Combination of deep eutectic solvent and functionalized metal-organic frameworks as a green process for the production of 5-hydroxymethylfurfural and furfural from sugars

Biomass is an abundant and sustainable resource that can be converted into energy and chemicals. Therefore, the development of efficient methods for the conversion of biomass into platform intermediates is crucial. In this study, the one-pot conversion of sugars into 5-hydroxymethylfurfural (HMF) and furfural was achieved using the metal-organic framework combined with metal ions [MIL-101(Cr)] as a high-activity catalyst, and a deep eutectic solvent (choline chloride and lactic acid) as a green solvent. The optimal temperature, time, amount of catalyst used, and amount of deep eutectic solvent used were all determined. The highest HMF yield of 49.74% and furfural yield of 55.90% were obtained. The recyclability of the catalysts and deep eutectic solvent was also investigated. After three reaction runs, the HMF yield was still nearly 30.00%. Finally, the MIL-101(Cr) catalytic system was selected to study the kinetic mechanism underlying the conversion of glucose into HMF.

Current Status and Challenges for Metal-Organic-Framework-Assisted Conversion of Biomass into Value-Added Chemicals

Owing to the abundance of availability, low cost, and environmental-friendliness, biomass waste could serve as a prospective renewable source for value-added chemicals. Nevertheless, biomass conversion into chemicals is quite challenging due to the heterogeneous nature of biomass waste. Biomass-derived chemicals are appealing sustainable solutions that can reduce the dependency on existing petroleum-based production. Metal-organic frameworks (MOFs)-based catalysts and their composite materials have attracted considerable amounts of interest in biomass conversion applications recently because of their interesting physical and chemical characteristics. Due to their tunability, the catalytic activity and selectivity of MOF-based catalyst/composite materials can be tailored by functionalizing them with a variety of functional groups to enhance biomass conversion efficiency. This review focuses on the catalytic transformation of lignocellulosic biomass into value-added chemicals by employing MOF-based catalyst/composite materials. The main focus is given to the production of the platform chemicals HMF and Furfural from the corresponding (hemi)cellulosic biomass, due to their versatility as intermediates for the production of various biobased chemicals and fuels. The effects of different experimental parameters on the conversion of biomass by MOF-based catalysts are also included. Finally, current challenges and perspectives of biomass conversion into chemicals by MOF-based catalysts are highlighted.

High Conversion of Concentrated Sugars to 5-Hydroxymethylfurfural over a Metal-free Carbon Catalyst: Role of Glucose-Fructose Dimers

To reduce the production cost of chemicals from renewable resources, the feedstock loading must be high and the catalyst must be of low cost and efficient. In this study, at a very short reaction time of 10 min at 125 °C, concentrated sugar solutions (20 wt %, 101 wt % on solvent) were converted to 5-hydroxymethylfurfural (HMF) over a cotton gin trash (CGT)-derived sulfonated carbon catalyst in a 1-butyl-3-methyl-imidazolium chloride ([BMIM]Cl) and 2-methyltetrahydrofuran (MeTHF) biphasic system. We report, for the first time, that the presence of glucose either as a covalently bonded monomer in sucrose or in a mixture with fructose achieved yields of HMF up to 62 mol % compared to a value of only 39 mol % obtained with fructose on its own. In the concentrated reaction medium, glucose, fructose, and sucrose molecules produce difructose anhydrides, dimers/reversion products, and sucrose isomers. The glucose-fructose dimers formed in sucrose and glucose/fructose reaction systems play a critical role in the transformation of the sugars to a higher-than-expected HMF yield. Thus, a strategy of using cellulosic glucose, where it is partially converted to fructose content and the high sugar concentration sugar mixture is then converted to HMF, should be exploited for future biorefineries.

Catalytic Conversion of Carbohydrates into 5-Hydroxymethylfurfural by Phosphotungstic Acid Encapsulated in MIL-101 (Cr, Sn) Catalyst in Deep Eutectic Solvents

Herein, we report the synthesis of bimetal-organic frameworks (BMOFs) with both Brønsted and Lewis acidities, in which phosphotungstic acid (PTA) was encapsulated in BMOFs. It is efficient in converting starch to 5-hydroxymethyl-furfural (HMF) in deep eutectic solvents (DESs) such as choline chloride and formic acid. The highest yield of HMF (37.94%) was obtained using P_0.5/BMOFs_1.0 to catalyze starch in a mixed solvent system comprising DESs and ethyl acetate (EAC) (v/v; 2:3) at 180 °C and a reaction time of 10 min. Employing a DES as a cocatalyst and solvent reduced the use of organic solvents. The catalyst showed adequate reusability, and the HMF yield only decreased by 2.88% after six cycles of reuse compared with that of the initial catalyst. This study demonstrates the application potential of BMOFs in the conversion of biomass to useful molecules with commercial and/or research value.

