Application of chiral recyclable catalysts in asymmetric catalysis

Chiral drugs hold a significant position within the contemporary pharmaceutical market, and the chiral catalysts play a crucial role in their synthesis. However, current chiral catalysts encounter challenges pertaining to their separation from products and the recycling process. The utilization of chiral recyclable catalysts not only reduces production costs but also aligns with the growing emphasis on environmentally-friendly chiral synthetic chemistry. These recyclable catalysts exhibit diverse carriers and distinct characteristics. Chemists employ the distinctive attributes of individual carriers to render them recyclable, thereby yielding time and cost savings. This review examines the asymmetric recyclable catalytic reactions reported between January 2017 and October 2023, categorizing them based on carrier solubility, and elucidates the loading techniques, catalytic impacts, recovery approaches, and recycling processes associated with these carriers.

Lead Sequestration in Perovskite Photovoltaic Device Encapsulated with Water-Proof and Adhesive Poly(ionic liquid)

The inevitable usage of toxic lead impedes the commercialization of lead halide perovskite solar cells, especially considering lead ions potentially unseals from the discarded and damaged devices and consequently contaminates the environment. In this work, we proposed a poly(ionic liquid) (PIL) cohered sandwich structure (PCSS) to realize lead sequestration in perovskite solar cells by a water-proof and adhesive poly([1-(3-propionic acid)-3-vinylimidazolium] bis(trifluoromethanesulphonyl)imide (PPVI-TFSI). A transparent ambidextrous protective shield manufactured from PPVI-TFSI was achieved and applied in lead sequestration for perovskite solar cells. PCSS provides robustness and water-resistance, which improves device stability toward water erosion and extreme situations (such as acid, base, salty water, and hot water). PPVI-TFSI exhibited excellent affinity toward lead with adsorption capacity of 516 mg·g^-1, which assisted to prevent lead leakage in abandoned devices as proved in the test of wheat germination vividly. PCSS provides a promising solution for complex lead sequestration and management issues, which contribute to the commercialization of perovskite solar cells.

Enabling Efficient Aerobic 5-Hydroxymethylfurfural Oxidation to 2,5-Furandicarboxylic Acid in Water by Interfacial Engineering Reinforced Cu-Mn Oxides Hollow Nanofiber

Herein, a one-dimensional hollow nanofiber catalyst composed of tightly packed multiphase metal oxides of Mn₂ O₃ and Cu_1.4 Mn_1.6 O₄ was constructed by electrospinning and tailored thermal treatment procedure. The characterization results comprehensively confirmed the special morphology and composition of various comparative catalysts. This strategy endowed the catalyst with abundant interfacial characteristics of components Mn₂ O₃ and Cu_1.4 Mn_1.6 O₄ nanocrystal. Impressively, the tuning thermal treatment resulted in tailored Cu^I sites and surface oxygen species of the catalyst, thus affording optimized oxygen vacancies for reinforced oxygen adsorption, while the concomitant enhanced lattice oxygen activity in the constructed composite catalyst ensured the higher catalytic oxidation ability. More importantly, the regulated proportion of oxygen vacancy and lattice oxygen in the composite catalyst was obtained in the best catalyst, beneficial to accelerate the reaction cycle. Compared to other counterparts obtained by different temperatures, the CMO-500 sample exhibited superior selective aerobic 5-hydroxymethylfurfural (HMF) oxidation to 2,5-furandicarboxylic acid (FDCA, 96 % yield) in alkali-bearing aqueous solution using O₂ at 120 °C, which resulted from the above-mentioned composition optimization and interfacial engineering reinforced surface oxygen consumption and regeneration cycle. The reaction mechanism was further proposed to uncover the lattice oxygen and oxygen vacancy participating HMF conversion process.

