The synergistic effect of Cd-doped and S-vacancies in CdxZn1-xIn2S4 2D nanosheets for high-performance triethylamine sensing

Ternary metal sulfides with suitable band gaps, high physicochemical stability, and unique two-dimensional (2D) nanostructures are expected to be the next-generation high-performance gas sensors following the MOS type. Doping engineering is utilized as an effective strategy to improve the semiconductor surface activity and enhance its gas-sensitive properties. In this paper, the energy band structure and surface chemical oxygen of ZnIn2S4 (ZIS) materials was tuned by selectively introducing substitutional Cd to replace the Zn sites in ZIS crystals. Meanwhile, the introduction of Cd-ions brings more abundant S vacancy defects, enhances the acid-base interactions at the interface, and pushes the extent of surface redox reactions. In addition, by combining the strong adsorption of ZIS to triethylamine, the CdxZn1-xIn2S4 nanosheets achieved highly improved sensing properties, including better response (63.38-100 ppm), enhanced selectivity (STEA/sother = 12.9), and accelerated response/recovery (4 s/32 s). The results confirm the feasibility of developing low-cost, high-performance 2D metal sulfide gas sensing materials through rational structural design and optimization.

Directional Transport in Hierarchically Aligned ZSM-5 Zeolites with High Catalytic Activity

Zeolites, the most technically important crystalline microporous materials, are indispensable cornerstones of chemical engineering because of their remarkable catalytic properties and adsorption capabilities. Numerous studies have demonstrated that the hierarchical engineering of zeolites can maximize accessible active sites and improve mass transport, which significantly decreases the internal diffusion limits to achieve the desired performance. However, the construction of hierarchical zeolites with ordered alignments and size-controlled substructures in a convenient way is highly challenging. Herein, we develop a facile procedure using two common structure-directing agents, tetrapropylammonium hydroxide (TPAOH) and tetraethylammonium hydroxide (TEAOH), to synthesize hierarchically aligned ZSM-5 (Hie-ZSM-5) crystals with a-axis alignment substructures of controllable size. The control of the substructure size (α) in the range of 10-60 nm and the corresponding similarity (r = α/β, where β is the size of Hie-ZSM-5) ranging from 0.004 to 0.033 can be tuned by varying the Si/Al ratios (40-120). A systematic investigation of the overall crystallization process, using time-dependent XRD, SEM, TEM, and solid-state magic-angle spinning NMR (13C, 27Al, 29Si) methods, enable us to construct a solid mechanism for the generation of Hie-ZSM-5. Most importantly, directional transport in the unique structures of Hie-ZSM-5 efficiently enhances mass diffusion, as well as catalytic activity and stability. These findings improve our understanding of the zeolite crystallization process and inspire novel methods for the rational design of hierarchical zeolites.

Multifunctional Strategies of Advanced Electrocatalysts for Efficient Urea Synthesis

The electrochemical reduction of nitrogenous species (such as N2, NO, NO2 -, and NO3 -) for urea synthesis under ambient conditions has been extensively studied due to their potential to realize carbon/nitrogen neutrality and mitigate environmental pollution, as well as provide a means to store renewable electricity generated from intermittent sources such as wind and solar power. However, the sluggish reaction kinetics and the scarcity of active sites on electrocatalysts have significantly hindered the advancement of their practical applications. Multifunctional engineering of electrocatalysts has been rationally designed and investigated to adjust their electronic structures, increase the density of active sites, and optimize the binding energies to enhance electrocatalytic performance. Here, surface engineering, defect engineering, doping engineering, and heterostructure engineering strategies for efficient nitrogen electro-reduction are comprehensively summarized. The role of each element in engineered electrocatalysts is elucidated at the atomic level, revealing the intrinsic active site, and understanding the relationship between atomic structure and catalytic performance. This review highlights the state-of-the-art progress of electrocatalytic reactions of waste nitrogenous species into urea. Moreover, this review outlines the challenges and opportunities for urea synthesis and aims to facilitate further research into the development of advanced electrocatalysts for a sustainable future.

Assembly and jamming of polar additive-swollen microgels at liquid-liquid interfaces: From inverse Pickering emulsions to functional materials

HYPOTHESIS

Poly-N-isopropylacrylamide (PNIPAM)-based microgels have garnered significant interest as effective soft particulate stabilizers because of their deformability and functionality. However, the inherent hydrophilic nature of microgel restricts their potential use in stabilizing water-in-oil (W/O) Pickering emulsions. Employing diverse polar additives can improve the hydrophobicity of microgels, thus unlocking new possibilities in inverse Pickering emulsion formation and materials fabrication.

EXPERIMENTS

Different types of microgels were generated using free-radical precipitation polymerization with tailored physiochemical properties. The effect of various polar additives on the wettability, adsorption kinetics, and interfacial coverage of microgels was systematically investigated. Additive-swollen microgels were utilized to stabilize inverse W/O Pickering emulsions, which served as templates to develop functional materials with stimuli responsiveness and hierarchical structures.

FINDINGS

Additive-swollen PNIPAM-based microgels exhibited enhanced hydrophobicity and superior emulsifying capability, which spontaneously assembled and jammed at oil-water interfaces, resulting in a significant interfacial energy decrease. The additive-swollen microgels formed a tightly packed, elastic, and responsive microgel monolayer. The feasibility of the strategy was verified by preparing various inverse W/O Pickering emulsions and high internal phase Pickering emulsions (HIPPEs). More importantly, this straightforward formation strategy of microgel-stabilized inverse W/O Pickering emulsions offered a novel platform to create functional materials with customized inner structures from microscale (e.g., responsive core-shell hydrogel microspheres and colloidosomes) to macroscale (e.g., hierarchical porous materials) that can be used for potential applications, such as recyclable contaminant removal and droplet manipulation.

Fabrication of a ZIF-8/PVA Membrane on PVDF Fiber by Spray for the Highly Efficient Separation of Oil-in-Water Emulsions

In human life and production, excessive oily wastewaters containing detergents are produced and discharged, causing severe environmental pollution and water resource problems. A metal-organic framework (MOF)-based membrane is an economical and environmentally friendly tool for emulsion separation but is limited by a complex preparation process and poor flexibility. Herein, we developed a simple method to synthesize a MOF-based mixed-matrix membrane (MMM) by spray and fabricated the membrane on poly(vinylidene fluoride) (PVDF) fibers via postdeposition and in situ growth manners. The prepared ZIF-8/PVA MMMs have uniform distribution of ZIF-8 particles and poly(vinyl alcohol) (PVA) on the PVDF fibers. PVA improved the adhesion between the ZIF-8 particles and between the MOF layer and PVDF fiber, endowing the separation membrane with high flexibility and bendability. The prepared ZIF-8/PVA membrane exhibited hydrophilicity and underwater superoleophobicity, which showed high separation efficiency and considerable water flux for emulsions, emulsion containing dye, and surfactant-stabilized emulsion. In addition, the fabricated ZIF-8/PVA/PVDF fibers exhibited good antifouling property and flexibility and can maintain stable separation efficiency after working several times and even under bending, demonstrating the stability and potentiality of the ZIF-8/PVA/PVDF fibers in practical applications. This work paves a new avenue for the synthesis and application of MOF-based MMMs.

Construction of Yolk@shell Nanocomposite Particles with Controlled Multisized Pore Structures by Monomicelle Confined Assembly

Hollow nanoparticles with tunable structures and spatial and chemical specificity are considered as promising carriers. However, it remains a formidable challenge to endow hollow nanomaterials with precisely controlled multisized macro/mesoporous structures up to now. This paper demonstrates a "polydopamine (PDA) expansion-shrinkage" strategy combined with a monomicelle interfacial confined assembly method to achieve the highly controllable preparation of a series of yolk@shell PDA@SiO2 composite nanoparticles with structural asymmetry and a tunable multisized pore in the shell. The strategy allows systematic manipulation of the average pore size of large slit pores in the range of 15.4-86.5 nm by adjusting the reaction temperature. Benefiting from advantages such as an asymmetric structure and multilevel porosity, they exhibit excellent performance in the applications of on-demand loading of dual-sized cargoes, dual-propelled nanomotors, and particle size-selected encapsulation and separation. These findings provide inspiration for the construction of asymmetric yolk@shell structures with tunable multisized pores for a wide range of biological and chemical applications.

