Self-healing gold mirrors and filters at liquid-liquid interfaces

Quantifying the interfacial tension of adsorbed droplets on electrified interfaces

HYPOTHESIS

This paper develops a new measurement method to answer the question: How does one measure the interfacial tension of adsorbed droplets?

EXPERIMENTS

This measurement is based on the placement of a bubble at a water|organic interface. To prove the concept, a bubble was formed by pipetting gas below the water|1,2-dichloroethane interface. Our values agree well with previous reports. We then extended the measurement modality to a more difficult system: quantifying interfacial tension of 1,2-dichloroethane droplets adsorbed onto conductors. Carbon dioxide was generated in the aqueous phase from the electro-oxidation of oxalate. Given carbon dioxide's solubility in 1,2-dichloroethane, it partitions, a bubble nucleates, and the bubble can be seen by microscopy when driving the simultaneous oxidation of tris(bipyridine)ruthenium (II), a molecule that will interact with CO2.-. and provide light through electrochemiluminescence. We can quantify the interfacial tension of adsorbed droplets, a measurement very difficult performed with more usual techniques, by tracking the growth of the bubble and quantifying the bubble size at the time the bubble breaks through the aqueous|1,2-dichloroethane interface.

FINDINGS

We found that the interfacial tension of nanoliter 1,2-dichloroethane droplets adsorbed to an electrified interface in water, which was previously immeasurable with current techniques, was one order of magnitude less than the bulk system.

Potential-Modulated Surface-Enhanced Raman Spectroscopy of Tolmetin at Gold Nanoparticle Film Functionalized Polarizable Liquid-Liquid Interfaces

An aqueous colloidal suspension of gold nanoparticles (AuNPs) may be condensed into a thin fractal film at the polarizable liquid-liquid interface formed between two immiscible electrolyte solutions upon injection of millimolar concentrations of sodium chloride to the aqueous phase. By adjusting the interfacial polarization conditions (negative, intermediate, and positive open-circuit potentials), the morphology of the film is modified, resulting in unique surface plasmon properties of the film, which enable in situ surface-enhanced Raman spectroscopy (SERS). Intense SERS signals are observed at the polarizable liquid-liquid interface when micromolar concentrations of tolmetin, a nonsteroidal anti-inflammatory drug, are entrapped in the AuNP fractal film. The change in the signal intensity, averaged over multiple spectra, with respect to the concentration of tolmetin, depends on the polarization conditions and suggests the presence of chemical-induced damping effects on the surface plasmons of the gold film.

Mixed Nanosphere Assemblies at a Liquid-Liquid Interface

The in-plane packing of gold (Au), polystyrene (PS), and silica (SiO2) spherical nanoparticle (NP) mixtures at a water-oil interface is investigated in situ by UV-vis reflection spectroscopy. All NPs are functionalized with carboxylic acid such that they strongly interact with amine-functionalized ligands dissolved in an immiscible oil phase at the fluid interface. This interaction markedly increases the binding energy of these nanoparticle surfactants (NPSs). The separation distance between the Au NPSs and Au surface coverage are measured by the maximum plasmonic wavelength (λmax) and integrated intensities as the assemblies saturate for different concentrations of non-plasmonic (PS/SiO2) NPs. As the PS/SiO2 content increases, the time to reach intimate Au NP contact also increases, resulting from their hindered mobility. λmax changes within the first few minutes of adsorption due to weak attractive inter-NP forces. Additionally, a sharper peak in the reflection spectrum at NP saturation reveals tighter Au NP packing for assemblies with intermediate non-plasmonic NP content. Grazing incidence small angle X-ray scattering (GISAXS) and scanning electron microscopy (SEM) measurements confirm a decrease in Au NP domain size for mixtures with larger non-plasmonic NP content. The results demonstrate a simple means to probe interfacial phase separation behavior using in situ spectroscopy as interfacial structures densify into jammed, phase-separated NP films.