Recent Approaches in the Catalytic Transformation of Biomass-Derived 5-Hydroxymethylfurfural into 2,5-Diformylfuran

The conversion of biomass into a great variety of valuable chemicals, polymers, and fuels gives a sustainable alternative for the insufficiency of non-renewable fossil fuel resources and reduces environmental pollution. 5-Hydroxymethylfurfural (HMF), converted from sustainable carbohydrates, is a significant building block chemical, and the selective oxidation of HMF into 2,5-diformylfuran (DFF) presents an ongoing challenge. DFF is a versatile platform molecule derived from biomass and has promising application in pharmaceuticals and polymers. This Review provides an overview of the latest developments of efficient catalytic systems for the sustainable conversion of HMF to DFF.

A GPx-mimetic copper vanadate nanozyme mediates the release of nitric oxide from S-nitrosothiols

Although reactive oxygen and nitrogen species (ROS/RNS), such as hydrogen peroxide (H₂O₂), nitric oxide (NO), hydroxyl radicals (OH˙), superoxide (O₂^-) etc., play crucial roles in redox biology and cellular signaling, higher concentrations of these species lead to oxidative and nitrosative stress, which are associated with various pathophysiological conditions like neurodegeneration, cardiovascular diseases and cancer. There is growing evidence that functional impairment of the endothelium is one of the first recognizable signs of the development of atherosclerotic cardiovascular disease. A decreased bioavailability of NO and increased generation of ROS are the two major molecular changes associated with endothelial dysfunction. Therefore, it is a viable strategy to increase the bioavailability of NO while reducing the amount of ROS to prevent the progression of cardiovascular diseases. In this paper, we discuss for the first time that copper vanadate (CuV₂O₆) can not only release NO from S-nitrosothiols but can also control the ROS levels by functionally mimicking the antioxidant enzyme glutathione peroxidase (GPx) at physiological pH. We used several imaging techniques and spectroscopic measurements to understand the catalysis on the surface of the material during the reactions. The denitrosylation, as well as GPx-like activity, by CuV₂O₆ can be carried out multiple times without affecting the catalytic activity.

A highly crosslinked, mesoporous poly(ionic liquid) containing salen–Pd for efficient, eco-friendly Suzuki–Miyaura coupling reactions

Mesoporous poly(ionic liquid) obtained by hyper-crosslinking of a salen-containing poly(ionic liquid) can efficiently catalyze Suzuki–Miyaura coupling reactions with excellent recyclability under an air atmosphere in 50% aqueous ethanol.

Cross-Linking and Evaluation of the Thermo-Mechanical Behavior of Epoxy Based Poly(ionic Liquid) Thermosets

Poly(ionic liquids) (PILs) and ionenes are polymers containing ionic groups in their repeating units. The unique properties of these polymers render them as interesting candidates for a variety of applications, such as gas separation membranes and polyelectrolytes. Due to the vast number of possible structures, numerous synthesis protocols to produce monomers with different functional groups for task-specific PILs are reported in literature. A difunctional epoxy-IL resin was synthesized and cured with multifunctional amine and anhydride hardeners and the thermal and thermomechanical properties of the networks were assessed via differential scanning calorimetry and dynamic mechanical analysis. By the selection of suitable hardeners, the glass transition onset temperature (Tg,onset) of the resulting networks was varied between 18 °C and 99 °C. Copolymerization of epoxy-IL with diglycidyl ether of bisphenol A (DGEBA) led to a further increase of the Tg,onset. The results demonstrate the potential of epoxy chemistry for tailorable PIL networks, where the hardener takes the place of the ligands without requiring an additional synthesis step and can be chosen from a broad range of commercially available compounds.

Fabrication of ordered mesoporous POMs/SiO2-NH2 nanofibers for production of DFF from 5-HMF for cellulose wastewater resource recovery