Fluorescent Porous Materials Based on Aggregation-induced Emission for Biomedical Applications

Fluorescent porous materials based on aggregation-induced emission (AIE) are growing into a sparkling frontier in biomedical applications. Exploring those materials represents a win-win integration and has recently progressed at a rapid pace, mainly benefiting from intrinsic advantages including tunable pore size and structure, strong guest molecule encapsulation ability, superior biocompatibility, and photophysical outcomes. With the great significance and rapid progress in this area, this review provides an integrated picture on AIE luminogen-based porous materials. It encompasses inorganic, organic, and inorganic-organic porous materials, exploring fundamental concepts and the relationship between AIE performance and material design and highlighting significant breakthroughs and the latest trends in biomedical applications. In addition, some critical challenges and future perspectives in the development of AIE luminogen-based porous materials are also discussed.

Biomimetic Hierarchies for Universal Surface Enhancement and Applications in Water Treatment

Hierarchical superstructures, ubiquitously found in nature, offer enhanced efficiency in both substance reaction and mass transport owing to their unique multiscale features. Inspired by these natural systems, this research reports a general and scalable electrochemical scheme for creating highly branched, multilevel porous superstructures on various electrically conductive substrates. These structures exhibit cascading features from centimeters, submillimeters, micrometers, down to sub-100 nm, significantly increasing the surface area of substrates, such as foams, foils, and carbon cloth by 2 orders of magnitude─among the highest reported enhancements. This versatile and low-cost method, applicable to a range of electrically conductive substrates, enables innovative flow-assisted water purification with enhanced energy efficiency. The performance, successfully removing 99% of mercury within 0.5 h at 540 rpm and meeting the U.S. Environmental Protection Agency (EPA) safety standards for drinking water, further validates the advantages of these unique structures. Overall, the reported general, economical, and versatile scheme could broadly impact energy and environmental remediation.

Accurate prediction of discontinuous crack paths in random porous media via a generative deep learning model

Pore structures provide extra freedoms for the design of porous media, leading to desirable properties, such as high catalytic rate, energy storage efficiency, and specific strength. This unfortunately makes the porous media susceptible to failure. Deep understanding of the failure mechanism in microstructures is a key to customizing high-performance crack-resistant porous media. However, solving the fracture problem of the porous materials is computationally intractable due to the highly complicated configurations of microstructures. To bridge the structural configurations and fracture responses of random porous media, a unique generative deep learning model is developed. A two-step strategy is proposed to deconstruct the fracture process, which sequentially corresponds to elastic deformation and crack propagation. The geometry of microstructure is translated into a scalar of elastic field as an intermediate variable, and then, the crack path is predicted. The neural network precisely characterizes the strong interactions among pore structures, the multiscale behaviors of fracture, and the discontinuous essence of crack propagation. Crack paths in random porous media are accurately predicted by simply inputting the images of targets, without inputting any additional input physical information. The prediction model enjoys an outstanding performance with a prediction accuracy of 90.25% and possesses a robust generalization capability. The accuracy of the present model is a record so far, and the prediction is accomplished within a second. This study opens an avenue to high-throughput evaluation of the fracture behaviors of heterogeneous materials with complex geometries.

Bridging length scales in hard materials with ultra-small angle X-ray scattering - a critical review

Owing to their exceptional properties, hard materials such as advanced ceramics, metals and composites have enormous economic and societal value, with applications across numerous industries. Understanding their microstructural characteristics is crucial for enhancing their performance, materials development and unleashing their potential for future innovative applications. However, their microstructures are unambiguously hierarchical and typically span several length scales, from sub-ångstrom to micrometres, posing demanding challenges for their characterization, especially for in situ characterization which is critical to understanding the kinetic processes controlling microstructure formation. This review provides a comprehensive description of the rapidly developing technique of ultra-small angle X-ray scattering (USAXS), a nondestructive method for probing the nano-to-micrometre scale features of hard materials. USAXS and its complementary techniques, when developed for and applied to hard materials, offer valuable insights into their porosity, grain size, phase composition and inhomogeneities. We discuss the fundamental principles, instrumentation, advantages, challenges and global status of USAXS for hard materials. Using selected examples, we demonstrate the potential of this technique for unveiling the microstructural characteristics of hard materials and its relevance to advanced materials development and manufacturing process optimization. We also provide our perspective on the opportunities and challenges for the continued development of USAXS, including multimodal characterization, coherent scattering, time-resolved studies, machine learning and autonomous experiments. Our goal is to stimulate further implementation and exploration of USAXS techniques and inspire their broader adoption across various domains of hard materials science, thereby driving the field toward discoveries and further developments.

Advances in porous carbon materials for a sustainable future: A review

Developing clean and renewable energy sources is key to a sustainable future. For human society to progress sustainably, environmentally friendly energy conversion and storage technologies are critical. The use of nanostructured advanced functional materials heavily influences the functionality of these systems. Porous carbons are multifunctional materials boasting considerable industrial utility. They possess many remarkable physiochemical and mechanical characteristics which have garnered interest in various fields. In this review, the application of porous carbon materials in electrocatalysis (HER, OER, ORR, NARR, and CO2RR) and rechargeable batteries (LIBs, LiS batteries, NIBs, and KIBs) for renewable energy conversion and storage are discussed. The suitability of porous carbon materials for these applications is discussed, and some recent works are reviewed. Finally, a few viewpoints on developing porous carbons in electrocatalysis and rechargeable batteries are given. This review aims to generate interest in current and upcoming researchers in porous carbon application for a sustainable future.

Enhancing the supercapacitive performance of a carbon-based electrode through a balanced strategy for porous structure, graphitization degree and N,B co-doping

Regarding carbon-based electrodes, simultaneously establishing a well-defined meso-porous architecture, introducing abundant hetero-atoms and improving the graphitization degree can effectively enhance their capacitive performance. However, it remains a significant challenge to achieve a good balance between defects and graphitization degree. In this study, the porous structure and composition of carbon materials are co-optimised through a 'dual-function' strategy. Briefly, K3Fe(C2O4)3 and H3BO3 were hybridised with a gelatin aqueous solution to form a homogeneous composite hydrogel, followed by lyophilisation and carbonisation. Owing to the dual functionality of raw materials, the graphitization, activation and hetero-atom doping processes can occur simultaneously during a one-step high-temperature treatment. The resultant carbon material exhibits a high graphitization degree (ID/IG = 0.9 ± 0.1), high hetero-atom content (N: 9.0 ± 0.3 at.%, B: 6.9 ± 0.5 at.%) and a large specific area (1754 ± 58 m2/g). The as-prepared electrode demonstrates a superior capacitance of 383 ± 1F g-1 at 1 A/g. Interestingly, the cyclic voltammetry (CV) curves exhibit a distinctive pair of broad redox peaks, which is uncommon in KOH electrolyte. Experiment data and density functional theory (DFT) simulation verify that N-5, B co-doping enhances the activity of the faradic reaction of carbon electrodes in KOH electrolyte. Furthermore, the fabricated Zn-ion hybrid supercapacitor (ZHSC) based on this carbon electrode delivers a high-energy density of 140.7 W h kg-1 at a power density of 840 W kg-1.

Colloidal Templating in Catalyst Design for Thermocatalysis

Conventional catalyst preparative methods commonly entail the impregnation, precipitation, and/or immobilization of nanoparticles on their supports. While convenient, such methods do not readily afford the ability to control collective ensemble-like nanoparticle properties, such as nanoparticle proximity, placement, and compartmentalization. In this Perspective, we illustrate how incorporating colloidal templating into catalyst design for thermocatalysis confers synthetic advantages to facilitate new catalytic investigations and augment catalytic performance, focusing on three colloid-templated catalyst structures: 3D macroporous structures, hierarchical macro-mesoporous structures, and discrete hollow nanoreactors. We outline how colloidal templating decouples the nanoparticle and support formation steps to devise modular catalyst platforms that can be flexibly tuned at different length scales. Of particular interest is the raspberry colloid templating (RCT) method which confers high thermomechanical stability by partially embedding nanoparticles within its support, while retaining high levels of reactant accessibility. We illustrate how the high modularity of the RCT approach allows one to independently control collective nanoparticle properties, such as nanoparticle proximity and localization, without concomitant changes to other catalytic descriptors that would otherwise confound analyses of their catalytic performance. We next discuss how colloidal templating can be employed to achieve spatially disparate active site functionalization while directing reactant transport within the catalyst structure to enhance selectivity in multistep catalytic cascades. Throughout this Perspective, we highlight developments in advanced characterization that interrogate transport phenomena and/or derive new insights into these catalyst structures. Finally, we offer our outlook on the future roles, applications, and challenges of colloidal templating in catalyst design for thermocatalysis.

