Atomically thin cesium lead bromide perovskite quantum wires with high luminescence

Perovskite Light-Emitting Diodes with Quantum Wires and Nanorods

Perovskite materials, celebrated for their exceptional optoelectronic properties, have seen extensive application in the field of light-emitting diodes (LEDs), where research is as abundant as the proverbial "carloads of books." In this review, the research of perovskite materials is delved into from a dimensional perspective, with a focus on the exemplary performance of low-dimensional perovskite materials in LEDs. This discussion predominantly revolves around perovskite quantum wires and perovskite nanorods. Perovskite quantum wires are versatile in their growth, compatible with both solution-based and vapor-phase growth, and can be deposited over large areas-even on spherical substrates-to achieve commendable electroluminescence (EL). Perovskite nanorods, on the other hand, boast a suite of superior characteristics, such as polarization properties and tunability of the transition dipole moment, endowing them with the great potential to enhance light extraction efficiency. Furthermore, zero-dimensional (0D) perovskite materials like nanocrystals (NCs) are also the subject of widespread research and application. This review reflects on and synthesizes the unique qualities of the aforementioned materials while exploring their vital roles in the development of high-efficiency perovskite LEDs (PeLEDs).

Enhance luminescence or change morphology: effect of the doping method on Cu2+-doped CsPbBr3 perovskite nanocrystals

The effect of Cu2+ on CsPbBr3 nanocrystals is compared between the hot-injection method and postsynthetic cation-exchange reaction.

Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals

Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.

Inhomogeneous Trap-State-Mediated Ultrafast Photocarrier Dynamics in CsPbBr3 Microplates

Quantitatively elucidating photocarrier dynamics mediated by trap states in perovskites is crucial for establishing a structure-performance relation and understanding the interfacial photocarrier transport mechanism. Here, trap-state-mediated photocarrier dynamics in defect-rich CsPbBr₃ microplates are noninvasively investigated by ultrafast laser spectroscopy. Time-resolved photoluminescense (TRPL) measurements as a function of sample thickness indicate that trap densities of surface and bulk regions are inhomogeneous, leading to fast and slow decay components of TRPL, respectively. Fast and slow PL lifetimes present the same decreasing trend as the thickness is decreased from 5 to 0.1 μm, suggesting that both surface and bulk trap densities dramatically increase in sub-micrometer thick microplates. Furthermore, dynamical competition of ultrafast photocarrier energy relaxations between surface and bulk regions is studied in a 1.6 μm-thick sample by temporally correlating pump fluence-dependent TRPL with transient absorption signals. Strikingly, long-lived hot carriers (20 ps) are observed and complete filling of mid-gap trap states in the surface region can markedly enhance PL emission in the bulk region. By control measurements, we attribute these anomalous phenomena to the polaron-assisted ultrafast energy transfer process across the surface-bulk interface. Our results provide new insights into dynamical photocarrier energy relaxations and interfacial energy transport for inorganic perovskites.

Anisotropic shape of CsPbBr3 colloidal nanocrystals: from 1D to 2D confinement effects

We synthesized strongly anisotropic CsPbBr₃ nanocrystals with very narrow emission and absorption lines associated to confinement effects along one or two dimensions, called respectively nanoplatelets (NPLs) and nanosticks (NSTs). Transmission Electron Microscopy (TEM) images, absorption and photoluminescence (PL) spectra taken at low temperature are very precise tools to determine which kind of confinement has to be considered and to deduce the shape, the size and the thickness of nanocrystals under focus. We show that the energy of the band-edge absorption and PL peaks versus the inverse of the square of the NPL thickness has a linear behaviour from 11 monolayers (MLs) i.e. a thickness of 6.38 nm, until 4 MLs (2.32 nm) showing that self-energy correction compensates the increase of the exciton binding energy in thin NPLs as already observed in Cadmium chalcogenides-based NPLs. We also show that slight changes in the morphology of NSTs leads to a very drastic modification of their absorption spectra. Time-resolved PL of NSTs has a non-monotonous behaviour with temperature. At 5 K, a quasi-single exponential with a lifetime of 80 ps is obtained; at intermediate temperature, the decay is bi-exponential and at 150 K, a quasi-single exponential decay is recovered (≈0.4 ns). For NSTs, the exciton interaction with LO phonons governs the broadening of the absorption and PL peaks at room temperature and is stronger than in chalcogenides quantum dots and NPLs.

