Multi-dynamic-bond cross-linked antibacterial and adhesive hydrogel based on boronated chitosan derivative and loaded with peptides from Periplaneta americana with on-demand removability

The design and development of a bio-adhesive hydrogel with on-demand removability and excellent antibacterial activities are meaningful to achieve high wound closure effectiveness and post-wound-closure care, which is desirable in clinical applications. In this work, a series of adhesive antioxidant antibacterial hydrogels containing peptides from Periplaneta americana (PAP) were prepared through multi-dynamic-bond cross-linking among 3,4-dihydroxybenzaldehyde (DBA) containing catechol and aldehyde groups and chitosan grafted with 3-carboxy-4-fluorophenylboronic acid (CS-FPBA) to enable the effective adhesion of skin tissues and prevention of bacterial infection of wound. PAP was derived from alcohol-extracted residues generated during the pharmaceutical process, aiming to minimize resource wastage and achieve the high-value development of such a medicinal insect. The hydrogel was prepared by freezing-thawing with no toxic crosslinkers. The multi-dynamic-bond cross-linking of dynamic borate ester bonds and dynamic Schiff base bonds can achieve reversible breakage and re-formation and the adhesive strength of CS-FPBA-DBA-P-gel treated with a 20 % glucose solution dramatically decreased from 3.79 kPa to 0.35 kPa within 10 s. Additionally, the newly developed hydrogel presents ideal biocompatibility, hemostasis and antibacterial activity against Staphylococcus aureus and Escherichia coli compared to commercial chitosan gel (approximately 50 % higher inhibition rate), demonstrating its great potential in dealing with infected full-thickness skin wounds.

Synthesis, properties, and applications of a polyampholyte hydroxypropyl chitosan derivative with the phenylboronic acid functional group

Phenylboronic acid (PBA) groups are effective in building glucose-responsive drug delivery systems. Chitosan (CS) offers distinct advantages in the construction of PBA-based biomaterials, such as biodegradability and biocompatibility. However, challenges still persist due to the limited solubility of CS. This study proposes an efficient approach to introduce PBA groups into CS chains within 1 h via the O-(7-azabenzotriazol-1-yl)-N,N,N',N'-tetramethyluronium hexafluorophosphate (HATU)-mediated amidation between 3-carboxyphenylboronic acid (CPBA) and O-hydroxypropyl chitosan (HPCS). The results showed that a wide range of substitution degrees, from 0.15 to 0.78, could be finely controlled by the amount of CPBA added. Furthermore, the obtained novel carboxyphenylboronic acid-grafted hydroxypropyl chitosan (PBA-HPCS) derivative showed enhanced crystallinity and thermostability compared to HPCS, and it demonstrated solubility in an alkaline solution. Based on the reversible bonding between the boronic acid group and cis-1,2/1,3-diols, PBA-HPCS was successfully used as an efficient crosslinker for the preparation of hydrogels incorporating sorbitol and polyhydroxy polymers, such as guar gum and polyvinyl alcohol. These hydrogels exhibited rapid gelation, rapid self-healing, injectability, and responsiveness to glucose and pH. These findings suggest that PBA-HPCS holds promise for advancing the development of PBA-based biomaterials.

The Biocompatibility Analysis of Artificial Mucin-Like Glycopolymers

The ocular surface is covered by a tear film consisting of an aqueous/mucin phase and a superficial lipid layer. Mucins, highly O-glycosylated proteins, are responsible for lubrication and ocular surface protection. Due to contact lens wear or eye disorders, lubrication of the ocular surface can be affected. Artificial glycopolymers which mimic natural mucins could be efficient in ophthalmic therapy. Various neutral, positively, and negatively charged mucin-mimicking glycopolymers were synthesized (n = 11), cultured in different concentrations (1%, 0.1%, and 0.01% w/v) with human corneal epithelial cells (HCE), and analyzed by various cytotoxicity/viability, morphology, and immunohistochemistry (IHC) assays. Six of the eleven glycopolymers were selected for further analysis after cytotoxicity/viability assays. We showed that the six selected glycopolymers had no cytotoxic effect on HCE cells in the 0.01% w/v concentration. They did not negatively affect cell viability and displayed both morphology and characteristic markers as untreated control cells. These polymers could be used in the future as mucin-mimicking semi-synthetic materials for lubrication and protection of the ocular surface.

