Regioselective plasmonic nano-assemblies for bimodal sub-femtomolar dopamine detection

Plasmonic Coupling on an Optical Microfiber Surface: Enabling Single-Molecule and Noninvasive Dopamine Detection

Optical fibers can be effective biosensors when employed in early-stage diagnostic point-of-care devices as they can avoid interference from molecules with similar redox potentials. Nevertheless, their sensitivity needs to be improved for real-world applications, especially for small-molecule detection. This work demonstrates an optical microfiber biosensor for dopamine (DA) detection based on the DA-binding-induced aptamer conformational transitions that occur at plasmonic coupling sites on a double-amplified nanointerface. The sensor exhibits ultrahigh sensitivity when detecting DA molecules at the single-molecule level; additionally, this work provides an approach for overcoming optical device sensitivity limits, further extending optical fiber single-molecule detection to a small molecule range (e.g., DA and metal ions). The selective energy enhancement and signal amplification at the binding sites effectively avoid nonspecific amplification of the whole fiber surface which may lead to false-positive results. The sensor can detect single-molecule DA signals in body-fluids. It can detect the released extracellular DA levels and monitor the DA oxidation process. An appropriate aptamer replacement allows the sensor to be used for the detection of other target small molecules and ions at the single-molecule level. This technology offers alternative opportunities for developing noninvasive early-stage diagnostic point-of-care devices and flexible single-molecule detection techniques in theoretical research.

Quantitative detection of dopamine in human serum with surface-enhanced Raman scattering (SERS) of constrained vibrational mode

Dopamine (DA) is a crucial neurotransmitter involved in the hormonal, nervous, and vascular systems being considered as an index to diagnose neurodegenerative diseases, including Parkinson's and Alzheimer's disease. Herein, we demonstrate the quantitative sensing of DA using the peak shift in surface-enhanced Raman scattering (SERS) of 4-mercaptophenylboronic acid (4-MPBA), resulting from the concentration of DA. To enable the signal enhancement of Raman scattering, Ag nanostructure was built with one-step gas-flow sputtering. 4-MPBA was then introduced using vapor-based deposition, acting as a reporter molecule for bonding with DA. The gradual peak-shift from 1075.6 cm^-1 to 1084.7 cm^-1 was observed with the increasing concentration of DA from 1 pM to 100nM. The numerical simulation revealed that DA bonding induced a constrained vibrational mode corresponding to 1084.7 cm^-1 instead of a C-S-coupled C-ring in-plane bending mode of 4-MPBA corresponding to 1075.6 cm^-1. Proposed SERS sensors depicted reliable DA detection in human serum and good selectivity against other analytes, including glucose, creatinine, and uric acid.

A Review on Integrated ZnO-Based SERS Biosensors and Their Potential in Detecting Biomarkers of Neurodegenerative Diseases

Surface-enhanced Raman spectroscopy (SERS) applications in clinical diagnosis and spectral pathology are increasing due to the potential of the technique to bio-barcode incipient and differential diseases via real-time monitoring of biomarkers in fluids and in real-time via biomolecular fingerprinting. Additionally, the rapid advancements in micro/nanotechnology have a visible influence in all aspects of science and life. The miniaturization and enhanced properties of materials at the micro/nanoscale transcended the confines of the laboratory and are revolutionizing domains such as electronics, optics, medicine, and environmental science. The societal and technological impact of SERS biosensing by using semiconductor-based nanostructured smart substrates will be huge once minor technical pitfalls are solved. Herein, challenges in clinical routine testing are addressed in order to understand the context of how SERS can perform in real, in vivo sampling and bioassays for early neurodegenerative disease (ND) diagnosis. The main interest in translating SERS into clinical practice is reinforced by the practical advantages: portability of the designed setups, versatility in using nanomaterials of various matter and costs, readiness, and reliability. As we will present in this review, in the frame of technology readiness levels (TRL), the current maturity reached by semiconductor-based SERS biosensors, in particular that of zinc oxide (ZnO)-based hybrid SERS substrates, is situated at the development level TRL 6 (out of 9 levels). Three-dimensional, multilayered SERS substrates that provide additional plasmonic hot spots in the z-axis are of key importance in designing highly performant SERS biosensors for the detection of ND biomarkers.

