Chitosan-coated soybean protein isolate/lecithin nanoparticles for enhancing the stability and bioaccessibility of phytosterol

BACKGROUND

Phytosterols (PS) have various beneficial effects on human health, especially the property of reducing blood cholesterol. However, the low solubility and bioaccessibility of PS have greatly limited their application in functional food ingredients.

RESULTS

To improve the bioaccessibility and stability of PS, chitosan-coated PS nanoparticles (CS-PNP) were successfully prepared by self-assembly. The properties of CS-PNP, including size, zeta potential, encapsulation efficiency (EE) and loading amount (LA) were characterised. The optimisation of CS concentration (0.4 mg mL-1) and pH (3.5) resulted in the formation of CS-PNP with an EE of over 90% and a particle size of 187.7 nm. Due to the special properties of CS chitosan, the interaction between CS and soybean protein isolate (SPI)/lecithin (SL) led to the formation of a soluble complex. CS-PNP exhibited good stability to temperature variations but was more sensitive to salt ions. During in vitro digestion, CS efficiently maintained the stability of nanoparticles against the hydrolysis of SPI by pepsin under acidic conditions. However, these nanoparticles tended to aggregate in a neutral intestinal environment. After 3 h of in vitro digestion, the bioaccessibility of PS increased from 18.2% of free PS to 63.5% of CS-PNP.

CONCLUSION

Overall, these results highlight the potential of chitosan-coated nanoparticles as effective carriers for the oral administration of PS. This multilayer construction may serve as a promising for applications in food products as delivery vehicles for nutraceuticals. © 2024 Society of Chemical Industry.

Current and New Insights on Delivery Systems for Plant Sterols in Food

Plant sterols are minor bioactive components of food lipids, which are often used for the formulation of functional foods due to their cholesterol-lowering properties. However, they have low solubility and tend to crystallize, which may affect their biological effects, the sensory profile of the sterol-enriched food, and its consumer acceptability. Moreover, due to the unsaturated structure of sterols, they are susceptible to oxidation, so different encapsulation systems have been developed to improve their dispersibility/solubility, stability, delivery, and bioaccessibility. This chapter provides an overview of the main encapsulation systems currently used for plant sterols and their application in model and food systems, with a particular focus on their efficiency and impact on sterol bioaccessibility.

Soy proteins as vehicles for enhanced bioaccessibility and cholesterol-lowering activity of phytosterols

BACKGROUND

The formulation of phytosterol (PS)-enriched functional foods has attracted increasing interest in the recent years, owing to its potential health effects. However, the poor solubility and bioavailability greatly limit PS application in this regard. This study investigated whether soy protein isolate (SPI) could effectively perform as a nanocarrier for improving the water solubility, bioaccessibility, and cholesterol-lowering activity of PSs.

RESULTS

In this work, we fabricated SPI-PS nanocomplexes, which not only can enhance the stability and bioaccessibility of PS, but also improve the cholesterol-lowering ability of SPI. This improvement was mainly due to the formation of protein-active substance complexes, through hydrophobic interactions. The complexation with PSs resulted in formation of nanosized particles with greater sizes, lower ζ-potential, and higher surface hydrophobicity. The encapsulation efficiency, loading amount, and solubility of PS were closely related to the applied PS concentration in the mixed dispersions, and the maximal PS solubility in the aqueous phase reached about 1.63 mg mL^-1 at the highest PS concentration (2.0 mg mL^-1 ). The PS molecules in the nanocomplexes were mainly present in the amorphous form. The enhanced in vitro cholesterol-lowering activity of PS nanocomplexes relative to free PS seemed to be closely related to its higher bioaccessibility.

CONCLUSION

The findings are of relevance for the development of food-grade PS ingredients suitable for the formulations of PS-enriched functional foods. © 2022 Society of Chemical Industry.