Effective Surface Ligand-Concentration Tuning of Deep-Blue Luminescent FAPbBr3 Nanoplatelets with Enhanced Stability and Charge Transport

Metal-halide perovskite-based green and red light-emitting diodes (LEDs) have witnessed a rapid development because of their facile synthesis and processability; however, the blue-band emission is constrained by their unstable chemical properties and poorly conducting emitting layers. Here, we show a trioctylphosphine oxide (TOPO)-mediated one-step approach to realize bright deep-blue luminescent FAPbBr₃ nanoplatelets (NPLs) with enhanced stability and charge transport. The concentration of NPL surface ligands is shown to be progressively tuned via varying the amount of intermediate TOPO due to the acid-base equilibrium between protic acid and TOPO. By effectively optimizing the concentration of surface ligands, the structural integrity of NPL solids can be preserved in ambient air for a week, mainly because of the highly ordered and dense solid assembly and the reduced defects. The removal of excess organic ligands also enables the improvement of charge mobility by orders of magnitude. Ultimately, ultrapure deep-blue perovskite LEDs (439 nm) with a narrow emission width of 14 nm and a peak EQE of 0.14% are achieved at low driving voltage. Our finding expands the current understanding of surface ligand modulation in the development of pure bromide deep-blue perovskite optoelectronics.

Improving the Quality and Luminescence Performance of All-Inorganic Perovskite Nanomaterials for Light-Emitting Devices by Surface Engineering

Lead halide perovskites and their applications in the optoelectronic field have garnered intensive interest over the years. Inorganic perovskites (IHP), though a novel class of material, are considered as one of the most promising optoelectronic materials. These materials are widely used in detectors, solar cells, and other devices, owing to their excellent charge-transport properties, high defect tolerance, composition- and size-dependent luminescence, narrow emission, and high photoluminescence quantum yield. In recent years, numerous encouraging achievements have been realized, especially in the research of CsPbX₃ (X = Cl, Br, I) nanocrystals (NCs) and surface engineering. Therefore, it is necessary to summarize the principles and effects of these surface engineering optimization methods. It is also important to scientifically guide the applications and promote the development of perovskites more efficiently. Herein, the principles of surface ligands are reviewed, and various surface treatment methods used in CsPbX₃ NCs as well as quantum-dot light-emitting diodes are presented. Finally, a brief outlook on CsPbX₃ NC surface engineering is offered, illustrating the present challenges and the direction in which future investigations are intended to obtain high-quality CsPbX₃ NCs that can be utilized in more applications.

Hollow metal halide perovskite nanocrystals with efficient blue emissions

Metal halide perovskite nanocrystals (NCs) have emerged as new-generation light-emitting materials with narrow emissions and high photoluminescence quantum efficiencies (PLQEs). Various types of perovskite NCs, e.g., platelets, wires, and cubes, have been discovered to exhibit tunable emissions across the whole visible spectrum. Despite remarkable advances in the field of perovskite NCs, many nanostructures in inorganic NCs have not yet been realized in metal halide perovskites, and producing highly efficient blue-emitting perovskite NCs remains challenging and of great interest. Here, we report the discovery of highly efficient blue-emitting cesium lead bromide (CsPbBr₃) perovskite hollow NCs. By facile solution processing of CsPbBr₃ precursor solution containing ethylenediammonium bromide and sodium bromide, in situ formation of hollow CsPbBr₃ NCs with controlled particle and pore sizes is realized. Synthetic control of hollow nanostructures with quantum confinement effect results in color tuning of CsPbBr₃ NCs from green to blue, with high PLQEs of up to 81%.

