Effect of Brønsted Acids on the Activation of Mixed Anhydride/Mixed Carbonic Anhydride and C-Terminal-Free N-Methylated Peptide Synthesis in a Micro-Flow Reactor

Amidations employing mixed (carbonic) anhydrides have long been favoured in peptide synthesis because of their cost-effectiveness and less waste generation. Despite their long history, no study has compared the effects of additives on the activation of mixed anhydrides and carbonic anhydrides. In this study, we investigated the amidation of mixed (carbonic) anhydride in the presence of a base and/or Brønsted acids. The use of NMI⋅HCl significantly improved the conversion of the mixed carbonic anhydride, while expediting nucleophilic attacks on the desired carbonyl group. In contrast, in the case of mixed anhydrides, neither the conversion nor the desired nucleophilic attack improved significantly. We developed a C-terminus-free N-methylated peptide synthesis method using mixed carbonic anhydrides in a micro-flow reactor. Fourteen N-alkylated peptides were synthesized in moderate to high yields (55-99 %) without severe racemization (<1 %). Additionally, a significant enhancement in the amidation between mixed carbonic anhydrides and bis-TMS-protected N-methyl amino acids with the inclusion of NMI⋅HCl was observed for the first time. In addition, we observed unexpected C-terminal epimerization of the C-terminus-free N-methyl peptides.

Amide Bonds Meet Flow Chemistry: A Journey into Methodologies and Sustainable Evolution

Formation of amide bonds is of immanent importance in organic and synthetic medicinal chemistry. Its presence in "traditional" small-molecule active pharmaceutical ingredients, in linear or cyclic oligo- and polypeptidic actives, including pseudopeptides, has led to the development of dedicated synthetic approaches for the formation of amide bonds starting from, if necessary, suitably protected amino acids. While the use of solid supported reagents is common in traditional peptide synthesis, similar approaches targeting amide bond formation in continuous-flow mode took off more significantly, after a first publication in 2006, only a couple of years ago. Most efforts rely upon the transition of traditional approaches in flow mode, or the combination of solid-phase peptide synthesis principles with flow chemistry, and advantages are mainly seen in improving space-time yields. This Review summarizes and compares the various approaches in terms of basic amide formation, peptide synthesis, and pseudopeptide generation, describing the technological approaches and the advantages that were generated by the specific flow approaches. A final discussion highlights potential future needs and perspectives in terms of greener and more sustainable syntheses.

Continuous Flow Processes as an Enabling Tool for the Synthesis of Constrained Pseudopeptidic Macrocycles

Herein we report our efforts to develop a continuous flow methodology for the efficient preparation of pseudopeptidic macrocyclic compounds containing the hexahydropyrrolo-[3,4-f]-isoindolocyclophane scaffold and involving four coupled substitution reactions in the macrocyclization process. Appropriate design of a supported base permitted the continuous production of the macrocycles even at large scales, taking advantage of the positive template effect promoted by the bromide anions. In addition, the use of flow protocols allowed a ca. 20-fold increase in productivity as well as reducing the environmental impact almost 2 orders of magnitude, in comparison with the related batch macrocyclization process.

Rapid mild macrocyclization of depsipeptides under continuous flow: total syntheses of five cyclodepsipeptides

A systematic investigation of the flow macrocyclization approaches for five destruxin analogues natural products at three different cyclization point has been reported.

Rapid and Mild Lactamization Using Highly Electrophilic Triphosgene in a Microflow Reactor

Lactams are cyclic amides that are indispensable as drugs and as drug candidates. Conventional lactamization includes acid-mediated and coupling-agent-mediated approaches that suffer from narrow substrate scope, much waste, and/or high cost. Inexpensive, less-wasteful approaches mediated by highly electrophilic reagents are attractive, but there is an imminent risk of side reactions. Herein, a methods using highly electrophilic triphosgene in a microflow reactor that accomplishes rapid (0.5-10 s), mild, inexpensive, and less-wasteful lactamization are described. Methods A and B, which use N-methylmorpholine and N-methylimidazole, respectively, were developed. Various lactams and a cyclic peptide containing acid- and/or heat-labile functional groups were synthesized in good to high yields without the need for tedious purification. Undesired reactions were successfully suppressed, and the risk of handling triphosgene was minimized by the use of microflow technology.

