditions. These outcomes provide us with a selectable strategy for developing multifunctional theranostic systems.

Efficient FRET Approaches toward Copper(II) and Cyanide Detections via Host-Guest Interactions of Photo-Switchable [2]Pseudo-Rotaxane Polymers Containing Naphthalimide and Merocyanine Moieties

A supramolecular [2]pseudo-rotaxane containing a naphthalimide-based pillararene host and a spiropyran-based imidazole guest was synthesized and investigated in a semiaqueous solution with 90% water fraction. Upon UV exposure, the close-form structure of nonemissive spiropyran guest could be transformed into the open-form structure of red-emissive merocyanine guest reversibly, which was utilized as a monofluorophoric sensor to detect copper(II) and cyanide ions. Moreover, the naphthalimide host as an energy donor with green photoluminescence (PL) emission at 505 nm was complexed with the merocyanine guest as an energy acceptor with red PL emission at 650 nm in 1:1 molar ratio to generate a [2]pseudo-rotaxane polymer, which was further verified by the diffusion coefficients of DOSY nuclear magnetic resonance (NMR) measurements. Due to the Förster resonance energy transfer (FRET) processes, the bifluorophoric [2]pseudo-rotaxane produced more efficient ratiometric PL behavior to induce a stronger red PL emission than that of the monofluorophoric guest; therefore, the PL sensor responses of the supramolecular [2]pseudo-rotaxane toward copper(II) and cyanide ions could be further amplified via the FRET-OFF processes to turn off red PL emission of the reacted merocyanine acceptor and to recover green PL emission of the naphthalimide donor. Accordingly, the best and prominent values of the limit of detection (LOD) for the host-guest detections toward Cu²⁺ and CN^- were 0.53 and 1.34 μM, respectively. The highest red MC emission with the optimum FRET processes of [2]pseudo-rotaxane was maintained around room temperature (20-40 °C) in wide pH conditions (pH = 3-13), which can be utilized in the cell viability tests to prove the nontoxic and remarkable biomarker of [2]pseudo-rotaxane to detect Cu²⁺ and CN^- in living cells. The developed FRET-OFF processes with ratiometric PL behavior of the bifluorophoric supramolecular [2]pseudo-rotaxane polymer will open a new avenue to the future applications of chemo- and biosensors.

A self-healing supramolecular hydrogel with temperature-responsive fluorescence based on an AIE luminogen

In this work, an AIE luminogen-based hydrogel with temperature-responsive fluorescence was designed and synthesized. The polymeric hydrogel consisted of a supramolecular network through coordination and ionic interactions. When the temperature was decreased, due to the motion restriction of the polyacrylic acid macromolecular segments and the enhancement in ionic interaction, the hydrogel exhibited a blue-shift in the fluorescence emission peak and increase in the fluorescence intensity, resulting in the visualization of fluorescence changes. The hydrogel network benefitted from non-covalent crosslinking and thus possessed self-healing properties at room temperature with good toughness and resiliency. Therefore, this fluorescent supramolecular hydrogel might be used as a temperature-responsive material.

A supramolecular hydrogel was synthesized by using tetra(4-(pyridin-4-yl)phenyl)ethylene (TPPE) as AIE luminogen. The gel not only featured self-healing performance, but also exhibited the temperature-responsive fluorescence with thermochromism.

Measuring nanoparticle-induced resonance energy transfer effect by electrogenerated chemiluminescent reactions

Electrogenerated chemiluminescence (ECL) efficiencies, redox potentials, photoluminescent (PL) (quenching and coupling) effects, and AFM images for the [Ru(bpy)₃]²⁺/Au@tiopronin system were determined in aqueous solutions of the gold nanoparticles (NPs) at pH 7.0. The most remarkable finding was that ECL measurements can display the nanoparticle-induced resonance energy transfer (NP-RET) effect. Its effectiveness was quantified through a coefficient, K_(NP-RET)ECL, which measures how much an ECL reaction has been enhanced. Moreover, the NP-RET effect was also checked using PL measurements, in such a way that a coefficient, K_(NP-RET)PL, was determined; both constants, K_(NP-RET)ECL and K_(NP-RET)PL being in close agreement. It is important to highlight the fact that the NP-RET effect is only displayed in diluted solutions in which there is no NPs self-aggregation. The existence of the NPs self-aggregation behavior is revealed through AFM measurements.

