1
|
Honaryar H, LaNasa JA, Hickey RJ, Shillcock JC, Niroobakhsh Z. Investigating the morphological transitions in an associative surfactant ternary system. Soft Matter 2022; 18:2611-2633. [PMID: 35297452 DOI: 10.1039/d1sm01668g] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Associative surfactants systems involving polar oils have recently been shown to stabilize immiscible liquids by forming nanostructures at the liquid interface and have been used to print soft materials. Although these associating surfactant systems show great promise for creating nanostructured soft materials, a fundamental understanding of the self-assembly process is still unknown. In this study, a ternary phase diagram for a system of cationic surfactant cetylpyridinium chloride monohydrate (CPCl), a polar oil (oleic acid), and water is established using experiment and simulation, to study the equilibrium phase behavior. A combination of visual inspection, small-angle X-ray scattering (SAXS), and rheological measurements was employed to establish the phase behavior and properties of the self-assembled materials. Dissipative particle dynamics (DPD) is used to simulate the formation of the morphologies in this system and support the experimental results. The ternary phase diagram obtained from the simulations agrees with the experimental results, indicating the robustness of the computational simulation as a supplement to the mesoscale experimental systems. We observe that morphological transitions (e.g., micelle-to-bilayer and vesicle-to-lamellar) are in agreement between experiments and simulations across the ternary diagram. DPD simulations correctly predict that associative surfactant systems form new nanoscale phases due to the co-assembly of the components. The established ternary phase diagram and the DPD model pave the way towards predicting and controlling the formation of different mesostructures like lamellar or vesicles, opening new avenues to tailor and synthesize desired morphologies for applications related to liquid-in-liquid 3D printing.
Collapse
Affiliation(s)
- Houman Honaryar
- Department of Civil & Mechanical Engineering, University of Missouri-Kansas City, Kansas City, Missouri 64110, USA.
| | - Jacob A LaNasa
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, Pennsylvania 16802, USA
| | - Robert J Hickey
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, Pennsylvania 16802, USA
- Materials Research Institute, Pennsylvania State University, University Park, Pennsylvania 16802, USA
| | - Julian C Shillcock
- Laboratory of Molecular and Chemical Biology of Neurodegeneration, École polytechnique fédérale de Lausanne (EPFL), CH-1015 Lausanne, Switzerland
- Blue Brain Project, École polytechnique fédérale de Lausanne (EPFL), Campus Biotech, Geneva 1202, Switzerland
| | - Zahra Niroobakhsh
- Department of Civil & Mechanical Engineering, University of Missouri-Kansas City, Kansas City, Missouri 64110, USA.
| |
Collapse
|
2
|
Honaryar H, LaNasa JA, Lloyd EC, Hickey RJ, Niroobakhsh Z. Fabricating Robust Constructs with Internal Phase Nanostructures via Liquid‐in‐Liquid 3D Printing. Macromol Rapid Commun 2021. [DOI: 10.1002/marc.202170073] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
3
|
Honaryar H, LaNasa JA, Lloyd EC, Hickey RJ, Niroobakhsh Z. Fabricating Robust Constructs with Internal Phase Nanostructures via Liquid-in-Liquid 3D Printing. Macromol Rapid Commun 2021; 42:e2100445. [PMID: 34569682 DOI: 10.1002/marc.202100445] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/13/2021] [Revised: 09/21/2021] [Indexed: 12/12/2022]
Abstract
The ability to print soft materials into predefined architectures with programmable nanostructures and mechanical properties is a necessary requirement for creating synthetic biomaterials that mimic living tissues. However, the low viscosity of common materials and lack of required mechanical properties in the final product present an obstacle to the use of traditional additive manufacturing approaches. Here, a new liquid-in-liquid 3D printing approach is used to successfully fabricate constructs with internal nanostructures using in situ self-assembly during the extrusion of an aqueous solution containing surfactant and photocurable polymer into a stabilizing polar oil bath. Subsequent photopolymerization preserves the nanostructures created due to surfactant self-assembly at the immiscible liquid-liquid interface, which is confirmed by small-angle X-ray scattering. Mechanical properties of the photopolymerized prints are shown to be tunable based on constituent components of the aqueous solution. The reported 3D printing approach expands the range of low-viscosity materials that can be used in 3D printing, and enables robust constructs production with internal nanostructures and spatially defined features. The reported approach has broad applications in regenerative medicine by providing a platform to print self-assembling biomaterials into complex tissue mimics where internal supramolecular structures and their functionality control biological processes, similar to natural extracellular matrices.
