Construction of Z-scheme CdS/Ag/TiO2 NTs photocatalysts for photocatalytic dye degradation and hydrogen evolution

The ternary CdS/Ag/TiO₂ NTs photocatalysts with indirect Z-scheme heterojunctions were synthesized by the photoreduction deposition of Ag and successive ionic layer adsorption and reaction (SILAR) of CdS on TiO₂ nanotube arrays (TiO₂ NTs). The elemental composition, microstructure, photoresponse and photoelectrochemical property of the photocatalyst were systematically characterized. The results proved that compared with binary heterojunction, the light absorption range of the ternary CdS/Ag/TiO₂ NTs photocatalyst was significantly extended, and the photoelectron transportation efficiency was improved. Under sunlight irradiation, the photocatalytic capacity was verified by investigating the photodegradation of MB and RhB dyes. The CdS/Ag/TiO₂ NTs exhibited the optimal photocatalytic performance with the degradation efficiency of 82.24% for RhB and 100% for MB. The synthesized CdS/Ag/TiO₂ NTs had high photocatalytic hydrogen evolution capacity and stability, and the hydrogen production reached 806.33 μmol·cm^-2. Based on the results of electron spin resonance spectroscopy (ESR) and free radical trapping, the photocatalytic reaction mechanism was explained. The synthesis of ternary CdS/Ag/TiO₂ NTs provides a practical reference and guidance for designing high-efficient photocatalysts with Z-scheme heterojunctions toward solar energy development for H₂ generation, pollutant remediation and photoelectric conversion.

Z-Scheme Heterojunction of SnS2/Bi2WO6 for Photoreduction of CO2 to 100% Alcohol Products by Promoting the Separation of Photogenerated Charges

Using sunlight to convert CO₂ into solar fuel is an ideal solution to both global warming and the energy crisis. The construction of direct Z-scheme heterojunctions is an effective method to overcome the shortcomings of single-component or conventional heterogeneous photocatalysts for photocatalytic CO₂ (carbon dioxide) reduction. In this work, a composite photocatalyst of narrow-gap SnS₂ and stable oxide Bi₂WO₆ were prepared by a simple hydrothermal method. The combination of Bi₂WO₆ and SnS₂ narrows the bandgap, thereby broadening the absorption edge and increasing the absorption intensity of visible light. Photoluminescence, transient photocurrent, and electrochemical impedance showed that the coupling of SnS₂ and Bi₂WO₆ enhanced the efficiency of photogenerated charge separation. The experimental results show that the electron transfer in the Z-scheme heterojunction of SnS₂/Bi₂WO₆ enables the CO₂ reduction reactions to take place. The photocatalytic reduction of CO₂ is carried out in pure water phase without electron donor, and the products are only methanol and ethanol. By constructing a Z-scheme heterojunction, the photocatalytic activity of the SnS₂/Bi₂WO₆ composite was improved to 3.3 times that of pure SnS₂.

Aerobic Photocatalysis: Oxidation of Sulfides to Sulfoxides

Sulfoxides constitute one of the most important functional groups in organic chemistry found in numerous pharmaceuticals and natural products. Sulfoxides are usually obtained from the oxidation of the corresponding sulfides. Among various oxidants, oxygen or air are considered the greenest and most sustainable reagent. Photochemistry and photocatalysis is increasingly applied in new, as well as traditional, yet demanding, reaction, like the aerobic oxidation of sulfides to sulfoxides, since photocatalysis has provided the means to access them in mild and effective ways. In this review, we will summarize the photochemical protocols that have been developed for the oxidation of sulfides to sulfoxides, employing air or oxygen as the oxidant. The aim of this review is to present: i) a historical overview, ii) the key mechanistic studies and proposed mechanisms and iii) categorize the different catalytic systems in literature.

Z-Scheme In2 S3 /NU-1000 Heterojunction for Boosting Photo-Oxidation of Sulfide into Sulfoxide under Ambient Conditions

Photocatalytic oxidation of sulfide into sulfoxide has attracted extensive attention as an environmentally friendly strategy for chemical transformations or toxic chemicals degradation. Herein, we construct a series of In₂ S₃ /NU-1000 heterojunction photocatalysts, which can efficiently catalyze the oxidation of sulfides to form sulfoxides as the sole product under LED lamp (full-spectrum) illumination in air at room temperature. Especially, the sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES), can also be photocatalytically oxidized with In₂ S₃ /NU-1000 to afford nontoxic 2-chloroethyl ethyl sulfoxide (CEESO) selectively and effectively. In contrast, individual NU-1000 and In₂ S₃ show very low catalytic activity on this reaction. The significantly improved photocatalytic activity is ascribed to the constructing of an efficient Z-scheme photocatalysts In₂ S₃ /NU-1000, which exhibits the enhancement of light harvesting, the promotion of photogenerated electron-hole separation, and the retention of high porosity of the parent MOF. Moreover, mechanism studies in photocatalytic oxidation reveal that the superoxide radical (^. O₂ ^- ) and singlet oxygen (¹ O₂ ) are the main oxidative species in the oxidation system. This work exploits the opportunities for the construction of porous Z-scheme photocatalysts based on the photoactive MOFs materials and inorganic semiconductors for promoting catalytic organic transformations. More importantly, it provides a route to the rational design of efficient photocatalysts for the detoxification of mustard gas.

