Simple and high yield access to octafunctional azido, amine and urea group bearing cubic spherosilicates

Bispropylurea bridged polysilsesquioxane: A microporous MOF-like material for molecular recognition

Microporous organosilicas assembled from polysilsesquioxane (POSS) building blocks are promising materials that are yet to be explored in-depth. Here, we investigate the processing and molecular structure of bispropylurea bridged POSS (POSS-urea), synthesised through the acidic condensation of 1,3-bis(3-(triethoxysilyl)propyl)urea (BTPU). Experimentally, we show that POSS-urea has excellent functionality for molecular recognition toward acetonitrile with an adsorption level of 74 mmol/g, which compares favourably to MOFs and zeolites, with applications in volatile organic compounds (VOC). The acetonitrile adsorption capacity was 132-fold higher relative to adsorption capacity for toluene, which shows the pores are highly selective towards acetonitrile adsorption due to their size and arrangement. Theoretically, our tight-binding density functional and molecular dynamics calculations demonstrated that this BTPU based POSS is microporous with an irregular placement of the pores. Structural studies confirm maximal pore sizes of ∼1 nm, with POSS cages possessing an approximate edge length of ∼3.16 Å.

Synthesis of Silsesquioxanes with Substituted Triazole Ring Functionalities and Their Coordination Ability

A synthesis of a series of mono-T8 and difunctionalized double-decker silsesquioxanes bearing substituted triazole ring(s) has been reported within this work. The catalytic protocol for their formation is based on the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) process. Diverse alkynes were in the scope of our interest-i.e., aryl, hetaryl, alkyl, silyl, or germyl-and the latter was shown to be the first example of terminal germane alkyne which is reactive in the applied process' conditions. From the pallet of 15 compounds, three of them with pyridine-triazole and thiophenyl-triazole moiety attached to T8 or DDSQ core were verified in terms of their coordinating properties towards selected transition metals, i.e., Pd(II), Pt(II), and Rh(I). The studies resulted in the formation of four SQs based coordination compounds that were obtained in high yields up to 93% and their thorough spectroscopic characterization is presented. To our knowledge, this is the first example of the DDSQ-based molecular complex possessing bidentate pyridine-triazole ligand binding two Pd(II) ions.

Adaptive molecular quaternary clips made with pyrene functionalized polyhedral oligomeric silsesquioxane

Evolving synthetic molecules toward complex structures is a major goal in supramolecular chemistry. Increasing the number of clips in a unimolecular multi-clip (UMC), although vital to elevate the complexity of supramolecular architectures, often prevents the UMC from forming host-guest complexes in the bulk phase. To overcome this difficulty, adaptive chemistry was applied to develop a novel adaptive unimolecular quaternary clip (Q-clip). The Q-clip is intrinsically amorphous, but self-organizes with exclusively 4 eq. of allosteric activators (NDI) to form the Q-clip : NDI₄ complexes and a supramolecular lamellar structure in the bulk. The adaptive assembly is fast and allows us to locate the adaptive assembly area of Q-clip : NDI₄ complexes in the amorphous Q-clip film. Our results provide new insights into the design of adaptive UMCs for the evolution toward complex structures and supramolecular functional materials.

Selective Hydrosilylation of Alkynes with Octaspherosilicate (HSiMe2 O)8 Si8 O12

Comprehensive studies on platinum-catalyzed hydrosilylation of a wide range of terminal and internal alkynes with spherosilicate (HSiMe2 O)8 Si8 O12 (1 a) were performed. The influence of the reaction parameters and the types of reagents and catalysts on the efficiency of the process, which enabled the creation of a versatile and selective method to synthesize olefin octafunctionalized octaspherosilicates, was studied in detail. Within this work, twenty novel 1,2-(E)-disubstituted and 1,1,2-(E)-trisubstituted alkenyl-octaspherosilicates (3 a-m, 6 n-t) were selectively obtained with high yields, and fully characterized (1 H, 13 C, 29 Si NMR, FTIR, MALDI TOF or TOF MS ES+ analysis). Moreover, the molecular structure of the compound (Me3 Si(H)C=C(H)SiMe2 O)8 Si8 O12 (3 a) was determined by X-ray crystallography for the first time. The developed procedures are the first that allow selective hydrosilylation of terminal silyl, germyl, aryl, and alkyl alkynes with 1 a, as well as the direct introduction of sixteen functional groups into the 1 a structure by the hydrosilylation of internal alkynes. This method constituted a powerful tool for the synthesis of hyperbranched compounds with a Si-O based cubic core. The resulting products, owing to their unique structure and physicochemical properties, are considered novel, multifunctional, hybrid, and nanometric building blocks, intended for the synthesis of star-shaped molecules or macromolecules, as well as nanofillers and polymer modifiers. In the presented syntheses, commercially available reagents and catalysts were used, so these methods can be easily repeated, rapidly scaled up, and widely applied.

Synthesis, characterization, and properties of novel UV-resistant poly(urethane-imide)/POSS nanocomposite

In this study, a series of hybrid nanocomposites composed of poly(urethane-imide) (PUI), fluoroethylene vinyl ether copolymers, and octa-aminophenyl polyhedral oligomeric silsesquioxane (POSS) were successfully prepared. Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), contact angle analysis, thermogravimetric analysis (TGA), and dynamic mechanical analysis were used to characterize the hybrid nanocomposites, which were found to have excellent thermostability, mechanical strength, and ultraviolet (UV) resistance. The SEM results showed that POSS nanoparticles, at low content level, could disperse homogeneously in the PUI matrix. The TGA results confirmed that the thermostability of the hybrid nanocomposites was significantly improved by the addition of POSS. Moreover, the UV-resistant property of the nanocomposites was evaluated based on the change in mechanical property and weight loss caused by the UV radiation. POSS (5 wt%) achieved the highest efficiency in enhancing the UV resistance of the nanocomposites. After UV radiation, the tensile modulus of the nanocomposite without POSS decreased to 187 MPa, and the mass loss was 7.26%. In contrast, the tensile modulus of the nanocomposite containing 5 wt% POSS increased from 412 MPa to 444 MPa, and the mass loss was only 3.76%.

Facile Synthesis and Self-Assembly of Amphiphilic Polyether-Octafunctionalized Polyhedral Oligomeric Silsesquioxane via Thiol-Ene Click Reaction

We demonstrated here a facile and efficient synthesis of polyhedral oligomeric silsesquioxane-based amphiphilic polymer by thiol-ene click chemistry. The properties of polyhedral oligomeric silsesquioxane (POSS)⁻PEG amphiphilic polymers were studied in detail by a combination of ¹H NMR, 13C NMR, 29Si NMR FT-IR, GPC, and TG analysis. The newly-designed thiol-ene protocol obtains only anti-Markovnikov addition POSS-based amphiphilic polymers when compared with platinum-catalysed hydrosilylation method. The critical micelle concentration (CMC) of the resulting polymers are in the range of 0.011 to 0.050 mg/mL, and dynamic light scattering (DLS) results revealed that the obtained amphiphilic polymers can self-assemble into nanoparticles in aqueous solutions with a bimodal (two peaks) distribution. Furthermore, the specific polymer showed obvious thermo-sensitive behaviour at 45.5 °C.