Tunable Approach to Induce the Formation of Flexible Nanofilms from Small (3 nm) Gold Nanoparticles at Oil-Water Interfaces

The self-assembly of gold nanoparticles (AuNPs) into thin films at the liquid-liquid interface has promising applications in industries such as catalysis, optics, and sensors. However, precise control over their formation is complex, influenced by several factors which scale differently with core size. Due to their small free energy of adsorption, there are few examples of AuNPs with core diameters <10 nm. The present research evaluates the adsorption of ∼3 nm AuNPs from either side of the oil-aqueous interface with variations in ligand shell composition, the oil phase composition, and the structure of alcohol additives to best drive thin-film formation. Film formation and quality are evaluated, and a recent thermodynamic model is used to gain insight into the primary forces promoting this adsorption. Results demonstrate that longer-chain alcohol additives (namely, n-butanol and n-hexanol) induced adsorption more efficiently than shorter-chain alcohols (ethanol). The volume of alcohol additive needed to induce adsorption was dependent upon the ligand composition, suggesting that the mechanism for induced interfacial adsorption is via interaction with the AuNP ligand shell. Comparison with the thermodynamic model indicates that the driving force for this induced adsorption is the alteration of the three-phase contact angle. Additionally, the use of various oils demonstrates that as oil-water interfacial tension increases, more AuNPs adsorb to the interface. This relationship is also supported by the model. Insight gained for favorable conditions of adsorption for AuNPs < 10 nm as well as the underlying thermodynamic mechanism is important in working toward the ability to fine-tune such films for industrial applications.

Multi-analyte High-Throughput Microplate-SERS Reader with Controllable Liquid Interfacial Arrays

High-throughput surface-enhanced Raman scattering (SERS) reader, especially for liquid sample testing, is of great significance and huge demand in biology, environment, and other analytical fields. Inspired by the principle of microplate reader, herein, we developed a microplate-SERS reader for semiautomatic and high-throughput assays by virtue of three-dimensional liquid interfacial arrays (LIAs). For the first time, the formation of LIA in oil-in-water state, water-in-oil state, and two-dimensional plane state is realized by operating the hydrophilicity (contact angle) of the container. Through the force analysis of LIA, the effect of organic (O) phase density on the relative position of LIA was quantified. In addition, the optimized reader offers fast and continuous semiautomatic detection of 12 samples below 10 min with great signal reproducibility (calibration with the characteristic peak of O phase as the internal standard). The isolated wells in the microplate prevent analyte cross talk, allowing accurate quantification of each sample. Multiplex analysis capability highlights that this reader has the ability of rapid identification and quantification of samples containing various analytes and concentrations. The results demonstrate high-resolution dual and triple analyte detection with fully preserved signal and Raman features of individual analytes in a mixture, which implies that it also has excellent anticounterfeiting applications. This microplate-SERS reader combines the superior advantages of the LIA, microplate, and SERS techniques to retrieve the molecular vibrational fingerprints of various chemicals in complex media.

Stable SERS substrate based on highly reflective metal liquid-like films wrapped hydrogels for direct determination of small molecules in a high protein matrix

The study of the interaction between small molecules and proteins is important. Surface-enhanced Raman spectroscopy (SERS) is suitable for such applications since it has the power of detecting a molecule based on its intrinsic nature and without labeling. Herein, the MeLLFs@PAAG SERS substrate supporting highly reflective metal liquid-like films (MeLLFs) with polyacrylamide hydrogels (PAAG) has high-density "hot spots" to provide excellent SERS activity. The MeLLFs@PAAG formed by AgNPs only has less than 15% SERS activity loss when stored in the air for more than three weeks. By using rhodamine 6G (R6G) as a model analyte, the AgNPs based MeLLFs@PAAG SERS substrate exhibits an enhancement factor (EF) as high as 8.0 × 10⁶, a limit of detection (LOD) of 76.8 pM (S/N = 3). Also, the formed PAAG provided a 3D molecular network to orderly secure the assembled nanoparticles (NPs), which not only improves the stability of NPs but also shields the Raman signal of proteins as high as 45 g/L allowing the direct determination of the binding rate of human serum albumin (HSA) and doxorubicin (DOX). A binding rate of about 70% was detected, which is consistent with previous reports. Thus, proposed the MeLLFs@PAAG SERS substrate can be used as a promising candidate for SERS measurement in complex biological samples.