Collapse
Affiliation(s)
- Houman Honaryar
- Department of Civil & Mechanical Engineering, University of Missouri-Kansas City, Kansas City, MO, 64110, USA
| | - Jacob A LaNasa
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, PA, 16802, USA
| | - Elisabeth C Lloyd
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, PA, 16802, USA
| | - Robert J Hickey
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, PA, 16802, USA.,Materials Research Institute, Pennsylvania State University, University Park, PA, 16802, USA
| | - Zahra Niroobakhsh
- Department of Civil & Mechanical Engineering, University of Missouri-Kansas City, Kansas City, MO, 64110, USA
| |
Collapse
|
4
|
LaNasa JA, Neuman A, Riggleman RA, Hickey RJ. Investigating Nanoparticle Organization in Polymer Matrices during Reaction-Induced Phase Transitions and Material Processing. ACS Appl Mater Interfaces 2021; 13:42104-42113. [PMID: 34432429 DOI: 10.1021/acsami.1c14830] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Controlling nanoparticle organization in polymer matrices has been and is still a long-standing issue and directly impacts the performance of the materials. In the majority of instances, simply mixing nanoparticles and polymers leads to macroscale aggregation, resulting in deleterious effects. An alternative method to physically blending independent components such as nanoparticle and polymers is to conduct polymerizations in one-phase monomer/nanoparticle mixtures. Here, we report on the mechanism of nanoparticle aggregation in hybrid materials in which gold nanoparticles are initially homogeneously dispersed in a monomer mixture and then undergo a two-step aggregation process during polymerization and material processing. Specifically, oleylamine-functionalized gold nanoparticles (AuNP) are first synthesized in a methyl methacrylate (MMA) solution and then subsequently polymerized by using a free radical polymerization initiated with azobis(isobutyronitrile) (AIBN) to create hybrid AuNP and poly(methyl methacrylate) (PMMA) materials. The resulting products are easily pressed to obtain bulk films with nanoparticle organization defined as either well-dispersed or aggregated. Polymerizations are performed at various temperatures (T) and MMA volume fractions (ΦMMA) to systematically influence the final nanoparticle dispersion state. During the polymerization of MMA and subsequent material processing, the initially homogeneous AuNP/MMA mixture undergoes macrophase separation between PMMA and oleylamine during the polymerization, yet the AuNP are dispersed in the oleylamine phase. The nanoparticles then aggregate within the oleylamine phase when the materials are processed via vacuum drying and pressing. Nanoparticle organization is tracked throughout the polymerization and processing steps by using a combination of transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS). The resulting dispersion state of AuNPs in PMMA bulk films is ultimately dictated by the thermodynamics of mixing between the PMMA and oleylamine phases, but the mechanism of nanoparticle aggregation occurs in two steps that correspond to the polymerization and processing of the materials. Flory-Huggins mixing theory is used to support the PMMA and oleylamine phase separation. The reported results highlight how the integration of nonequilibrium processing and mean-field approximations reveal nanoparticle aggregation in hybrid materials synthesized by using reaction-induced phase transitions.
