Vanadium MXenes materials for next-generation energy storage devices

Batteries and supercapacitors have emerged as promising candidates for next-generation energy storage technologies. The rapid development of new two-dimensional (2D) electrode materials indicates a new era in energy storage devices. MXenes are a new type of layered 2D transition metal carbides, nitrides, or carbonitrides that have drawn much attention because of their excellent electrical conductivity, electrochemical and hydrophilic properties, large surface area, and attractive topological structure. This review focuses on various synthesis methods to prepare vanadium carbide MXenes with and without etchants like hydrofluoric acid, lithium fluoride, and hydrochloric acid to remove the 'A' layers of the MAX phase. The goal is to demonstrate the utilization of a less toxic etching method to achieve MXenes of comparable properties to those prepared by traditional methods. The influence of intercalation on the effect of high interlayer spacing between the MXene layers and the performance of MXenes as supercapacitor and battery electrodes is also addressed in this review. Lastly, the gaps in the current knowledge for vanadium carbide MXenes in synthesis, scalability, and utilization in more energy storage devices were discussed.

Synthesis and Characterization of Ni-Pt Alloy Thin Films Prepared by Supercritical Fluid Chemical Deposition Technique

Ni-Pt alloy thin films have been successfully synthesized and characterized; the films were prepared by the supercritical fluid chemical deposition (SFCD) technique from Ni(hfac)₂·3H₂O and Pt(hfac)₂ precursors by hydrogen reduction. The results indicated that the deposition rate of the Ni-Pt alloy thin films decreased with increasing Ni content and gradually increased as the precursor concentration was increased. The film peaks determined by X-ray diffraction shifted to lower diffraction angles with decreasing Ni content. The deposited films were single-phase polycrystalline Ni-Pt solid solution and it exhibited smooth, continuous, and uniform distribution on the substrate for all elemental compositions as determined by scanning electron microscopy and scanning transmission electron microscopy analyses. In the X-ray photoelectron spectroscopy (XPS) analysis, the intensity of the Pt 4f peaks of the films decreased as the Ni content increased, and vice versa for the Ni 2p peak intensities. Furthermore, based on the depth profiles determined by XPS, there was no evidence of atomic diffusion between Pt and Ni, which indicated alloy formation in the film. Therefore, Ni-Pt alloy films deposited by the SFCD technique can be used as a suitable model for catalytic reactions due to their high activity and good stability for various reactions.

Carbon supported Pt–Ni octahedral electrocatalysts as a model to monitor nickel corrosion and particle detachment

Pt–Ni oxygen reduction reaction catalyst are reacted with chelating agents to model their stability in a fuel cell. All chelating agents do show Ni dealloying and we discovered that amino-rich chelates do also detach the NPs from the carbon support.

Rapid synthesis of hollow PtPdCu trimetallic octahedrons at room temperature for oxygen reduction reactions in acid media

Hollow PtPdCu trimetallic octahedrons were prepared under mild conditions, exhibiting enhanced activity toward the oxygen reduction reaction in acid media.

Recent advances in electrocatalysts toward the oxygen reduction reaction: the case of PtNi octahedra

Designing highly efficient and durable electrocatalysts for the oxygen reduction reaction (ORR), the key step for the operation of polymer electrolyte membrane fuel cells (PEMFCs), is of a pivotal importance for advancing PEMFC technology. Since the most significant progress has been made on Pt3Ni(111) alloy surfaces, nanoscale PtNi alloy octahedra enclosed by (111) facets have emerged as promising electrocatalysts toward the ORR. However, because their practical uses have been hampered by the cost, sluggish reaction kinetics, and poor durability, recent advances have engendered a wide variety of structure-, size-, and composition-controlled bimetallic PtNi octahedra. Herein, we therefore review the important recent developments of PtNi octahedral electrocatalysts point by point to give an overview of the most promising strategies. Specifically, the present review article focuses on the synthetic methods for the PtNi octahedra, the core-shell and multi-metallic strategies for performance improvement, and their structure-, size-, and composition-control-based ORR activity. By considering the results achieved in this field, a prospect for this alloy nanocatalysts system for future sustainable energy applications is also proposed.

Radially Phase Segregated PtCu@PtCuNi Dendrite@Frame Nanocatalyst for the Oxygen Reduction Reaction

Pt-based alloy nanoframes have shown great potential as electrocatalysts toward the oxygen reduction reaction (ORR) in fuel cells. However, the intrinsically infirm nanoframes could be severely deformed during extended electro-cyclings, which eventually leads to the loss of the initial catalytic activity. Therefore, the structurally robust nanoframe is a worthy synthetic target. Furthermore, ternary alloy phase electrocatalysts offer more opportunities in optimizing the stability and activity than binary alloy ones. Herein, we report a robust PtCuNi ternary nanoframe, structurally fortified with an inner-lying PtCu dendrite, which shows a highly active and stable catalytic performance toward ORR. Remarkably, the PtCu@PtCuNi catalyst exhibited 11 and 16 times higher mass and specific activities than those of commercial Pt/C.

One-pot synthesis of dendritic Pt3Ni nanoalloys as nonenzymatic electrochemical biosensors with high sensitivity and selectivity for dopamine detection

Preparation of Pt-based nanocatalysts with high catalytic activity and exploration of their novel applications have attracted significant interest in the nanoscale field. Herein, we report a facile synthesis of dendritic Pt₃Ni nanoalloys and their applications for electrochemical nonenzymatic dopamine biosensors. As a result of their unique structure, the dendritic Pt₃Ni nanoalloys show high electrocatalytic activity towards dopamine oxidation. Amperometric dopamine biosensors based on dendritic Pt₃Ni nanoalloy microelectrode exhibit a wide linear detection ranges from 0.5 μM to 250 μM with ultrahigh sensitivity, fast response, and excellent selectivity at a potential of 0.3 V in a 0.1 M phosphate buffered solution (pH = 7.2). The limit of detection on dendritic Pt₃Ni nanoalloy microelectrodes can decrease down to 10 nM, which is the least concentration of dopamine in serum samples with a value of sensitivity up to 4.6 μA mg^-1_Pt cm^-2. This study shows an effective approach for the development of dendritic Pt₃Ni nanoalloys as electrocatalysts for electrochemical nonenzymatic dopamine biosensors.