Epoxidation of Fatty Acid Methyl Esters with Hydrogen Peroxide Catalyzed by Peroxopolyoxotungstate PW4 Encapsulated in the MIL-100(Cr) Framework

The MIL-100(Cr), PW12@MIL-100(Cr) and PW4@MIL-100(Cr) catalysts were prepared and characterized through XRD, FTIR, BET, SEM, EDS and Raman spectroscopy. A comparison of the catalytic properties of the synthesized materials in the epoxidation of FAMEs with hydrogen peroxide was made. The PW4@MIL-100(Cr) catalyst exhibited the highest catalytic activity and provided a high selectivity for the formation of epoxides. The effects of the reaction temperature, catalyst loading, reaction time and FAME:hydrogen peroxide molar ratio on the reaction performance were investigated, and the optimal process conditions were determined. An epoxide yield of 73% with a selectivity of 77% could be obtained using PW4@MIL-100(Cr) after 4 h at 40 °C. The catalytic stability test showed that PW4@MIL-100(Cr) could be easily separated and reused without any treatment for at least five consecutive cycles without a loss of activity or selectivity.

Reaction Kinetics of Levulinic Acid Synthesis from Glucose Using Bronsted Acid Catalyst

Glucose is one of the primary derivative products from lignocellulosic biomass, which is abundantly available. Glucose has excellent potential to be converted into valuable compounds such as ethanol, sorbitol, gluconic acid, and levulinic acid (LA). Levulinic acid is an exceptionally promising green platform chemical. It comprises two functional groups, ketone and carboxylate, acting as highly reactive electrophiles for a nucleophilic attack. Therefore, it has extensive applications, including fuel additives, raw materials for the pharmaceutical industry, and cosmetics. This study reports the reaction kinetics of LA synthesis from glucose catalyzed by hydrochloric acid (HCl), a Bronsted acid, that was carried out under a wide range of operating conditions; i.e. the temperature of 140–180 °C, catalyst concentration of 0.5–1.5 M, and initial glucose concentration of 0.1–0.5 M. The highest LA yield of 48.34 % was able to be obtained from an initial glucose concentration of 0.1 M and by using 1 M HCl at 180 °C. The experimental results show that the Bronsted acid-catalyzed reaction pathway consists of glucose decomposition to levoglucosan (LG), conversion of LG to 5-hydroxymethylfurfural (HMF), and rehydration of HMF to LA. The experimental data yields a good fitting by assuming a first-order reaction model. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Tuning Brønsted and Lewis acidity on phosphated titanium dioxides for efficient conversion of glucose to 5-hydroxymethylfurfural

5-Hydroxymethylfurfural (HMF) derived from cellulosic sugars has become increasingly important as a platform chemical for the biorefinery industry because of its versatility in the conversion to other chemicals. Although HMF can be produced in high yield from fructose dehydration, fructose is rather expensive because it requires multiple processing steps. On the other hand, HMF can be produced directly from highly abundant glucose, which could reduce time and cost. However, an effective and multifunctional catalyst is needed to selectively promote the glucose-to-HMF reaction. In this work, we report a bifunctional phosphated titanium dioxide as an efficient catalyst for such a reaction. The best catalyst exhibits excellent catalytic performance for the glucose conversion to HMF with 72% yield and 83% selectivity in the biphasic system. We achieve this by tuning the solvent system, controlling the amount of Brønsted and Lewis acid sites on the catalyst, and modification of the reaction setup. From the analysis of acid sites, we found that the addition of phosphate group (Brønsted acid site) onto the surface of TiO2 (Lewis acid site) significantly enhanced the HMF yield and selectivity when the optimum ratio of Brønsted and Lewis acid sites is reached. The high catalytic activity, good reusability, and simple preparation method of the catalyst show a promise for the potential use of this catalytic system on an industrial scale.