Adsorption of Bichromate and Arsenate Anions by a Sorbent Based on Bentonite Clay Modified with Polyhydroxocations of Iron and Aluminum by the "Co-Precipitation" Method

The physicochemical properties of natural bentonite and its sorbents were studied. It has been established the modification of natural bentonites using polyhydroxoxides of iron (III) (mod.1_Fe_5-c) and aluminum (III) (mod.1_Al_5-c) by the "co-precipitation" method led to changes in their chemical composition, structure, and sorption properties. It was shown that modified sorbents based on natural bentonite are finely porous (nanostructured) objects with a predominance of pores of 1.5-8.0 nm in size. The modification of bentonite with iron (III) and aluminum compounds by the "co-precipitation" method also leads to an increase in the sorption capacity of the obtained sorbents with respect to bichromate and arsenate anions. A kinetic analysis showed that, at the initial stage, the sorption process was controlled by an external diffusion factor, that is, the diffusion of the sorbent from the solution to the liquid film on the surface of the sorbent. The sorption process then began to proceed in a mixed diffusion mode when it limited both the external diffusion factor and the intra-diffusion factor (diffusion of the sorbent to the active centers through the system of pores and capillaries). To clarify the contribution of the chemical stage to the rate of adsorption of bichromate and arsenate anions by the sorbents under study, kinetic curves were processed using equations of chemical kinetics (pseudo-first-order, pseudo-second-order, and Elovich models). It was found that the adsorption of the studied anions by the modified sorbents based on natural bentonite was best described by a pseudo-second-order kinetic model. The high value of the correlation coefficient for the Elovich model (R2 > 0.9) allows us to conclude that there are structural disorders in the porous system of the studied sorbents, and their surfaces can be considered heterogeneous. Considering that heterogeneous processes occur on the surface of the sorbent, it is natural that all surface properties (structure, chemical composition of the surface layer, etc.) play an important role in anion adsorption.

A liter scale synthesis of hierarchically mesoporous UiO-66 for removal of large antibiotics from wastewater

The presence of antibiotics in water sources is a significant concern due to their potential environmental impact and the risks to human health. In the present research, hierarchically mesoporous UiO-66 (HP-UiO-66) with a high surface area (1011 m2/g) and large pore volume was synthesized using the reflux method on the liter scale. The successful synthesis was confirmed by FT-IR, XRD, FESEM/EDS, N2-adsorption/desorption, and zeta potential techniques. The HP-UiO-66 was utilized to remove two large structure antibiotics, chlortetracycline hydrochloride (CTC), and oxytetracycline (OTC). Box Behnken design was used to investigate the factors affecting the removal process and the interactions between them. The maximum adsorption capacities for OTC and CTC antibiotics were 252.9 mg/g and 234.2 mg/g at 35 °C, respectively. The sum of the normalized error method was applied to the analysis of various error functions in the nonlinear fitting of equilibrium and kinetic data. The CTC and OTC adsorption kinetic followed a fractal-like pseudo-second-order model. The Langmuir isotherm fitted well to adsorption data. The results demonstrate that HP-UiO-66 can be used as a recyclable and efficient adsorbent for large molecule antibiotics removal.

DNA-functionalized cryogel based colorimetric biosensor for sensitive on-site detection of aflatoxin B1 in food samples

Hydrogel biosensors present numerous advantages in food safety analysis owing to their remarkable biocompatibility, cargo-loading capabilities and optical properties. However, the current drawbacks (slow target responsiveness and poor mechanical strength) restricted their further utilization at on-site detection of targets. To address these challenges, a DNA-functionalized cryogel with hierarchical pore structures is constructed to improve the reaction rate and the robustness of hydrogel biosensor. During cryogel preparation, ice crystals serve as templates, shaping interconnected hierarchical microporous structures to enhance mass transfer for faster responses. Meanwhile, in the non-freezing zone, concentrated monomers create a dense cross-linked network, strengthening cryogel matrix strength. Accordingly, a colorimetric biosensor based on DNA cryogel has been developed as a proof of concept for rapid detection of aflatoxin B1 (AFB1) in food samples, and an excellent analytical performance was obtained under the optimized conditions with a low detection limit (1 nM), broad detection range (5-100 nM), satisfactory accuracy and precision (recoveries, 81.2-112.6 %; CV, 2.75-5.53 %). Furthermore, by integrating with a smartphone sensing platform, a portable device was created for rapid on-site measurement of target within 45 min, which provided some insight for hydrogel biosensors design.

Ionic Porous Aromatic Frameworks Embedding Polyoxometalates for Heterogeneous Catalysis

Porous aromatic frameworks (PAFs) are highly promising functional porous solids known for their feasible amenability and extraordinary stability. When the framework was modified by ionic functional groups, these ionic PAFs (iPAFs) exhibited charged channels for adsorption, separation, and catalysis. However, the surface areas of ionic porous frameworks are usually lower than that of neutral frameworks, and their synthesis is limited by specific strategies and complex modification processes. To address these challenges, an intuitive route to construct ionic porous framework with high specific surface area was proposed. Herein, a multivariate ionic porous aromatic framework (MTV-iPAFs, named PAF-270) was synthesized using readily available building units with ionic functional groups through a multivariable synthesis strategy. PAF-270 exhibited hierarchical structure with the highest specific surface area among reported imidazolium-functionalized PAFs. Utilizing its physical and chemical properties, the availability for polyoxometalate loading and heterogeneous catalysis of PAF-270 were explored. PAF-270 exhibited a high adsorption capacity up to 50 % for both H3O40PW12 (HPW) and (NH4)5H6PV8Mo4O40 (V8). HPW@PAF-270 and V8@PAF-270 exhibited excellent catalytic abilities for oleic acid esterification and extractive oxidative desulfurization, respectively. Due to the stability of PAFs, these materials also showed remarkable resistance to temperature and pH changes. Overall, these results underscore the potential application of MTV-iPAFs as versatile functional porous materials.

Hierarchically Ordered Pore Engineering of Metal-Organic Framework-Based Materials for Electrocatalysis

Ordered pore engineering that embeds uniform pores with periodic alignment in electrocatalysts opens up a new avenue for achieving further performance promotion. Hierarchically ordered porous metal-organic frameworks (HOP-MOFs) possessing multilevel pores with ordered distribution are the promising precursors for the exploration of ordered porous electrocatalysts, while the scalable acquisition of HOP-MOFs with editable components and adjustable pore size regimes is critical. This review presents recent progress on hierarchically ordered pore engineering of MOF-based materials for enhanced electrocatalysis. The synthetic strategies of HOP-MOFs with different pore size regimes, including the self-assembly guided by reticular chemistry, surfactant, nanoemulsion, and nanocasting, are first introduced. Then the applications of HOP-MOFs as the precursors for exploring hierarchically ordered porous electrocatalysts are summarized, selecting representatives to highlight the boosted performance. Especially, the intensification of molecule and ion transport integrated with optimized electron transfer and site exposure over the hierarchically ordered porous derivatives are emphasized to clarify the directional transfer and integration effect endowed by ordered pore engineering. Finally, the remaining scientific challenges and an outlook of this field are proposed. It is hoped that this review will guide the hierarchically ordered pore engineering of nanocatalysts for boosting the catalytic performance and promoting the practical applications.