Milk Protein-Based Nanohydrogels: Current Status and Applications

Milk proteins are excellent biomaterials for the modification and formulation of food structures as they have good nutritional value; are biodegradable and biocompatible; are regarded as safe for human consumption; possess valuable physical, chemical, and biological functionalities. Hydrogels are three-dimensional, cross-linked networks of polymers capable of absorbing large amounts of water and biological fluids without dissolving and have attained great attraction from researchers due to their small size and high efficiency. Gelation is the primary technique used to synthesize milk protein nanohydrogels, whereas the denaturation, aggregation, and gelation of proteins are of specific significance toward assembling novel nanostructures such as nanohydrogels with various possible applications. These are synthesized by either chemical cross-linking achieved through covalent bonds or physical cross-linking via noncovalent bonds. Milk-protein-based gelling systems can play a variety of functions such as in food nutrition and health, food engineering and processing, and food safety. Therefore, this review highlights the method to prepare milk protein nanohydrogel and its diverse applications in the food industry.

Water-In-Oil Pickering Emulsions Stabilized by Microcrystalline Phytosterols in Oil: Fabrication Mechanism and Application as a Salt Release System

Recently, Pickering emulsions stabilized by edible particles have attracted significant attention from the scientific community and food industry owing to their surfactant-free character. However, those edible particles are mostly used for stabilizing oil-in-water emulsions, whereas those for water-in-oil emulsions are very limited. In this article, stable water-in-oil Pickering emulsions were prepared through dispersing phytosterol particles in oil phase, and the effects of antisolvent treatment, the type of oil, particle concentration, and water fraction on the stability, type, and morphology of these emulsions were investigated. In addition, the release profile of salt as a model aqueous compound from these emulsions has also been studied. Results showed that due to its higher water content, the antisolvent pretreatment of phytosterol in the ethanol/water system facilitated the dispersion of dried phytosterol particles into oil phase as microcrystals. Water-in-oil Pickering emulsions with droplet sizes of 80-100 μm were fabricated at phytosterol concentrations of 1.5-3% w/v and water fractions of 0.2-0.6. The dissolved phytosterol molecules in oil phase could help in emulsion stabilization through interfacial crystallization during emulsification, evidenced by polar microscopic observations. Moreover, the salt release from phytosterol-stabilized Pickering emulsions showed a temperature-dependent profile which could have potential application in a controlled-release system. The current study provided important information for fabrication of stable water-in-oil emulsion using natural particles.

Production, Characterization, Delivery, and Cholesterol-Lowering Mechanism of Phytosterols: A Review

Phytosterols are natural plant-based bioactive compounds that can lower blood cholesterol levels and help prevent cardiovascular diseases. Consequently, they are being utilized in functional foods, supplements, and pharmaceutical products designed to improve human health. This paper summarizes different approaches to isolate, purify, and characterize phytosterols. It also discusses the hypolipidemic mechanisms of phytosterols and their impact on cholesterol transportation. Phytosterols have a low water-solubility, poor chemical stability, and limited bioavailability, which limits their utilization and efficacy in functional foods. Strategies are therefore being developed to overcome these shortcomings. Colloidal delivery systems, such as emulsions, oleogels, liposomes, and nanoparticles, have been shown to be effective at improving the water-dispersibility, stability, and bioavailability of phytosterols. These delivery systems can be used to incorporate phytosterols into a broader range of cholesterol-lowering functional foods and beverages. We also discuses several issues that need to be addressed before these phytosterol delivery systems can find widespread commercial utilization.

Preparation and characterization of soybean protein isolate-dextran conjugate-based nanogels

Soybean protein isolate (SPI)-dextran conjugate-based nanogels were prepared via the Maillard reaction combined with protein self-assembly in this study. The dextran molecular weight (40 kDa), SPI/dextran mass ratio (1:1.75), and incubation time (3.3 d) for preparing SPI-dextran conjugate (SDC) were firstly optimized. The SDC was confirmed by analyzing the changes in protein composition and infrared absorption bands and showed loosened tertiary conformation, reduced surface hydrophobicity, decreased Z-average hydrodynamic diameter (D_h) and zeta potential, and improved emulsifying properties compared to the native SPI. Effects of conjugate concentration, pH, heating temperature, and time on D_h and polydispersity index were also evaluated. The SDC-based nanogels were translucent in aqueous solution and exhibited a spherical core-shell structure with a D_h of ∼104.4 nm and a good stability against thermal treatment, ionic strength, and storage. Results demonstrated the SDC-based nanogels possessed a potential to be used as desirable nanocarriers for encapsulating hydrophobic bioactive compounds.

