(E)-4-Methyl-N-((quinolin-2-yl)ethylidene)aniline as ligand for IIB supramolecular complexes: synthesis, structure, aggregation-induced emission enhancement and application in PMMA-doped hybrid material

Alternately π-Stacked Systems Assisted by o-Carborane: Dual Excimer Emission and Color Modulation by Bcage -Methylation

Herein, we report the unique solid-state excimer emission of three types of acridine-tethered o-carboranes with variable degrees of methylation at the o-carborane unit. They all showed columnar packing structures based on dimer formation, and two types of π-overlapping motifs were alternately stacked. From the photoluminescence (PL) measurements on the crystalline samples, it was found that three types of luminescence bands can simultaneously appear: monomer emission, excimer emission from the moderately π-stacked intra-dimer unit, and excimer emission from the widely π-stacked inter-dimer unit. Consequently, the PL colors were drastically changed by the steric effect of the methyl groups, with a strong correlation found between the π-overlapping and excimer character. In addition, variable-temperature PL measurements revealed that these PL species should be in thermal equilibrium at room temperature, with the intensity ratios sensitive toward temperature changes.

Dimerization-Induced Solid-State Excimer Emission Showing Consecutive Thermochromic Luminescence Based on Acridine-Modified o-Carboranes

Although excimer emission is a useful luminescent phenomenon for fabricating optical sensors and probes, it is difficult to apply excimer emission for film sensors due to critical concentration quenching in the solid state. Therefore, robust molecular designs for solid-state excimer emission are still being explored. One of the key examples is the previously reported acridine-ethynyl-o-carborane AcE1, which showed a bright solid-state excimer emission assisted by characteristic C_cageH···N interactions. In this paper, we report the newly synthesized acridine-diehynyl-o-carborane AcE2 and comprehensively compare it to AcE1. Both compounds had the same crystalline packing mode based on dimer formation, resulting in an efficient π-overlapping area and solid-state excimer emission. Variable-temperature photoluminescence (VT-PL) measurements revealed the consecutive thermochromic luminescence of these compounds. Finally, on the basis of the easily accessible spray-coating method, we constructed the thermochromic luminescent sensors on quartz substrates. According to the mechanistic studies, it is demonstrated that the design strategy based on a dimer-induced solid-state excimer should have great potential for applications as a molecular thermometer.

Quinoline Functionalized Schiff Base Silver (I) Complexes: Interactions with Biomolecules and In Vitro Cytotoxicity, Antioxidant and Antimicrobial Activities

A series of fifteen silver (I) quinoline complexes Q1-Q15 have been synthesized and studied for their biological activities. Q1-Q15 were synthesized from the reactions of quinolinyl Schiff base derivatives L1-L5 (obtained by condensing 2-quinolinecarboxaldehyde with various aniline derivatives) with AgNO₃, AgClO₄ and AgCF₃SO₃. Q1-Q15 were characterized by various spectroscopic techniques and the structures of [Ag(L1)₂]NO₃Q1, [Ag(L1)₂]ClO₄Q6, [Ag(L2)₂]ClO₄Q7, [Ag(L2)₂]CF₃SO₃Q12 and [Ag(L4)₂]CF₃SO₃Q14 were unequivocally determined by single crystal X-ray diffraction analysis. In vitro antimicrobial tests against Gram-positive and Gram-negative bacteria revealed the influence of structure and anion on the complexes' moderate to excellent antibacterial activity. In vitro antioxidant activities of the complexes showed their good radical scavenging activity in ferric reducing antioxidant power (FRAP). Complexes with the fluorine substituent or the thiophene or benzothiazole moieties are more potent with IC₅₀ between 0.95 and 2.22 mg/mL than the standard used, ascorbic acid (2.68 mg/mL). The compounds showed a strong binding affinity with calf thymus-DNA via an intercalation mode and protein through a static quenching mechanism. Cytotoxicity activity was examined against three carcinoma cell lines (HELA, MDA-MB231, and SHSY5Y). [Ag(L2)₂]ClO₄Q7 with a benzothiazole moiety and [Ag(L4)₂]ClO₄Q9 with a methyl substituent had excellent cytotoxicity against HELA cells.