Recent advances in electrochemical sensor developments for detecting emerging pollutant in water environment

In the latest times, considerable studies have been performed closer to detecting emerging pollutant such as paracetamol in wastewater. Electrochemical sensor developments have recently started to determine in fewer concentrations effectively. The detection of paracetamol using standard protocols corresponding to electroanalytical techniques has a greater impact noticed in directing the detecting process toward biosensors. Non-enzymatic sensors are the peak of all electro analysis approaches. Functionalized materials, such as metal oxide nanoparticles, conducting polymers, and carbon-based materials for electrode surface functionalization have been used to create a fortification for distributing passive enzyme-free biosensors. Synergic effects are possible by enhancing loading capacity and mass transfer of reactants for attaining high analytical sensitivity using a variety of nanomaterials with large surface areas. The main focus of this study is to address the prevailing issues in the identification of paracetamol with the tasks in the non-enzymatic sensors field, followed by the useful methods of electro analysis studies.

DNA Origami-Templated Bimetallic Nanostar Assemblies for Ultra-Sensitive Detection of Dopamine

The abundance of hotspots tuned via precise arrangement of coupled plasmonic nanostructures highly boost the surface-enhanced Raman scattering (SERS) signal enhancements, expanding their potential applicability to a diverse range of applications. Herein, nanoscale assembly of Ag coated Au nanostars in dimer and trimer configurations with tunable nanogap was achieved using programmable DNA origami technique. The resulting assemblies were then utilized for SERS-based ultra-sensitive detection of an important neurotransmitter, dopamine. The trimer assemblies were able to detect dopamine with picomolar sensitivity, and the assembled dimer structures achieved SERS sensitivity as low as 1 fM with a limit of detection of 0.225 fM. Overall, such coupled nanoarchitectures with superior plasmon tunability are promising to explore new avenues in biomedical diagnostic applications.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

Recent advances in colorimetry/fluorimetry-based dual-modal sensing technologies

Tailored to the increasing demands for sensing technologies, the fabrication of dual-modal sensing technologies through combining two signal transduction channels into one method has been proposed and drawn considerable attention. The integration of two sensing signals not only promotes the analytical efficiency with reduced assumption, but also improves the analytical performances with enlarged detection linear range, enhanced accuracy, and boosted application flexibility. The two top-rated output signals for developing dual-modal sensors are colorimetric and fluorescent signals because of their outstanding merits for point of care applications and real-time sensitive sensing. Given the rapid development of material chemistry and nanotechnology, the recent decade has witnessed great advance in colorimetric/fluorimetric signal based dual-modal sensing technologies. The new sensing strategy leads to a broad avenue for various applications in disease diagnosis, environmental monitoring and food safety because of the complementary and synergistic effects of the two output signals. In this state-of-the-art review, we comprehensively summarize different types of colorimetric/fluorimetric dual-modal sensing methods by highlighting representative research in the last 5 years, digging into their sensing methodologies, particularly the working principles of the signal transduction systems. Then, the challenges and future prospects for boosting further development of this research field are discussed.

Rational Confinement of Yttrium Vanadate within Three-Dimensional Graphene Aerogel: Electrochemical Analysis of Monoamine Neurotransmitter (Dopamine)

Real-time monitoring of neurotransmitter levels is of tremendous technological demand, which requires more sensitive and selective sensors over a dynamic concentration range. As a use case, we report yttrium vanadate within three-dimensional graphene aerogel (YVO/GA) as a novel electrocatalyst for detecting dopamine (DA). This synergy effect endows YVO/GA nanocomposite with good electrochemical behaviors for DA detection compared to other electrodes. Benefiting from tailorable properties, it provides a large specific surface area, rapid electron transfer, more active sites, good catalytic activity, synergic effect, and high conductivity. The essential analytical parameters were estimated from the calibration plot, such as a limit of detection (1.5 nM) and sensitivity (7.1 μA μM^-1 cm^-2) with the YVO/GA sensor probe electrochemical approach. The calibration curve was fitted with the correlation coefficient of 0.994 in the DA concentration range from 0.009 to 83 μM, which is denoted as the linear working range. We further demonstrate the proposed YVO/GA sensor's applicability to detect DA in human serum sample with an acceptable recovery range. Our results imply that the developed sensor could be applied to the early analysis of dementia, psychiatric, and neurodegenerative disorders.