Exploiting Additives for Directing the Adsorption and Organization of Colloid Particles at Fluid Interfaces

The self-assembly of colloids at fluid interfaces is a well-studied research field both for gaining fundamental insights and for material fabrication. The fluid interface allows the confinement of particles in two dimensions and may act as a template for guiding their organization into soft and reconfigurable structures. Additives (e.g., surfactants, salts, and polymers) in the colloidal suspension are routinely used as a practical and effective tool to drive particle adsorption and tune their interfacial organization. However, some phenomena lying at the heart of the accumulation and self-assembly of particles at fluid interfaces remain poorly understood. This Feature Article aims to critically analyze the mechanisms involved in the adsorption and self-organization of micro- and nanoparticles at various fluid interfaces. In particular, we address the role of additives in both promoting the adsorption of particles from the bulk suspension to the fluid interface and in mediating the interactions between interfacial particles. We emphasize how different types of additives play a crucial role in controlling the interactions between suspended particles and the fluid interface as well as the interactions between adsorbed particles, thus dictating the final self-assembled structure. We also critically summarize the main experimental protocols developed for the complete adsorption of particles initially suspended in the bulk. Furthermore, we highlight some special properties (e.g., reconfigurability upon external stimulation and dissipative self-assembly) and the application potential of structures formed by colloid self-organization at fluid interfaces mediated/promoted by additives. We believe our contribution serves both as a practical roadmap to scientists coming from other fields and as a valuable information resource for all researchers interested in this exciting research field.

Pathway Complexity in Supramolecular Porphyrin Self-Assembly at an Immiscible Liquid-Liquid Interface

Nanostructures that are inaccessible through spontaneous thermodynamic processes may be formed by supramolecular self-assembly under kinetic control. In the past decade, the dynamics of pathway complexity in self-assembly have been elucidated through kinetic models based on aggregate growth by sequential monomer association and dissociation. Immiscible liquid–liquid interfaces are an attractive platform to develop well-ordered self-assembled nanostructures, unattainable in bulk solution, due to the templating interaction of the interface with adsorbed molecules. Here, we report time-resolved in situ UV–vis spectroscopic observations of the self-assembly of zinc(II) meso-tetrakis(4-carboxyphenyl)porphyrin (ZnTPPc) at an immiscible aqueous–organic interface. We show that the kinetically favored metastable J-type nanostructures form quickly, but then transform into stable thermodynamically favored H-type nanostructures. Numerical modeling revealed two parallel and competing cooperative pathways leading to the different porphyrin nanostructures. These insights demonstrate that pathway complexity is not unique to self-assembly processes in bulk solution and is equally valid for interfacial self-assembly. Subsequently, the interfacial electrostatic environment was tuned using a kosmotropic anion (citrate) in order to influence the pathway selection. At high concentrations, interfacial nanostructure formation was forced completely down the kinetically favored pathway, and only J-type nanostructures were obtained. Furthermore, we found by atomic force microscopy and scanning electron microscopy that the J- and H-type nanostructures obtained at low and high citric acid concentrations, respectively, are morphologically distinct, which illustrates the pathway-dependent material properties.