Electrogenerated chemiluminescence efficiencies, redox potentials, photoluminescent (quenching and coupling) effects, and AFM images for the [Ru(bpy)₃]²⁺/Au@tiopronin system were determined in aqueous solutions of the gold nanoparticles at pH 7.0.

Fluorescent chemosensors based on conjugated polymers with N-heterocyclic moieties: two decades of progress

A brief summary of representative fluorescent chemosensors based on conjugated polymers with N-heterocyclic moieties, followed by a discussion on the limitations and challenges of current systems, as well as possible future research directions.

Protein-functionalized nanoparticles derived from end-functional polymers and polymer prodrugs for crossing the blood-brain barrier

Nanoparticles may provide a viable way for neuroprotective drugs to cross the blood-brain barrier (BBB), which limits the passage of most drugs from the peripheral circulation to the brain. Heterotelechelic polymer prodrugs comprising a neuroprotective model drug (adenosine) and a maleimide functionality were synthesized by the "drug-initiated" approach and subsequent nitroxide exchange reaction. Nanoparticles were obtained by nanoprecipitation and exhibited high colloidal stability with diameters in the 162-185 nm range and narrow size distributions. Nanoparticles were then covalently surface-conjugated to different proteins (albumin, α2-macroglobulin and fetuin A) to test their capability of enhancing BBB translocation. Their performances in terms of endothelial permeability and cellular uptake in an in vitro BBB model were compared to that of similar nanoparticles with surface-adsorbed proteins, functionalized or not with the drug. It was shown that bare NPs (i.e., NPs not surface-functionalized with proteins) without the drug exhibited significant permeability and cellular uptake, which were further enhanced by NP surface functionalization with α2-macroglobulin. However, the presence of the drug at the polymer chain-end prevented efficient passage of all types of NPs through the BBB model, likely due to adecrease in the hydrophobicity of the nanoparticle surface and alteration of the protein binding/coupling, respectively. These results established a new and facile synthetic approach for the surface-functionalization of polymer nanoparticles for brain delivery purposes.

Cu(0)-RDRP as an efficient and low-cost synthetic route to blue-emissive polymers for OLEDs

Cu(0)-RDRP has been used to prepare deep-blue emissive polymers for OLEDs using a simple room-temperature procedure with copper wire catalyst.

Carborane RAFT agents as tunable and functional molecular probes for polymer materials

Carborane RAFT agents are introduced as tunable multi-purpose tools acting as ¹H NMR spectroscopic handles, Raman probes, and recognition units.

Degradable polymer prodrugs with adjustable activity from drug-initiated radical ring-opening copolymerization

Degradable polymer prodrugs based on gemcitabine (Gem) as an anticancer drug were synthesized by 'drug-initiated' nitroxide-mediated radical ring-opening copolymerization (NMrROP) of methacrylic esters and 2-methylene-4-phenyl-1,3-dioxolane (MPDL). Different structural parameters were varied to determine the best biological performances: the nature of the monomer [i.e., oligo(ethylene glycol) methacrylate (OEGMA) or methyl methacrylate (MMA)], the nature of the Gem-polymer linker (i.e., amide or amide and diglycolate) and the MPDL content in the copolymer. Depending on the nature of the methacrylate monomer, two small libraries of water-soluble copolymer prodrugs and nanoparticles were obtained (M n ∼10 000 g mol-1, Đ = 1.1-1.5), which exhibited tunable hydrolytic degradation under accelerated conditions governed by the MPDL content. Drug-release profiles in human serum and in vitro anticancer activity on different cell lines enabled preliminary structure-activity relationships to be established. The cytotoxicity was independently governed by: (i) the MPDL content - the lower the MPDL content, the greater the cytotoxicity; (ii) the nature of the linker - the presence of a labile diglycolate linker enabled a greater Gem release compared to a simple amide bond and (iii) the hydrophilicity of the methacrylate monomer-OEGMA enabled a greater anticancer activity to be obtained compared to MMA-based polymer prodrugs. Remarkably, the optimal structural parameters enabled reaching the cytotoxic activity of the parent (free) drug.

