Ce4+/Ce3+ Redox Effect-Promoted CdS/CeO2 Heterojunction Photocatalyst for the Atom Economic Synthesis of Imines under Visible Light

The employment of stoichiometric alcohols and amines for imine synthesis under mild and green reaction conditions is still a challenge in the field. In this work, based on our research foundation in the thermocatalytic synthesis of imines over ceria, a CdS/CeO2 heterojunction photocatalyst was constructed and successfully realized the atom-economic synthesis of imines under visible light without additives at room temperature. Mechanistic experiments and corresponding characterizations indicated that the CdS/CeO2 heterojunction can improve the separation efficiency of photogenerated carriers, which can be further enhanced by the Ce4+/Ce3+ redox pair by rapidly combining photogenerated e-. The in situ-reduced Ce3+ can better activate O2 to form Ce-O-O·, which, together with h+, efficiently accelerates alcohol oxidation, which is the rate-determined step for the synthesis of imines via oxidative coupling reaction of alcohol and amine. In addition, our photocatalyst exhibited fairly decent reusability and substrate universality. This work solves problems of using base additives and excess amine or alcohol in the reported photocatalytic systems and provides new insight for designing CeO2-based photocatalytic oxidation catalysts.

A mechanistic study of the photocatalytic activity of AgI–WO3 in an experimentally designed approach toward methylene blue photodegradation

The visible light-active AgI/WO3 binary photocatalyst has been characterized using XRD, FTIR spectroscopy, SEM-EDX, cyclic voltammetry (CV), photoluminescence (PL), and UV–vis DRS techniques.

Nano-architectural design of TiO2 for high performance photocatalytic degradation of organic pollutant: A review

In the past several decades, significant efforts have been paid toward photocatalytic degradation of organic pollutants in environmental research. During the past years, titanium dioxide nano-architectures (TiO₂ NAs) have been widely used in water purification applications with photocatalytic degradation processes under Uv/Vis light illumination. Photocatalysis process with nano-architectural design of TiO₂ is viewed as an efficient procedure for directly channeling solar energy into water treatment reactions. The considerable band-gap values and the subsequent short life time of photo-generated charge carriers are showed among the limitations of this approach. One of these effective efforts is the using of oxidation processes with advance semiconductor photocatalyst NAs for degradation the organic pollutants under UV/Vis irradiation. Among them, nano-architectural design of TiO₂ photocatalyst (such as Janus, yolk-shell (Y@S), hollow microspheres (HMSs) and nano-belt) is an effective way to improve oxidation processes for increasing photocatalytic activity in water treatment applications. In the light of the above issues, this study tends to provide a critical overview of the used strategies for preparing TiO₂ photocatalysts with desirable physicochemical properties like enhanced absorption of light, low density, high surface area, photo-stability, and charge-carrier behavior. Among the various nanoarchitectural design of TiO₂, the Y@S and HMSs have created a great appeal given their considerable large surface area, low density, homogeneous catalytic environment, favorable light harvesting properties, and enhanced molecular diffusion kinetics of the particles. In this review was summarized the developments that have been made for nano-architectural design of TiO2 photocatalyst. Additional focus is placed on the realization of interfacial charge and the possibility of achieving charge carriers separation for these NAs as electron migration is the extremely important factor for increasing the photocatalytic activity.

Yolk-shell ZnO@C-CeO2 ternary heterostructures with conductive N-doped carbon mediated electron transfer for highly efficient water splitting

Herein, carbon-incorporated yolk-shell ZnO@C-CeO₂ ternary heterostructures are employed as visible light responsive photocatalyst for highly efficient photoelectrochemical (PEC) water splitting. Compared to conventional ZnO/CeO₂ semiconductors, introduction of a thin PDA shell layer assures the generation of a conductive N-doped graphitic carbon layer after a calcination post-treatment with mesoporous hollow morphologies. The evaluation of PEC water splitting performance of ZnO@C-CeO₂ photoanodes reveals the maximum photocurrent density as 7.43 mA/cm² at 1.18 V RHE under light whereas almost no response is recorded at dark. These superior PEC H₂ evolution performance strongly implies efficient charge separation, facilitated charge transfer between photoanode and electrolyte interface as well as within the semiconductor bulk by means of rapid electron transfer ability of N-doped graphitic carbon layer and prolong life time of light inside yolk-shell structure. Furthermore, considerable depression in PL intensity of ZnO@C-CeO₂ photoanodes compared to ZnO clearly reveals a higher photon absorption due to the reflection of light in hollow region and increase in electron hole separation efficiency. Moreover, plausible Z-scheme charge transfer mechanism using ZnO@C-CeO₂ photoanodes under visible light illumination is verified using radical trapping experiments and X-ray photoelectron spectroscopy (XPS) methods, suggesting new generation of heterostructures for sufficient conversion of sunlight to H₂ fuels.