α-CsPbI3 Nanocrystals by Ultraviolet Light-Driven Oriented Attachment

Size and crystallinity of building units in the perovskite layer are of great significance to photovoltaic performance. Thus, to fabricate large-grain-size perovskite materials with the advantage of good crystallinity is quite necessary. The oriented attachment strategy has been proofed as an efficient method to control crystal growth. Herein, we reported on oriented attachment of α-CsPbI₃ quantum dots (QDs) into a large-grain-size nanocrystal under moderate ultraviolet (UV) light. By virtue of atomic-resolution TEM and X-ray absorption fine structure (XAFS) spectroscopy, we observed the UV-directed structure-evolution and growth process. This is trigged by UV-light illumination (7 W, 365 nm), which drives the oriented assembly of QDs into a large nanoparticle along {110} facets. Moreover, we also visualized a damage process of the α-CsPbI₃ QDs to photoinactive-δ-phase ones and finally into PbI₂ under high-power UV-light (100 W, 365 nm) exposure. The findings provide a prototype for fabricating large-size perovskite nanostructures with promising properties.

G. S, Suvina V, Sakar M, Balakrishna RG. Perovskite nanomaterials as optical and electrochemical sensors

The perovskite family is comprised of a great number of members because of the possible and flexible substitution of numerous ions in its system.

Doping and ion substitution in colloidal metal halide perovskite nanocrystals

The past decade has witnessed tremendous advances in synthesis of metal halide perovskites and their use for a rich variety of optoelectronics applications. Metal halide perovskite has the general formula ABX3, where A is a monovalent cation (which can be either organic (e.g., CH3NH3+ (MA), CH(NH2)2+ (FA)) or inorganic (e.g., Cs+)), B is a divalent metal cation (usually Pb2+), and X is a halogen anion (Cl-, Br-, I-). Particularly, the photoluminescence (PL) properties of metal halide perovskites have garnered much attention due to the recent rapid development of perovskite nanocrystals. The introduction of capping ligands enables the synthesis of colloidal perovskite nanocrystals which offer new insight into dimension-dependent physical properties compared to their bulk counterparts. It is notable that doping and ion substitution represent effective strategies for tailoring the optoelectronic properties (e.g., absorption band gap, PL emission, and quantum yield (QY)) and stabilities of perovskite nanocrystals. The doping and ion substitution processes can be performed during or after the synthesis of colloidal nanocrystals by incorporating new A', B', or X' site ions into the A, B, or X sites of ABX3 perovskites. Interestingly, both isovalent and heterovalent doping and ion substitution can be conducted on colloidal perovskite nanocrystals. In this review, the general background of perovskite nanocrystals synthesis is first introduced. The effects of A-site, B-site, and X-site ionic doping and substitution on the optoelectronic properties and stabilities of colloidal metal halide perovskite nanocrystals are then detailed. Finally, possible applications and future research directions of doped and ion-substituted colloidal perovskite nanocrystals are also discussed.

Rapid synthesis of quantum-confined CsPbBr3 perovskite nanowires using a microfluidic reactor

Microfluidics has been considered as an effective platform in the mechanism study and large-scale manufacturing of nanomaterials. In this work, we report the facile synthesis of quantum-confined CsPbBr₃ nanowires (NWs) by using a continuous-flow microfluidic reactor. The optimized reaction temperature is around 50 °C, and one "synthesis run" by microfluidics requires only ten minutes. This study reveals that the formation of CsPbBr₃ NWs takes place by a hybrid growth mechanism of seed-mediated growth and oriented attachment growth. This microfluidic approach benefits the alignment of the short quantum-confined NWs and promotes their oriented attachment to form long NWs, while conventional flask synthesis results in large and irregular nanorods under the same reaction conditions. This work not only provides a new synthetic path for the preparation of CsPbX₃ NWs but also sheds some light on the fundamental study of CsPbX₃ NWs.

Lattice Disorder-Engineered Energy Splitting between Bright and Dark Excitons in CsPbBr3 Quantum Wires

Excitons in nanostructured semiconductors often undergo strong electron-hole exchange interaction, resulting in bright-dark exciton splitting with the dark exciton usually being the lower energy state. This unfavorable state arrangement has become the major bottleneck for achieving high photoluminescence quantum yield (PLQY). However, the arrangement of dark and bright exciton states in lead halide perovskites is under intense debate due to the involvement of many complicated factors. We present here the first experimental evidence to demonstrate that the strain is a crucial factor in tuning the energy splitting of the bright and dark excitons, resulting in different PL properties.