Collapse
Affiliation(s)
| | - Anastasia Neuman
- Department of Chemical and Biomolecular Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - Robert A Riggleman
- Department of Chemical and Biomolecular Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | | |
Collapse
|
5
|
Torres VM, LaNasa JA, Vogt BD, Hickey RJ. Controlling nanostructure and mechanical properties in triblock copolymer/monomer blends via reaction-induced phase transitions. Soft Matter 2021; 17:1505-1512. [PMID: 33355580 DOI: 10.1039/d0sm01661f] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Thermoplastic elastomers based on ABA triblock copolymers are typically limited in modulus and strength due to crack propagation within the brittle regions when the hard end-block composition favors morphologies that exhibit connected domains. Increasing the threshold end-block composition to achieve enhanced mechanical performance is possible by increasing the number of junctions or bridging points per chain, but these copolymer characteristics also tend to increase the complexity of the synthesis. Here, we report an in situ polymerization method to successfully increase the number of effective junctions per chain through grafting of poly(styrene) (PS) to a commercial thermoplastic elastomer, poly(styrene)-poly(butadiene)-poly(styrene) (SBS). The strategy described here transforms a linear SBS triblock copolymer-styrene mixture into a linear-comb-linear architecture in which poly(styrene) (PS) grafts from the mid-poly(butadiene) (PBD) block during the polymerization of styrene. Through systematic variation in the initial SBS/styrene content, nanostructural transitions from disordered spheres to lamellar through reaction-induced phase transitions (RIPT) were identified as the styrene content increased. Surprisingly, maximum mechanical performance (Young's modulus, tensile strength, and elongation at break) was obtained with samples exhibiting lamellar nanostructures, corresponding to overall PS contents of 61-77 wt% PS (including the original PS in SBS). The PS grafting from the PBD block increases the modulus and the strength of the thermoplastic elastomer while preventing brittle fracture due to the greater number of junctions afforded by the PS grafts. The work presented here demonstrates the use of RIPT to transform standard SBS materials into polymer systems with enhanced mechanical properties.
Collapse
Affiliation(s)
- Vincent M Torres
- Department of Chemistry, The Pennsylvania State University, University Park, Pennsylvania 16801, USA.
| | - Jacob A LaNasa
- Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16801, USA
| | - Bryan D Vogt
- Department of Chemical Engineering, The Pennsylvania State University, University Park, Pennsylvania 16801, USA
| | - Robert J Hickey
- Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16801, USA and Materials Research Institute, The Pennsylvania State University, University Park, Pennsylvania 16801, USA
| |
Collapse
|
6
|
LaNasa JA, Hickey RJ. Surface-Initiated Ring-Opening Metathesis Polymerization: A Method for Synthesizing Polymer-Functionalized Nanoparticles Exhibiting Semicrystalline Properties and Diverse Macromolecular Architectures. Macromolecules 2020. [DOI: 10.1021/acs.macromol.0c01381] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/15/2023]
Affiliation(s)
- Jacob A. LaNasa
- Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16801, United States
| | - Robert J. Hickey
- Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16801, United States
- Materials Research Institute, The Pennsylvania State University, University Park, Pennsylvania 16801, United States
| |
Collapse
|
7
|
Zofchak ES, LaNasa JA, Torres VM, Hickey RJ. Deciphering the Complex Phase Behavior during Polymerization-Induced Nanostructural Transitions of a Block Polymer/Monomer Blend. Macromolecules 2020. [DOI: 10.1021/acs.macromol.9b01695] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/02/2023]
|
8
|
Lang C, LaNasa JA, Utomo N, Xu Y, Nelson MJ, Song W, Hickner MA, Colby RH, Kumar M, Hickey RJ. Solvent-non-solvent rapid-injection for preparing nanostructured materials from micelles to hydrogels. Nat Commun 2019; 10:3855. [PMID: 31451686 PMCID: PMC6710291 DOI: 10.1038/s41467-019-11804-7] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/12/2019] [Accepted: 08/01/2019] [Indexed: 11/09/2022] Open
Abstract
Due to their distinctive molecular architecture, ABA triblock copolymers will undergo specific self-assembly processes into various nanostructures upon introduction into a B-block selective solvent. Although much of the focus in ABA triblock copolymer self-assembly has been on equilibrium nanostructures, little attention has been paid to the guiding principles of nanostructure formation during non-equilibrium processing conditions. Here we report a universal and quantitative method for fabricating and controlling ABA triblock copolymer hierarchical structures using solvent-non-solvent rapid-injection processing. Plasmonic nanocomposite hydrogels containing gold nanoparticles and hierarchically-ordered hydrogels exhibiting structural color can be assembled within one minute using this rapid-injection technique. Surprisingly, the rapid-injection hydrogels display superior mechanical properties compared with those of conventional ABA hydrogels. This work will allow for translation into technologically relevant areas such as drug delivery, tissue engineering, regenerative medicine, and soft robotics, in which structure and mechanical property precision are essential.