Raman spectroscopy and neuroscience: from fundamental understanding to disease diagnostics and imaging

Neuroscience would directly benefit from more effective detection techniques, leading to earlier diagnosis of disease. The specificity of Raman spectroscopy is unparalleled, given that a molecular fingerprint is attained for each species. It also allows for label-free detection with relatively inexpensive instrumentation, minimal sample preparation, and rapid sample analysis. This review summarizes Raman spectroscopy-based techniques that have been used to advance the field of neuroscience in recent years.

Fine-tunable fluorescence quenching properties of core-satellite assemblies of gold nanorod-nanosphere: Application in sensitive detection of Hg2

In this work, we developed a simple, effective fluorescence method to detect Hg²⁺ by inhibiting core-satellite assemblies of gold nanorods (AuNRs) and gold nanospheres (AuNPs). The fluorescence of Rhodamine 6G (Rh6G), which was simply mixed with the nanoassemblies, was efficiently quenched by the inner filter effect (IFE). When the heterogenous core-satellite nanostructures were assembled, the corresponding local surface plasmon resonance (LSPR) absorption shifts and broadens which results in the increase of the spectral overlap between the emission peak and the absorption band and more efficient energy transfer from Rh6G to nanoparticles. Fluorescence quenching efficiency is related to the size and number density of satellite nanoparticles. It is interesting that the AuNR-AuNP assemblies with the moderate size and high density of AuNPs have the best fluorescence quenching efficiency. In the presence of Hg²⁺, p-aminothiophenol (p-ATP) breaks away from the surface of AuNRs and competitively bounds to Hg²⁺, resulting in a low yield of the AuNR-AuNP assemblies, which further leads to the decrease of fluorescence quenching efficiency. Under the optimum conditions, the limit of detection (LOD) for Hg²⁺ was 0.18 nM, with an excellent linear response from 0.6 to 800 nM. Interference experiment and real samples detection indicate that these nanosensors endowed with higher sensitivity and selectivity for the detection of Hg²⁺ in the real samples. Compared with the conventional Hg²⁺ detection techniques, this method based on Hg²⁺ induced inhibition of core-satellite AuNR-AuNP assemblies has better performance and is suitable for the detection of Hg²⁺.

DNA-Driven Nanoparticle Assemblies for Biosensing and Bioimaging

DNA molecules with superior flexibility, affinity and programmability have garnered considerable attention for the controllable assembly of nanoparticles (NPs). By controlling the density, length and sequences of DNA on NPs, the configuration of NP assemblies can be rationally designed. The specific recognition of DNA enables changes to be made to the spatial structures of NP assemblies, resulting in differences in tailorable optical signals. Comprehensive information on the fabrication of DNA-driven NP assemblies would be beneficial for their application in biosensing and bioimaging. This review analyzes the progress of DNA-driven NP assemblies, and discusses the tunable configurations determined by the structural parameters of DNA skeletons. The collective optical properties, such as chirality, fluorescence and surface enhanced Raman resonance (SERS), etc., of DNA-driven NP assemblies are explored, and engineered tailorable optical properties of these spatial structures are achieved. We discuss the development of DNA-directed NP assemblies for the quantification of DNA, toxins, and heavy metal ions, and demonstrate their potential application in the biosensing and bioimaging of tumor markers, RNA, living metal ions and phototherapeutics. We hihghlight possible challenges in the development of DNA-driven NP assemblies, and further direct potential prospects in the practical applications of macroscopical materials and photonic devices.

A Review of Chinese Raman Spectroscopy Research Over the Past Twenty Years

This paper introduces the major Chinese research groups in the fields of biomedicine, food safety, environmental testing, material research, archaeological and cultural relics, gem identification, forensic science, and other research areas of Raman spectroscopy and combined methods spanning the two decades from 1997 to 2017. Briefly summarized are the research directions and contents of the major Chinese Raman spectroscopy research groups, giving researchers engaged in Raman spectroscopy research a more comprehensive understanding of the state of Chinese Raman spectroscopy research and future development trends to further develop Raman spectroscopy and its applications.