Metal Halide Perovskite Nanocrystals: Synthesis, Post-Synthesis Modifications, and Their Optical Properties

Metal halide perovskites represent a flourishing area of research, which is driven by both their potential application in photovoltaics and optoelectronics and by the fundamental science behind their unique optoelectronic properties. The emergence of new colloidal methods for the synthesis of halide perovskite nanocrystals, as well as the interesting characteristics of this new type of material, has attracted the attention of many researchers. This review aims to provide an up-to-date survey of this fast-moving field and will mainly focus on the different colloidal synthesis approaches that have been developed. We will examine the chemistry and the capability of different colloidal synthetic routes with regard to controlling the shape, size, and optical properties of the resulting nanocrystals. We will also provide an up-to-date overview of their postsynthesis transformations, and summarize the various solution processes that are aimed at fabricating halide perovskite-based nanocomposites. Furthermore, we will review the fundamental optical properties of halide perovskite nanocrystals by focusing on their linear optical properties, on the effects of quantum confinement, and on the current knowledge of their exciton binding energies. We will also discuss the emergence of nonlinear phenomena such as multiphoton absorption, biexcitons, and carrier multiplication. Finally, we will discuss open questions and possible future directions.

Consecutive Interfacial Transformation of Cesium Lead Halide Nanocubes to Ultrathin Nanowires with Improved Stability

Although all-inorganic CsPbX₃ (X = Cl, Br, I) nanocrystals (NCs) have been considered as a promising material for photoelectronic devices, their applications are still limited because of their poor stability and the lack of in-depth understanding. Here, we demonstrate a post-treatment method for the preparation of ultrathin CsPbX₃ nanowires (NWs) by treating CsPbBr₃ nanocubes with thiourea solution. A systematic study showed a consecutive interfacial transformation process, in which CsPbBr₃ nanocubes were first converted to Cs₄PbBr₆ NCs in the presence of thiourea, followed by a further transformation to CsPbBr₃ NCs through an interfacial CsX-stripping process. To reduce the surface energy, an oriented attachment process has been realized and CsPbBr₃ NCs aggregated to form ultrathin NWs. The ultrathin CsPbBr₃ NWs exhibited high photoluminescence quantum yield (up to 60%) and high resistance to water treatment, which can be attributed to the surface passivation by thiourea. In addition to thiourea, cysteine and thioacetamide that contain the thiol group can also be used to trigger this transformation. This work can not only offer a facile method for the synthesis of efficient and stable ultrathin CsPbBr₃ NWs but also help to reveal the in-depth mechanisms which may be very useful in the field of metal halide perovskite NCs.

Reversible transformation between CsPbBr3 nanowires and nanoparticles

We show that CsPbBr₃ nanowires (NWs) are formed by the hierarchical arrangement of individual nanoparticles (NPs), and reversible transformation from NWs to NPs is also achieved by anion exchange.

Boosting Tunable Blue Luminescence of Halide Perovskite Nanoplatelets through Postsynthetic Surface Trap Repair

The easily tunable emission of halide perovskite nanocrystals throughout the visible spectrum makes them an extremely promising material for light-emitting applications. Whereas high quantum yields and long-term colloidal stability have already been achieved for nanocrystals emitting in the red and green spectral range, the blue region currently lags behind with low quantum yields, broad emission profiles, and insufficient colloidal stability. In this work, we present a facile synthetic approach for obtaining two-dimensional CsPbBr₃ nanoplatelets with monolayer-precise control over their thickness, resulting in sharp photoluminescence and electroluminescence peaks with a tunable emission wavelength between 432 and 497 nm due to quantum confinement. Subsequent addition of a PbBr₂-ligand solution repairs surface defects likely stemming from bromide and lead vacancies in a subensemble of weakly emissive nanoplatelets. The overall photoluminescence quantum yield of the blue-emissive colloidal dispersions is consequently enhanced up to a value of 73 ± 2%. Transient optical spectroscopy measurements focusing on the excitonic resonances further confirm the proposed repair process. Additionally, the high stability of these nanoplatelets in films and to prolonged ultraviolet light exposure is shown.

