Effects of chain-chain interaction on the configuration of short-chain alkanethiol self-assembled monolayers on a metal surface

Surface-specific sum frequency generation vibrational spectroscopy is applied to study the molecular configuration of short-chain n-alkanethiol self-assembled monolayers (SAMs with n = 2-6) on the Au surface. For monolayers with n≥ 3, the alkanethiols are upright-oriented, with the CH3 tilt angle varying between ∼33° and ∼46° in clear even-odd dependency. The ethanethiol monolayer (n = 2) is, however, found to exhibit a distinct lying-down configuration with a larger methyl tilt angle (67°-79°) and a smaller CH2 tilt angle (56°-68°). Such a unique configurational transition from n = 2 to n≥ 3 discloses the steric effect owing to chain-chain interaction among neighboring molecules. Through density functional theory calculations, the transition is further confirmed to be energetically favorable for thiols on a defective reconstructed Au(111) surface but not on the pristine one. Our study highlights the roles of the chain-chain interaction and the substrate surface atomic structure when organizing SAMs, offering a strategic pathway for exploiting their applications.

Protein Adsorption on Mixed Self-Assembled Monolayers: Influence of Chain Length and Terminal Group

Mixed self-assembled monolayers (SAMs) are often used as highly tunable substrates for biomedical and biosensing applications. It is well documented, however, that mixed SAMs can be highly disordered at the molecular level and do not pack as closely or homogeneously as single-component SAMs, particularly when the chain lengths and head groups of the SAM thiol components are significantly different. In this study, we explore the impact of SAM structure and mixing ratio (-OH and -CH3 termini) on the weak physisorption behavior of bovine serum albumin (BSA), which adsorbs more readily to hydrophobic, methyl-terminated SAMs. Our results suggest that once the mixture includes 50% or more of the methyl terminus, the mixing ratio alone is a relatively good predictor of adsorption, regardless of the relative chain lengths of the thiols used in the mixture. This trend persists at any mixing ratio for SAMs where methyl- and hydroxyl-terminated groups are the same length or where the hydroxyl-terminated thiol is longer. The only variance observed is at low mixing ratios (<50% methyl-terminated) for a mixed SAM where the methyl-terminated component has a longer chain length. Relative protein adsorption increases on these mixtures, perhaps due to the disordered exposure of the excess alkane backbone. Taken together, however, we do not find significant evidence that varying chain lengths for mixed SAMs prepared on polycrystalline substrates and analyzed in air have an outsized influence on nanoscopic adsorption behavior, despite molecular-level disorder in the SAM itself.

Molecular Mechanism of Selective Al2O3 Atomic Layer Deposition on Self-Assembled Monolayers

Area-selective atomic layer deposition (AS-ALD) of insulating metallic oxide layers could be a useful nanopatterning technique for making increasingly complex semiconductor circuits. Although the alkanethiol self-assembled monolayer (SAM) has been considered promising as an ALD inhibitor, the low inhibition efficiency of the SAM during ALD processes makes its wide application difficult. We investigated the deposition mechanism of Al2O3 on alkanethiol-SAMs using temperature-dependent vibrational sum-frequency-generation spectroscopy. We found that the thermally induced formation of gauche defects in the SAMs is the main causative factor deteriorating the inhibition efficiency. Here, we demonstrate that a discontinuously temperature-controlled ALD technique involving self-healing and dissipation of thermally induced stress on the structure of SAM substantially enhances the SAM's inhibition efficiency and enables us to achieve 60 ALD cycles (6.6 nm). We anticipate that the present experimental results on the ALD mechanism on the SAM surface and the proposed ALD method will provide clues to improve the efficiency of AS-ALD, a promising nanoscale patterning and manufacturing technique.

Thermoresponse of Odd-Even Effect in n-Alkanethiolate Self-Assembled Monolayers on Gold Substrates

This study examines thermoresponse of odd-even effect in self-assembled monolayers (SAMs) of n-alkanethiolates (SC_n , n=3-18) formed on template-stripped gold (Au^TS ) using macro- and microscopic analytical techniques, contact angle goniometry (CAG) and vibrational sum frequency generation (VSFG) spectroscopy, respectively. Both CAG and VSFG analyses showed that the odd-even effect in liquid-like SAMs (n=3-9) disappeared upon heating at 50-70 °C, indicating that the heating led to increased structural disorder regardless of odd and even carbon numbers. In contrast, the opposite thermoresponse was observed for odd and even SC_n molecules in wax- and solid-like SAMs (n=10-18). Namely, temperature-dependent orientational change of terminal CH₃ relative to the surface normal was opposite for the odd and even molecules, thereby leading to mitigated odd-even effect. Our work offers important insights into thermoresponse of supramolecular structure in condensed organic matter.