Present and Future of Surface-Enhanced Raman Scattering

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

A core-shell molybdenum nanoparticles entrapped f-MWCNTs hybrid nanostructured material based non-enzymatic biosensor for electrochemical detection of dopamine neurotransmitter in biological samples

Dopamine (DA) is a critical neurotransmitter and has been known to be liable for several neurological diseases. Hence, its sensitive and selective detection is essential for the early diagnosis of diseases related to abnormal levels of DA. In this study, we reported novel molybdenum nanoparticles self-supported functionalized multiwalled carbon nanotubes (Mo NPs@f-MWCNTs) based core-shell hybrid nanomaterial with an average diameter of 40–45 nm was found to be the best for electrochemical DA detection. The Mo NPs@f-MWCNTs hybrid material possesses tremendous superiority in the DA sensing is mainly due to the large surface area and numerous electroactive sites. The morphological and structural characteristics of the as-synthesized hybrid nanomaterial were examined by XRD, Raman, FE-SEM, HR-TEM, EDX. The electrochemical characteristics and catalytic behavior of the as-prepared Mo NPs@f-MWCNTs modified screen-printed carbon electrode for the determination of DA were systematically investigated via electrochemical impedance spectroscopy, cyclic voltammetry, and amperometry. The results demonstrate that the developed DA biosensor exhibit a low detection limit of 1.26 nM, excellent linear response of 0.01 µM to 1609 µM with good sensitivity of 4.925 µA µM⁻¹ cm⁻². We proposed outstanding appreciable stability sensor was expressed to the real-time detection of DA in the real sample analysis of rat brain, human blood serum, and DA hydrochloride injection.

Competitive method for fluorescent dopamine detection in cerebrospinal fluid based on the peroxidase-like activity of ficin

Dopamine (DA), a catecholamine neurotransmitter, is considered to be an important indicator for mental diseases detection in the clinic. In this study, a novel fluorescent sensing platform consisting of the ficin-H₂O₂-tyramine system for determining DA in cerebrospinal fluids (CSF) was established. The proposed method is based on the fact that ficin, a mimetic peroxidase, can catalyze H₂O₂ decomposition into OH radicals, which can oxidize non-fluorescent tyramine into fluorescent dityramine. When DA was introduced, DA can compete with tyramine for OH and resulting in the oxidation reaction of tyramine inhibited along with the fluorescence intensity of the system decreased, which provides a unique strategy for fluorescence detection of DA. Under optimal conditions, the fluorescence intensity decreased linearly with the DA level over a wide concentration range from 0.05 to 12.0 μM (R² = 0.995) with a detection limit of 46 nM (3σ/k). More importantly, the proposed sensing approach exhibits high sensitivity, good selectivity and has been successfully applied to DA sensing in complex biological samples, which made it hold great potential for DA determination in chemical and biological analytical applications.

Conformational sensitivity of surface selection rules for quantitative Raman identification of small molecules in biofluids

Biofluid analysis by surface-enhanced Raman scattering (SERS) is usually hindered by nonspecific interferences. It is challenging to drive targeted molecules towards sensitive areas with specific capture and quantitative recognition in complex biofluids. Herein, a highly specific and quantitative SERS analyzer for small molecule dopamine (DA) in serum is demonstrated on a portable Raman device by virtue of a transducer of mercaptophenylboronic acid (MPBA) and a site-directed decoration of plasmonic Ag dendrites on a superhydrophobic surface. Theoretical simulations of molecular vibrations and charge distributions demonstrate the predomination of Raman surface selection rules in molecular reorientation upon the binding of DA. This recognition event is translated into ratiometric changes in the spectral profile which evidences excellent capability on SERS quantitation. The rules can well distinguish DA from its common interferents including fructose, glucose, sucrose and ascorbic acid which all generate weak but completely opposite spectral changes. Moreover, benefitting from the wettability difference, the target DA in diluted serum can be specifically enriched on a transducer-capped Ag surface, and the adsorption of other interferences is resisted by superhydrophobic features. It paves a new way for labelling a single SERS tag to simultaneously realize the identification and quantification of small molecules in complex biological media.