Photocatalytic degradation of 2,4-dichlorophenol using bio-green assisted TiO2-CeO2 nanocomposite system

In recent times, cost effective synthesis of semiconductor materials has been a subject of concern for the day to today applications. In this work, novelty has been made on the facile synthesis of metal oxides (TiO₂ and CeO₂) and nanocomposites (TiO₂-CeO₂) through sol-gel and precipitation methods of imparting lemon extract. The synthesized materials behave as the functional catalysts which has been further carried out for the photocatalytic degradation against 2,4-Dichlorophenol (2,4-DCP). The materials are then valued for the structural and optical properties. The lemon extract used in synthesis has played a premier role in upgrading the charge carrier separation, bandgap, and size reduction of the composite system. Further, the CeO₂ supported TiO₂ sample acts as the better visible light catalyst, due to the prevention of aggregation and existence of line dislocation that supported to access the additional electron trap sites.

A CeO2 Semiconductor as a Photocatalytic and Photoelectrocatalytic Material for the Remediation of Pollutants in Industrial Wastewater: A Review

The direct discharge of industrial wastewater into the environment results in serious contamination. Photocatalytic treatment with the application of sunlight and its enhancement by coupling with electrocatalytic degradation offers an inexpensive and green technology enabling the total removal of refractory pollutants such as surfactants, pharmaceuticals, pesticides, textile dyes, and heavy metals, from industrial wastewater. Among metal oxide—semiconductors, cerium dioxide (CeO2) is one of the photocatalysts most commonly applied in pollutant degradation. CeO2 exhibits promising photocatalytic activity. Nonetheless, the position of conduction bands (CB) and valence bands (VB) in CeO2 limits its application as an efficient photocatalyst utilizing solar energy. Its photocatalytic activity in wastewater treatment can be improved by various modification techniques, including changes in morphology, doping with metal cation dopants and non-metal dopants, coupling with other semiconductors, and combining it with carbon supporting materials. This paper presents a general overview of CeO2 application as a single or composite photocatalyst in the treatment of various pollutants. The photocatalytic characteristics of CeO2 and its composites are described. The main photocatalytic reactions with the participation of CeO2 under UV and VIS irradiation are presented. This review summarizes the existing knowledge, with a particular focus on the main experimental conditions employed in the photocatalytic and photoelectrocatalytic degradation of various pollutants with the application of CeO2 as a single and composite photocatalyst.

A novel UV-assisted PEC-MFC system with CeO2/TiO2/ACF catalytic cathode for gas phase VOCs treatment

Emissions of volatile organic compounds (VOCs) air pollutants could worsen air quality and adversely affect human health, thus developing more efficient low-temperature VOCs removal techniques is desired. A novel continuous system integrating UV-assisted photo-electrochemical catalysis with microbial fuel cell (UV-assisted PEC-MFC) has been established for promoting removal of gaseous ethyl acetate or toluene and generating electricity simultaneously. In this system, CeO₂/TiO₂/ACF catalytic cathode is prepared and used for combination with bio-anode for accelerating cathodic reaction. This UV-assisted PEC-MFC system exhibits an excellent elimination capacity (EC) of ethyl acetate (∼0.39 g/m³, EC: ∼2.52 g/m³/h) or toluene (∼0.29 g/m³, EC: 1.89 g/m³/h) under close-circuit condition. Furthermore, an outstanding elimination capacity (EC: 28.04 g/m³/h) for high concentration toluene (∼4.10 g/m³) removal is obtained after toluene gas passes sequentially through the catalytic cathode then the bio-anode. This way of PEC degradation and biodegradation, avoids inhibition of exoelectrogens activity from toxicity of high concentration toluene. Simultaneously, the cell voltage of UV-assisted PEC-MFC system is stable at 0.11 V (vs. SCE) and 1.452×10^-4 kWh is generated from treatment of toluene gas stream in 6 h duration time. The possible mechanism of VOCs removal in this novel system has been proposed and discussed. This study provides new technical basis for treating gaseous pollutants via integrating photo-electrochemical catalysis with electricity generating microbial fuel cell for energy conversion.