Collapse
Affiliation(s)
- Chao Lang
- Department of Materials Science & Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
- Department of Chemical Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
| | - Jacob A LaNasa
- Department of Materials Science & Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
| | - Nyalaliska Utomo
- Department of Materials Science & Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
| | - Yifan Xu
- Department of Materials Science & Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
| | - Melissa J Nelson
- Department of Materials Science & Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
| | - Woochul Song
- Department of Chemical Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
| | - Michael A Hickner
- Department of Materials Science & Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
- Materials Research Institute, The Pennsylvania State University, University Park, PA, 16802, USA
| | - Ralph H Colby
- Department of Materials Science & Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
- Materials Research Institute, The Pennsylvania State University, University Park, PA, 16802, USA
| | - Manish Kumar
- Department of Chemical Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.
- Materials Research Institute, The Pennsylvania State University, University Park, PA, 16802, USA.
- Department of Biomedical Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.
- Department of Civil and Environmental Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.
| | - Robert J Hickey
- Department of Materials Science & Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.
- Materials Research Institute, The Pennsylvania State University, University Park, PA, 16802, USA.
| |
Collapse
|
9
|
Lang C, Shen YX, LaNasa JA, Ye D, Song W, Zimudzi TJ, Hickner MA, Gomez ED, Gomez EW, Kumar M, Hickey RJ. Creating cross-linked lamellar block copolymer supporting layers for biomimetic membranes. Faraday Discuss 2019; 209:179-191. [PMID: 29972389 DOI: 10.1039/c8fd00044a] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
The long-standing goal in membrane development is creating materials with superior transport properties, including both high flux and high selectivity. These properties are common in biological membranes, and thus mimicking nature is a promising strategy towards improved membrane design. In previous studies, we have shown that artificial water channels can have excellent water transport abilities that are comparable to biological water channel proteins, aquaporins. In this study, we propose a strategy for incorporation of artificial channels that mimic biological channels into stable polymeric membranes. Specifically, we synthesized an amphiphilic triblock copolymer, poly(isoprene)-block-poly(ethylene oxide)-block-poly(isoprene), which is a high molecular weight synthetic analog of naturally occurring lipids in terms of its self-assembled structure. This polymer was used to build stacked membranes composed of self-assembled lamellae. The resulting membranes resemble layers of natural lipid bilayers in living systems, but with superior mechanical properties suitable for real-world applications. The procedures used to synthesize the triblock copolymer resulted in membranes with increased stability due to the crosslinkability of the hydrophobic domains. Furthermore, the introduction of bridging hydrophilic domains leads to the preservation of the stacked membrane structure when the membrane is in contact with water, something that is challenging for diblock lamellae that tend to swell, and delaminate in aqueous solutions. This new method of membrane fabrication offers a practical model for making channel-based biomimetic membranes, which may lead to technological applications in reverse osmosis, nanofiltration, and ultrafiltration membranes.