Liquid-phase xylene isomerization on nano-sized ZSM-5

The isomerization process of xylene in the liquid phase has garnered significant attention due to its low energy consumption and high selectivity. However, conventional ZSM-5 zeolites have exhibited significantly diminished activity in this process, primarily attributed to diffusion barriers. To address this issue, Nano-ZSM-5 zeolite was synthesized using tetrapropylammonium hydroxide (TPAOH) as a structure direct agent (SDA) and introducing silicate-1 (S-1) as a crystallization seed. The impact of OH-/SiO2 molar ratio on the sample morphology was investigated. The structure of Nano-ZSM-5 zeolite was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N2 physical -sorption analysis. The results demonstrate that the addition of S-1 crystal seeds enables the formation of ZSM-5 crystallites with diminutive particle sizes (∼20 nm). Furthermore, variations in the OH-/SiO2 molar ratio within the synthetic system impact crystallite aggregation, excessively high or low ratios result in severe aggregation, leading to decreased specific surface area and mesoporous volume. By optimizing the OH-/SiO2 molar ratio to 0.2, the sample exhibits exceptional dispersibility with a specific surface area of 420 m2 g-1 and a mesoporous volume extending to 0.57 cm3 g-1. When utilized as a catalyst for liquid-phase xylene isomerization, nano-ZSM-5 demonstrates superior catalytic performance compared to traditional zeolite.

Gas-Phase-Induced Engineering for Fabrication of 3D Hierarchical Porous Nickel and Its Application toward High-Performance Supercapacitors

Commercial nickel foam (NF), which is composed of numerous interconnected ligaments and hundred-micron pores, is widely acknowledged as a current collector/electrode material for catalysis, sensing, and energy storage applications. However, the commonly used NF often does not work satisfactorily due to its smooth surface and hollow structure of the ligaments. Herein, a gas-phase-induced engineering, two-step gaseous oxidation-reduction (GOR) is presented to directly transform the thin-walled hollow ligament of NF into a three-dimensional (3D) nanoporous prism structure, resulting in the fabrication of a unique hierarchical porous nickel foam (HPNF). This 3D nanoporous architecture is achieved by utilizing the spontaneous reconstruction of nickel atoms during volume expansion and contraction in the GOR process. The process avoids the involution of acid-base corrosion and sacrificial components, which are facile, environmentally friendly, and suitable for large-scale fabrication. Furthermore, MnO2 is electrochemically deposited on the HPNF to form a supercapacitor electrode (HPNF/MnO2). Because of the fully open structure for ion transport, superhydrophilic properties, and the increased contact area between MnO2 and the current collector, the HPNF/MnO2 electrode exhibits a high specific capacitance of 997.5 F g-1 at 3 A g-1 and remarkable cycling stability with 99.6% capacitance retention after 20000 cycles in 0.1 M Na2SO4 electrolyte, outperforming most MnO2-based supercapacitor electrodes.

A review on transition metal oxides in catalysis

Transition Metal Oxides (TMOs) have drawn significant attention due to their diverse range of properties and applications. The partially filled d orbitals of the transition metal ions, with highly electronegative oxygen atoms, give rise to unique electronic structures that lead to multiple applications due to their magnetic, optical, and structural properties. These properties have a direct influence on chemical reactions that enable tailoring materials for specific applications in catalysis, such as electrocatalysis and photocatalysis. While the potential of TMOs is promising, their development for enhanced functional properties poses numerous challenges. Among these challenges, identifying the appropriate synthesis processes and employing optimal characterization techniques are crucial. In this comprehensive review, an overview of recent trends and challenges in the synthesis and characterization of highly functional TMOs as well as ceramics will be covered with emphasis on catalytic applications. Mesoporous materials play a key role in augmenting their functionality for various applications and will be covered. Ab-initio modeling aspects for the design and development of novel TMO will be also discussed.

Recycling cobalt from spent lithium-ion batteries for designing the novel cobalt nitride followers: Towards efficient overall water splitting and advanced zinc-air batteries

Although cobalt nitride (CoN)-based nanomaterials have been widely designed as advanced oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and oxygen reduction reaction (ORR) catalysts, the continuous consumption of lithium-ion batteries (LIBs) has led to a high price of cobalt metal. Therefore, in the future, recycling valuable Co elements from spent devices and boosting their service efficiency will inevitably promote the utilization of Co-based materials in water splitting and zinc-air batteries (ZABs). Herein, we realize the Co recycling from spent LIBs by a simple hydrometallurgy method. Under the assistance of hexamethylenetetramine and polystyrene spheres, after the hydrothermal and pyrolysis treatment in the NH3 atmosphere, the as-reclaimed cobalt oxalates were successfully transformed into novel three-dimensional (3D) CoN nanoflowers (denoted as CoN NFs). Benefiting from the unique 3D flower-like architectures, intrinsic high conductivity, large surface area, uniformly dispersed CoN nanoparticles, and the synergistic effect between Co3N and CoO phases, the 3D flower-like CoN NFs exhibited excellent OER catalytic activity. The performance was much better than commercial RuO2 in the 1.0 M KOH solution. Furthermore, the CoN NFs-based water splitting cell needed a voltage of 1.608 V to achieve the current density of 10 mA cm-2, which is even 16 mV smaller than that of Pt/C||RuO2 benchmark (1.624 V). Meanwhile, the CoN NFs-derived ZAB exhibited a high peak power density of 107.3 mW cm-2 (vs. 103.2 mW cm-2 of Pt/C-RuO2-based ZAB) and a low charge-discharge voltage gap (0.93 V vs. 1.43 V of Pt/C-RuO2-based ZAB). Due to the excellent structural and elemental stabilities, the corresponding water splitting cell and ZAB had outstanding durability. This work successfully explored an advanced industrial chain from recycling Co metal in spent devices to designing the high-efficiency HER/OER/ORR electrocatalysts for advanced water splitting devices and ZABs. This will further promote the value-added utilization of valuable Co metal in various energy storage or conversion devices.

Constructing ordered and tunable extrinsic porosity in covalent organic frameworks via water-mediated soft-template strategy

As one of the most attractive methods for the synthesis of ordered hierarchically porous crystalline materials, the soft-template method has not appeared in covalent organic frameworks (COFs) due to the incompatibility of surfactant self-assembly and guided crystallization process of COF precursors in the organic phase. Herein, we connect the soft templates to the COF backbone through ionic bonds, avoiding their crystallization incompatibilities, thus introducing an additional ordered arrangement of soft templates into the anionic microporous COFs. The ion exchange method is used to remove the templates while maintaining the high crystallinity of COFs, resulting in the construction of COFs with ordered hierarchically micropores/mesopores, herein named OHMMCOFs (OHMMCOF-1 and OHMMCOF-2). OHMMCOFs exhibit significantly enhanced functional group accessibility and faster mass transfer rate. The extrinsic porosity can be adjusted by changing the template length, concentration, and ratio. Cationic guanidine-based COFs (OHMMCOF-3) are also constructed using the same method, which verifies the scalability of the soft-template strategy. This work provides a path for constructing ordered and tunable extrinsic porosity in COFs with greatly improved mass transfer efficiency and functional group accessibility.

Flexible Aerogel Materials: A Review on Revolutionary Flexibility Strategies and the Multifunctional Applications

The design and preparation of flexible aerogel materials with high deformability and versatility have become an emerging research topic in the aerogel fields, as the brittle nature of traditional aerogels severely affects their safety and reliability in use. Herein, we review the preparation methods and properties of flexible aerogels and summarize the various controlling and design methods of aerogels to overcome the fragility caused by high porosity and nanoporous network structure. The mechanical flexibility of aerogels can be revolutionarily improved by monomer regulation, nanofiber assembly, structural design and controlling, and constructing of aerogel composites, which can greatly broaden the multifunctionality and practical application prospects. The design and construction criterion of aerogel flexibility is summarized: constructing a flexible and deformable microstructure in an aerogel matrix. Besides, the derived multifunctional applications in the fields of flexible thermal insulation (flexible thermal protection at extreme temperatures), flexible wearable electronics (flexible sensors, flexible electrodes, electromagnetic shielding, and wave absorption), and environmental protection (oil/water separation and air filtration) are summarized. Furthermore, the future development prospects and challenges of flexible aerogel materials are also summarized. This review will provide a comprehensive research basis and guidance for the structural design, fabrication methods, and potential applications of flexible aerogels.

Universal Murray's law for optimised fluid transport in synthetic structures

Materials following Murray's law are of significant interest due to their unique porous structure and optimal mass transfer ability. However, it is challenging to construct such biomimetic hierarchical channels with perfectly cylindrical pores in synthetic systems following the existing theory. Achieving superior mass transport capacity revealed by Murray's law in nanostructured materials has thus far remained out of reach. We propose a Universal Murray's law applicable to a wide range of hierarchical structures, shapes and generalised transfer processes. We experimentally demonstrate optimal flow of various fluids in hierarchically planar and tubular graphene aerogel structures to validate the proposed law. By adjusting the macroscopic pores in such aerogel-based gas sensors, we also show a significantly improved sensor response dynamics. In this work, we provide a solid framework for designing synthetic Murray materials with arbitrarily shaped channels for superior mass transfer capabilities, with future implications in catalysis, sensing and energy applications.