Development of CeO2 nanodot encrusted TiO2 nanoparticles with reduced photocatalytic activity and increased biocompatibility towards a human keratinocyte cell line

The cytotoxic and genotoxic effects of titanium dioxide (TiO2) nanoparticles when exposed to ultraviolet (UV) radiation, particularly wavelengths between 320-400 nm, has raised concern over their safe use in health and cosmetic related products such as sunscreens. Cerium dioxide (CeO2) nanoparticles have been demonstrated to display biocompatible properties and antioxidant activity due to redox cycling of the Ce3+/Ce4+ oxidation states. In this work, CeO2/TiO2 nanocomposites were prepared through a standard precipitation method at atomic concentrations (at%) of Ce relative to Ti of 2.5, 5 and 10 at%, with the aim of reducing the photocatalytic activity of the core TiO2 nanoparticles and improve biocompatibility. The UV absorptive properties of the nanocomposite samples revealed excellent absorbance across the UV region as compared to pristine TiO2 and CeO2. Furthermore, a drastic reduction in the photocatalysed decomposition of crystal violet, when in the presence of the nanocomposite samples, under both UV and solar simulated light was observed compared to the highly photoactive pristine TiO2. An optimal CeO2 nanodot loading, displaying both high UV attenuation and low photocatalytic performance was determined at 5 at% and further in vitro biological testing revealed minimal impact on the cell viability of the human keratinocyte cell line (HaCaT) over a 24 h period with and without prior exposure to UV irradiation. In contrast, pristine TiO2 nanoparticles induced toxicity to HaCaT cells with prior UV exposure before incubation, particularly at a dosage of 100 mg L-1. Our findings demonstrate the effectiveness of CeO2 nanodots in improving biocompatibility and its potential as a coating material for active inorganic UV filters.

A redox interaction-engaged strategy for multicomponent nanomaterials

The review article focuses on the redox interaction-engaged strategy that offers a powerful way to construct multicomponent nanomaterials with precisely-controlled size, shape, composition and hybridization of nanostructures.

Construction of Ni-doped SnO2-SnS2 heterojunctions with synergistic effect for enhanced photodegradation activity

Construction of heterostructures with proper band alignment and effective transport and separation of photogenerated charges is highly expected for photocatalysis. In this work, Ni-doped SnO₂-SnS₂ heterostructures (NiSnSO) are simply prepared by thermal oxidation of Ni-doped hierarchical SnS₂ microspheres in the air. When applied for the photodegradation of organic contaminants, these NiSnSO exhibit excellent catalytic performance and stability due to the following advantages: (1) Ni doping leads to the enhancement of light harvesting of SnS₂ in the visible light regions; (2) the formed heterojunctions promote the transport and separation of photogenerated electrons from SnS₂ to SnO₂; (3) Ni-SnO₂ quantum dots facilitate the enrichment of reactants, provide more reactive centers and accelerate product diffusion in the reactive centers; (4) the SnS₂ hierarchical microspheres constituted by nanoplates provide abundant active sites, high structural void porosity and accessible inner surface to faciliate the catalytic reactions. As a result, the optimized NiSnSO can photodegrade 92.7% methyl orange within 80 min under the irradiation of simulated sunlight, greatly higher than those of pure SnS₂ (29.8%) and Ni-doped SnS₂ (52.1%). These results reveal that the combination of heteroatom doping and heterostructure fabrication is a very promising strategy to deliver nanomaterials for effectively photocatalytic applications.

Rational design of yolk–shell nanostructures for photocatalysis

Yolk–shell structures provide an ideal platform for the rational regulation and effective utilization of charge carriers because of their void space and large surface areas. Furthermore, the efficiency of charge behavior in every step can be further improved by many strategies. This review describes the synthesis of yolk–shell structures and their effect for the enhancement of heterogeneous photocatalysis.

Hybrid TiO2/graphene derivatives nanocomposites: is functionalized graphene better than pristine graphene for enhanced photocatalytic activity?

Graphene (GR) and its derivatives are generally assumed to be electron shuttles in order to explain the improved photocatalytic activity of their nanocomposites (such as TiO₂/GR).