5-hydroxymethylfurfural (5-HMF) is a biomass cellulose platform product that can be transformed into the valuable resource 2,5-diformylfuran (DFF). Polyoxometalates (POMs) have important applications in resource recovery technologies and cellulose wastewater treatment. Ordered mesoporous H₅PMo₁₀V₂O₄₀/SiO₂-NH₂ (wt%) nanofibers (HPMoV/meso-SiO₂-NH₂ (wt%)) were synthesized by the combining in-situ fabrication and electrospinning techniques, using H₅PMo₁₀V₂O₄₀ (HPMoV) and organic-silica as precursors. Aiming the recovery and transformation of 5-HMF, aerobic oxidation of 5-HMF was explored using these nanofibers as catalysts, while the best yield of DFF (90.0%) was obtained upon HPMoV/meso-SiO₂-NH₂ (23%) nanofibers after 8 h at 120 °C using oxygen (1.0 MPa). The selectivity to DFF was improved by changing the hydrophilicity of the HPMoV@SiO₂ nanofibers to hydrophobicity by modifying SiO₂ nanofibers with -NH₂R compared to mesoporous SiO₂ nanofibers, which allowed the formed DFF to be isolated. In the recycling test, HPMoV@SiO₂-NH₂ showed good performance, and no leaching of active sites from SiO₂-NH₂ due to the interactions between them occurred after 10 cycles. The production of DFF from the real cellulosic wastewater was obtained with 118% yield based on 5-HMF conversion by HPMoV/meso-SiO₂-NH₂ (23) and oxygen, which was contributed to the one-pot conversion of sugar, furan and 5-HMF in the wastewater.

Synthesis and characterization of an α-MoO3 nanobelt catalyst and its application in one-step conversion of fructose to 2,5-diformylfuran

α-MoO3 nanobelts have been successfully synthesized and applied as a bifunctional catalyst for one-step conversion of fructose to DFF under atmospheric air.

Highly efficient and tunable visible-light-catalytic synthesis of 2,5-diformylfuran using HBr and molecular oxygen

This paper discloses that inexpensive hydrobromic acid (HBr) is active and highly selective to the photo-oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran (DFF) with dioxygen (O₂) or even with water under visible light illumination, which can achieve the highest 89.1% DFF yield in DMSO at 80 °C under pure O₂ atmosphere. More importantly, under bifunctional acid-photooxidation catalysis of HBr, fructose can be directly converted to DFF and its two-step cascade conversion in DMSO provides a far higher DFF yield (80.2%) than the one-step cascade conversion in MeCN (42.1%). The results of HMF photooxidation catalyzed by hydrohalic acids, free radical quenching tests and EPR spectrum support that the Br atom and superoxide (O₂⁻˙) anion radicals generated by HBr photolysis in O₂ are active species for the oxidation of HMF to DFF and their activities are adjusted by the reaction medium. This photo-synthetic protocol is very simple and practical, especially with low operating costs, showing a good industrial application prospect.

HBr is a very cheap and efficient bifunctional catalyst for the synthesis of DFF from the photooxidation of HMF by O₂ and from the cascade conversion of fructose via a one-step or especially the two-step protocol.

Theoretical study on molecular mechanism of aerobic oxidation of 5-hydroxymethylfurfural to 2,5-diformyfuran catalyzed by VO2+ with counterpart anion in N,N-dimethylacetamide solution

Vanadium-containing catalysts exhibit good catalytic activity toward the aerobic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformyfuran (DFF). The aerobic oxidation mechanism of HMF to DFF catalyzed by VO₂⁺ with counterpart anion in N,N-dimethylacetamide (DMA) solution have been theoretically investigated. In DMA solution, the stable VO₂⁺-containing complex is the four-coordinated [V(O)₂(DMA)₂]⁺ species. For the gross reaction of 2HMF + O₂ → 2DFF + 2H₂O, there are three main reaction stages, i.e., the oxidation of the first HMF to DFF with the reduction of [V(O)₂(DMA)₂]⁺ to [V(OH)₂(DMA)]⁺, the aerobic oxidation of [V(OH)₂(DMA)]⁺ to the peroxide [V(O)₃(DMA)]⁺, and the oxidation of the second HMF to DFF with the reduction of [V(O)₃(DMA)]⁺ to [V(O)₂(DMA)₂]⁺. The rate-determining reaction step is associated with the C–H bond cleavage of –CH₂ group of the first HMF molecule. The peroxide [V(O)₃(DMA)]⁺ species exhibits better oxidative activity than the initial [V(O)₂(DMA)₂]⁺ species, which originates from its narrower HOMO–LUMO gap. The counteranion Cl⁻ exerts promotive effect on the aerobic oxidation of HMF to DFF catalyzed by [V(O)₂(DMA)₂]⁺ species.