Self-assembly of colloidal nanoparticles into 2D arrays at water-oil interfaces: rational construction of stable SERS substrates with accessible enhancing surfaces and tailored plasmonic response

Self-assembly at water-oil interfaces has been shown to be a cheap, convenient and efficient route to obtain densely packed layers of plasmonic nanoparticles which have small interparticle distances. This creates highly plasmonically active materials that can be used to give strong SERS enhancement and whose structure means that they are well suited to creating the highly stable, reproducible and uniform substrates that are needed to allow routine and accurate quantitative SERS measurements. A variety of methods have been developed to induce nanoparticle self-assembly at water-oil interfaces, fine tune the surface chemistry and adjust the position of the nanoparticles at the interface but only some of these are compatible with eventual use in SERS, where it is important that target molecules can access the active surface unimpeded. Similarly, it is useful to transform liquid plasmonic arrays into easy-to-handle free-standing solid films but these can only be used as solid SERS substrates if the process leaves the surface nanoparticles exposed. Here, we review the progress made in these research areas and discuss how these developments may lead towards achieving rational construction of tailored SERS substrates for sensitive and quantitative SERS analysis.

Self-healing on mismatched fractured composite surfaces of SiC with a diameter of 180 nm

Self-healing on fractured surfaces of silicon carbide (SiC) is highly desirable, to avoid the catastrophic failure of high-performance devices working at extreme environments. Nevertheless, self-healing on a fractured surface of an amorphous and crystalline (AAC) composite structure of a brittle nanowire (NW) has not been demonstrated. In this study, self-healing is demonstrated on mismatched fractured surfaces of the AAC composite structure of a brittle solid for a SiC NW with a diameter of 187 nm. Fracture strength is 10.18 GPa for the AAC structure, recovering 11.7% after self-healing on its mismatched fractured surfaces. To the best of our knowledge, we firstly report the self-healing on mismatched fractured surfaces of the AAC structure for a brittle NW. This is a breakthrough of the previous prediction that self-healing could not be realized on a brittle NW with a diameter over 150 nm. A growth of 3 nm was found after self-healing on the gap induced by mismatched fractured surfaces, which is different from previous reports for pure amorphous and monocrystalline brittle NWs. To reduce the potential energy, coherent rebonding and debonding were performed to realize the atomic migration to fill the gap, resulting in the growth of gap of 3 nm to perform self-healing. Our findings shed light on the potential of self-healing for design and fabrication of next-generation high-performance SiC devices used in the vacuum and aerospace industries.

Self-assembling two-dimensional nanophotonic arrays for reflectivity-based sensing

We propose a nanoplasmonic platform that can be used for sensing trace levels of heavy metals in solutions via simple optical reflectivity measurements. The considered example is a lead sensor, which relies on the lead-mediated assembly of glutathione-functionalized gold nanoparticles (NPs) at a self-healing water/DCE liquid | liquid interface (LLI). Capillary forces tend to trap each NP at the LLI while the negatively charged ligands prevent the NPs settling too close to each other. In the presence of lead, due to chelation between the lead ion and glutathione ligand, the NPs assemble into a dense quasi-2D interfacial array. Such a dense assembly of plasmonic NPs can generate a remarkable broad-band reflectance signal, which is absent when NPs are adsorbed at the interface far apart from each other. The condensing effect of the LLI and the plasmonic coupling effect among the NP array gives rise to a dramatic enhancement of the reflectivity signals. Importantly, we show that our theory of the optical reflectivity from such an array of NPs works in perfect harmony with the physics and chemistry of the system with the key parameter being the interparticle distance at the interface. As a lead sensor, the system is fast, stable, and can achieve detection limits down to 14 ppb. Future alternative recognizing ligands can be used to build sister platforms for detecting other heavy metals.

We propose a nanoplasmonic platform that can be used for sensing trace levels of heavy metals in solutions via simple optical reflectivity measurements at the liquid–liquid interface.