Fluorescence sensors for detection of water based on tetraphenylethene–anthracene possessing both solvatofluorochromic properties and aggregation-induced emission (AIE) characteristics

TPE-(An-CHO)4 has been developed as an SFC (solvatofluorochromism)/AIEE (aggregation-induced emission enhancement)-based fluorescence sensor for detection of water over a wide range from low to high water content regions in solvents.

Development of optical sensor for water in acetonitrile based on propeller-structured BODIPY-type pyridine-boron trifluoride complex

A propeller-structured 3,5,8-trithienyl-BODIPY-type pyridine–boron trifluoride complex, ST-3-BF₃, which has three units of 2-(pyridin-4-yl)-3-(thiophen-2-yl)acrylonitrile at the 3-, 5-, and 8-positions on the BODIPY skeleton, was designed and developed as an intramolecular charge transfer (ICT)-type optical sensor for the detection of a trace amount of water in acetonitrile. The characterization of ST-3-BF₃ was successfully determined by FTIR, ¹H and ¹¹B NMR measurements, high-resolution mass spectrometry (HRMS) analysis, thermogravimetry-differential thermal analysis (TG-DTA), photoabsorption and fluorescence spectral measurements, and density functional theory (DFT) calculations. ST-3-BF₃ showed a broad photoabsorption band in the range of 600 to 800 nm, which is assigned to the S₀ → S₁ transition of the BODIPY skeleton with the expanded π-conjugated system over the 2-(pyridin-4-yl)-3-(thiophen-2-yl)acrylonitrile units at the 3-, 5-, and 8-positions onto the BODIPY core. In addition, a photoabsorption band was also observed in the range of 300 to 550 nm, which can be assigned to the ICT band between the 2-(pyridin-4-yl)-3-(thiophen-2-yl)acrylonitrile units at 3-, 5-, and 8-positions and the BODIPY core. ST-3-BF₃ exhibited a characteristic fluorescence band originating from the BODIPY skeleton at around 730 nm. It was found that by addition of a trace amount of water to the acetonitrile solution of ST-3-BF₃, the photoabsorption band at around 415 nm and the fluorescence band at around 730 nm increased linearly as a function of the water content below only 0.2 wt%, which could be ascribed to the change in the ICT characteristics due to the dissociation of ST-3-BF₃ into ST-3 by water molecules. Thus, this work demonstrated that the 3,5,8-trithienyl-BODIPY-type pyridine–boron trifluoride complex can act as a highly-sensitive optical sensor for the detection of a trace amount of water in acetonitrile.

Propeller-structured 3,5,8-trithienyl-BODIPY-type pyridine–boron trifluoride complex, ST-3-BF₃, has been developed as an intramolecular charge transfer (ICT)-type optical sensor for the detection of a trace amount of water in acetonitrile.

The crystal structure of bis(isothiocyanato-κ1 N)-(methanol-κ1 O)-[2-morpholine-4-yl-4,6-di(pyrazol-1-yl)-1,3,5-triazine-κ3 N,N′,N′′] manganese(II), C16H18MnN10O2S2

C16H18MnN10O2S2, triclinic, P1̄ (no. 2), a = 7.8738(7) Å, b = 12.012(2) Å, c = 12.182(2) Å, α = 85.635(16)°, β = 81.077(14)°, γ = 74.540(14)°, V = 1096.3(3) Å3, Z = 2, R gt(F) = 0.0353, wR ref(F 2) = 0.0896, T = 96.5 K.