Tailored fabrication of biodegradable polymer/ Fe3O4 doped WO3 nano star-based porous membrane with enhanced photo fentonic activity for environmental remediation

The accelerated development of special-wetting polymeric materials with hierarchical pores for membrane applications is crucial to effectively separating water-soluble and insoluble pollutants, such as oily wastewater, emulsion, organic pollutants, and heavy metals. This pressing environmental and socioeconomic issue requires the implementation of effective remediation technologies. In this study, we successfully fabricated an environmentally friendly membrane with a flexible property by combining biopolymers and magnetic nanohybrids of iron oxide (Fe3O4)-doped tungsten oxide (WO3) through a thermal-induced phase separation process (TIPS). The resulting membrane exhibited a well-defined 3D-interconnected porous network structure when blending poly (ε-caprolactone)/poly (D,L-lactide) (PCL)/(PDLLA) in an 8:2 volume ratio. The Fe3O4@WO3 nanohybrids were synthesized using a hydrothermal process, resulting in a star-shaped morphology from the sea urchin-like WO3 clusters, which showed great potential to efficiently separate water/oil contamination and facilitate visible-light-driven photocatalytic degradation of organic dyes (MB, Rh B, BY, and CR) and photoreduction of hexavalent chromium (Cr (VI)). The obtained PCL/PDLLA/Fe3O4@WO3 nanocomposite membrane demonstrated hydrophobic properties, showing a water contact angle of 95 ± 2° and an excellent oil adsorption capacity of ∼4-4.5 g/g without fouling. The interconnected porous structure of the composite membrane enabled the efficient separation of emulsions (≥99.4 %) and achieved a high permeation flux of up to 1524 L m-2 h-1 under gravity separation. Overall, we obtained a novel high-performance composite material with specialized wetting properties, offering significant potential for effectively removing insoluble and soluble organic contaminants from wastewater.

NaK alloy as a versatile reagent for template-free synthesis of porous metal- and metalloid-based nanostructures

Using the strong reduction potential of the liquid NaK-78 alloy, we present a new versatile template-free approach to the synthesis of porous metal- and metalloid-based nanomaterials. With this novel approach, NaK can be simultaneously used as an agent for reduction, structure directing, and pore formation without the use of additional reagents.

Hierarchical Porous N-Doped Carbon Particles Derived from ZIF-8 as Highly Efficient H2S Selective Oxidation Catalysts

In the selective oxidation of H2S, the catalytic activity over N-doped carbon-based catalysts is significantly influenced by the accessibility of active sites and the mass transfer rates of reactant molecules (e.g., H2S and O2) as well as generated sulfur monomers. Therefore, it is crucial for enhancing the initial performance via the controlled synthesis of carbon-based catalysts with highly exposed active sites and unique porous structures. Herein, we reported on an efficient strategy to synthesize nanosized N-doped carbon particles with hierarchical porous structures by directly pyrolyzing an oversaturated NaCl-encapsulated ZIF-8 precursor mixture. The introduction of NaCl not only serves as a pollution-free template to promote the formation of graphitic carbon layers but also acts as an intercalating agent to guide the derivation of hierarchical porous structures, as well as enhances the amount of active nitrogen species in the catalysts. As a result, the as-prepared H-NC800 catalyst shows excellent H2S selective oxidation performance (sulfur formation rate is 794 gsulfur·kgcat-1·h-1), good stability (>80 h), and antiwater vapor properties. The characterization results and DFT calculations indicate the crucial role of pyridinic N in the adsorbing and activating reactant molecules (H2S, O2). Furthermore, nanoscale N-doped carbon particles accelerated the rapid transport of generated sulfur monomers under a hierarchical porous structure. This investigation introduces a distinctive strategy for synthesizing ZIF-8-derived N-doped carbon nanosized with a hierarchical porous structure, while its efficient and stable H2S selective oxidation performance highlights significant potential for practical implementation in the industrial desulfurization process.

Advancements in Noble Metal-Decorated Porous Carbon Nanoarchitectures: Key Catalysts for Direct Liquid Fuel Cells

Noble-metal nanocrystals have emerged as essential electrode materials for catalytic oxidation of organic small molecule fuels in direct liquid fuel cells (DLFCs). However, for large-scale commercialization of DLFCs, adopting cost-effective techniques and optimizing their structures using advanced matrices are crucial. Notably, noble metal-decorated porous carbon nanoarchitectures exhibit exceptional electrocatalytic performances owing to their three-dimensional cross-linked porous networks, large accessible surface areas, homogeneous dispersion (of noble metals), reliable structural stability, and outstanding electrical conductivity. Consequently, they can be utilized to develop next-generation anode catalysts for DLFCs. Considering the recent expeditious advancements in this field, this comprehensive review provides an overview of the current progress in noble metal-decorated porous carbon nanoarchitectures. This paper meticulously outlines the associated synthetic strategies, precise microstructure regulation techniques, and their application in electrooxidation of small organic molecules. Furthermore, the review highlights the research challenges and future opportunities in this prospective research field, offering valuable insights for both researchers and industry experts.

High-fidelity synthesis of microhole templates with low-surface-energy-enabled self-releasing photolithography

Material patterning through templates has provided an efficient way to meet the critical requirement for surface function in various fields. Here, we develop a self-releasing photolithographic process to make large-area freestanding templates with precise patterns. The low surface energy of substrates by hydrophobic treatment with proper silane modification ensures the template self-releasing. This method eliminates the need of mechanical separation or any sacrificial layers. Major steps including UV exposure and baking are optimized to realize high-quality structures and the final release of templates. The negative photoresists of SU-8 and polyimide are chosen to confirm the feasibility of this process. Wafer-scale freestanding templates with uniform microhole arrays are obtained with high structural fidelity, smooth surfaces and excellent flexibility. The hole size ranges from several to several tens of micrometers with an extremely low variation (<1%). These advantages could promote the application of precisely structured templates for surface patterning in material and surface science.

Influence of citric acid concentrations on the porosity and performance of cellulose acetate-based porous membranes: A comprehensive study

This study investigates the influence of citric acid concentration on the fabrication of porous cellulose acetate (CA) membranes using the Non-Solvent Induced Phase Separation (NIPS) method. A notable aspect is the precise control over membrane properties, particularly pore size and porosity, achieved solely through the adjustment of citric acid concentration, serving as the additive. Higher concentrations of citric acid increase pore size by rendering polymer chains more pliable, whereas lower concentrations lead to smaller, denser pores due to improved dispersion in the CA matrix and altered water interactions during phase separation. A decrease in porosity and Gurley values with reducing citric acid concentrations (from 5 × 10-2 to 1 × 10-3 M ratios) indicates less plasticization of CA chains. However, at very low concentrations (1 × 10-4 and 1 × 10-5), porosity increases, despite the presence of smaller pores, and Gurley values approach those of pure CA in terms of gas permeability. Fourier Transform Infrared (FT-IR) spectroscopy confirms the presence of citric acid and its interaction with carbonyl groups, consistent with the pore size observations from Scanning Electron Microscopy (SEM). Spectral data deconvolution reveals weakened carbonyl bonds due to the reduced presence of citric acid, correlating with the smaller pores observed in SEM. Thermal Gravimetric Analysis (TGA) demonstrates that composite membranes are more thermally stable than pure CA, attributed to the citric acid-induced crosslinking within the polymer chains. Stability increases with decreasing citric acid concentration, with some anomalies at the lowest levels. In conclusion, this study highlights the capability of adjusting citric acid concentration to tailor membrane properties, offering valuable insights for the creation of porous materials across diverse industrial applications.