Sodium Dodecyl Sulfate-Dependent Disassembly and Reassembly of Soybean Lipophilic Protein Nanoparticles: An Environmentally Friendly Nanocarrier for Resveratrol

The development of protein-based nanocarriers to improve the water solubility, stability, and bioavailability of hydrophobic or poorly soluble bioactive molecules has attracted increasing interest in the food and pharmaceutical industries. In this study, a network-like nanostructure of soybean lipophilic protein (LP) was obtained through sodium dodecyl sulfate (SDS)-dependent decomposition and recombination. This nanostructure served as an excellent nanocarrier for resveratrol (Res), a poorly soluble biologically active molecule. The structure of LP gradually decomposed into its independent subunits at SDS concentrations ≤5% (w/v). After the removal of SDS, the dissociated subunits partially reassembled into a fibrous network-like nanostructure in which the Res molecules were encapsulated, and they preferentially interacted with the hydrophobic subunits (α and α' subunits and the 24 kDa subunit) of the protein. This system exhibited a high encapsulation efficiency (95.93%), high water solubility (85.29%), extraordinary oxidation resistance (DPPH radical scavenging activity of 67.1%), and improved Res digestibility (78.7%).

Water-Dispersible Phytosterol Nanoparticles: Preparation, Characterization, and in vitro Digestion

For improving solubility and bioaccessibility of phytosterols (PS), phytosterol nanoparticles (PNPs) were prepared by emulsification–evaporation combined high-pressure homogenization method. The organic phase was formed with the dissolved PS and soybean lecithin (SL) in anhydrous ethanol, then mixed with soy protein isolate (SPI) solution, and homogenized into nanoparticles, followed by the evaporation of ethanol. The optimum fabrication conditions were determined as PS (1%, w/v): SL of 1:4, SPI content of 0.75% (w/v), and ethanol volume of 16 ml. PNPs were characterized to have average particle size 93.35 nm, polydispersity index (PDI) 0.179, zeta potential −29.3 mV, and encapsulation efficiency (EE) 97.3%. The impact of temperature, pH, and ionic strength on the stability of fabricated PNPs was determined. After 3-h in vitro digestion, the bioaccessibility of PS in nanoparticles reached 70.8%, significantly higher than the 18.2% of raw PS. Upon freeze-drying, the particle size of PNPs increased to 199.1 nm, resulting in a bimodal distribution. The solubility of PS in water could reach up to 2.122 mg/ml, ~155 times higher than that of raw PS. Therefore, this study contributes to the development of functional PS-food ingredients.

Preparation and characterization of phytosterol-loaded nanoparticles with sodium caseinate/dextran conjugates

Sodium caseinate (SC)/dextran conjugates were prepared via Maillard reaction under controlled dry-heating conditions. Moreover, the nanoparticles of phytosterols (PS) encapsulated by SC or SC/dextran were produced using the emulsion evaporation method. The encapsulation efficiency (78.81 ± 5.22%) of PS in SC/dextran nanoparticles was higher than that (73.5 ± 2.78%) in SC nanoparticles. Compared with the compact and dense structure of SC nanoparticles, SC/dextran nanoparticles existed as relatively loose aggregates. The result of differential scanning calorimetry demonstrated that the encapsulation of PS greatly decreased its crystallinity. The released rates of PS from SC and SC/dextran nanoparticles under acidic gastric conditions were 8.59% and 4.73%, respectively. After 7 h of intestinal digestion, the released rate (52.19%) of PS from SC/dextran nanoparticles was significantly higher than that from SC (32.67%) nanoparticles. Therefore, SC/dextran conjugates prepared by the Maillard reaction are more suitable to be used as wall material for the nano-encapsulation of PS.

Preparation and characterization of soybean protein isolate/pectin-based phytosterol nanodispersions and their stability in simulated digestion

In this study, stigmasterol was nanoencapsulated in soy protein isolate -pectin-based nanodispersions. Based on the particle size and zeta-potential, the optimal pectin/SPI ratio of stigmasterol nanodispersion was determined to be 1:10. At this ratio, nanodispersions was manufactured with an average particle size of 477 ± 33 nm, an encapsulation efficiency of 89.37%, and a loading amount of 17.87%. The physical properties and morphology of the nanodispersion were investigated. Fourier transform infrared spectroscopy and differential scanning calorimetry analysis revealed that stigmasterol was loaded in nanodispersions successfully. The pectin, which was used to stable nanodispersion, could restrict the release of stigmasterol in the simulated gastric fluid. This experiment indicated that the presence of pectin can improve the stability of the nanodispersion and can be used to achieve controlled release of bioactive compounds.