Metal-Organic Complexes@Melamine Foam Template Strategy to Prepare Three-Dimensional Porous Carbon with Hollow Spheres Structures for Efficient Organic Vapor and Small Molecule Gas Adsorption

Three-dimensional (3D) porous carbon materials have received substantial attention owing to their unique structural features. However, the synthesis of 3D porous carbon, especially 3D porous carbon with hollow spheres structures at the connection points, still pose challenges. Herein, we first develop a metal-organic complexes@melamine foam (MOC@MF) template strategy, by using hot-pressing and carbonization method to synthesize 3D porous carbon with hollow spheres structures (denoted as NOPCs). The formation mechanism of NOPCs can be attributed to the difference in Laplace pressure and surface energy gradient between the carbonized MOC and carbonized MF. These rare 3D porous carbons exhibit high BET surface area (2453.8 m² g^-1), N contents (10.5%), and O contents (16.3%). Moreover, NOPCs show significant amounts of toluene and methanol at room temperature, reaching as high as 1360 and 1140 mg g^-1. The adsorption amounts of SO₂ and CO₂ for NOPCs are up to 93.1 and 445 mg g^-1. Theoretical calculation indicates surfaces of porous carbon with N and O coexistence could strongly enhance adsorption with high adsorption energy of -65.83 kJ mol g^-1.

Design and synthesis of methyl 2-{[4-phenyl-5-(pyridin-2-yl)-4H-1,2,4-triazol-3-yl]sulfanyl}acetate (phpy2NS) as a ligand for complexes of Group 12 elements: structural assessment and hydrogen-bonded supramolecular assembly analysis

The reaction of 2-cyanopyridine with N-phenylthiosemicarbazide afforded 2-[amino(pyridin-2-yl)methylidene]-N-phenylhydrazine-1-carbothioamide (Ham4ph) and crystals of 4-phenyl-5-(pyridin-2-yl)-2,4-dihydro-3H-1,2,4-triazole-3-thione (pyph3NS, 1, C₁₃H₁₀N₄S). Crystals of methyl 2-{[4-phenyl-5-(pyridin-2-yl)-4H-1,2,4-triazol-3-yl]sulfanyl}acetate (phpy2NS, 2, C₁₆H₁₄N₄O₂S), derived from 1, were obtained by the reaction of Ham4ph with chloroacetic acid, followed by the acid-catalyzed esterification of the carboxylic acid with methyl alcohol. Crystals of bis(methanol-κO)bis(methyl 2-{[4-phenyl-5-(pyridin-2-yl)-4H-1,2,4-triazol-3-yl-κ²N¹,N⁵]sulfanyl}acetato)zinc(II)/cadmium(II) hexabromidocadmate(II), [Zn_0.76Cd_0.24(C₁₆H₁₄N₄O₂S)₂(CH₃OH)₂][Cd₂Br₆] or [Zn_0.76Cd_0.24(phpy2NS)₂(MeOH)₂][Cd₂Br₆], 3, and dichlorido(methyl 2-{[4-phenyl-5-(pyridin-2-yl)-4H-1,2,4-triazol-3-yl-κ²N¹,N⁵]sulfanyl}acetato)mercury(II), [HgCl₂(C₁₆H₁₄N₄O₂S)] or [Hg(phpy2NS)Cl₂], 4, were synthesized using ligand 2 and CdBr₂ or HgCl₂, respectively. The molecular and supramolecular structures of the compounds were studied by X-ray diffractometry. The asymmetric unit of 3 is formed from CdBr₃ and M(phpy2NS)(MeOH) units, where the metal centre M has a 76% occupancy of Zn^II and 24% of Cd^II. The M²⁺ centre of the cation, located on a crystallographic inversion centre, is hexacoordinated and appears as a slightly distorted octahedral [MN₄O₂]²⁺ cation. The Cd centre of the anion is coordinated by two terminal bromide ligands and two bridging bromide ligands that generate [Cd₂Br₆]^2- cadmium-bromide clusters. These clusters display crystallographic inversion symmetry forming two edge-shared tetrahedra and serve as agents that direct the structure in the formation of supramolecular assemblies. In mononuclear complex 4, the coordination geometry around the Hg²⁺ ion is distorted tetrahedral and comprises two chloride ligands and two N-atom donors from the phpy2NS ligand, viz. one pyridine N atom and the other from triazole. In the crystal packing, all four compounds exhibit weak intermolecular interactions, which facilitate the formation of three-dimensional architectures. Along with the noncovalent interactions, the structural diversity in the complexes can be attributed to the metal centre and to the coordination geometry, as well as to its ionic or neutral character.