Nerve Growth Factor-Preconditioned Mesenchymal Stem Cell-Derived Exosome-Functionalized 3D-Printed Hierarchical Porous Scaffolds with Neuro-Promotive Properties for Enhancing Innervated Bone Regeneration

The essential role of the neural network in enhancing bone regeneration has often been overlooked in biomaterial design, leading to delayed or compromised bone healing. Engineered mesenchymal stem cells (MSCs)-derived exosomes are becoming increasingly recognized as potent cell-free agents for manipulating cellular behavior and improving therapeutic effectiveness. Herein, MSCs are stimulated with nerve growth factor (NGF) to regulate exosomal cargoes to improve neuro-promotive potential and facilitate innervated bone regeneration. In vitro cell experiments showed that the NGF-stimulated MSCs-derived exosomes (N-Exos) obviously improved the cellular function and neurotrophic effects of the neural cells, and consequently, the osteogenic potential of the osteo-reparative cells. Bioinformatic analysis by miRNA sequencing and pathway enrichment revealed that the beneficial effects of N-Exos may partly be ascribed to the NGF-elicited multicomponent exosomal miRNAs and the subsequent regulation and activation of the MAPK and PI3K-Akt signaling pathways. On this basis, N-Exos were delivered on the micropores of the 3D-printed hierarchical porous scaffold to accomplish the sustained release profile and extended bioavailability. In a rat model with a distal femoral defect, the N-Exos-functionalized hierarchical porous scaffold significantly induced neurovascular structure formation and innervated bone regeneration. This study provided a feasible strategy to modulate the functional cargoes of MSCs-derived exosomes to acquire desirable neuro-promotive and osteogenic potential. Furthermore, the developed N-Exos-functionalized hierarchical porous scaffold may represent a promising neurovascular-promotive bone reparative scaffold for clinical translation.

Hierarchically Porous Covalent Organic Frameworks: Synthesis Methods and Applications

Covalent organic frameworks (COFs) with high porosity have garnered considerable interest for various applications owing to their robust and customizable structure. However, conventional COFs are hindered by their narrow pore size, which poses limitations for applications such as heterogeneous catalysis and guest delivery that typically involve large molecules. The development of hierarchically porous COF (HP-COF), featuring a multi-scale aperture distribution, offers a promising solution by significantly enhancing the diffusion capacity and mass transfer for larger molecules. This review focuses on the recent advances in the synthesis strategies of HP-COF materials, including topological structure design, in-situ templating, monolithic COF synthesis, defect engineering, and crystalline self-transformation. The specific operational principles and affecting factors in the synthesis process are summarized and discussed, along with the applications of HP-COFs in heterogeneous catalysis, toxic component treatment, optoelectronics, and the biomedical field. Overall, this review builds a bridge to understand HP-COFs and provides guidance for further development of them on synthesis strategies and applications.

A Versatile Shaping Method of Very-High Loading Porous Solids Paper Adsorbent Composites

Owing to their high porosity and tunability, porous solids such as metal-organic frameworks (MOFs), zeolites, or activated carbons (ACs) are of great interest in the fields of air purification, gas separation, and catalysis, among others. Nonetheless, these materials are usually synthetized as powders and need to be shaped in a more practical way that does not modify their intrinsic property (i.e., porosity). Elaborating porous, freestanding and flexible sheets is a relevant shaping strategy. However, when high loadings (>70 wt.%) are achieved the mechanical properties are challenged. A new straightforward and green method involving the combination softwood bleached kraft pulp fibers (S) and nano-fibrillated cellulose (NFC) is reported, where S provides flexibility while NFC acts as a micro-structuring and mechanical reinforcement agent to form high loadings porous solids paper sheets (>70 wt.%). The composite has unobstructed porosity and good mechanical strength. The sheets prepared with various fillers (MOFs, ACs, and zeolites) can be rolled, handled, and adapted to different uses, such as air purification. As an example of potential application, a MOF paper composite has been considered for the capture of polar volatile organic compounds exhibiting better performance than beads and granules.

Turmeric extract-mediated biogenic synthesis of Ag@SeO2 magnetic nanoparticles: characterization, optimization, antibacterial and antioxidant activities

This study bio-synthesized Ag@SeO2 bmNPs successfully, using turmeric ethanol extract, and characterized them using various techniques. The FT-IR analysis reveals the involvement of these plant-derived compounds, especially phenolics, in the reduction process by acting as electron donors and stabilizing/capping agents. Zeta potential analysis showed a slight negative surface charge for the stability of Ag@SeO2 NPs, where TEM revealed spherical nanoparticles with an average size of 20 nm. The XRD confirmed crystallinity and a core-shell structure, and EDX identified elements consistent with Ag@SeO2 and a 3 : 1 Ag/Se atomic ratio. Further, SEM supported the spherical shape and uniform size. These findings highlight the successful biosynthesis of Ag@SeO2 bmNPs with promising properties for diverse applications. Moreover, the Box-Behnken design (BBD) and artificial neural network (ANN) model were engaged to optimize Ag@SeO2 bmNP biosynthesis. BBD identified significant influences of pH, bioconversion temperature, time, and turmeric concentration on bmNP yield, with adjusted R2 and predictive R2 being 0.9075 and 0.8829, respectively. However, its limitations were revealed by a significant lack of fit. ANN modeling with a 3-5-7-1 topology showed superior predictive accuracy and identified optimal conditions for maximizing yield (pH 9.83, 51.7 °C, 1.0 h, 3.71 mg mL-1 turmeric). Validation experiments confirmed the model's reliability. Turmeric extract exhibited significantly higher amounts of phenolics, and flavonoids compared to the bmNPs, suggesting its potential for strong antioxidant activity. Both turmeric extract and bmNPs displayed antioxidant activity in ABTS and DPPH assays, with turmeric extract being the most potent due to its curcuminoid content. The potential activity of Ag@SeO2 bmNPs against S. aureus, K. pneumonia, E. coli, and B. cereus was investigated, with inhibition zones ranging from 22 to 32 mm. The MIC values of tested NPs towards pathogenic bacteria ranged from 165.625 and 331.25 μg mL-1.

Poly(N,N-diethylacrylamide)-endowed spontaneous emulsification during the breath figure process and the formation of membranes with hierarchical pores

The spontaneous emulsification for the formation of water-in-oil (W/O) or oil-in-water (O/W) emulsions needs the help of at least one kind of the third component (surfactant or cosolvent) to stabilize the oil-water interface. Herein, with the water/CS2-soluble polymer poly(N,N-diethylacrylamide) (PDEAM) as a surfactant, the spontaneous formation of water-in-PDEAM/CS2 emulsions is reported for the first time. The strong affinity between PDEAM and water or the increase of PDEAM concentration will accelerate the emulsification process with high dispersed phase content. It is demonstrated that the spontaneous emulsification of condensed water droplets into the PDEAM/CS2 solution occurs during the breath figure process, resulting in porous films with two levels of pore sizes (i.e., micron and submicron). The emulsification degree and the amounts of submicron-sized pores increase with PDEAM concentration and solidifying time of the solution. This work brings about incremental interest in spontaneous emulsification that may happen during the breath figure process. The combination of these two simultaneous processes provides us with an option to build hierarchically porous structures with condensed and emulsified water droplets as templates. Such porous membranes may have great potential in fields such as separation, cell culture, and biosensing.

Advances in Nanomaterials and Composites Based on Mesoporous Materials as Antimicrobial Agents: Relevant Applications in Human Health

Nanotechnology has emerged as a cornerstone in contemporary research, marked by the advent of advanced technologies aimed at nanoengineering materials with diverse applications, particularly to address challenges in human health. Among these challenges, antimicrobial resistance (AMR) has risen as a significant and pressing threat to public health, creating obstacles in preventing and treating persistent diseases. Despite efforts in recent decades to combat AMR, global trends indicate an ongoing and concerning increase in AMR. The primary contributors to the escalation of AMR are the misuse and overuse of various antimicrobial agents in healthcare settings. This has led to severe consequences not only in terms of compromised treatment outcomes but also in terms of substantial financial burdens. The economic impact of AMR is reflected in skyrocketing healthcare costs attributed to heightened hospital admissions and increased drug usage. To address this critical issue, it is imperative to implement effective strategies for antimicrobial therapies. This comprehensive review will explore the latest scientific breakthroughs within the metal-organic frameworks and the use of mesoporous metallic oxide derivates as antimicrobial agents. We will explore their biomedical applications in human health, shedding light on promising avenues for combating AMR. Finally, we will conclude the current state of research and offer perspectives on the future development of these nanomaterials in the ongoing battle against AMR.