Heterogeneous Catalysts for the Conversion of Glucose into 5-Hydroxymethyl Furfural

Lignocellulosic biomass, a cheap and plentiful resource, could play a key role in the production of sustainable chemicals. The simple sugars contained in the renewable lignocellulosic biomass can be converted into commercially valuable products such as 5-hydroxymethyl furfural (HMF). A platform molecule, HMF can be transformed into numerous chemical products with potential applications in a wide variety of industries. Of the hexoses contained in the lignocellulosic biomass, the successful production of HMF from glucose has been a challenge. Various heterogeneous catalysts have been proposed over the last decade, ranging from zeolites to metal organic frameworks. The reaction conditions vary in the reports in the literature, which makes it difficult to compare catalysts reported in different studies. In addition, the slight variations in the synthesis of the same material in different laboratories may affect the activity results, because the selectivity towards desired products in this transformation strongly depends on the nature of the active sites. This poses another difficulty for the comparison of different reports. Furthermore, over the last decade the new catalytic systems proposed have increased profoundly. In this article, we summarize the heterogeneous catalysts: Metal Organic Frameworks (MOFs), zeolites and conventional supported catalysts, that have been reported in the recent literature and provide an overview of the observed catalytic activity, in order to provide a comparison.

Zn(II)/Cd(II)-Based Metal-Organic Frameworks as Bifunctional Materials for Dye Scavenging and Catalysis of Fructose/Glucose to 5-Hydroxymethylfurfural

Functional neutral metal-organic frameworks (MOFs) {[M(5OH-IP)(L)]}_n [M = Zn(II) for ADES-4; Cd(II) for ADES-5; 5OH-IP = 5-hydroxyisophthalate; L = (E)-N'-(pyridin-3-ylmethylene)nicotinohydrazide) have been synthesized by a diffusion/conventional reflux/mechanochemical method and characterized by various analytical techniques. Crystals were harvested by a diffusion method, and single-crystal X-ray diffraction (SXRD) analysis revealed that an adjacent [M₂(COO)₂]_n ladder chain generates isostructural two-dimensional network motifs by doubly pillaring via L. The bulk-phase purity of ADES-4 and ADES-5 synthesized by a versatile synthetic approach has been recognized by the decent match of powder X-ray diffraction patterns with the simulated one. Both ADES-4 and ADES-5 showed selective adsorption of cationic dyes methylene blue (MB), methyl violet (MV), and rhodamine B (RhB) over anionic dye methyl orange (MO) from water with good uptake and rapid adsorption. Utilization of ADES-4 as a chromatographic column filler for adsorptive removal of individual cationic dyes as well as a mixture of dyes has been demonstrated from the aqueous phase. Interestingly, ADES-4 is reusable with good stability, and it showed a dye desorption phenomenon in methanol. The probable mechanism of cationic dye removal based on insight from structural information and plausible supramolecular interactions has also been explored. Both MOFs also showed efficient catalytic transformation of fructose and glucose into the high-value chemical intermediate 5-hydroxymethylfurfural of industrial significance.

Incorporation of Al3+ Sites on Brønsted Acid Metal-Organic Frameworks for Glucose-to-Hydroxylmethylfurfural Transformation

5-hydroxylmethylfurfural (HMF) is a bio-based chemical that can be prepared from natural abundant glucose by using combined Brønsted-Lewis acid catalysts. In this work, Al³⁺ catalytic site has been grafted on Brønsted metal-organic frameworks (MOFs) to enhance Brønsted-Lewis acidity of MOF catalysts for a one-pot glucose-to-HMF transformation. The uniform porous structure of zirconium-based MOFs allows the optimization of both acid strength and density of acid sites in MOF-based catalysts by incorporating the desired amount of Al³⁺ catalytic sites at the organic linker. Al³⁺ sites generated via a post-synthetic modification act as Lewis acid sites located adjacent to the Brønsted sulfonated sites of MOF structure. The local structure of the Al³⁺ sites incorporated in MOFs has been elucidated by X-ray absorption near-edge structure (XANES) combined with density functional theory (DFT) calculations. The cooperative effect from Brønsted and Lewis acids located in close proximity and the high acid density is demonstrated as an important factor to achieve high yield of HMF.

Conversion of glucose to levulinic acid and upgradation to γ-valerolactone on Ru/TiO2 catalysts

Combining glucose dehydration and the subsequent hydrogenation in one pot without extra energy-intensive separation.