Advances in luminescent materials with aggregation-induced emission (AIE) properties for biomedical applications

Fluorescent materials have recently received great attention in biomedical research because of their good optical properties, species diversity and high sensitivity. However, most of the traditional fluorophores suffer from the aggregation-caused quenching (ACQ) effect at high concentration or in the aggregated state, which has greatly limited their biomedical applications. Fluorescent materials with the AIE effect show exactly the opposite effect to the ACQ effect, and have exhibited significant advantages in terms of tunable emission, excellent photostability and biocompatibility. In this review, we summarize current advances of AIE-based materials for biomedical applications. In particular, AIE-active biosensors for detecting biomolecules, such as hydrogen peroxide, hydrogen sulfide, biothiols and enzymes, have been summarized. Moreover, AIE-based materials applied for bioimaging, drug delivery and cancer theranostics have also been described in detail. In the last section, the future prospects and possible challenges in the development of AIE-based materials are discussed briefly.

AIE-Active Polyamide Containing Diphenylamine-TPE Moiety with Superior Electrofluorochromic Performance

Electrofluorochromism has attracted great attention due to the intelligence optoelectronic and sensing applications. The intrinsically switchable fluorophores with high solid-state fluorescence are regarded as key for ideal electrofluorochromic materials. Here, we reported an AIE-active polyamide with diphenylamine and tetraphenylethylene units, showing high fluorescence quantum yield up to 69.1% for the solid polymer film and stable electrochemical cycling stability. The polyamide exhibited reversible color and emission switching even in hundreds of cycles, and the fluorescence on/off contrast ratio was determined up to 417, which is the highest value to our knowledge. Furthermore, as the response time is vital for the real-life applications, to speed up the response of electrofluorochromism, a porous polymer film was readily prepared through a facile method, notably exhibiting high fluorescence contrast, long-term stability and obviously improved response, due to the sharply increased surface area. Therefore, the AIE-functionalization combining the porous structure strategy will synergistically and dramatically improve the electrofluorochromic performance, which will also promote their practical applications in the near future.

Functional 1,8-Naphthalimide AIE/AIEEgens: Recent Advances and Prospects

This comprehensive review surveys the up-to-date development of aggregation-induced emission/aggregation-induced emission enhancement (AIE/AIEE) active naphthalimide (NI)-based smart materials with potential for wide and real-world applications and that serves as a highly versatile building block with tunable absorption and emission in the complete visible region. The review article commences with a precise description of the importance of NI moiety and its several restricted area of applications owing to its aggregation caused quenching (ACQ) properties, followed by the discovery and importance of AIE/AIEE-active NIs. The introduction section tracked an overview of the state of the art in NI luminogens in multiple applications. It also includes a few mechanistic studies on the structure-property correlation of NIs and provides more insights into the condensed-state photophysical properties of small aggregation-prone systems. The review aims to ultimately accomplish current and forthcoming views comprising the use of the NIs for the detection of biologically active molecules, such as amino acids and proteins, recognition of toxic analytes, fabrication of light emitting diodes, and their potential in therapeutics and diagnostics.

Self-stabilized, hydrophobic or PEGylated paclitaxel polymer prodrug nanoparticles for cancer therapy

Facile derivatization of paclitaxel (Ptx) and subsequent “drug-initiated” synthesis of well-defined Ptx-polymer prodrugs was performed from nitroxide-mediated polymerization or reversible addition–fragmentation chain transfer polymerization.

Polyacrylic esters with a “one-is-enough” effect and investigation of their AIEE behaviours and cyanide detection in aqueous solution

Four end-functionalized polymers bearing chains with different hydrophilicities were successfully synthesized using a red-light emitting initiator via atom transfer radical polymerization (ATRP).

Telechelic polymers from reversible-deactivation radical polymerization for biomedical applications

Strategies for the synthesis of telechelic polymers by reversible-activation radical polymerization for biomedical applications are covered spanning from drug delivery and targeting to theranostics and sensing.

Structure–cytotoxicity relationship of drug-initiated polymer prodrug nanoparticles

Cladribine (CdA)-based polymer prodrug nanoparticles were obtained by “drug-initiated” RAFT polymerization of squalenyl methacrylate (SqMA) from two different CdA-bearing chain transfer agents (CTAs) to evaluate the influence of the nature of the linkage between CdA and the CTA, and the bulkiness of the polymer, on the drug release and the biological performance.

An AIE-based fluorescent test strip for the portable detection of gaseous phosgene

An AIE-based ratiometric fluorescent test strip was developed for portable point-of-use detection of gaseous phosgene.