A review on chemical and physical modifications of phytosterols and their influence on bioavailability and safety

Phytosterols have been shown to lower cholesterol levels and to have antioxidant, anti-inflammatory and other biological activities. However, the high melting point and poor solubility limit their bioavailability and practical application. It is advantageous to modify phytosterols chemically and physically. This article reviews and discusses the chemical and physical modifications of phytosterols, as well as their effects on the bioavailability and possible toxicity in vivo. The current research on chemical modifications is mainly focused on esterification to increase the oil solubility and water solubility. For physical modifications (mainly microencapsulation), there are biopolymer-based, surfactant-based and lipid-based nanocarriers. Both chemical and physical modifications of phytosterols can effectively increase the absorption and bioavailability. The safety of modified phytosterols is also an important issue. Phytosterol esters are generally considered to be safe. However, phytosterol oxides, which may be produced during the synthesis of phytosterol esters, have shown toxicity in animal models. The toxicity of nanocarriers also needs further studies.

Proteins from leguminous plants: from structure, property to the function in encapsulation/binding and delivery of bioactive compounds

Leguminous proteins are important nutritional components in leguminous plants, and they have different structures and functions depending on their sources. Due to their specific structures and physicochemical properties, leguminous proteins have received much attention in food and nutritional applications, and they can be applied as various carriers for binding/encapsulation and delivery of food bioactive compounds. In this review, we systematically summarize the different structures and functional properties of several leguminous proteins which can be classified as ferritin, trypsin inhibitor, β-conglycinin, glycinin, and various leguminous proteins isolates. Moreover, we review the development of leguminous proteins as carriers of food bioactive compounds, and emphasize the functions of leguminous protein-based binding/encapsulation and delivery in overcoming the low bioavailability, instability and low absorption efficiency of food bioactive compounds. The limitations and challenges of the utilization of leguminous proteins as carriers of food bioactive compounds are also discussed. Possible approaches to resolve the limitations of applying leguminous proteins such as instability of proteins and poor absorption of bioactive compounds are recommended.

Isolation and Characterization of Bioactive Proteoglycan-Lipid Nanoparticles from Freshwater Clam (Corbicula fluminea Muller) Soup

Nanoparticles can be prepared by several sophisticated processes but until now, it cannot be prepared by simple home cooking. Here, we report that two incidental food nanoparticles (iFNPs) consisting of proteoglycans and phytosterols were isolated from soup made from freshwater clam (Corbicula fluminea Muller), a renowned folk remedy for liver problems in China and other parts of East Asia. These two bioactive iFNPs were obtained and characterized by anionic exchange chromatography coupled with multi-angle laser light scattering measurement. Their hydrodynamic diameters and ζ-potentials were 50 ± 0.2 nm and -28.0 mV and 67 ± 0.4 nm and -9.96 mV, respectively. FT-IR revealed that the proteoglycans in the particles contained α-type heteropolysaccharides. Both iFNPs were resistant to pH changes and separation by mechanical force but responsive to temperature changes. They effectively inhibited cholesterol uptake in vitro, which resonates with the traditional belief that freshwater clam soup provides hepatoprotective benefits. This study suggests that these two proteoglycan-lipid iFNPs are the active moieties and offers a supramolecular structure-based approach to study the function of such complex matrices derived from food.

Fabrication and structural properties of water-dispersible phytosterol using hot melt extrusion

Hot-melt extrusion (HME) technology was employed to improve water dispersibility of phytosterol (P) using glycerol (G), lecithin (L), and gum arabic (A) as emulsifiers and stabilizers. The structural properties and water dispersibility of HME products were investigated. In contrast to physical mixtures, better water dispersibility and storage stability were observed for HME products, especially P:L:G:A extrudate. These improvements may be mainly associated with decreased crystallinity of phytosterol due to the occurrence of co-crystallization of phytosterol with glycerol during HME process, as confirmed by DSC and XRD data. In addition, HME-induced lecithin-arabic gum reaction products effectively stabilize phytosterol microparticle in aqueous dispersion by providing a steric hindrance. These results suggest that HME could be an effectively and potentially solvent-free technique to produce water-dispersible phytosterol on a large scale.