Hydrothermal Catalytic Conversion of Glucose into Lactic Acid with Acidic MIL-101(Fe)

MIL-101(Fe) was explored for the first time for the catalytic conversion of glucose into lactic acid (LA). The as-synthesized MIL-101(Fe) was successfully characterized, and its higher specific surface area, porosity, and feasible acid properties were confirmed to determine the remarkable catalytic activity in glucose-to-LA conversion (up to 25.4% yield) compared with other catalysts like MIL-101(Cr, Al) and UiO-66(Zr). The reaction parameters including temperature, reaction time, and substrate species as well as catalyst reusability were discussed.

An integrated effluent free process for the production of 5-hydroxymethyl furfural (HMF), levulinic acid (LA) and KNS-ML from aqueous seaweed extract

This paper demonstrates an integrated zero liquid discharge (ZLD) process for time-dependent recovery of 5-hydroxymethyl furfural (HMF), levulinic acid (LA) and potassium, nitrogen and sulphur rich mother liquor (KNS-ML) - manure from agar/agarose containing seaweed aqueous solution using transition metal-free KHSO₄ as an eco-friendly and reusable catalyst. The selectivity of HMF is higher at 115 °C in 3 h and favorable to LA in 6 h in autoclave conditions. The proposed concept could be fine-tuned for the selective production of 5-HMF (up to 91% yield) or levulinic acid (56% yield) in the presence of the KHSO₄ catalyst. We have also achieved recyclability of KHSO₄ up to nine (09) cycles and the gram-scale reaction has been demonstrated. The (KNS-ML) obtained after nine cycles followed by neutralization with ammonia solution utilized for manure makes the process zero-liquid discharge and more cost-effective. The efficacy of the KNS-ML after nine cycles has been tested on groundnut plants.

Functionalized Metal-Organic Framework Catalysts for Sustainable Biomass Valorization

Currently, pristine and functionalized metal-organic frameworks (MOFs) are introduced in heterogeneous catalysis for biomass upgrading owing to the specific texture properties including regular higher-order structure, high specific surface area, and the precisely tailored diversity. The purpose of this review is to afford a comprehensive discussion of the most applications in biomass refinery. We highlight recently developed four types of MOFs like pristine MOFs and their composites, MOF-supported metal NPs, acid-functionalized MOFs, and biofunctionalized MOFs for production of green, sustainable, and industrially acceptable biomass-derived platform molecules: (1) upgrading of saccharides, (2) upgrading of furan derivatives, and (3) upgrading of other biobased compounds.

Metal organic frameworks for biomass conversion

This review narrates the recent developments on the catalytic applications of pristine metal–organic frameworks (MOFs), functionalized MOFs, guests embedded over MOFs and MOFs derived carbon composites for biomass conversion into platform chemicals.

Engineering zirconium-based UiO-66 for effective chemical conversion of d-xylose to lactic acid in aqueous condition

Local defects and crystallinity of UiO-66 were systematically engineered, yielding an effective catalyst for lactic acid production from d-xylose via a hydrothermal reaction.

Sugar dehydration to 5-hydroxymethylfurfural in mixtures of water/[Bmim]Cl catalyzed by iron sulfate

Stabilization effect of [Bmim]Cl on HMF is demonstrated, which can suppress the rehydration and polymerization side-reactions and enhance HMF yield.

A TiO2/Nb2O5·nH2O heterojunction catalyst for conversion of glucose into 5-hydroxymethylfurfural in water

A series of water-tolerant Lewis acidic TiO₂/Nb₂O₅·nH₂O heterojunction catalysts with different Ti : Nb ratios have been prepared and investigated in the conversion of glucose into HMF in water.

A hydrothermally stable ytterbium metal-organic framework as a bifunctional solid-acid catalyst for glucose conversion

Yb6(BDC)7(OH)4(H2O)4 contains both bridging hydroxyls and metal-coordinated waters, possessing Brønsted and Lewis acid sites. The material crystallises from water at 200 °C. Using the solid as a heterogenous catalyst, glucose is converted into 5-hydroxymethylfurfural, via fructose, with a total selectivity of ∼70% after 24 hours at 140 °C in water alone: the material is recyclable with no loss of crystallinity.