Collapse
Affiliation(s)
- Chao Lang
- Department of Chemical Engineering, The Pennsylvania State University, University Park, PA, 16802 USA.
| | | | | | | | | | | | | | | | | | | | | |
Collapse
|
10
|
Lang C, Ye D, Song W, Yao C, Tu YM, Capparelli C, LaNasa JA, Hickner MA, Gomez EW, Gomez ED, Hickey RJ, Kumar M. Biomimetic Separation of Transport and Matrix Functions in Lamellar Block Copolymer Channel-Based Membranes. ACS Nano 2019; 13:8292-8302. [PMID: 31251576 DOI: 10.1021/acsnano.9b03659] [Citation(s) in RCA: 22] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Cell membranes control mass, energy, and information flow to and from the cell. In the cell membrane a lipid bilayer serves as the barrier layer, with highly efficient molecular machines, membrane proteins, serving as the transport elements. In this way, highly specialized transport properties are achieved by these composite materials by segregating the matrix function from the transport function using different components. For example, cell membranes containing aquaporin proteins can transport ∼4 billion water molecules per second per aquaporin while rejecting all other molecules including salts, a feat unmatched by any synthetic system, while the impermeable lipid bilayer provides the barrier and matrix properties. True separation of functions between the matrix and the transport elements has been difficult to achieve in conventional solute separation synthetic membranes. In this study, we created membranes with distinct matrix and transport elements through designed coassembly of solvent-stable artificial (peptide-appended pillar[5]arene, PAP5) or natural (gramicidin A) model channels with block copolymers into lamellar multilayered membranes. Self-assembly of a lamellar structure from cross-linkable triblock copolymers was used as a scalable replacement for lipid bilayers, offering better stability and mechanical properties. By coassembly of channel molecules with block copolymers, we were able to synthesize nanofiltration membranes with sharp selectivity profiles as well as uncharged ion exchange membranes exhibiting ion selectivity. The developed method can be used for incorporation of different artificial and biological ion and water channels into synthetic polymer membranes. The strategy reported here could promote the construction of a range of channel-based membranes and sensors with desired properties, such as ion separations, stimuli responsiveness, and high sensitivity.
Collapse
|
11
|
Niroobakhsh Z, LaNasa JA, Belmonte A, Hickey RJ. Rapid Stabilization of Immiscible Fluids using Nanostructured Interfaces via Surfactant Association. Phys Rev Lett 2019; 122:178003. [PMID: 31107071 DOI: 10.1103/physrevlett.122.178003] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/14/2018] [Indexed: 06/09/2023]
Abstract
Surfactant molecules have been extensively used as emulsifying agents to stabilize immiscible fluids. Droplet stability has been shown to be increased when ordered nanoscale phases form at the interface of the two fluids due to surfactant association. Here, we report on using mixtures of a cationic surfactant and long chained alkenes with polar head groups [e.g., cetylpyridinium chloride (CPCl) and oleic acid] to create an ordered nanoscale lamellar morphology at aqueous-oil interfaces. The self-assembled nanostructure at the liquid-liquid interface was characterized using small-angle x-ray scattering, and the mechanical properties were measured using interfacial rheology. We hypothesize that the resulting lamellar morphology at the liquid-liquid interface is driven by the change in critical packing parameter when the CPCl molecules are diluted by the presence of the long chain alkenes with polar head groups, which leads to a spherical micelle-to-lamellar phase transition. The work presented here has larger implications for using nanostructured interfacial material to separate different fluids in flowing conditions for biosystems and in 3D printing technology.
Collapse
Affiliation(s)
- Zahra Niroobakhsh
- Department of Civil and Mechanical Engineering, University of Missouri-Kansas City, Kansas City, Missouri 64110, USA
| | - Jacob A LaNasa
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, Pennsylvania 16802, USA
| | - Andrew Belmonte
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, Pennsylvania 16802, USA
- Department of Mathematics, Pennsylvania State University, University Park, Pennsylvania 16802, USA
| | - Robert J Hickey
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, Pennsylvania 16802, USA
- Materials Research Institute, Pennsylvania State University, University Park, Pennsylvania 16802, USA
| |
Collapse
|
12
|
Abstract
Polymerization-induced structural transitions have gained attention recently due to the ease of creating and modifying nanostructured materials with controlled morphologies and length scales. Here, we show that order-order and disorder-order nanostructural transitions are possible using in situ polymer grafting from the diblock polymer, poly(styrene)-block-poly(butadiene). In our approach, we are able to control the resulting nanostructure (lamellar, hexagonally packed cylinders, and disordered spheres) by changing the initial block polymer/monomer ratio. The nanostructural transition occurs by a grafting from mechanism in which poly(styrene) chains are initiated from the poly(butadiene) block via the creation of an allylic radical, which increases the overall molecular weight and the poly(styrene) volume fraction. The work presented here highlights how the chemical process of converting standard linear diblock copolymers to grafted block polymers drives interesting and controllable polymerization-induced morphology transitions.