Electrostatic pair-interaction of nearby metal or metal-coated colloids at fluid interfaces

In this paper, we theoretically study the electrostatic interaction between a pair of identical colloids with constant surface potentials sitting in close vicinity next to each other at the fluid interface. By employing a simplified yet reasonable model system, the problem is solved within the framework of classical density functional theory and linearized as well as nonlinear Poisson-Boltzmann (PB) theory. Apart from providing a sound theoretical framework generally applicable to any such problem, our novel findings, all of which contradict common beliefs, include the following: first, quantitative and qualitative differences between the interactions obtained within the linear and the nonlinear PB theories; second, the importance of the electrostatic interaction between the omnipresent three-phase contact lines in interfacial systems; and, third, the occurrence of an attractive electrostatic interaction between a pair of identical metal colloids. The unusual attraction we report largely stems from an attractive line interaction, which although scales linearly with the size of the particle can compete with the surface interactions and can be strong enough to alter the nature of the total electrostatic interaction. Our results should find applications in metal or metal-coated particle-stabilized emulsions where densely packed particle arrays are not only frequently observed but also sometimes required.

Direct Discrimination of Edible Oil Type, Oxidation, and Adulteration by Liquid Interfacial Surface-Enhanced Raman Spectroscopy

The quality and safety of edible oils is a momentous but formidable challenge, especially regarding identification of oil type, oxidation, and adulteration. Most conventional analytical methods have bottlenecks in sensitivity, specificity, accessibility, or reliability. Surface-enhanced Raman spectroscopy (SERS) is promising as an unlabeled and ultrasensitive technique but limited by modification of inducers or surfactants on metal surfaces for oil analysis. Here, we develop a quantitative SERS analyzer on two-liquid interfacial plasmonic arrays for direct quality classification of edible oils by a portable Raman device. The interfacial plasmonic array is self-assembled through mixing the gold nanoparticle (GNP) sols and oil sample dissolved in chloroform without any surfactants or pretreatments. Different kinds of edible oils dissolved in chloroform directly participate in self-assembly of plasmonic arrays that finally localizes onto a three-dimensional (3D) oil/water interface. The 3D plasmonic array is self-healing, shape adaptive, and can be transferred to any glass containers as a substrate-free SERS analyzer for direct Raman measurements. It produces sensitive responses of SERS on different kinds of edible oils. By virtue of principal component analysis (PCA), this analyzer is able to quickly distinguish six edible oils, oxidized oils, and adulterated oils. Moreover, the solvent chloroform generates unique and stable SERS bands that can utilized as an inherent internal standard (IIS) to calibrate SERS fluctuation and greatly improve quantitation accuracy. Compared to conventional lab methods, this analyzer avoids complex and time-consuming preprocessing and provides significant advantages in cost, speed, and utility. Our study illuminates a facile way to determine edible oil quality and promises great potential in food quality and safety analysis.

Locally pH controlled and directed growth of supramolecular gel microshapes using electrocatalytic nanoparticles

Micro-shapes of supramolecular hydrogels composed of oriented fibres were grown from locally deposited electrocatalytic Pt NPs after electrochemical pH modulation.

Facing Challenges in Real-Life Application of Surface-Enhanced Raman Scattering: Design and Nanofabrication of Surface-Enhanced Raman Scattering Substrates for Rapid Field Test of Food Contaminants

Surface-enhanced Raman scattering (SERS) is capable of detecting a single molecule with high specificity and has become a promising technique for rapid chemical analysis of agricultural products and foods. With a deeper understanding of the SERS effect and advances in nanofabrication technology, SERS is now on the edge of going out of the laboratory and becoming a sophisticated analytical tool to fulfill various real-world tasks. This review focuses on the challenges that SERS has met in this progress, such as how to obtain a reliable SERS signal, improve the sensitivity and specificity in a complex sample matrix, develop simple and user-friendly practical sensing approach, reduce the running cost, etc. This review highlights the new thoughts on design and nanofabrication of SERS-active substrates for solving these challenges and introduces the recent advances of SERS applications in this area. We hope that our discussion will encourage more researches to address these challenges and eventually help to bring SERS technology out of the laboratory.