Sn-Based Porous Coordination Polymer Synthesized with Two Ligands for Tandem Catalysis Producing 5-Hydroxymethylfurfural

5-Hydroxymethylfurfural (HMF) is a biomass-derived important platform compound. Developing an efficient catalyst for producing HMF from a biomass source is important. Herein, using the ligands 5-sulfoisophthalic acid (SPA) and imidazole (Imd), a tin-based porous coordination polymer was synthesized, namely SPA-Imd-TinPCP. This novel material possesses a multifunctional catalysis capability. The coordinated tin (IV) can catalyze the isomerization of glucose to fructose. The ligand imidazole, as an additional base site, can catalyze glucose isomerization. The sulfonic group of the ligand SPA can catalyze the dehydration of fructose to HMF. SPA-Imd-TinPCP was used as a catalyst for the conversion of glucose to HMF. HMF yields of 59.5% in dimethyl sulfoxide (DMSO) and 49.8% in the biphasic solvent of water/tetrahydrofuran were obtained. Consecutive use of SPA-Imd-TinPCP demonstrated that, after reusing it five times, there was no significant activity loss in terms of the glucose conversion and HMF yield.

Replacement of Chromium by Non-Toxic Metals in Lewis-Acid MOFs: Assessment of Stability as Glucose Conversion Catalysts

The metal–organic framework MIL-101(Cr) is known as a solid–acid catalyst for the solution conversion of biomass-derived glucose to 5-hydroxymethyl furfural (5-HMF). We study the substitution of Cr3+ by Fe3+ and Sc3+ in the MIL-101 structure in order to prepare more environmentally benign catalysts. MIL-101(Fe) can be prepared, and the inclusion of Sc is possible at low levels (10% of Fe replaced). On extended synthesis times the polymorphic MIL-88B structure instead forms.Increasing the amount of Sc also only yields MIL-88B, even at short crystallisation times. The MIL-88B structure is unstable under hydrothermal conditions, but in dimethylsulfoxide solvent, it provides 5-HMF from glucose as the major product. The optimum material is a bimetallic (Fe,Sc) form of MIL-88B, which provides ~70% conversion of glucose with 35% selectivity towards 5-HMF after 3 hours at 140 °C: this offers high conversion compared to other heterogeneous catalysts reported in the same solvent.

Catalytic conversion of glucose to 5-hydroxymethylfurfural using zirconium-containing metal-organic frameworks using microwave heating

5-Hydroxymethylfurfural (5-HMF) can be prepared by the catalytic dehydration of glucose or fructose using a range of homogeneous or heterogeneous catalysts. For our research, a selection of closely related Metal-Organic Frameworks (MOFs) were used as catalysts in the conversion of glucose to 5-HMF due to their chemical and thermal stability as well as the Lewis acidity of zirconium. Our initial study focused on the use of UiO-66-X (X = H, NH2 and SO3H), optimization of the dehydration reaction conditions, and correlation of the catalytic activity with the MOF's properties, in particular, their surface area. The highest yield of 5-HMF (28%) could be obtained using UiO-66 under optimal reaction conditions in dimethylsulfoxide and this could be increased to 37% in the presence of water. In catalyst recycling tests, we found the efficiency of UiO-66 was maintained across five runs (23%, 19%, 21%, 20%, 22.5%). The post-catalysis MOF, UiO-66-humin, was characterized using a range of techniques including PXRD, FT-IR, 13C Solid State NMR and N2 gas adsorption. We continued to optimize the reaction using MOF 808 as the catalyst. Notably, MOF 808 afforded higher yields of 5-HMF under the same conditions compared with the three UiO-66-X compounds. We propose that this might be attributed to the larger pores of MOF 808 or the more accessible zirconium centres.

Exceptionally Efficient and Recyclable Heterogeneous Metal-Organic Framework Catalyst for Glucose Isomerization in Water

Heterogeneous catalysts are desired for the conversion of glucose, the most abundant sugar in renewable biomass, but presently their synthesis requires highly toxic chemicals with long synthesis times. We report the conversion of glucose into fructose and 5-hydroxymethylfurfural on a heterogeneous catalyst that is stable and selective and operates in the most environmentally benign solvent, water. We used a bifunctional solid with Lewis and Brønsted acid sites by partially replacing the organic linker of the zirconium organic framework UiO-66 with 2-monosulfo-benzene-1,4-dicarboxylate. This catalyst showed high product selectivity (90 %) to 5-hydroxymethylfurfural and fructose at 140 °C in water after a reaction time of 3 h. It was recyclable and showed only a minor loss in activity after the third recycle, offering a realistic solution for the bottleneck glucose isomerization reaction for scale-up and industrial application of biomass utilization.