Emergence of Nanoplatelet Light-Emitting Diodes

Since 2014, nanoplatelet light-emitting diodes (NPL-LEDs) have been emerged as a new kind of LEDs. At first, NPL-LEDs are mainly realized by CdSe based NPLs. Since 2016, hybrid organic-inorganic perovskite NPLs are found to be effective to develop NPL-LEDs. In 2017, all-inorganic perovskite NPLs are also demonstrated for NPL-LEDs. Therefore, the development of NPL-LEDs is flourishing. In this review, the fundamental concepts of NPL-LEDs are first introduced, then the main approaches to realize NPL-LEDs are summarized and the recent progress of representative NPL-LEDs is highlighted, finally the challenges and opportunities for NPL-LEDs are presented.

Low-temperature benchtop-synthesis of all-inorganic perovskite nanowires

A facile, low-temperature precipitation-based method is utilized for the synthesis of ultra-thin and highly uniform cesium lead bromide perovskite nanowires (NWs). The reactions facilitate the NWs' crystalline nature over micron-size lengths, while they impart tailored nanowire widths that range from the quantum confinement regime (∼7 nm) down to 2.6 nm. This colloidal synthesis approach is the first of its kind that is carried out on the work-bench, without demanding chemical synthesis equipment. Importantly, the NWs' photoluminescence is shown to improve over time, with no requirement for tedious post-synthesis surface treatment.

Improving the Stability and Size Tunability of Cesium Lead Halide Perovskite Nanocrystals Using Trioctylphosphine Oxide as the Capping Ligand

Recently, all-inorganic cesium lead halide (CsPbX₃, X = Cl, Br, and I) nanocrystals (NCs) have drawn wide attention because of their excellent optoelectronic properties and potential applications. However, one of the most significant challenges of such NCs is their low stability against protonic solvents. In this work, we demonstrate that by incorporating a highly branched capping ligand, trioctylphosphine oxide (TOPO), into the traditional oleic acid/oleylamine system, monodisperse CsPbX₃ NCs with excellent optoelectronic properties can be achieved at elevated temperatures (up to 260 °C). The size of such NCs can be varied in a relatively wide range. The capping of TOPO on NCs has been verified through Fourier transform infrared spectroscopy measurement. More importantly, the presence of TOPO can dramatically improve the stability of CsPbX₃ NCs against ethanol treatment. After ethanol treatment for 100 min, the emission intensity of the TOPO-capped sample dropped only 5%, whereas that of non-TOPO-capped NCs dropped up to 86%. This work may shed some light on the preparation and application of CsPbX₃ NCs with higher stability.

2D Behaviors of Excitons in Cesium Lead Halide Perovskite Nanoplatelets

Fundamental to understanding and predicting the optoelectronic properties of semiconductors is the basic parameters of excitons such as oscillator strength and exciton binding energy. However, such knowledge of CsPbBr₃ perovskite, a promising optoelectronic material, is still unexplored. Here we demonstrate that quasi-two-dimensional (quasi-2D) CsPbBr₃ nanoplatelets (NPLs) with 2D exciton behaviors serve as an ideal system for the determination of these parameters. It is found that the oscillator strength of CsPbBr₃ NPLs is up to 1.18 × 10⁴, higher than that of colloidal II-VI NPLs and epitaxial quantum wells. Furthermore, the exciton binding energy is determined to be of ∼120 meV from either the optical absorption or the photoluminescence analysis, comparable to that reported in colloidal II-VI quantum wells. Our work provides physical understanding of the observed excellent optical properties of CsPbBr₃ nanocrystals and would benefit the prediction of high-performance excitonic devices based on such materials.

Growth and characterization of all-inorganic lead halide perovskite semiconductor CsPbBr3 single crystals

The crystal structure transforms from orthorhombic to tetragonal at 88 °C and then to cubic at 130 °C.