Collapse
|
13
|
Takahashi J, Higashi Y, LaNasa JA, Yoshida K, Winters SJ, Oshima H, Troen P. Studies of the human testis. XVIII. Simultaneous measurement of nine intratesticular steroids: evidence for reduced mitochondrial function in testis of elderly men. J Clin Endocrinol Metab 1983; 56:1178-87. [PMID: 6404920 DOI: 10.1210/jcem-56-6-1178] [Citation(s) in RCA: 49] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
Abstract
To determine the basis for the decline in testosterone production by the aged testis, intratesticular unconjugated steroids, including testosterone, pregnenolone (3 beta-hydroxy-5-pregnen-20-one), 17 alpha-hydroxypregnenolone (3 beta,17 alpha-dihydroxy-5-pregnen-20-one), dehydroepiandrosterone (3 beta-hydroxy-5-androsten-17-one), androstenediol (5-androstene-3 beta,17 beta-diol), progesterone, 17 alpha-hydroxyprogesterone, androstenedione (4-androstene-3,17-dione), and 17 beta-estradiol, were measured by simultaneous RIAs in 32 previously untreated elderly men (aged 61-85 yr) undergoing orchiectomy as therapy for prostatic carcinoma and 20 young men (aged 25-35 yr) with oligospermia and varicocele. In vitro steroidogenesis using labeled pregnenolone as substrate was also investigated. Serum and intratesticular testosterone levels were lower (P less than 0.05) in aged patients [3.3 +/- 1.9 ng/ml and 0.86 +/- 0.53 microgram/g tissue (mean +/- SD)] than in young men (6.4 +/- 1.9 ng/ml and 1.7 +/- 1.1 microgram/g tissue), while circulating LH levels were higher (P less than 0.05) in elderly men (151 +/- 105 ng/ml) than in the young men (79 +/- 33 ng/ml), indicating that a primary pathological process affects the senescent testis, producing a decline in testosterone production. Study of bioconversion of [3H]pregnenolone to delta 4 steroids, 17 alpha-hydroxysteroids, and C19 steroids as well as analysis of the relative amounts of intratesticular steroids, as determined by RIA, revealed no apparent differences in the process of microsomal steroidogenesis in elderly compared to that in young men. The sum of the nine measured intratesticular steroid concentrations per g tissue wt was significantly lower (P less than 0.05) in aged patients (1.94 +/- 0.93 microgram/g tissue), than in young patients (3.68 +/- 1.90 micrograms/g tissue). The sum of the nine intratesticular steroids measured was positively correlated (P less than 0.01) with circulating LH levels in both patient groups, and the slope of this regression line was 14-fold greater for young men than for elderly men. Since the total concentration of the nine measured steroids reflects the pregnenolone supplied by the mitochondria within Leydig cells, it appears that the decline in Leydig cell function in aged men is attributable to a reduced supply of mitochondrial steroid precursors rather than to an impairment in microsomal steroidogenesis.