One-step fabrication of carbonaceous solid acid derived from lignosulfonate for the synthesis of biobased furan derivatives

An eco-friendly and low-cost lignosulfonate-based acidic carbonaceous catalyst (LS-SO₃H) was effectively fabricated using the sulfite pulping by-product of sodium lignosulfonate as a precursor by facile one-step simultaneous carbonization and sulfonation, and employed for the synthesis of promising biofuel furan derivatives from biorenewable feedstocks. The catalyst preparation conditions significantly affected the preparation and properties of LS-SO₃H. A relatively high catalyst preparation yield (40.4%) with strong –SO₃H density (1.33 mmol g⁻¹) were achieved when the lignosulfonate was treated in concentrated H₂SO₄ solution at 120 °C for 6 h. The preparation yield of LS-SO₃H was nearly twice as much as that of one-step prepared catalyst using alkaline lignin (another technical lignin from pulping) as a precursor. The as-prepared LS-SO₃H had similar textural characteristics to the frequently-used two-step prepared carbonaceous catalyst involving pyrolysis carbonization and sulfonation. LS-SO₃H was found to show good catalytic activity for the synthesis of 5-ethoxymethylfurfural (EMF) in ethanol medium, affording around 86%, 57% and 47% yields from 5-hydroxymethylfurfural (HMF), fructose and inulin, respectively. Also, a high HMF yield of 83% could be obtained from fructose when DMSO was replaced as reaction medium. The used LS-SO₃H was readily recovered by filtration, and remained active in recycle runs.

An easy-prepared and bio-supported lignosulfonate-based acidic carbonaceous catalyst was developed for the synthesis of promising furan biofuels from biorenewable feedstocks.

Efficient conversion of 5-hydroxymethylfurfural to high-value chemicals by chemo- and bio-catalysis

5-hydroxymethylfurfural (HMF) is a very important versatile platform compound derived from renewable biomass.

Functionalised heterogeneous catalysts for sustainable biomass valorisation

Functionalised heterogeneous catalysts show great potentials for efficient valorisation of renewable biomass to value-added chemicals and high-energy density fuels.

Nb-Based Zeolites: Efficient bi-Functional Catalysts for the One-Pot Synthesis of Succinic Acid from Glucose

The one-pot production of succinic acid from glucose was investigated in pure hot water as solvent using Nb (0.02 and 0.05 moles%)-Beta zeolites obtained by a post-synthesis methodology. Structurally, they are comprised of residual framework Al-acid sites, extra-framework isolated Nb (V) and Nb₂O₅ pore-encapsulated clusters. The Nb-modified Beta-zeolites acted as bi-functional catalysts in which glucose is dehydrated to levulinic acid (LA) which, further, suffers an oxidation process to succinic acid (SA). After the optimization of the reaction conditions, that is, at 180 °C, 18 bar O₂, and 12 h reaction time, the oxidation of glucose occurred with a selectivity to succinic acid as high as 84% for a total conversion.

Greening the Processes of Metal-Organic Framework Synthesis and their Use in Sustainable Catalysis

Given the shortage of sustainable resources and the increasingly serious environmental issues in recent decades, the demand for clean technologies and sustainable feedstocks is of great interest to researchers worldwide. With regard to the fields of energy saving and environmental remediation, the key point is the development of efficient catalysts, not only in terms of facile synthesis methods, but also the benign utilization of such catalysts. This work reviews the use of metal-organic frameworks (MOFs) and MOF-based materials in these fields. The definition of MOFs and MOF-based materials will be primarily introduced followed by a brief description of the characterization and stability of MOF-related materials under the applied conditions. The greening of MOF synthesis processes will then be discussed and catalogued by benign solvents and conditions and green precursors of MOFs. Furthermore, their suitable application in sustainable catalysis will be summarized, focusing on several typical atom-economic reactions, such as the direct introduction of H₂ or O₂ and C-C bond formation. Approaches towards reducing CO₂ emission by MOF-based catalysts will be described with special emphasis on CO₂ fixation and CO₂ reduction. In addition, driven by the explosive growth of energy consumption in the last century, much research has gone into biomass, which represents a renewable alternative to fossil fuels and a sustainable carbon feedstock for chemical production. The advanced progress of biomass-related transformations is also illustrated herein. Fundamental insights into the nature of MOF-based materials as constitutionally easily recoverable heterogeneous catalysts and as supports for various active sites is thoroughly discussed. Finally, challenges facing the development of this field and the outlook for future research are presented.

MIL-100(Fe)-catalyzed efficient conversion of hexoses to lactic acid

Lewis acidic metal–organic framework (MOF), MIL-100(Fe), was for the first time demonstrated to be efficient for the catalytic transformation of hexose sugars into lactic acid.