An alternating copolymer of phenothiazine and ethylenedioxythiophene for perovskite solar cells: effects of flexible and rigid substituent alternation

Developing p-type polymeric semiconductors with exceptional electrical performance, heat tolerance, and cost-effectiveness is pivotal for advancing the practical application of n-i-p perovskite solar cells. Here, we employed direct arylation polycondensation to synthesize an alternating copolymer of phenothiazine and 3,4-ethylenedioxythiophene, featuring a high glass transition temperature (175 °C). In addition to the alternation of conjugated units within the main chain, the copolymer features alternating flexible (2-octyldodecyl) and rigid (trimethylphenyl) substituents at the nitrogen positions of the phenothiazine moiety. Compared to reference polymers with solely flexible or rigid substituents, the alternating use of these moieties resulted in the polymeric semiconductor composite film with smoother morphology and enhanced hole mobility. By employing this polymer with a distinct distribution of substituents and an innovative main chain structure as a hole transport material, we fabricated perovskite solar cells achieving an average efficiency of 25.1%. These cells also exhibited excellent stabilities under conditions of 85 °C thermal storage and 45 °C operation.

Physical and Electrochemical Properties of Soluble 3,4-Ethylenedioxythiophene (EDOT)-Based Copolymers Synthesized via Direct (Hetero)Arylation Polymerization

Over the past decades, π-conjugated polymers (CPs) have drawn more and more attention and been essential materials for applications in various organic electronic devices. Thereinto, conjugated polymers based on the 3,4-ethylenedioxythiophene (EDOT) backbone are among the high-performance materials. In order to investigate the structure-property relationships of EDOT-based polymers and further improve their electrochemical properties, a series of organic solvent-soluble EDOT-based alternative copolymers consisting of electron-rich fragments (fluorene P1, carbazole P2, and 3,4-alkoxythiophene P3) or electron-deficient moieties (benzotriazole P4 and thieno[3,4-c]pyrrole-4,6-dione P5) were synthesized via direct C-H (hetero)arylation polymerization (DHAP) in moderate to excellent yields (60-98%) with medium to high molecular weights (M n = 3,100-94,000 Da). Owing to their various electronic and structural properties, different absorption spectra (λ max = 476, 380, 558, 563, and 603 nm) as well as different specific capacitances of 70, 68, 75, 51, and 25 F/g with 19, 10, 21, 26, and 69% of capacity retention after 1,000 cycles were observed for P1-P5, respectively. After careful study through multiple experimental measurements and theoretical calculation, appropriate electronic characteristics, small molecular conformation differences between different oxidative states, and well-ordered molecular stacking could improve the electrochemical performance of CPs.

Electrochromic properties of pyrene conductive polymers modified by chemical polymerization

Pyrene is composed of four benzene rings and has a unique planar melting ring structure. Pyrene is the smallest condensed polycyclic aromatic hydrocarbon, and its unique structural properties have been extensively studied. Pyrene has excellent properties such as thermal stability, high fluorescence quantum efficiency and high carrier mobility. This paper mainly used thiophene, EDOT and triphenylamine groups to enhance the pyrene based π-conjugated system and control the molecular accumulation of organic semiconductors, and improve their charge transport performances. Five kinds of polymer were synthesized and correspondingly characterized. The five kinds of pyrene conductive polymer had outstanding properties in terms of solubility, fluorescence intensity and thermal stability, good film-forming properties, stable electrochromic properties and high coloring efficiency. The coloration efficiency (CE) of PPYTP was as high as 277 cm² C⁻¹, and the switching response time was short. The coloring time of PPYEDOT was 1.3 s and the bleaching time was 3.2 s. The lower impedance will also provide the possibility of such polymers being incorporated into electrochromic devices in the future. In short, the synthesized new pyrene conductive polymers will have wide application prospects in the field of electrochromic materials.

Pyrene is composed of four benzene rings and has a unique planar melting ring structure.

A tetrameric perylene diimide non-fullerene acceptor via unprecedented direct (hetero)arylation cross-coupling reactions

This study reports on the synthesis of an indancenodithiophene perylene diimide tetramer via unique direct (hetero)arylation reactivity. The thiophene based core structure is shown to be easily functionalized with four perylene diimides at the four active C-H positions. This new reactivity provides a simple synthetic pathway towards tetrameric perylene diimides which have emerged as one of the best classes of electron acceptors for organic solar cells.

Multicolored, Low-Voltage-Driven, Flexible Organic Electrochromic Devices Based on Oligomers

In this study, a series of organic conjugated oligomers containing 3,4-ethylenedioxythiophene (EDOT) and aromatic groups are synthesized, which are as follows: 2,5-di(methyl benzoate)-3,4-ethylenedioxy-thiophene (1EDOT-2B-COOCH₃ ), 5,5'-di(methyl benzoate)-2,2'-bi(3,4-ethylenedioxythiophene) (2EDOT-2B-COOCH₃ ), 5,5″-di(methyl benzoate)-2,2':5',2″-ter(3,4-ethylenedioxythiophene) (3EDOT-2B-COOCH₃ ), and 5,5″'-di(methyl benzoate)-2,2':5',2″: 5″,2″'-quater(3,4-ethylenedioxythiophene) (4EDOT-2B-COOCH₃ ). Using these oligomers as active materials, flexible organic electrochromic devices are fabricated. The device structure is indium tin oxide-PET plastic slide (ITO-PET)/active layer/conducting gel/ITO-PET, and the electrochromic properties of oligomers are investigated. These oligomers exhibit reversible color changes upon electrochemical doping and dedoping. The highest optical contrast is exhibited by 4EDOT-2B-COOCH₃ , which is 75.2% at 700 nm.

To branch or not to branch: C–H selectivity of thiophene-based donor–acceptor–donor monomers in direct arylation polycondensation exemplified by PCDTBT

The possibility for unselective C–H activation of a thiophene-based, donor–acceptor–donor monomer during direct arylation polycondensation is investigated.

3,6-Carbazole vs 2,7-carbazole: A comparative study of hole-transporting polymeric materials for inorganic-organic hybrid perovskite solar cells

The ever increasing demand for clean energy has encouraged researchers to intensively investigate environmentally friendly photovoltaic devices. Inorganic-organic hybrid perovskite solar cells (PSCs) are very promising due to their potentials of easy fabrication processes and high power conversion efficiencies (PCEs). Designing hole-transporting materials (HTMs) is one of the key factors in achieving the high PCEs of PSCs. We now report the synthesis of two types of carbazole-based polymers, namely 3,6-Cbz-EDOT and 2,7-Cbz-EDOT, by Stille polycondensation. Despite the same chemical composition, 3,6-Cbz-EDOT and 2,7-Cbz-EDOT displayed different optical and electrochemical properties due to the different connectivity mode of the carbazole unit. Therefore, their performances as hole-transporting polymeric materials in the PSCs were also different. The device based on 2,7-Cbz-EDOT showed better photovoltaic properties with the PCE of 4.47% than that based on 3,6-Cbz-EDOT. This could be due to its more suitable highest occupied molecular orbital (HOMO) level and higher hole mobility.