Surface decorated magnetic nanoparticles with Mn-porphyrin as an effective catalyst for oxidation of sulfides

Mn-porphyrin complex was anchored coordinatively to silica-coated surface of magnetic nanoparticles (SMNP). Afterward, a heterogeneous nanocatalyst (Fe3O4@SiO2-MnTCPP) has been characterized by Fourier transform infrared (FT-IR), ultraviolet-visible (UV-vis) spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), vibrating sample magnetometry (VSM), thermogravimetric analysis (TGA), and transmission electron microscope (TEM). A thermal stability up to around 350[Formula: see text]C was verified for prepared nanocatalyst based on thermogravimetric analysis. Finally, the catalytic performance of magnetically recoverable Mn-catalyst was exploited in the green oxidation of different sulfides with urea hydrogen peroxide (UHP) in the presence of imidazole as co-catalyst in ethanol under heterogeneous conditions. The eco-friendly property of ethanol strongly induced us to employ it as the reaction solvent in this oxidation system. Complete conversion ([Formula: see text]99) of sulfides to the corresponding sulfoxide or sulfones was obtained for ethyl phenyl sulfide, phenyl vinyl sulfide, diallyl sulfide, thiocyanatoethane, 2-ethyl mercaptoethanol and tetrahydrothiophene. Moreover, the recovered catalysts keep constant conversion yield up to at least three cycles.

Preparation condition optimization and stability of cubic phase CdS in photocatalytic hydrogen production

Cubic CdS prepared with a Cd : S ratio of 5 : 8 and an aging time of 6 h exhibits excellent activity and phase stability.

Manipulatable Interface Electric Field and Charge Transfer in a 2D/2D Heterojunction Photocatalyst via Oxygen Intercalation

Charge separation is the most important factor in determining the photocatalytic activity of a 2D/2D heterostructure. Despite the exclusive advantages of 2D/2D heterostructure semiconductor systems such as large surface/volume ratios, their use in photocatalysis is limited due to the low efficiency of charge separation and high recombination rates. As a remedy for the weak interlayer binding and low carrier transport efficiency in 2D/2D heterojunctioned semiconductors, we suggested an impurity intercalation method for the 2D/2D interface. PtS2/C3N4, as a prototype heterojunction material, was employed to investigate the effect of anion intercalation on the charge separation efficiency in a 2D/2D system using density functional theory. With oxygen intercalation at the PtS2/C3N4 interface, a reversed and stronger localized dipole moment and a built-in electric field were induced in the vertical direction of the PtS2/C3N4 interface. This theoretical work suggests that the anion intercalation method can be a way to control built-in electric fields and charge separation in designs of 2D/2D heterostructures that have high photocatalytic activity.

Sulfoxidation inside a hypercrosslinked microporous network nanotube catalyst

In the present work, a kind of efficient heterogeneous catalyst was synthesized from amine-functionalized hypercrosslinked bottlebrush copolymers of microporous network nanotubes (amine-MNNs) and Na₂WO₄.

Enhanced production of H2 under visible light via co-deposited Pt and Ir species on g-C3N4

Synergism between PtO-mediated electron transfer and IrO₂-mediated hole transfer enhanced the photocatalytic hydrogen evolution of g-C₃N₄.

Kinetic and mechanistic aspects of solid state, nanostructured porphyrin diacid photosensitizers in photooxidation of sulfides

The kinetics and mechanism of aerobic photooxidation of sulfides in the presence of a series of electron-rich and electron-deficient porphyrins immobilized on Amberlyst 15 nanoparticles in the form of porphyrin diacids are reported.

Metal- and Additive-Free Oxidation of Sulfides into Sulfoxides by Fullerene-Modified Carbon Nitride with Visible-Light Illumination

Photocatalytic selective oxidation has attracted considerable attention as an environmentally friendly strategy for organic transformations. Some methods have been reported for the photocatalytic oxidation of sulfides into sulfoxides in recent years. However, the practical application of these processes is undermined by several challenges, such as low selectivity, sluggish reaction rates, the requirement of UV-light irradiation, the use of additives, and the instability of the photocatalyst. Herein, a metal-free C₆₀ /graphitic carbon nitride (g-C₃ N₄ ) composite photocatalyst was fabricated by a facile method, and well characterized by TEM, SEM, FTIR spectroscopy, XRD, X-ray photoelectron spectroscopy, diffuse reflectance spectroscopy, and photoluminescence spectroscopy. The C₆₀ /g-C₃ N₄ catalyst exhibited a high photocatalytic activity at room temperature for the selective oxidation of sulfides into the corresponding sulfoxides in the presence of other functional groups, due to the synergetic roles of C₆₀ and g-C₃ N₄ . Several important parameters have been screened, and this method afforded good to excellent yields of sulfoxides under optimal conditions. The superoxide radical (^. O₂^- ) and singlet oxygen (¹ O₂ ) were identified as the oxidative species for the oxidation of sulfides into sulfoxides by exploring EPR experiments, and hence, a plausible mechanism for this oxidation was proposed. Moreover, the C₆₀ /g-C₃ N₄ catalyst can be easily recovered by filtration and then reused at least four times without loss in activity.