Micromesoporous Nitrogen-Doped Carbon Materials Derived from Direct Carbonization of Metal-Organic Complexes for Efficient CO2 Adsorption and Separation

Metal-organic complexes (MOCs) are considered as excellent precursors to prepare carbon materials, due to the fact that heteroatoms and functional groups can be naturally reserved in the resulting carbon materials through the carbonization. Herein, micromesoporous nitrogen-doped carbons MPNC-1 and MPNC-2 are successfully obtained by direct carbonization (800 °C, KOH activation) of metal-organic complexes DQA-1 and DQA-2. MPNC-1 and MPNC-2 exhibit high BET surface area (2368.9 and 2327.6 m² g^-1), pore volume (1.95 and 1.89 cm³ g^-1), and N contents (17.2% and 12.3%). At 25 °C and 1 bar, MPNC-1 and MPNC-2 show high CO₂ adsorption of 7.53 and 6.58 mmol g^-1, the estimated CO₂/N₂ selectivity are 20.5 and 22.6, indicating excellent promise for practical CO₂ adsorption and separation applications. Theoretical calculation indicates carbon surfaces with pyridinic-N, pyrrolic-N, and graphitic-N coexistence could strongly change the local electronic distribution and electrostatic surface potential, enhancing the CO₂ adsorption with adsorption energy of -58.96 kJ mol g^-1. Theoretical calculation also highlights that CO₂ adsorption mechanism is electrostatic interaction with a large green isosurface between CO₂ molecules and the carbon surface.

Colorimetric and ratiometric fluorescence sensing of water based on 9-methyl pyrido[3,4-b]indole-boron trifluoride complex

In this work, 9-methyl pyrido[3,4-b]indole-boron trifluoride complex, 9-MP-BF3, was designed and developed as a colorimetric and ratiometric fluorescent sensor for the detection of water in the low- and high-water-content regions in solvents. In the low-water-content region, a new photoabsorption band at around 360 nm and a fluorescence band at around 370 nm gradually appeared due to the dissociation of 9-MP-BF3 into 9-methyl pyrido[3,4-b]indole (9-MP) by water molecules with a simultaneous decrease in the photoabsorption band at around 390 nm and the fluorescence band at around 460 nm originating from 9-MP-BF3. In the moderate-water-content region, the photoabsorption band at around 360 nm and the fluorescence band at around 370 nm gradually shifted to a longer wavelength region with an increase in the fluorescence intensity, which could be ascribed to the formation of a hydrogen-bonded complex (9-MP-H2O) with water molecules. Furthermore, in the high-water-content region, two photoabsorption bands at around 305 nm and 390 nm and one fluorescence band at around 460 nm gradually reappeared with simultaneous decrease in the photoabsorption band at around 290 nm and the fluorescence band at around 370 nm, which was attributed to the formation of a hydrogen-bonded proton transfer complex (9-MP-H+) with water molecules. Thus, this work revealed the mechanism of a colorimetric and ratiometric fluorescent sensor based on pyrido[3,4-b]indole-boron trifluoride complex for the detection of water over a wide range from low water content to high water content in solvents.