Large-Scale Fabrication of Ultrasensitive and Uniform Surface-Enhanced Raman Scattering Substrates for the Trace Detection of Pesticides

Technology transfer from laboratory into practical application needs to meet the demands of economic viability and operational simplicity. This paper reports a simple and convenient strategy to fabricate large-scale and ultrasensitive surface-enhanced Raman scattering (SERS) substrates. In this strategy, no toxic chemicals or sophisticated instruments are required to fabricate the SERS substrates. On one hand, Ag nanoparticles (NPs) with relatively uniform size were synthesized using the modified Tollens method, which employs an ultra-low concentration of Ag⁺ and excessive amounts of glucose as a reducing agent. On the other hand, when a drop of the colloidal Ag NPs dries on a horizontal solid surface, the droplet becomes ropy, turns into a layered structure under gravity, and hardens. During evaporation, capillary flow was burdened by viscidity resistance from the ropy glucose solution. Thus, the coffee-ring effect is eliminated, leading to a uniform deposition of Ag NPs. With this method, flat Ag NPs-based SERS active films were formed in array-well plates defined by hole-shaped polydimethylsiloxane (PDMS) structures bonded on glass substrates, which were made for convenient detection. The strong SERS activity of these substrates allowed us to reach detection limits down to 10⁻¹⁴ M of Rhodamine 6 G and 10⁻¹⁰ M of thiram (pesticide).

In Vitro and In Vivo SERS Biosensing for Disease Diagnosis

For many disease states, positive outcomes are directly linked to early diagnosis, where therapeutic intervention would be most effective. Recently, trends in disease diagnosis have focused on the development of label-free sensing techniques that are sensitive to low analyte concentrations found in the physiological environment. Surface-enhanced Raman spectroscopy (SERS) is a powerful vibrational spectroscopy that allows for label-free, highly sensitive, and selective detection of analytes through the amplification of localized electric fields on the surface of a plasmonic material when excited with monochromatic light. This results in enhancement of the Raman scattering signal, which allows for the detection of low concentration analytes, giving rise to the use of SERS as a diagnostic tool for disease. Here, we present a review of recent developments in the field of in vivo and in vitro SERS biosensing for a range of disease states including neurological disease, diabetes, cardiovascular disease, cancer, and viral disease.

Development of a SERS strategy to overcome the nanoparticle stabilisation effect in serum-containing samples: Application to the quantification of dopamine in the culture medium of PC-12 cells

The analysis of serum samples by surface-enhanced Raman spectroscopy (SERS) has gained ground over the last few years. However, the stabilisation of colloids by the proteins contained in these samples has restricted their use in common practice, unless antibodies or aptamers are used. Therefore, this work was dedicated to the development of a SERS methodology allowing the analysis of serum samples in a simple and easy-to-implement way. This approach was based on the pre-aggregation of the colloid with a salt solution. Gold nanoparticles (AuNPs) were used as the SERS substrate and, owing to its physiopathological importance, dopamine was chosen as a model to implement the SERS approach. The presence of this neurotransmitter could be determined in the concentration range 0.5-50 ppm (2.64-264 µM) in the culture medium of PC-12 cells, with a R² of 0.9874, and at even lower concentrations (0.25 ppm, 1.32 µM) in another matrix containing fewer proteins. Moreover, the effect of calcium and potassium on the dopamine exocytosis from PC-12 cells was studied. Calcium was shown to have a predominant and dose-dependant effect. Finally, PC-12 cells were exposed to dexamethasone in order to increase their biosynthesis and release of dopamine. This increase was monitored with the developed SERS approach.

Gold Nanoparticle-Based Paper Sensor for Simultaneous Detection of 11 Benzimidazoles by One Monoclonal Antibody