Crystalline porous organic salts

Crystalline porous organic salts (CPOSs), formed by the self-assembly of organic acids and organic bases through ionic bonding, possess definite structures and permanent porosity and have rapidly emerged as an important class of porous organic materials in recent years. By rationally designing and controlling tectons, acidity/basicity (pKa), and topology, stable CPOSs with permanent porosity can be efficiently constructed. The characteristics of ionic bonds, charge-separated highly polar nano-confined channels, and permanent porosity endow CPOSs with unique physicochemical properties, offering extensive research opportunities for exploring their functionalities and application scenarios. In this review, we systematically summarize the latest progress in CPOS research, describe the synthetic strategies for synthesizing CPOSs, delineate their structural characteristics, and highlight the differences between CPOSs and hydrogen-bonded organic frameworks (HOFs). Furthermore, we provide an overview of the potential applications of CPOSs in areas such as negative linear compression (NLC), proton conduction, rapid transport of CO2, selective and rapid transport of K+ ions, atmospheric water harvesting (AWH), gas sorption, molecular rotors, fluorescence modulation, room-temperature phosphorescence (RTP) and catalysis. Finally, the challenges and future perspectives of CPOSs are presented.

3D Carbon Microspheres with a Maze-Like Structure and Large Mesopore Tunnels Built From Rapid Aerosol-Confined Coherent Salt/Surfactant Templating

Hierarchically porous carbons with tailor-made properties are essential for applications wherein rich active sites and fast mass transfer are required. Herein, a rapid aerosol-confined salt/surfactant templating approach is proposed for synthesizing hierarchically porous carbon microspheres (HPCMs) with a maze-like structure and large mesopore tunnels for high-performance tri-phase catalytic ozonation. The confined assembly in drying microdroplets is crucial for coherent salt (NaCl) and surfactant (F127) dual templating without macroscopic phase separation. The HPCMs possess tunable sizes, a maze-like structure with highly open macropores (0.3-30 µm) templated from NaCl crystal arrays, large intrawall mesopore tunnels (10-45 nm) templated from F127, and rich micropores (surface area >1000 m2 g-1 ) and oxygen heteroatoms originated from NaCl-confined carbonization of phenolic resin. The structure formation mechanism of the HPCMs and several influencing factors on properties are elaborated. The HPCMs exhibit superior performance in gas-liquid-solid tri-phase catalytic ozonation for oxalate degradation, owing to their hierarchical pore structure for fast mass transfer and rich defects and oxygen-containing groups (especially carbonyl) for efficient O3 activation. The reactive oxygen species responsible for oxalate degradation and the influences of several structure parameters on performance are discussed. This work may provide a platform for producing hierarchically porous materials for various applications.

Unconventional seed-assisted strategy for Al-rich hierarchical ZSM-48 zeolite

Inferior diffusion capacity and insufficient acid density hinder the practical application of ZSM-48 zeolite. Finding a simple and practical strategy to simultaneously address these two defects remains a challenge. In response to this dilemma, we developed an unconventional seed-assisted synthesis strategy for Al-rich hierarchical ZSM-48 zeolite. This approach allows for achieving a broader range of silica to alumina ratio and accelerates the entire crystallization process through the selection of unconventional seeds. The synergy between the seed and organic template was demonstrated to play a pivotal role in facilitating nucleation. Direct evidence from 1H-29Si CP MAS NMR, TG, and IR results demonstrates that hexamethonium ions (HM2+) electrostatically adsorb at the defect sites on the seed, thereby promoting nucleation sites formation. Smaller seed crystals undergo more etching during the induction period, resulting in additional defects and enhanced nucleation ability. The obtained catalyst exhibits a diffusion time constant (Deff/L2) nine times that of conventional ZSM-48 zeolite when using p-xylene as a probe molecule. In m-xylene isomerization reaction, Al-rich hierarchical ZSM-48 demonstrates excellent stability along with higher selectivity and yield for p-xylene compared to typical ZSM-5 catalysts. Remarkably, long-term testing of 1000 h yields over 22.5 % of p-xylene, indicating the potential of this catalyst as an alternative for xylene isomerization reaction. This work not only advances the practical application process of ZSM-48 catalyst but also provides valuable insights for optimizing other zeolites.

Anisotropic Interface Successive Assembly for Bowl-Shaped Metal-Organic Framework Nanoreactors with Precisely Controllable Meso-/Microporous Nanodomains

Colloidal metal-organic framework (MOF) nanoparticles, with tailored asymmetric nanoarchitectures and hierarchical meso-/microporosities, have significant implications in high-performance nanocatalysts, nanoencapsulation carriers, and intricate assembly architectures. However, the methodology that could achieve precise control over the anisotropic growth of asymmetric MOF particles with tailored distributions of meso- and microporous regions has not yet been established. In this study, we introduce a facile anisotropic interface successive assembly approach to synthesize asymmetric core-shell MOF (ZIF-67) nanobowls with worm-like mesopores in the core and intrinsic micropores in the shell. Our synthesis pathway relies on anisotropic nucleation of mesoporous MOF nanohemispheres on emulsion interfaces through the cooperative assembly of surfactants and MOF precursors. This is followed by the growth of microporous MOF layers on both interfaces of mesoporous cores and emulsion droplets, resulting in a hierarchically porous core-shell nanostructure. By utilizing this multi-interface-driven approach, we enable the creation of diverse geometries and distributions of mesopores and micropores in asymmetric MOF nanoarchitectures. The obtained bowl-like meso-/microporous core-shell ZIF-67 particles exhibit enhanced catalytic activity for CO2 cycloaddition, attributed to reactant accumulation within the bowl-like architecture, active site accessibility in the open mesoporous core, and improved structural stability. Overall, our study provides insights and inspiration for exploring the intricate asymmetric nanostructures of hierarchically porous MOFs with diverse potential applications.

Non-Aqueous Poly(dimethylsiloxane) Organogel Sponges for Controlled Solvent Release: Synthesis, Characterization, and Application in the Cleaning of Artworks

Polydimethylsiloxane (PDMS) organogel sponges were prepared and studied in order to understand the role of pore size in an elastomeric network on the ability to uptake and release organic solvents. PDMS organogel sponges have been produced according to sugar leaching techniques by adding two sugar templates of different forms and grain sizes (a sugar cube template and a powdered sugar template), in order to obtain materials differing in porosity, pore size distribution, and solvent absorption and liquid retention capability. These materials were compared to PDMS organogel slabs that do not contain pores. The sponges were characterized by Fourier-transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) and compared with PDMS slabs that do not contain pores. Scanning electron microscopy (SEM) provided information about their morphology. X-ray micro-tomography (XMT) allowed us to ascertain how the form of the sugar templating agent influences the porosity of the systems: when templated with sugar cubes, the porosity was 77% and the mean size of the pores was ca. 300 μm; when templated with powdered sugar, the porosity decreased to ca. 10% and the mean pore size was reduced to ca. 75 μm. These materials, porous organic polymers (POPs), can absorb many solvents in different proportions as a function of their polarity. Absorption capacity, as measured by swelling with eight solvents covering a wide range of polarities, was investigated. Rheology data established that solvent absorption did not have an appreciable impact on the gel-like properties of the sponges, suggesting their potential for applications in cultural heritage conservation. Application tests were conducted on the surfaces of two different lab mock-ups that simulate real painted works of art. They demonstrated further that PDMS sponges are a potential innovative support for controlled and selective cleaning of works of art surfaces.

Interfacing metal organic frameworks with polymers or carbon-based materials: from simple to hierarchical porous and nanostructured composites

In the past few years, metal organic frameworks (MOFs) have been assembled with (bio)polymers and a series of carbon-based materials (graphene, graphene oxide, carbon nanotubes, carbon quantum dots, etc.) leading to a wide range of composites differing in their chemical composition, pore structure and functionality. The objective was mainly to overcome the limitations of MOFs in terms of mechanical properties, chemical stability and processability while imparting novel functionality (electron conductivity, (photo)catalytic activity, etc.) and hierarchical porosity. These composites were considered for numerous applications including gas/liquid adsorption and separation, (photo)catalysis, biomedicine, energy storage, conversion and so on. The performance of such composites depends strongly on their microstructural and physico-chemical properties which are mainly driven by the chemical strategies used to design and process such composites. In this perspective article, we propose to cover this topic and provide a useful survey of recent progress in the synthesis and design of MOFs-carbon material composites. This article will describe the development of composites with increasing complexity in terms of porous architecture, spatial structuration and organisation, and functionality.