Gold Raspberry-Like Colloidosomes Prepared at the Water-Nitromethane Interface

In this study, we propose a simple shake-flask method to produce micron-size colloidosomes from a liquid-liquid interface functionalized with a gold nanoparticle (AuNP) film. A step-by-step extraction process of an organic phase partially miscible with water led to the formation of raspberry-like structures covered and protected by a gold nanofilm. The distinctive feature of the prepared colloidosomes is a very thin shell consisting of small AuNPs of 12 or 38 nm in diameter instead of several hundred nanometers reported previously. The interesting and remarkable property of the proposed approach is their reversibility: the colloidosomes may be easily transformed back to a nanofilm state simply by adding pure organic solvent. The obtained colloidosomes have a broadband absorbance spectrum, which makes them of great interest in applications such as photothermal therapy, surface-enhanced Raman spectroscopy studies, and microreactor vesicles for interfacial electrocatalysis.

Electrotunable nanoplasmonic liquid mirror

Recently, there has been a drive to design and develop fully tunable metamaterials for applications ranging from new classes of sensors to superlenses among others. Although advances have been made, tuning and modulating the optical properties in real time remains a challenge. We report on the first realization of a reversible electrotunable liquid mirror based on voltage-controlled self-assembly/disassembly of 16 nm plasmonic nanoparticles at the interface between two immiscible electrolyte solutions. We show that optical properties such as reflectivity and spectral position of the absorption band can be varied in situ within ±0.5 V. This observed effect is in excellent agreement with theoretical calculations corresponding to the change in average interparticle spacing. This electrochemical fully tunable nanoplasmonic platform can be switched from a highly reflective 'mirror' to a transmissive 'window' and back again. This study opens a route towards realization of such platforms in future micro/nanoscale electrochemical cells, enabling the creation of tunable plasmonic metamaterials.

Bubble Assemblies of Nanocrystals: Superlattices without a Substrate

A method was developed to create free-standing nanocrystal films in the form of solidified bubbles. Bubbles of octadecanethiol-capped gold nanocrystals were studied by in situ grazing incidence small-angle X-ray scattering (GISAXS) to determine how the absence of an underlying substrate influences a disorder-order transition of a nanocrystal superlattice. We find that the presence of the substrate does not significantly change the nature of the disorder-order transition but does lead to reduced interparticle separation and reduced thermal expansion. Bubble assemblies of silicon and copper selenide nanocrystals are also demonstrated.

Highly Selective and Repeatable Surface-Enhanced Resonance Raman Scattering Detection for Epinephrine in Serum Based on Interface Self-Assembled 2D Nanoparticles Arrays

Target analyte detection in complex systems with high selectivity and repeatability is crucial to analytical technology and science. Here we present a two-dimensional (2D) surface-enhanced resonance Raman scattering (SERRS) platform, which takes advantages of the high selectivity of the SERRS sensor as well as the sensitivity and reproducibility of the interfacial SERS platform, for detecting trace epinephrine (EP) in the serum. To realize sensitive and selective detection of EP in a complex system, Au NPs are modified with α,β-nitriloacetic acid and Fe(NO₃)₃ to form the Au NP-(Fe-NTA) sensor, and as a consequence, EP can be rapidly captured by the sensor on the surface of Au NPs and then delivered at the cyclohexane/water interface. More importantly, we synthesized the extremely stable Au NPs (PVP-stabilized Au NPs), where the presence of PVP prevents aggregation of Au NPs during the self-assembly process and then makes a more uniform distribution of Au NPs with analytes at the cyclohexane/water interface, approximately 2 nm interparticle distance between the Au NPs, which has been proved by synchrotron radiation grazing incidence small-angle X-ray scattering (SR-GISAXS) experiments. The self-assembly method not only effectively avoids the aggregation of Au NPs and decreases the influence of the background signal but also can capture and enrich EP molecules in the cyclohexane/water interface, realizing the sensitive and selective detection of EP in complex serum sample. This strategy overcomes the difficulty of bringing nanostructures together to form efficient interparticle distance with simple fabrication and maximum uniformity and also provides a powerful nanosensor for tracing amounts of analyte molecules in a complex system with the advantages of capturing and enriching of target molecules in the liquid/liquid interface during the self-assembly process. Our SERRS platform opens vast possibilities for repeatability, sensitivity, and selectivity detection of targets in various complex fields.