A decade of developing applications exploiting the properties of polyelectrolyte multilayer capsules

Transferring the layer-by-layer (LbL) coating approach from planar surfaces to spherical templates and subsequently dissolving these templates leads to the fabrication of polyelectrolyte multilayer capsules. The versatility of the coatings of capsules and their flexibility upon bringing in virtually any material into the coatings has quickly drawn substantial attention. Here, we provide an overview of the main developments in this field, highlighting the trends in the last decade. In the beginning, various methods of encapsulation and release are discussed followed by a broad range of applications, which were developed and explored. We also outline the current trends, where the range of applications is continuing to grow, including addition of whole new and different application areas.

Nanoarchitectonics beyond perfect order - not quite perfect but quite useful

Nanoarchitectonics, like architectonics, allows the design and building of structures, but at the nanoscale. Unlike those in architectonics, and even macro-, micro-, and atomic-scale architectonics, the assembled structures at the nanoscale do not always follow the projected design. In fact, they do follow the projected design but only for self-assembly processes producing structures with perfect order. Here, we look at nanoarchitectonics allowing the building of nanostructures without a perfect arrangement of building blocks. Here, fabrication of structures from molecules, polymers, nanoparticles, and nanosheets to polymer brushes, layer-by-layer assembly structures, and hydrogels through self-assembly processes is discussed, where perfect order is not necessarily the aim to be achieved. Both planar substrate and spherical template-based assemblies are discussed, showing the challenging nature of research in this field and the usefulness of such structures for numerous applications, which are also discussed here.

Hybrid Biomaterial Initiates Refractory Wound Healing via Inducing Transiently Heightened Inflammatory Responses

Inflammation plays a crucial role in triggering regeneration, while inadequate or chronic inflammation hinders the regenerative process, resulting in refractory wounds. Inspired by the ideal regeneration mode in lower vertebrates and the human oral mucosa, realigning dysregulated inflammation to a heightened and acute response provides a promising option for refractory wound therapy. Neutrophils play important roles in inflammation initiation and resolution. Here, a hybrid biomaterial is used to stimulate transiently heightened inflammatory responses by precise tempospatial regulation of neutrophil recruitment and apoptosis. The hybrid biomaterial (Gel@fMLP/SiO₂ -FasL) is constructed by loading of formyl-met-leu-phe (fMLP) and FasL-conjugated silica nanoparticles (SiO₂ -FasL) into a pH-responsive hydrogel matrix. This composition enables burst release of fMLP to rapidly recruit neutrophils for heightened inflammation initiation. After neutrophils act to produce acids, the pH-responsive hydrogel degrades to expose SiO₂ -FasL, which induces activated neutrophils apoptosis via FasL-Fas signaling triggering timely inflammation resolution. Apoptotic neutrophils are subsequently cleared by macrophages, and this efferocytosis activates key signalings to promote macrophage anti-inflammatory phenotypic transformation to drive regeneration. Ultimately, Gel@fMLP/SiO₂ -FasL successfully promotes tissue regeneration by manipulating inflammation in critical-sized calvarial bone defects and diabetic cutaneous wound models. This work provides a new strategy for refractory wound therapy via inducing transiently heightened inflammatory responses.

Glucose-Responsive Polyelectrolyte Complexes Based on Dendritic Mesoporous Silica for Oral Insulin Delivery

The postprandial glycemic regulation is essential for diabetic patients to reduce the risk of long-term microvascular and macrovascular complications. Herein, we designed a glucose-responsive oral insulin delivery system based on polyelectrolyte complexes (PECs) for controlling the increasing postprandial glucose concentrations. Briefly, alginate-g-3-aminophenylboronic acid (ALG-g-APBA) and chitosan-g-3-fluoro-4-carboxyphenylboronic acid (CS-g-FPBA) were wrapped on mesoporous silica (MSN) to form the negative charged ALG-g-APBA@MSN and the positive charged CS-g-FPBA@MSN nanoparticles, with an optimum insulin loading capacity of 124 mg/g and 295 mg/g, respectively. ALG-g-APBA@MSN was further cross-linked with CS-g-FPBA@MSN to form PECs through electrostatic interaction and borate esters. The dense polyelectrolyte network wrapped on MSN was capable of preventing insulin from diffusion and regulating its release. The in vitro insulin release of PECs demonstrated an obvious glucose response profile in different glucose concentrations (0 mg/mL, 2 mg/mL, 5 mg/mL) and presented a switch "on" and "off" release regulation at hyperglycemic or normal state. The CCK-8 assay showed that none of the MSN, ALG-g-APBA@MSN, CS-g-FPBA@MSN, and PECs possessed cytotoxicity to Caco-2 cells. For in vivo tests, the oral PECs exhibited a significant hypoglycemic effect and maintained in the euglycemic levels up to approximately 12 h on diabetic rats. Overall, the PECs directly triggered by postprandial glucose in the intestine have a good potential to be applied in intelligent insulin delivery by the oral route.