Heterogeneously Catalyzed Aerobic Oxidation of Sulfides with a BaRuO3 Nanoperovskite

A rhombohedral BaRuO₃ nanoperovskite, which was synthesized by the sol-gel method using malic acid, could act as an efficient heterogeneous catalyst for the selective oxidation of various aromatic and aliphatic sulfides with molecular oxygen as the sole oxidant. BaRuO₃ showed much higher catalytic activities than other catalysts, including ruthenium-based perovskite oxides, under mild reaction conditions. The catalyst could be recovered by simple filtration and reused several times without obvious loss of its high catalytic performance. The catalyst effect, ¹⁸O-labeling experiments, and kinetic and mechanistic studies showed that substrate oxidation proceeds with oxygen species caused by the solid. The crystal structure of ruthenium-based oxides is crucial to control the nature of the oxygen atoms and significantly affects their oxygen transfer reactivity. Density functional theory calculations revealed that the face-sharing octahedra in BaRuO₃ likely are possible active sites in the present oxidation in sharp contrast to the corner-sharing octahedra in SrRuO₃, CaRuO₃, and RuO₂. The superior oxygen transfer ability of BaRuO₃ is also applicable to the quantitative conversion of dibenzothiophene into the corresponding sulfone and gram-scale oxidation of 4-methoxy thioanisole, in which 1.20 g (71% yield) of the analytically pure sulfoxide could be isolated.

In Situ Preparation of CoP@CdS and Its Catalytic Activity toward Controlling Nitro Reduction under Visible-Light Irradiation

CoP was synthesized in situ on the surface of CdS nanowires using a cobalt-ammine complex as a precursor. The generated CoP@CdS photocatalyst was well characterized by X-ray diffraction, transmission electron microscopy, selected-area electron diffraction, and diffuse reflectance spectra. A more efficient charge transfer was successfully achieved owing to the close contact between CoP and CdS. The hybrid photocatalyst showed excellent activity for the reduction of nitroarenes to the corresponding anilines or azobenzene compounds in water. In present work, hydrogen evolution and nitro reduction were concurrent and with the consumption of substrate, the rate of hydrogen evolution increased. The driving force for the reduction originated from the activated hydrogen species in the photocatalytic reaction rather than from dihydrogen. The photocatalytic activity of as-prepared CoP@CdS in situ is comparable to that of the catalysts formed using a noble metal loaded onto CdS. Mechanistic investigation showed that the condensation route is the major pathway for nitro reduction in the present system, and azo compounds could be obtained with less irradiation time, while aniline will be obtained via long-time irradiation.

Ultra-low-temperature growth of CdS quantum dots on g-C3N4 nanosheets and their photocatalytic performance

CdS quantum dots deposited on carbon nitride (g-C₃N₄) nanosheets have been synthesized by ultra-low temperature (−60 °C) liquid phase precipitation reactions.

Simple low cost porphyrinic photosensitizers for large scale chemoselective oxidation of sulfides to sulfoxides under green conditions: targeted protonation of porphyrins

Large scale chemoselective photooxidation of sulfides to sulfoxides in the presence of the diacids ofmeso-tetra(phenyl)porphyrin with different acids is reported.

Photocatalytic oxidation of arylalcohols to aromatic aldehydes promoted by hydroxyl radicals over a CoP/CdS photocatalyst in water with hydrogen evolution

Hydroxyl free radicals generated by visible-light-catalyzed water splitting over CoP/CdS drive the oxidation of arylalcohols with hydrogen evolution.

Graphene Oxide Foam Supported Titanium(IV): Recoverable Heterogeneous Catalyst for Efficient, Selective Oxidation of Arylalkyl Sulfides to Sulfoxides Under Mild Conditions

An efficient and environmentally friendly method was designed for the oxidation of sulfides to sulfoxides with a recyclable, carbon-skeleton-based heterogeneous catalyst developed by titanium sulfate [Ti(SO₄)₂] mineralization on the surface of graphene oxide foam [Ti(SO₄)₂@GOF] by using 30 wt% H₂O₂ as oxidant. Several different substituted sulfides were examined to explore the scope of substrates of the selective oxidation. The excellent reusability and durability of Ti(SO₄)₂@GOF was demonstrated by recycling experiments and the catalyst was further applied in the preparation of pantoprazole sodium in a one-pot process.

Construction of stable core–shell imprinted Ag-(poly-o-phenylenediamine)/CoFe2O4 photocatalyst endowed with the specific recognition capability for selective photodegradation of ciprofloxacin

The stable core–shell imprinted Ag-POPD/CoFe₂O₄ photocatalyst not only possessed high photocatalytic activity, but also exhibited the superior specific recognition capability for selective photodegradation of CIP.