Water-in-Oil Pickering Emulsions Stabilized Solely by Water-Dispersible Phytosterol Particles

Water-in-oil (W/O) Pickering emulsions were successfully synthesized by water-dispersible phytosterol (PS) particles formed through simple antisolvent precipitation. The effects of the organic/aqueous ratio on the particle morphology, crystallinity, and contact angle were investigated. Sheet-like PS particles with reduced crystallinity were further used as W/O Pickering emulsion stabilizers. The properties of the formed W/O emulsions could be transformed by changing the oil type, water-phase fraction, or particle contents. Results showed that emulsions with 80% water fraction could be stabilized by 3% particles in the aqueous phase, where dodecane was used as the oil phase. W/O Pickering emulsions stabilized by PS particles showed temperature responsiveness. When dried, PS particles could be well dispersed either in the water or oil phase to stabilize W/O Pickering emulsions. Therefore, this kind of PS particles could not only enrich the family of food-grade Pickering stabilizers, especially the W/O type, but also provide a smart Pickering stabilizer to fabricate environmental-responsive emulsion products.

Nutraceutical nanodelivery; an insight into the bioaccessibility/bioavailability of different bioactive compounds loaded within nanocarriers

Nanofoods is a current concept that is based on the application of nanotechnologies in the preparation of safe foods, with superior nutritional and sensory characteristics, and capable of providing multiple health benefits. In line with the principles of this concept, food scientists have focused on developing new types of nano biosystems that can contribute to increasing the bioavailability of bioactive compounds used in food fortification. Numerous research teams have investigated the main factors limiting oral bioavailability including: bioaccessibility, absorption and transformation of bioactive compounds and bioactive-loaded nanocarriers. The physicochemical processes involved in the factors limiting oral bioavailability have been extensively studied, such asthe release, solubility and interaction of bioactive compounds and nanocarriers during food digestion, transport mechanisms of bioactive compounds and nanoparticles through intestinal epithelial cells as well as the chemical and biochemical transformations in phase I and phase II reactions. In this comprehensive review, the physicochemical processes involved in the bioaccessibility/bioavailability of different encapsulated bioactive compounds, that play an important role in human health, will be explained including polyphenols, phytosterols, carotenoids, vitamins and minerals. In particular, the mechanisms involved in the cellular uptake of bioactive-loaded nanocarriers including transcellular transport (diffusion, endocytosis, pinocytosis, transcytosis, phagocytosis), paracellular transport (through the "tight junctions" between epithelial cells), and the active transport of bioactive compounds under the action of membrane transporters are highlighted.

In Vitro Bioaccessibility of Low-Crystallinity Phytosterol Nanoparticles Generated Using Nanoporous Starch Bioaerogels

Phytosterols are natural health-promoting bioactive compounds; however, phytosterols have very limited bioavailability due to their crystalline lipophilic structure. With the aim of improving bioaccessibility, low-crystallinity phytosterol nanoparticles were generated by supercritical carbon dioxide (SC-CO₂ ) impregnation of phytosterols into nanoporous starch aerogels (NSAs). The in vitro bioaccessibility of the phytosterol nanoparticles (35%) was significantly higher than that of the crude phytosterols (3%) after sequential oral, gastric, and intestinal digestion. The percentages of starch hydrolysis were not different among the various NSA preparations and reached to 64% after sequential digestion. The zeta potential of the phytosterol nanoparticles was higher compared to that of crude phytosterols in the micellar phase; indicating higher stability. The findings of this study support the use of NSA to produce nanoparticles of reduced crystallinity to improve the bioaccessibility of the lipophilic bioactive compounds. PRACTICAL APPLICATIONS: This novel process can decrease the size and crystallinity of phytosterols and thus improve phytosterols' bioavailability. It is a blueprint to apply to other water insoluble food bioactives. This novel approach may (i) improve the health benefits of water-insoluble bioactives; (ii) enable food manufacturers to add water-insoluble bioactives into low- and high-fat foods to produce health-promoting foods; and (iii) enhance the cost-benefit ratio of water insoluble bioactives.