Collapse
|
14
|
Yoshida K, LaNasa JA, Takahashi J, Winters SJ, Oshima H, Troen P. Studies of the human testis. XVI. Evaluation of multiple indexes of testicular function in relation to advanced age, idiopathic oligospermia, or varicocele. Fertil Steril 1982; 38:712-20. [PMID: 7141012 DOI: 10.1016/s0015-0282(16)46699-9] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/23/2023]
Abstract
Testicular function was evaluated by morphologic and biochemical methods in 11 infertile men with idiopathic oligospermia, 12 men with varicocele, and 14 elderly men. The results indicate the presence of two separate subgroups with idiopathic oligospermia with distinct endocrine and morphologic parameters and suggest the involvement of different pathogenetic factors for testicular disorders among these four groups. Biochemical indexes provide further confirmation of the validity of the Leydig cell cluster index (number of Leydig cell clusters per tubular section) as a useful evaluation guide. The results support the importance of combined studies of circulating hormones and testicular histologic features in providing insight into spermatogenic disorders. Recognition of etiologic diversity is an essential basis for further efforts to delineate and apply current or new hormonal techniques for therapy.
Collapse
|
15
|
Takahashi J, Higashi Y, LaNasa JA, Winters SJ, Oshima H, Troen P. Studies of the human testis. XVII. Gonadotropin regulation of intratesticular testosterone and estradiol in infertile men. J Clin Endocrinol Metab 1982; 55:1073-80. [PMID: 6813345 DOI: 10.1210/jcem-55-6-1073] [Citation(s) in RCA: 14] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
Abstract
Serum levels of LH and FSH and the intratesticular concentrations of testosterone (T) and estradiol (E) were measured in biopsy tissue from 40 infertile men, aged 21-36 yr, of whom 21 were oligospermic men with varicocele and 19 were men with idiopathic oligospermia. Intratesticular T and E concentrations were negatively correlated (P less than 0.001) with testicular volumes, as measured with a calibrated orchidometer, suggesting that differences in measured intratesticular steroid levels in part reflect altered relative Leydig cell density as seminiferous tubular volume changes. To gather information about the regulation of intratesticular T and E by gonadotropins, we calculated an index of intratesticular steroid content by multiplying steroid concentration by testicular volume and compared these values with circulating LH and FSH levels. Highly significant positive correlations were found between both serum LH and FSH and intratesticular E content and between LH and FSH and intratesticular T content. Multivariant stepwise regression analysis revealed that while serum FSH is a strong predictor of intratesticular E (r = 0.72; P less than 0.001), serum LH is not (partial r = 0.00 when controlling for the influence of FSH). Instead, the apparent relationship between Serum LH and intratesticular E results from the highly positive correlation between serum LH and FSH in the patients studied (r = 0.71; P less than 0.001). Similarly, circulating LH levels are independently related to intratesticular T content (r = 0.67; P less than 0.001), whereas the relationship between FSH and T is indirect (partial r = 0.06 when controlling for the influence of LH). We believe that these associations suggest that the major regulator of intratesticular T content is LH and that FSH may be the important gonadotropin regulating intratesticular E.
Collapse
|
16
|
LaNasa JA. Office evaluation of the infertile couple. Urol Clin North Am 1980; 7:121-36. [PMID: 7376299] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
|
17
|
Abstract
We have described a case of malacoplakia presenting with uremia in a young, previously healthy black man. Malacoplakia was found in the bladder over both ureteral orifices, causing obstruction. The patient was treated with antibiotics, a percutaneous nephrostomy tube, and finally with transurethral resection of the malacoplakia over the ureteral orifices. The patient's renal function improved dramatically and he is presently asymptomatic.
Collapse
|
18
|
Abstract
We reviewed 59 cases of urethral stricture diseases treated at Charity Hospital of Louisiana in New Orleans from 1965 to 1975 to determine whether surgery was a feasible alternative to repeated urethral dilatations. Five different surgical procedures were done: internal urethrotomy, Johanson-Leadbetter, patch-graft, Turner-Warwich, and dismembered technics. Results of internal urethrotomy were poor, but the other procedures had an overall success of 72 percent.
Collapse
|
19
|
Abstract
Cysts of the penis are rare and references to them in standard textbooks are sketchy. A case report of a congenital epidermal cyst of the median raphe of the penis is presented; therapy involved excision of the mass. Review of the literature is given.
Collapse
|