A dual-channel sensor array for discrimination of biothiols based on manganese dioxide nanosheets

A dual-signal sensor array for highly sensitive identification of biothiols is reported based on different optical responses of MnO₂/curcumin (CUR) system to different biothiols. The addition of MnO₂ nanosheets (MnO₂ NSs) quenches the fluorescence of CUR, and the color of the mixture changes from yellow to brown. In the presence of reductive biothiols, MnO₂ NSs are etched and lose their fluorescence quenching ability, resulting in an increase in the fluorescence intensity of CUR at 540 nm and a decrease in the absorbance at 430 nm. The sensor array generates specific response modes based on the varying reduction abilities of different biothiols, which can be distinguished by linear discriminant analysis (LDA). The sensor array successfully distinguished five biothiols (glutathione (GSH), dithiothreitol (DTT), cysteine (Cys), mercaptoethanol (ME), and homocysteine (Hcy)) across a wide concentration range (1 μM-100 μM) and biothiol mixtures with varing molar ratios.

Sodium Borohydride Treatment to Prepare Manganese Oxides with Oxygen Vacancy Defects for Efficient Oxygen Reduction

Manganese oxides are often used as catalysts for oxygen reduction reactions due to their low price and high stability, and they have been extensively studied. However, the poor electrical conductivity and low intrinsic activity of manganese oxides restrict its application in oxygen reduction. In this paper, the manganese oxide octahedral molecular sieve is used as the research object, and the oxygen reduction performance of the material is adjusted by the surface reduction etching treatment of sodium borohydride. After being treated with 8 mmol/L sodium borohydride, the oxygen vacancy content of the manganese oxide octahedral molecular sieve was 26%. The manganese oxide octahedral molecular sieve showed the best performance, and its half-wave potential was 0.821 V. Tests show that the material has excellent electrical conductivity and high oxygen reduction kinetics. The generation of appropriate oxygen vacancies on the surface directly improves the chemical properties of the material surface, regulates the ratio of Mn3+/Mn4+ on the surface of the nanorod, and increases the oxygen reduction adsorption sites on the surface of the material. On the other hand, the electrical conductivity of the material is adjusted to increase the electron transfer rate during the oxygen reduction process, thereby enhancing the oxygen reduction activity.

A two fluorescent signal indicator-based ratio fluorometric alkaline phosphatase assay based on one signal precursor

Two fluorescent signal indicators were simply converted from one organic precursor system by using the superior oxidation capability of manganese dioxide (MnO2) nanosheets for the first time, finally resulting in the successful fabrication of a ratio fluorometric bioassay of alkaline phosphatase (ALP).

Highly catalytically active CeO2-x-based heterojunction nanostructures with mixed micro/meso-porous architectures

The architectural design of nanocatalysts plays a critical role in the achievement of high densities of active sites but current technologies are hindered by process complexity and limited scaleability. The present work introduces a rapid, flexible, and template-free method to synthesize three-dimensional (3D), mesoporous, CeO_2-x nanostructures comprised of extremely thin holey two-dimensional (2D) nanosheets of centimetre-scale. The process leverages the controlled conversion of stacked nanosheets of a newly developed Ce-based coordination polymer into a range of stable oxide morphologies controllably differentiated by the oxidation kinetics. The resultant polycrystalline, hybrid, 2D-3D CeO_2-x exhibits high densities of defects and surface area as high as 251 m² g^-1, which yield an outstanding CO conversion performance (T_90% = 148 °C) for all oxides. Modification by the creation of heterojunction nanostructures using transition metal oxides (TMOs) results in further improvements in performance (T_90% = 88 °C), which are interpreted in terms of the active sites associated with the TMOs that are identified through structural analyses and density functional theory (DFT) simulations. This unparalleled catalytic performance for CO conversion is possible through the ultra-high surface areas, defect densities, and pore volumes. This technology offers the capacity to establish efficient pathways to engineer nanostructures of advanced functionalities for catalysis.

Oriented-Redox Induced Uniform MnO2 Coating on Ni3S2 Nanorod Arrays as a Stable Anode for Enhanced Performances of Lithium Ion Battery

Cost-effective transition metal chalcogenides have aroused wide consideration as alternative anode materials in lithium ion batteries (LIBs) on account of their elevated lithium activity and considerable theoretical capacity. However, the significant challenge caused by the large volume change and shuttle effect of polysulfides during Li ion insertion/extraction severely restricts their practical application. In this work, the uniform MnO₂ coating layer with a tunable thickness on Ni₃S₂ nanorod arrays has been achieved through a mild oriented-redox reaction by taking advantage of the mixing valence of Ni in Ni₃S₂ [(Ni²⁺)₂(Ni⁰)(S^2-)₂]. The core/shell structured nanorod arrays directly used as anode materials of LIBs demonstrate remarkably improved lithium storage performance including high rate capacity and long cycle life, which deliver a discharge capacity of 662 mA h g^-1 for 150 cycles at 0.5 C, corresponding to an elevated capacity retention of 90.7%. The improved electrochemical performances can be assigned to the generation of stable solid electrolyte interface films and suppression of the shuttle behavior with the protection of the MnO₂ coating layer on Ni₃S₂ nanorod arrays.