Role of Nanoscale Roughness and Polarity in Odd-Even Effect of Self-Assembled Monolayers

The dependency of substrate roughness on wetting properties of self-assembled monolayers (SAMs) has been studied extensively, but most previous studies used limited selection of probing liquid and range of surface roughness. These studies disregarded the limit to observation of sub-nanometer odd-even parity effect, hence are inconclusive. In this work we report the role of solvent polarity on the roughness-dependency of wetting behavior of SAMs by studying static con-tact angle of a variety of probing liquids, with different polarities, on SAMs formed on Ag-based substrate with different surface morphology. By overlapping the roughness ranges with previous studies on Au, the limitation of surface roughness (RMS=1 nm) to observation of the odd-even effect using water as probing liquid was confirmed, but other probing liquid yielded different roughness-dependent behaviors, with more polar solvent showing more roughness-dependent behavior. Based on these observations, we concluded that there exists a phase-transition like behavior in SAMs due to substrate roughness and molecule chain length, but whose determination is dependent on the probing liquid.

Molecular Origin of the Odd-Even Effect of Macroscopic Properties of n-Alkanethiolate Self-Assembled Monolayers: Bulk or Interface?

Elucidating the influence of the monolayer interface versus bulk on the macroscopic properties (e.g., surface hydrophobicity, charge transport, and electron transfer) of organic self-assembled monolayers (SAMs) chemically anchored to metal surfaces is a challenge. This article reports the characterization of prototypical SAMs of n-alkanethiolates on gold (CH₃(CH₂)_nSAu, n = 6-19) at the macroscopic scale by electrochemical impedance spectroscopy and contact angle goniometry, and at the molecular level, by infrared reflection absorption spectroscopy. The SAM capacitance, dielectric constant, and surface hydrophobicity exhibit dependencies on both the length (n) and parity (n_odd or n_even) of the polymethylene chain. The peak positions of the CH₂ stretching modes indicate a progressive increase in the chain conformational order with increasing n between n = 6 and 16. SAMs of n_odd have a greater degree of structural gauche defects than SAMs of n_even. The peak intensities and positions of the CH₃ stretching modes are chain length independent but show an odd-even alternation of the spatial orientation of the terminal CH₃. The correlations between the different data trends establish that the chain length dependencies of the dielectric constant and surface hydrophobicity originate from changes in the polymethylene chain conformation (bulk), while the odd-even variation arises primarily from a difference in the chemical composition of the interface related to the terminal group orientation. These findings provide new physical insights into the structure-property relation of SAMs for the design of ultrathin film dielectrics as well as the understanding of stereostructural effects on the electrical characteristics of tunnel junctions.

Understanding Keesom Interactions in Monolayer-Based Large-Area Tunneling Junctions

Charge transport across self-assembled monolayers (SAMs) has been widely studied. Discrepancies of charge tunneling data that arise from various studies, however, call for efforts to develop new statistical analytical approaches to understand charge tunneling across SAMs. Structure-property studies on charge tunneling across SAM-based junctions have largely been through comparison of average tunneling rates and associated variance. These early moments (especially the average) are dominated by barrier width-a static property of the junction. In this work, we show that analysis of higher statistical moments (skewness and kurtosis) reveals the dynamic nature of the tunnel junction. Intramolecular Keesom (dipole-dipole) interactions dynamically fluctuate with bias as dictated by stereoelectronic limitations. Analyzing variance in the distribution of tunneling data instead of the first statistical moment (average), for a series of n-alkanethiols containing internal amide and aromatic terminal groups, we observe that the direction of dipole moments affects molecule-electrode coupling. An applied bias induces changes in the tunneling probability, affecting the distribution of tunneling paths in large-area molecular junctions.

Understanding interface (odd–even) effects in charge tunneling using a polished EGaIn electrode

Charge transport across large area molecular tunneling junctions is widely studied due to its potential in the development of quantum electronic devices.

Properties of Self-Assembled Monolayers Revealed via Inverse Tensiometry

Self-assembled monolayers (SAMs) have emerged as a simple platform technology and hence have been broadly studied. With advances in state-of-the-art fabrication and characterization methods, new insights into SAM structure and related properties have been delineated, albeit with some discrepancies and/or incoherencies. Some discrepancies, especially between experimental and theoretical work, are in part due to the misunderstanding of subtle structural features such as phase evolution and SAM quality. Recent work has, however, shown that simple techniques, such as the measurement of static contact angles, can be used to delineate otherwise complex properties of the SAM, especially when complemented by other more advanced techniques. In this article, we highlight the effect of nanoscale substrate asperities and molecular chain length on the SAM structure and associated properties. First, surfaces with tunable roughness are prepared on both Au and Ag, and their corresponding n-alkanethiolate SAMs are characterized through wetting and spectroscopy. From these data, chain-length- and substrate-morphology-dependent limits to the odd-even effect (structure and properties vary with the number of carbons in the molecules and the nature of the substrate), parametrization of gauche defect densities, and structural phase evolution (liquidlike, waxy, crystalline interfaces) are deduced. An evaluation of the correlation between the effect of roughness and the components of surface tension (polar-γ^p and dispersive-γ^d) reveals that wetting, at nanoscale rough surfaces, evolves proportionally with the ratio of the two components of surface tension. The evolution of conformational order is captured over a range of molecular lengths and parametrized through a dimensionless number, χ_c. By deploying a well-known tensiometry technique (herein the liquid is used to characterize the solid, hence the term inverse tensiometry) to characterize SAMs, we demonstrate that complex molecular-level phenomena in SAMs can be understood through simplicity.