The rate-determining reaction step is associated with the C–H bond cleavage of –CH₂ group of the first HMF molecule oxidized by [V(O)₂(DMA)₂]⁺ species, while counteranion Cl⁻ exhibits catalytically promotive effect.

Modification of composite catalytic material CumVnOx@CeO2 core-shell nanorods with tungsten for NH3-SCR

Novel composite material CumVnOx-NF@Ce-MOF nanorods with a core-shell structure were successfully fabricated by the in situ growth of Ce-MOF on electrospun copper vanadate precursor nanofibers. Following calcination at 500, 600 and 700 °C, Cu2V2O7@CeO2, Cu3(VO4)2@CeO2 and Cu11O2(VO4)6@CeO2, respectively, were obtained. The CeO2 shell not only protected the copper vanadate nanofibers from breaking apart during the calcination process, but also induced an interaction between Ce, Cu and V species, which resulted in an excellent redox capacity. This revealed its potential as a catalyst for the selective catalytic reduction of nitrogen oxides with NH3 (NH3-SCR). Further surface modulation was accomplished by WOx anchoring on the shell of CumVnOx@CeO2. According to a series of characterizations, the crystallinity of surface ceria on CumVnOy@CeO2-WOx was apparently reduced and the amount of acid on its surface was also significantly increased. In addition, different calcination temperatures also had nonnegligible effects on the amount of surface acid as well as the redox capacity of the composite catalytic material CumVnOy@CeO2-WOx. With the largest total quantity of acid sites as well as a suitable balance between acidity and reducing ability, the Cu3(VO4)2@CeO2-WOx calcined at 600 °C exhibited satisfactory catalytic performance in the NH3-SCR process, and the NO conversion could remain above 90% at 230-380 °C.

Catalytic mechanisms of oxygen-containing groups over vanadium active sites in an Al-MCM-41 framework for production of 2,5-diformylfuran from 5-hydroxymethylfurfural

In the V-doped Al-MCM-41 framework, the [V-1] active site with a hydroxyl group displays better catalytic activity than the [V-0] active site without a hydroxyl group toward the oxidation of 5-hydroxymethylfurfural to 2,5-diformylfuran.

The one-step transformation of fructose to 2,5-diformylfuran over Ru metal supported on montmorillonite

Ruthenium metal supported on a montmorillonite (2 wt% Ru-MMT) catalyst have been synthesized and characterized. Catalyst found to be effective for the one-pot transformation of fructose to DFF showing an excellent yield with good recyclability.

Poly(ionic liquid) composites

This review highlights recent advances in the development of poly(ionic liquid)-based composites for diverse materials applications.

Fabrication of Trifunctional Polyoxometalate-Decorated Chitosan Nanofibers for Selective Production of 2,5-Diformylfuran

Trifunctional catalysts based on polyoxometalate (POM) decorating chitosan nanofibers (H₅ PMo₁₀ V₂ O₄₀ /chitosan nanofibers, abbreviated as HPMoV/CS-f), synthesized by using the electrospinning method, realized highly efficient oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran (DFF). Decorating chitosan nanofibers with POMs generated enhanced catalytic activity by merging their unique individual properties of redox ability, Brønsted acidity, basicity, and nanofiber structure with higher surface area. As a result, HPMoV/CS-f(25) (with 25 representing the POM amount) was found to be the most active catalyst in the aerobic oxidation of HMF, resulting in 94.1 % DFF yield at 96.2 % conversion in DMSO at 120 °C for 6 h, whereas 56.2 % DFF yield at 95.0 % conversion was obtained in water at 140 °C for 8 h. Importantly, DFF could be produced in one pot in one step to give 61.9 and 31.4 % yield, respectively, directly from fructose and glucose under the reaction conditions of 140 °C, 6 h in DMSO, which was owing to the suitable balance of Brønsted acidity and basicity of the trifunctional HPMoV/CS-f(25). Moreover, HPMoV/CS-f showed good stability and ability to be reused at least ten times without leaching of the POMs from the chitosan nanofibers.