A dual-mode resonance Rayleigh scattering and colorimetric alkaline phosphatase assay based on in situ ascorbic acid-induced signal generation from manganese dioxide nanosheets

Multimode sensing has attracted extensive attention because they provide more than one transduction channel, thus improving accuracy and sensitivity. Due to the structural diversity, MnO2 nanosheets and nanoneedles were successively obtained via one-step redox reaction and different self-assembly methods. MnO2 nanosheets possess outstanding optical properties including extremely strong resonance Rayleigh scattering (RRS) and absorbance signal, and were selected as a dual-mode sensing material. Inspired by the selectivity of alkaline phosphatase (ALP) towards dephosphorylate ascorbic acid 2-phosphate (AAP) to generate ascorbic acid (AA), which has the ability to decompose MnO2 nanosheets along with optical signals and colour change, a dual-mode optical ALP sensing platform has been designed. Therefore, MnO2 nanosheets can serve as colorimetric probes by directly visualizing the colour variation with bare eyes. Moreover, the detection limit obtained by the RRS sensing mode can be as low as 0.17 mU L-1, which is far superior to that obtained by previously reported methods. The strategy not only has good feasibility and sensitivity, but also shows good prospects for a series of ALP-extended sensing applications.

Competitive redox reaction of Au-NCs/MnO2 nanocomposite: Toward colorimetric and fluorometric detection of acid phosphatase as an indicator of soil cadmium contamination

In this study, by rational regulating the competitive redox reaction of Au-NCs/MnO₂ nanocomposite between the dye indigo carmine (IC) and the enzymatic product L-ascorbic acid (AA), we have established a colorimetric and fluorometric double-channel responsive assay for acid phosphatase (ACP), which could serve as an indicator of soil cadmium (Cd) contamination. Initially, the gold nanoclusters (Au-NCs) were added to the suspension of MnO₂ nanosheets to form Au-NCs/MnO₂ nanocomposite with enhanced oxidative degradation ability. When IC was subsequently added, the blue color of IC faded due to oxidative degradation, and the mixture showed the yellow color of Au-NCs/MnO₂ nanocomposite. Meanwhile, based on the inner filter effect (IFE), the fluorescence of Au-NCs was suppressed by MnO₂ nanosheets during this process. However, with the presence of AA, hydrolyzed from L-ascorbic-2-phosphate (AAP) by ACP, the MnO₂ nanosheets in Au-NCs/MnO₂ nanocomposite were reduced to Mn²⁺ immediately. As a consequence, IC remained its blue color, in the meantime, the fluorescence of Au-NCs recovered, which essentially constituted a new mechanism for ACP detection with colorimetric and fluorometric double-channel response. With the method we developed, soil ACP activity can either be directly visualized by bare eyes or detected reliably through double channels. Furthermore, the dynamic changes of ACP activity during soil Cd contamination could also be monitored; the sharp increase of ACP activity at an appropriate time point could serve as a unique alarm for cadmium (Cd) contamination in soil, which is of great importance for soil quality evaluation and ecological risk assessment.

Mesostructured Carbon Nanotube-on-MnO2 Nanosheet Composite for High-Performance Supercapacitors

Carbon nanomaterials have been widely used to enhance the performance of MnO₂-based supercapacitors. However, it still remains a challenge to directly fabricate high combining strength, mesostructured and high-performance MnO₂/carbon nanotube (CNT)-nanostructured composite electrodes with a little weight percentage of carbon materials. Here, we report a novel mesostructured composite of the CNT-on-MnO₂ nanosheet with a high MnO₂ percentage, which consists of vertically aligned MnO₂ nanosheets with nanopores and in situ formed oriented CNTs on MnO₂ nanosheets (tube-on-sheet). The optimized CNTs/MnO₂ possesses favorable features, namely, vertically aligned nanosheets to shorted ion diffusion path, a hierarchical porous structure for increased specific surface areas and active sites, and in situ formed CNTs for enhanced conductivity and robust structural stability. It is found that the unique tube-on-sheet CNTs/MnO₂ nanocomposites with the high MnO₂ percentage (>90 wt %) exhibit a high specific capacity of 1131 F g^-1 based on total electrodes and 1229 F g^-1 based on MnO₂ at a current density of 1 A g^-1, high rate capability, and ultrastable cycling life (94.4%@10 000 cycles). This electrode design strategy in this paper demonstrates a new way for high-performance electrodes for supercapacitors with high active material percentage.

R-Ras C-terminal sequences are sufficient to confer R-Ras specificity to H-Ras

Activated versions of the similar GTPases, H-Ras and R-Ras, have differing effects on biological phenotypes: Activated H-Ras strongly transforms many fibroblast cell lines causing dramatic changes in cell shape and cytoskeletal organization. In contrast, R-Ras transforms fewer cell lines and the transformed cells display only some of the morphological changes associated with H-Ras transformation. H-Ras cells can survive in the absence of serum whereas R-Ras cells seem to die by an apoptotic-like mechanism in response to removal of serum. H-Ras can suppress integrin activation and R-Ras specifically antagonizes this effect. To map sequences responsible for these differences we have generated and investigated a panel of H-Ras and R-Ras chimeras. We found that the C-terminal 53 amino acids of R-Ras were necessary and sufficient to specify the contrasting biological properties of R-Ras with respect to focus morphology, reactive oxygen species (ROS) production and reversal of H-Ras-induced integrin suppression. Surprisingly, we found chimeras in which the focus formation and integrin-mediated phenotypes were separated, suggesting that different effectors could be involved in mediating these responses. An integrin profile of H-Ras and R-Ras cell pools showed no significant differences; both activated H-Ras and R-Ras expressing cells were found to have reduced beta(1) activity, suggesting that the activity state of the beta(1) subunit is not sufficient to direct an H-Ras transformed cell morphology.