A colloidal gold immunochromatographic assay based on a generic monoclonal antibody is developed for the simultaneous detection of benzimidazoles and metabolite residues in milk samples. The monoclonal antibody is prepared using 2-(methoxycarbonylamino)-3H-benzimidazole-5-carboxylic acid as the hapten, and it can recognize 11 types of benzimidazoles simultaneously. The immunochromatographic strip is assembled and labeled using gold nanoparticles. This strip can detect 11 benzimidazoles including albendazole, albendazole s-oxide, albendazole sulfone, fenbendazole, fenbendazole sulfone, flubendazole, mebendazole, parbendazole, oxfendazole, oxibendazole, and carbendazim within 15 min in milk samples. Results are obtained visually with the naked eye, and the cutoff values and the visual limit of detection values for these benzimidazoles are 25, 6.25, 12.5, 12.5, 50, 25, 50, 50, 50, 6.25, and 25 ng mL^-1 , and 6.25, 3.125, 3.125, 1.56, 12.5, 6.25, 12.5, 12.5, 6.25, 0.78, and 12.5 ng mL^-1 , respectively. Results are also obtained using a hand-held strip scan reader, with calculated limit of detection values for these benzimidazoles of 0.83, 0.77, 1.83, 0.98, 7.67, 3.50, 3.96, 5.71, 0.92, 0.59, and 1.69 ng mL^-1 , respectively. In short, the developed paper sensor is a useful tool for rapid and simple screening of residues of benzimidazoles in milk samples.

Nanoplasmonic Alloy of Au/Ag Nanocomposites on Paper Substrate for Biosensing Applications

Plasmonic alloy has attracted much interest in tailoring localized surface plasmon resonance (LSPR) for recent biosensing techniques. In particular, paper-based plasmonic substrates allow capillary-driven lateral flow as well as three-dimensional metal nanostructures, and therefore they become actively transferred to LSPR-based biosensing such as surface-enhanced Raman spectroscopy (SERS) or metal-enhanced fluorescence (MEF). However, employing plasmonic alloy nanoislands on heat-sensitive substrate is still challenging, which significantly inhibits broad-range tailoring of the plasmon resonance wavelength (PRW) for superior sensitivity. Here we report paper-based plasmonic substrate with plasmonic alloy of Au/Ag nanocomposites for highly sensitive MEF and SERS biosensing applications. The nanofabrication procedures include concurrent deposition of Au and Ag below 100 °C without any damage on cellulose fibers. The Au/Ag nanocomposites feature nanoplasmonic alloy with single plasmon peak as well as broad-range tunability of PRW by composition control. This paper-based plasmonic alloy substrate enables about twofold enhancement of fluorescence signals and selective MEF after paper chromatography. The experimental results clearly demonstrate extraordinary enhancement in SERS signals for picomolar detection of folic acid as a cancer biomarker. This new method provides huge opportunities for fabricating plasmonic alloy on heat-sensitive substrate and biosensing applications.

Biological Molecules-Governed Plasmonic Nanoparticle Dimers with Tailored Optical Behaviors

Self-assembly opens new avenues to direct the organization of nanoparticles (NPs) into discrete structures with predefined configuration and association numbers. Plasmonic NP dimers provide a well-defined system for investigating the plasmonic coupling and electromagnetic (EM) interaction in arrays of NPs. The programmability and structural plasticity of biomolecules offers a convenient platform for constructing of NP dimers in a controllable way. Plasmonic coupling of NPs enables dimers to exhibit tunable optical properties, such as surface-enhanced Raman scattering (SERS), chirality, photoluminescence, and electrochemiluminescence (ECL) properties, which can be tailored by altering the biomolecules, the building blocks with distinct compositions, sizes and morphology, the interparticle distances, as well as the geometric configuration of the constituent NPs. An overview of recent developments in biological molecules-governed NP dimers, the tailored optical behaviors, and challenges in enhancing optical signals and proposing plasmonic biosensors are discussed in this Perspective.

ZnO nanotubes supported molecularly imprinted polymers arrays as sensing materials for electrochemical detection of dopamine

In this study, ZnO nanotubes (ZNTs) were prepared onto fluorine-doped tin oxide (FTO) glass and used as supports for MIPs arrays fabrication. Due to the imprinted cavities are always located at both inner and outer surface of ZNTs, these ZNTs supported MIPs arrays have good accessibility towards template and can be used as sensing materials for chemical sensors with high sensitivity, excellent selectivity and fast response. Using K₃[Fe(CN)₆] as electron probe, the fabricated electrochemical sensor shows two linear dynamic ranges (0.02-5μM and 10-800μM) towards dopamine. This proposed electrochemical sensor has been applied for dopamine determination with satisfied recoveries and precision. More complex human urine samples also confirmed that the proposed method has good accuracy for dopamine determination in real biological samples. These results suggest potential applicability of the proposed method and sensor in important molecule analysis.