Molten fatty acid based microemulsions

Investigating the morphological transitions in an associative surfactant ternary system

Associative surfactants systems involving polar oils have recently been shown to stabilize immiscible liquids by forming nanostructures at the liquid interface and have been used to print soft materials. Although these associating surfactant systems show great promise for creating nanostructured soft materials, a fundamental understanding of the self-assembly process is still unknown. In this study, a ternary phase diagram for a system of cationic surfactant cetylpyridinium chloride monohydrate (CPCl), a polar oil (oleic acid), and water is established using experiment and simulation, to study the equilibrium phase behavior. A combination of visual inspection, small-angle X-ray scattering (SAXS), and rheological measurements was employed to establish the phase behavior and properties of the self-assembled materials. Dissipative particle dynamics (DPD) is used to simulate the formation of the morphologies in this system and support the experimental results. The ternary phase diagram obtained from the simulations agrees with the experimental results, indicating the robustness of the computational simulation as a supplement to the mesoscale experimental systems. We observe that morphological transitions (e.g., micelle-to-bilayer and vesicle-to-lamellar) are in agreement between experiments and simulations across the ternary diagram. DPD simulations correctly predict that associative surfactant systems form new nanoscale phases due to the co-assembly of the components. The established ternary phase diagram and the DPD model pave the way towards predicting and controlling the formation of different mesostructures like lamellar or vesicles, opening new avenues to tailor and synthesize desired morphologies for applications related to liquid-in-liquid 3D printing.

Fabricating Robust Constructs with Internal Phase Nanostructures via Liquid-in-Liquid 3D Printing

The ability to print soft materials into predefined architectures with programmable nanostructures and mechanical properties is a necessary requirement for creating synthetic biomaterials that mimic living tissues. However, the low viscosity of common materials and lack of required mechanical properties in the final product present an obstacle to the use of traditional additive manufacturing approaches. Here, a new liquid-in-liquid 3D printing approach is used to successfully fabricate constructs with internal nanostructures using in situ self-assembly during the extrusion of an aqueous solution containing surfactant and photocurable polymer into a stabilizing polar oil bath. Subsequent photopolymerization preserves the nanostructures created due to surfactant self-assembly at the immiscible liquid-liquid interface, which is confirmed by small-angle X-ray scattering. Mechanical properties of the photopolymerized prints are shown to be tunable based on constituent components of the aqueous solution. The reported 3D printing approach expands the range of low-viscosity materials that can be used in 3D printing, and enables robust constructs production with internal nanostructures and spatially defined features. The reported approach has broad applications in regenerative medicine by providing a platform to print self-assembling biomaterials into complex tissue mimics where internal supramolecular structures and their functionality control biological processes, similar to natural extracellular matrices.

Rapid Stabilization of Immiscible Fluids using Nanostructured Interfaces via Surfactant Association

Surfactant molecules have been extensively used as emulsifying agents to stabilize immiscible fluids. Droplet stability has been shown to be increased when ordered nanoscale phases form at the interface of the two fluids due to surfactant association. Here, we report on using mixtures of a cationic surfactant and long chained alkenes with polar head groups [e.g., cetylpyridinium chloride (CPCl) and oleic acid] to create an ordered nanoscale lamellar morphology at aqueous-oil interfaces. The self-assembled nanostructure at the liquid-liquid interface was characterized using small-angle x-ray scattering, and the mechanical properties were measured using interfacial rheology. We hypothesize that the resulting lamellar morphology at the liquid-liquid interface is driven by the change in critical packing parameter when the CPCl molecules are diluted by the presence of the long chain alkenes with polar head groups, which leads to a spherical micelle-to-lamellar phase transition. The work presented here has larger implications for using nanostructured interfacial material to separate different fluids in flowing conditions for biosystems and in 3D printing technology.

A Comparison Study on the Phase Behavior and Solubilization between Cn(Bim)2-2Br-Butyric Acid and CnmimBr-Butyric Acid Microemulsion Systems

The solubility, interfacial composition and solubilization ability of microemulsions containing gemini 1,4-bis(3-alkylimidazolium-1-yl) butane bromide [Cn(Bim)2-2Br]/butyric acid were studied and compared with that of microemulsions containing 1-alkyl-3-methylimidazolium (CnmimBr)/butyric acid. The solubilities of butyric acid (SA), and the mass fractions of butyric acid in the interfacial layer(AS) decrease, while the solubilization parameters (SP*) increase with the increase in the carbon chain length of the surfactants in Cn(Bim)2-2Br based and CnmimBr based microemulsions. A comparison of the gemini Cn(Bim)2-2Br microemulsions with CnmimBr microemulsions indicates that the values of SA and AS are in the order: Cn(Bim)2-2Br < CnmimBr, while SP* values are Cn(Bim)2-2Br > CnmimBr. With salinity increasing, the values of SA and AS decrease, while SP* values increase. With the increase in the alkyl chain length of the oil molecules, the SA values increase, AS and SP* values decrease. Temperature has less influence on the values of SA, AS and SP* of microemulsions containing Cn(Bim)2-2Br/butyric acid.

Nanostructure Changes upon Polymerization of Aqueous and Organic Phases in Organized Mixtures

The nanostructure of a microemulsion can be strongly affected by the liquid-to-solid transition during polymerization. Here, we examined the evolution of nanostructures of different ternary mixtures, including two microemulsions and a single lamellar phase that upon polymerization are quantitatively studied by SAXS/WAXS and DSC experiments systematically performed before and after the polymerization of both aqueous and organic phases. Samples are mixtures of the poly(2-acrylamido-2-methylpropanesulfonic acid) network as the aqueous phase and poly(hexyl methacrylate) as the organic phase stabilized by Brij35 surfactant. Upon polymerization, the surfactant is excluded from the water/oil interface and crystallizes, strongly changing the nanostructure of samples where it is the main component. In samples where the aqueous phase is the main component, only a few changes in structure are observed upon polymerization. This study demonstrates quantitatively the possibility to preserve nanostructures during polymerization, thus inducing a templating effect.