Robustly Adherable Hierarchical Nanostructures via Self-Bonding and Self-Texturing of Aluminum Nitride for Applications in Highly Efficient Oil/Water Separation

The release of wastewater containing oily contaminants into water bodies and soils severely threatens the environment and human health. Although several conventional techniques are used in treating oil/water mixtures and emulsions, these methods are often expensive, time-consuming, and inefficient. Porous membranes or sponges are widely used in filtration or absorption, but their use is limited by their low separation efficiencies and secondary contamination. Recently, a novel technology that is designed to selectively separate oil from oil/water mixtures or emulsions by using materials with special wetting surfaces was developed. Superwetting surfaces may be used to selectively separate oils from emulsions. This approach enables the use of materials with relatively large pores, resulting in high throughput properties and efficiencies. In this study, a facile method is proposed for use in preparing a superhydrophobic-superoleophilic felt fabric for utilization in separating oil/water mixtures and emulsions. By hydrolyzing aluminum nitride nanopowders, the desired micro-/nanostructures may be successfully fabricated and firmly attached to a fabric surface without using a binder resin. This results in various materials with special wetting properties, regardless of their sizes and shapes and the successful separation of oil and water from oil/water mixtures and emulsions in harsh environments. This approach exhibits promise as a low-cost, scalable, and efficient method of separating oily wastewater, with the potential for use in wider industrial applications.

Materials Space-Tectonics: Atomic-level Compositional and Spatial Control Methodologies for Synthesis of Future Materials

Reactions occurring at surfaces and interfaces necessitate the creation of well-designed surface and interfacial structures. To achieve a combination of bulk material (i.e., framework) and void spaces, a meticulous process of "nano-architecting" of the available space is necessary. Conventional porous materials such as mesoporous silica, zeolites, and metal-organic frameworks lack advanced cooperative functionalities owing to their largely monotonous pore geometries and limited conductivities. To overcome these limitations and develop functional structures with surface-specific functions, the novel materials space-tectonics methodology has been proposed for future materials synthesis. This review summarizes recent examples of materials synthesis based on designing building blocks (i.e., tectons) and their hybridization, along with practical guidelines for implementing materials syntheses and state-of-the-art examples of practical applications. Lastly, the potential integration of materials space-tectonics with emerging technologies, such as materials informatics, is discussed.

Mixture Adsorption in Nanoporous Zeolite and at Its External Surface: In-Pore and Surface Selectivity

Using toluene, ethylene, and water as gas compounds with different representative molecular interactions, we perform atom-scale simulations for their mixtures to investigate the selectivity of the core nanoporosity and external surface in a prototypical zeolite. As expected, the overall behavior suggests that increasing the pressure of a given component promotes the desorption of the coadsorbing species. However, for water-toluene mixtures, we identify that the pseudohydrogen bonding between water and toluene leads to beneficial coadsorption as toluene adsorption in the low-pressure range promotes water adsorption. Moreover, when the zeolite is completely filled with water, toluene adsorption does not occur due to steric repulsion, and ethylene shows oversolubility as the amount of ethylene per water molecule is significantly larger than in bulk water. The underlying oversolubility mechanism is found to be due to localized ethylene adsorption in the density minima arising from the layering of water in nanoconfinement. Despite these specific effects, the relatively weak coadsorption effects in the zeolite nanoporosity, which are found to be reasonably captured using the ideal adsorbed solution theory, arise from the fact that adsorption of these gases having different molecular sizes occurs in distinct pore regions (channel type, channel intersection). Finally, in contrast to confinement in the nanoporosity, mixture adsorption at the external surface does not show coadsorption effects as it mostly follows the Henry regime. These results show that selectivity is mostly governed by the confinement effects as the external surface leads to a selectivity loss.

Synthesis of hierarchically porous zirconium-based metal-organic framework@silica core-shell stationary phase through etching strategy for liquid chromatography

Metal organic frameworks (MOFs) show promise to be employed as stationary phase for high performance liquid chromatography (HPLC), however, the microporous structures of MOFs seriously restrict the diffusion and mass transfer of solute molecules, leading to a low column efficiency. In this paper, the fabrication of hierarchically porous UiO-66@SiO2 (HP- UiO-66@SiO2) core-shell microspheres via H2O2 etching has been proposed as a viable approach to enhance the separation performance of MOFs-based columns for HPLC. Through the direct treatment of the preliminary prepared UiO-66@SiO2 microspheres with H2O2 etching, HP-UiO-66@SiO2 core-shell microspheres were successfully synthesized with an enlarged pore size of up to 9 nm, facilitating efficient mass transfer in chromatographic separation. The prepared HP-UiO-66@SiO2 core-shell microspheres were then explored as stationary phase in HPLC to separate the nonpolar alkyl benzene homologues, the polar aromatic alcohol homologues and the xylene isomers. The results indicated that the baseline separations of these solutes were achieved successfully with narrow peak width and higher resolution than the UiO-66@SiO2 column. The HP-UiO-66@SiO2 column exhibited superior separation performance, reaching a maximum plate number of 134,459/m for fluorene, and showing good reproducibility. As a result, this template-free approach suggests that the fabrication of hierarchically porous MOFs@silica core-shell microspheres is a successful approach to enhance the column efficiency of MOFs-based columns in HPLC.

Dynamic Cages-Towards Nanostructured Smart Materials

The interest in capsular assemblies such as dynamic organic and coordination cages has blossomed over the last decade. Given their chemical and structural variability, these systems have found applications in diverse fields of research, including energy conversion and storage, catalysis, separation, molecular recognition, and live-cell imaging. In the exploration of the potential of these discrete architectures, they are increasingly being employed in the formation of more complex systems and smart materials. This Review highlights the most promising pathways to overcome common drawbacks of cage systems (stability, recovery) and discusses the most promising strategies for their hybridization with systems featuring various dimensionalities. Following the description of the most recent advances in the fabrication of zero to three-dimensional cage-based systems, this Review will provide the reader with the structure-dependent relationship between the employed cages and the properties of the materials.

Creating Biomimetic Central-Radial Skeletons with Efficient Mass Adsorption and Transport

Porous skeletons play a crucial role in various applications. Their fundamental significance stems from their remarkable surface area and capacity to enhance mass adsorption and transport. Freeze-casting is a commonly utilized methodology for the production of porous skeletons featuring vertically aligned channels. Nevertheless, the resultant single-oriented skeleton displays anisotropic mass transfer characteristics and suboptimal mechanical properties. Our investigation was motivated by the intricate microstructures observed in botanical organisms, leading us to devise an advanced freeze-casting methodology. A novel central-radial skeleton with significantly enhanced capabilities has been successfully engineered. The central-radial architecture demonstrates superior refinement and uniformity in its pore structure, featuring an axial mass transfer axis and meticulously arranged radial channels. This microstructure endows the porous skeleton with a higher compression resilience, superior adsorption rate, and structural maintenance capacity. Through a rigorous examination of the thermal conductivity of skeleton-filled composites coupled with comprehensive COMSOL simulations, the exceptional characteristics of this unique structural arrangement have been definitively ascertained. Furthermore, the efficacy of implementing this skeleton in chip cooling and photothermal conversion has been convincingly substantiated. Our pioneering method of microstructure preparation, employing freeze-casting, holds immense potential in expanding its applicability and inspiring innovative concepts for the advancement of novel structures.

Unusual 3,4-Oxidative Coupling Polymerization on 1,2,5-Trisubstituted Pyrroles for Novel Porous Organic Polymers

Porous organic polymers (POPs) have demonstrated promising task-specific applications due to their structure designability and thus functionality. Herein, an unusual 3,4-polymerization on 1,2,5-trisubstituted pyrroles has been developed to give linear polypyrrole-3,4 in high efficiency, with Mn of 20000 and PDI of 1.7. This novel polymerization technique was applied to prepare a series of polypyrrole-based POPs (PY-POP-1-4), which exhibited high BET surface areas (up to 762 m2 g-1) with a meso-micro-supermicro hierarchically porous structure. Furthermore, PY-POPs were doped in the mixed matrix membranes based on the polysulfone matrix to enhance the gas permeability and gas pair selectivity, with H2/N2 selectivity up to 84.6 and CO2/CH4 and CO2/N2 selectivity up to 46.8 and 39.6.