Photochemical Methods for Peptide Macrocyclisation

Photochemical reactions have been the subject of renewed interest over the last two decades, leading to the development of many new, diverse and powerful chemical transformations. More recently, these developments have been expanded to enable the photochemical macrocyclisation of peptides and small proteins. These constructs benefit from increased stability, structural rigidity and biological potency over their linear counterparts, providing opportunities for improved therapeutic agents. In this review, an overview of both the established and emerging methods for photochemical peptide macrocyclisation is presented, highlighting both the limitations and opportunities for further innovation in the field.

Synthesis of Nucleoside Derivatives of N-Acetyl-7-nitroindoline, Their Incorporation into the DNA Oligomer, and Evaluation of Their Photoreactivity in the DNA/RNA Duplex

N-Acetyl-7-nitroindoline has a characteristic reaction in that its acetyl group is photo-activated to acetylate amines to form amides. In this study, the N-acetyl-7-nitroindoline part was connected to the 2'-deoxyribose part at the 3- or 5-position or to a glycerol unit at the 3-position through an ethylene linker (1, 2, and 3, respectively). They were incorporated into the oligodeoxynucleotides, and their photo-reactivities toward the complementary RNA were evaluated. The acetyl group of 1 was photo-activated to form the deacelylated nitroso derivative without affecting the RNA strand. The photoreaction with 2 suggested acetylation of the RNA strand. In contrast, compound 3 formed the photo-cross-linked adduct with the RNA. These results have shown the potential application of N-acetyl-7-nitroindoline unit in aqueous solutions.

A decade review of triphosgene and its applications in organic reactions

This review article highlights selected advances in triphosgene-enabled organic synthetic reactions that were reported in the decade of 2010-2019. Triphosgene is a versatile reagent in organic synthesis. It serves as a convenient substitute for the toxic phosgene gas. Despite its first known preparation in the late 19th interestingly began only three decades ago. Despite the relatively short history, triphosgene has been proven to be very useful in facilitating the preparation of a vast scope of value-added compounds, such as organohalides, acid chlorides, isocyanates, carbonyl addition adducts, heterocycles, among others. Furthermore, applications of triphosgene in complex molecules synthesis, polymer synthesis, and other techniques, such as flow chemistry and solid phase synthesis, have also emerged in the literature.

Recent Advances in Continuous-Flow Reactions Using Metal-Free Homogeneous Catalysts

Developments that result in high-yielding, low-cost, safe, scalable, and less-wasteful processes are the most important goals in synthetic organic chemistry. Continuous-flow reactions have garnered much attention due to many advantages over conventional batch reactions that include precise control of short reaction times and temperatures, low risk in handling dangerous compounds, and ease in scaling up synthesis. Combinations of continuous-flow reactions with homogeneous, metal-free catalysts further enhances advantages that include low-cost and ready availability, low toxicity, higher stability in air and water, and increased synthetic efficiency due to the avoidance of the time-consuming removal of toxic metal traces. This review summarizes recently reported continuous-flow reactions using metal-free homogeneous catalysts and classifies them either as acidic catalysts, basic catalysts, or miscellaneous catalysts. In addition, we compare the results between continuous-flow conditions and conventional batch conditions to reveal the advantages of using flow reactions with metal-free homogeneous catalysts.

Rapid and Mild Synthesis of Amino Acid N-Carboxy Anhydrides: Basic-to-Acidic Flash Switching in a Microflow Reactor

Polymerization of N-carboxy anhydrides (NCAs) is the primary process used to prepare polypeptides. The synthesis of various pure NCAs is key to the efficient synthesis of polypeptides. The only practical method that can be used to synthesize NCAs requires harsh acidic conditions that make acid-labile substrates unusable and results in an undesired ring opening of NCAs. Basic-to-acidic flash switching and subsequent flash dilution technology in a microflow reactor was used to demonstrate the synthesis of NCAs. It is both rapid (0.1 s) and mild (20 °C) and includes substrates containing acid-labile functional groups. The basic-to-acidic flash switching enabled both an acceleration of the desired NCA formation and avoided the undesired ring opening of NCAs. The flash dilution precluded the undesired decomposition of acid-labile functional groups. The developed process allowed the synthesis of various NCAs which cannot be readily synthesized using conventional batch methods.