Electrovariable gold nanoparticle films at liquid–liquid interfaces: from redox electrocatalysis to Marangoni-shutters

Control over the physical properties of nanoparticle assemblies at a liquid–liquid interface is a key technological advancement to realize the dream of smart electrovariable nanosystems. Electrified interfaces, such as the interface between two immiscible electrolytes solutions (ITIES), are almost an ideal platform for realizing this dream. Here, we show that the Galvani potential difference across soft interfaces can be effectively used to manipulate: (i) the reactivity of gold nanoparticle assemblies through varying the Fermi level (both chemically and electrochemically); (ii) the location distribution of the nanoparticles at the liquid–liquid interface. In the first case, in addition to our previous studies on electron transfer reactions (ET) across the ITIES, we used intensity modulated photocurrent spectroscopy (IMPS) to study the kinetics of photo-induced electrochemical reactions at the ITIES. As expected, the direct adsorption of gold nanoparticles at the interface modifies the kinetics of the ET reaction (so-called, interfacial redox electrocatalysis), however it did not lead to an increased photocurrent by “plasmonic enhancement”. Rather, we found that the product separation depends on double layer effects while the product recombination is controlled by the Galvani potential difference between the two phases. In the second case, we demonstrated that polarizing the ITIES caused migration of gold nanoparticles from the middle region of the cell to its periphery. We called such systems “Marangoni-type shutters”. This type of electrovariable plasmonic system did not experience diffusion limitation in terms of the adsorption/desorption of nanoparticles and the entire movement of nanoparticle assemblies happened almost instantly (within a second). It opens a fresh view on electrovariable plasmonics and presents new opportunities to create smart nanosystems at the ITIES driven with an electric field.

Self-assembly and redox induced phase transfer of gold nanoparticles at a water–propylene carbonate interface

Citrate-stabilized gold nanoparticles were found to spontaneously self-assemble into a lustrous film at a bare water–propylene carbonate interface after vigorous shaking, due to the extremely low interfacial tension. The presence of the electron donor, tetrathiafulvalene, in the oil phase, led to the extraction of particles into the organic phase.

Theory of tailorable optical response of two-dimensional arrays of plasmonic nanoparticles at dielectric interfaces

Two-dimensional arrays of plasmonic nanoparticles at interfaces are promising candidates for novel optical metamaterials. Such systems materialise from ‘top–down’ patterning or ‘bottom–up’ self-assembly of nanoparticles at liquid/liquid or liquid/solid interfaces. Here, we present a comprehensive analysis of an extended effective quasi-static four-layer-stack model for the description of plasmon-resonance-enhanced optical responses of such systems. We investigate in detail the effects of the size of nanoparticles, average interparticle separation, dielectric constants of the media constituting the interface, and the nanoparticle position relative to the interface. Interesting interplays of these different factors are explored first for normally incident light. For off-normal incidence, the strong effects of the polarisation of light are found at large incident angles, which allows to dynamically tune the reflectance spectra. All the predictions of the theory are tested against full-wave simulations, proving this simplistic model to be adequate within the quasi-static limit. The model takes seconds to calculate the system’s optical response and makes it easy to unravel the effect of each system parameter. This helps rapid rationalization of experimental data and understanding of the optical signals from these novel ‘metamaterials’, optimised for light reflection or harvesting.

Unravelling the optical responses of nanoplasmonic mirror-on-mirror metamaterials

Quasi-static effective medium theory for mirror-on-mirror platforms based on arrays of plasmonic nanoparticles coupled to a thin metallic film.