Nitrogen-Doped Microporous Carbons Derived from Pyridine Ligand-Based Metal-Organic Complexes as High-Performance SO2 Adsorption Sorbents

Heteroatom-doped porous carbons are emerging as platforms for gas adsorption. Herein, N-doped microporous carbon (NPC) materials have been synthesized by carbonization of two pyridine ligand-based metal-organic complexes (MOCs) at high temperatures (800, 900, 1000, and 1100 °C). For NPCs (termed NPC-1- T and NPC-2- T, where T represents the carbonization temperature), the micropore is dominant, pyridinic-N and other N atoms of MOC precursors are mostly retained, and the N content reaches as high as 16.61%. They all show high Brunauer-Emmett-Teller surface area and pore volume, in particular, NPC-1-900 exhibits the highest surface areas and pore volumes, up to 1656.2 m² g^-1 and 1.29 cm³ g^-1, respectively, a high content of pyridinic-N (7.3%), and a considerable amount of SO₂ capture (118.1 mg g^-1). Theoretical calculation (int = ultrafine m062x) indicates that pyridinic-N acts as the leading active sites contributing to high SO₂ adsorption and that the higher content of pyridinic-N doping into the graphite carbon layer structure could change the electrostatic surface potential, as well as the local electronic density, which enhanced SO₂ absorption on carbon edge positions. The results show great potential for the preparation of microporous carbon materials from pyridine ligand-based MOCs for effective SO₂ adsorption.

Hot-Pressing Method To Prepare Imidazole-Based Zn(II) Metal-Organic Complexes Coatings for Highly Efficient Air Filtration

Particulate matters (PMs) air pollution has become a serious environmental issue due to its great threat to human health. Herein, metal-organic complexes PBM-Zn1 and PBM-Zn2 coatings (noted as PBM-Zn-Filter) have been produced by the hot-pressing method on various substrates for the first time. Layer-by-layer PBM-Zn-Filters were also obtained through varying hot-pressing cycles. The obtained PBM-Zn-Filters with high robustness show excellent performance in PMs removal. In particular, benefiting from thelarger conjugation system, micropore structure, lower pressure drop, higher electrostatic potential ζ, and electron cloud exposed metal center of PBM-Zn2 (DFT calculations), PBM-Zn2@melamine foam-4 gives the highest removal rates, PM2.5:99.5% ± 1.2% and PM10:99.3% ± 1.1%, and the removal efficiency for capture PM2.5 and PM10 particles in cigarette smoke were both retained at high levels (>95.5%) after 24 h tests. More importantly, a homemade mask is made up by imbedding the PBM-Zn2@melamine foam-4 into a commercial breathing mask, which shows higher removal efficiency, lower pressure drop, smaller thickness, and higher quality factor than two commercial breathing masks, the PMs removal efficiencies for both PM2.5 and PM10 are 99.6% ± 0.5% and 99.4% ± 0.8%, and acceptable air resistance are demonstrated.

Tetraphenylethene– and diphenyldibenzofulvene–anthracene-based fluorescence sensors possessing photo-induced electron transfer and aggregation-induced emission enhancement characteristics for detection of water

RS-1 and RS-2 have been developed as PET/AIEE hybrid fluorescence sensors for detection of water in the low and high water content regions in solvents.

Novel Hydrogen-Bonding Cross-Linking Aggregation-Induced Emission: Water as a Fluorescent "Ribbon" Detected in a Wide Range

The development of efficient sensors for detection of the water content in a wide detection range is highly desirable for balance in many industrial processes and products. Presented herein are six novel different substituted Schiff base Zn(II) complexes, which exhibit the remarkable capability to detect traces of water in a wide linear range (most can reach 0-94%, v/v), low detection limit of 0.2% (v/v), and rapid response time of 8 s in various organic solvents by virtue of an unusual water-activated hydrogen-bonding cross-linking AIE (WHCAIE) mechanism. As a proof-of-concept, the WHCAIE mechanism is explained well by single X-ray diffraction, absorption spectra, fluorescence spectra, dynamic light scattering, ¹H NMR spectra, and theoretical calculations. In addition, the molecules demonstrated their application for the detection of humidity (42-80%). These Schiff base Zn(II) complexes become one of the most powerful water sensors known due to their extraordinary sensitivity, fast response, and wide detection range for water.