Quantifying Gauche Defects and Phase Evolution in Self-Assembled Monolayers through Sessile Drops

Self-assembled monolayers (SAMs) are widely used in surface modifications, specifically in tuning the surface chemistry of materials. The structure and properties of SAMs have been extensively studied often with sophisticated tools, even for the simplest n-alkanethiolate SAMs. In SAMs, especially in linear n-alkanethiolates, the properties are dependent on the chain length, which is best manifested in the so-called odd-even effect, a simple yet not fully understood phenomenon. One main challenge is fully delineating the origin of length-dependent properties, which can be due to the structure (ideal SAMs), defect evolution, or substrate-molecule effects. This study demonstrates that utilizing the wetting behavior of polar (water) and nonpolar (hexadecane (HD)) solvents on n-alkanethiolate SAMs formed on ultraflat gold and silver surfaces, the evolution of chain-length-dependent gauche defects can be revealed and parameterized through a newly defined dimensionless number (χ). The observation of the odd-even effect in hydrophobicity, however, depends on the thiol chain length, and it was only observed on longer-chain (>C₈) molecules. The trend in this odd-even effect demonstrates that there are three main transitions in the nature of wetting, hence structure, across n-alkanethiols. From wetting with HD, the role of dispersive components in wetting reveal that the SAMs are dynamic, which we attribute to rotations associated with previously reported evolution in gauche defects and changes in packing density. Therefore, from re-expression of the Young-Dupre equation, we define a new dimensionless number associated with molecular conformations, whose periodicity mirrors the energetics of Goodman's conformations of n-alkanes in unbound states and associated four- or two-twist turns. Therefore, we infer that the evolution in surface energy is largely due to molecular conformations and associated relaxations of the bound thiolates.

Effect of Substrate Morphology on the Odd-Even Effect in Hydrophobicity of Self-Assembled Monolayers

Surface roughness, often captured through root-mean-square roughness (R_rms), has been shown to impact the quality of self-assembled monolayers (SAMs) formed on coinage metals. Understanding the effect of roughness on hydrophobicity of SAMs, however, is complicated by the odd-even effect-a zigzag oscillation in contact angles with changes in molecular length. We recently showed that for surfaces with R_rms > 1 nm, the odd-even effect in hydrophobicity cannot be empirically observed. In this report, we compare wetting properties of SAMs on Ag and Au surfaces of different morphologies across the R_rms ∼ 1 nm limit. We prepared surfaces with comparable properties (grain sizes and R_rms) and assessed the wetting properties of resultant SAMs. Substrates with R_rms either below or above the odd-even limit were investigated. With smoother surfaces (lower R_rms), an inverted asymmetric odd-even zigzag oscillation in static contact angles (θ_s) was observed with change from Au to Ag. Asymmetry in odd-even oscillation in Au was attributed to a larger change in θ_s from odd to even number of carbons in the n-alkanethiol and vice versa for Ag. For rougher surfaces, no odd-even effect was observed; however, a gradual increase in the static contact angle was observed. Increase in the average grain sizes (>3 times larger) on rough surfaces did not lead to significant difference in the wetting properties, suggesting that surface roughness significantly dominated the nature of the SAMs. We therefore infer that the predicted roughness-dependent limit to the observation of the odd-even effect in wetting properties of n-alkanethiols cannot be overcome by creating surfaces with large grain sizes for surfaces with R_rms > 1 nm. We also observed that the differences between Au and Ag surfaces are dominated by differences in the even-numbered SAMs, but this difference vanishes with shorter molecular chain length (≤C₃).

Empirical Evidence for Roughness-Dependent Limit in Observation of Odd-Even Effect in Wetting Properties of Polar Liquids on n-Alkanethiolate Self-Assembled Monolayers

Substrate roughness influences the wetting properties of self-assembled monolayers (SAMs), but details on this dependency at the sub-nanometer level are still lacking. This study investigates the effect of surface roughness on interfacial properties of n-alkanethiolate SAMs, specifically wetting, and confirms the predicted limit to the observation of the odd-even effect in hydrophobicity. This article studies static contact angles of polar and nonpolar probe liquids on a series of n-alkanethiolate SAMs on surfaces with tunable roughness. We prepared Ag surfaces with root-mean-square roughness (Rrms) of ∼0.6-2.2 nm and compared the wetting properties of n-alkanethiolate SAMs fabricated on these surfaces. We measured the static contact angles, θs, formed between SAM and probe liquids [water, glycerol, and hexadecane]. Hexadecane showed an odd-even effect on all surfaces irrespective of the degree of roughness. Polar liquids (water and glycerol), however, showed a dependency on the roughness of the substrate with an odd-even effect observable only on smooth, but not rougher (Rrms ≥ 1.15 nm), surfaces. These results confirm that the previously predicted limit to observation of the odd-even effect in hydrophobicity (here extended to polar liquids) is real. From the results with glycerol, we infer that this limit is not limited just to hydrophobicity but may extend to other polar liquids. Results from hexadecane, however, suggest that this limit may not be a universal property of the SAM.