One-Pot Synthesis of 2,5-Diformylfuran from Fructose by Bifunctional Polyaniline-Supported Heteropolyacid Hybrid Catalysts

We report the preparation of bifunctional hybrid catalysts by supporting H3PMo12O40 (PMo12) heteropolyacid (HPA) on polyaniline (PAN) or formyl-functionalized PAN (F-PAN) for the “one-pot” and “one-step” synthesis of 2,5-diformylfuran (DFF) from fructose via 5-hydroxymethylfurfural (HMF) intermediate. We show that the PMo12 HPA is the main active species for both fructose dehydration and HMF oxidation owing to its Brønsted acidic and redox characters. However, the anchoring of PMo12 on PAN reduces the Brønsted acidity by acid–base interaction between protons in HPA and quinoid diimine structure in PAN, thereby reducing the dehydration performance. We demonstrate that the catalytic dehydration performance of the hybrid catalyst could be strengthened by grafting formyl groups on PAN before HPA anchoring. The highest DFF yield of 76.7% is obtained by conducting the “one-pot” reaction over the 40-PMo12/F3-PAN catalyst at 413 K for 7 h in air, wherein the side-reactions of fructose or HMF degradation and HMF rehydration have been significantly reduced. This hybrid catalyst is reusable without significant activity loss, highlighting the designing of stable inorganic–organic hybrid catalysts for producing valuable hexose-derived platform chemicals.

The design and catalytic performance of molybdenum active sites on an MCM-41 framework for the aerobic oxidation of 5-hydroxymethylfurfural to 2,5-diformylfuran

The catalytic activity decreases as –(SiO)₃Mo(OH)(O) > –(SiO)₂Mo(O)₂ > –(O)₄–MoO.

Porous Polyelectrolytes: The Interplay of Charge and Pores for New Functionalities

The past decade has witnessed rapid advances in porous polyelectrolytes and there is tremendous interest in their synthesis as well as their applications in environmental, energy, biomedicine, and catalysis technologies. Research on porous polyelectrolytes is motivated by the flexible choice of functional organic groups and processing technologies as well as the synergy of the charge and pores spanning length scales from individual polyelectrolyte backbones to their nano-/micro-superstructures. This Review surveys recent progress in porous polyelectrolytes including membranes, particles, scaffolds, and high surface area powders/resins as well as their derivatives. The focus is the interplay between surface chemistry, Columbic interaction, and pore confinement that defines new chemistry and physics in such materials for applications in energy conversion, molecular separation, water purification, sensing/actuation, catalysis, tissue engineering, and nanomedicine.

One-pot tandem conversion of monosaccharides and disaccharides to 2,5-diformylfuran using a Ru nanoparticle-supported H-beta catalyst

Using a one-pot tandem approach, 2,5-diformylfuran is successfully synthesized in high yields from fructose, glucose and sucrose.

Aerobic oxidation of biomass-derived 5-hydroxymethylfurfural to 2,5-diformylfuran with cesium-doped manganese dioxide

Cesium-doped manganese dioxide (Cs/MnO_x) was prepared by a soft template method, and was found to be active for the selective oxidation of HMF to DFF with molecular oxygen.

Dehydration of glucose to 5-hydroxymethylfurfural and 5-ethoxymethylfurfural by combining Lewis and Brønsted acid

In this work, glucose was transformed into 5-hydroxymethylfurfural (HMF) and 5-ethoxymethylfurfural (EMF) in the presence of AlCl₃·6H₂O and a Brønsted solid acid catalyst (PTSA–POM).

Direct synthesis of V-containing all-silica beta-zeolite for efficient one-pot, one-step conversion of carbohydrates into 2,5-diformylfuran

V-containing all silica beta-zeolite exhibited high atom-efficiency in the direct synthesis of 2,5-diformylfuran from carbohydrates.