Microfluidic Fabrication of Structure-Controlled Chitosan Microcapsules via Interfacial Cross-Linking of Droplet Templates

In this work, a simple and flexible method for the fabrication of chitosan microcapsules with controllable structures and functions via the interfacial cross-linking reaction of the water-in-oil (W/O) emulsion templates is developed. The interfacial cross-linking reactions of chitosan and terephthalaldehyde (TPA) in W/O emulsion templates are comprehensively studied. The interfacial cross-linking reactions of the droplet templates in both batchwise and continuous conditions are studied. A poly(dimethylsiloxane) (PDMS) droplet-capture microfluidic chip is fabricated to investigate the interfacial reaction in continuous conditions online. In this study, the size and shell thickness of the microcapsules are affected by the preparation condition, such as the template size, emulsifier concentration, TPA concentration, and cross-linking time. Moreover, the size and shell thickness changes of chitosan microcapsules prepared in continuous conditions are much faster than those prepared in batchwise conditions. By regulating the preparation parameters, the microcapsules with controllable structures are fabricated in both batchwise and continuous conditions. The drug release behaviors of the microcapsules with controllable structures are studied. Furthermore, by adding magnetic nanoparticles to the aqueous solution, magnetic-responsive microcapsules are fabricated easily. This work provides valuable guidance for the controllable fabrication of chitosan microcapsules with designed structures and functions via single emulsion templates.

Phenylboronic acid-functionalized unimolecular micelles based on a star polyphosphoester random copolymer for tumor-targeted drug delivery

A phenylboronic acid-functionalized unimolecular micellar drug delivery system based on a star phosphoester random copolymer synthesized by a one-pot ring-opening polymerization strategy.

Sustained Release Technology and Its Application in Environmental Remediation: A Review

Sustained release technology is a class of technology characterized by slowly-releasing specific active substances into a target medium to keep a certain concentration in the system within valid time. As a new of type technology, it has been extensively applied to medicine, chemical engineering, agriculture, environmental protection, etc. The principles and classification of sustained release technologies, as well as typical preparation methods of sustained release agents, were summarized in this paper; by introducing applied research progress of sustained release technologies into environmental fields like rainwater purification, sewage/drinking water treatment, and soil and atmosphere remediation, application features of these sustained release technologies were evaluated, and their application prospect in environmental remediation, especially in water treatment, was predicted.

Preparation of Nafion/Polycation Layer-by-Layer Films for Adsorption and Release of Insulin

Thin films were prepared using layer-by-layer (LbL) deposition of Nafion (NAF) and polycations such as poly(allylamine hydrochloride) (PAH), poly(ethyleneimine) (PEI), and poly(diallydimethylammonium chloride) (PDDA). Insulin was then adsorbed on the NAF-polycation LbL films by immersion in an insulin solution. The NAF-polycation LbL films were characterized using a quartz crystal microbalance and an atomic force microscope. The release of insulin from the LbL films was characterized using UV-visible adsorption spectroscopy and fluorescence emission spectroscopy. The greatest amount of insulin was adsorbed on the NAF-PAH LbL film. The amount of insulin adsorbed on the (NAF/PAH)₅NAF LbL films by immersion in a 1 mg mL-1 insulin solution at pH 7.4 was 61.8 µg cm-2. The amount of insulin released from the LbL films was higher when immersed in insulin solutions at pH 2.0 and pH 9.0 than at pH 7.4. Therefore, NAF-polycations could be employed as insulin delivery LbL films under mild conditions and as an insulin release control system according to pH change.

Dual-sensitive chitosan derivative micelles for site-specific drug release in the treatment of chicken coccidiosis

Here, we report a “dual-sensitive” drug delivery platform packaged with anti-coccidia drug diclazuril (DIC) applied in the field of intestinal-targeted administration.

Phenylboronic Acid-Functionalized Layer-by-Layer Assemblies for Biomedical Applications

Recent progress in the development of phenylboronic acid (PBA)-functionalized layer-by-layer (LbL) assemblies and their biomedical applications was reviewed. Stimuli-sensitive LbL films and microcapsules that exhibit permeability changes or decompose in response to sugars and hydrogen peroxide (H₂O₂) have been developed using PBA-bearing polymers. The responses of PBA-modified LbL assemblies arise from the competitive binding of sugars to PBA in the films or oxidative decomposition of PBA by H₂O₂. Electrochemical glucose sensors have been fabricated by coating the surfaces of electrodes by PBA-modified LbL films, while colorimetric and fluorescence sensors can be prepared by modifying LbL films with boronic acid-modified dyes. In addition, PBA-modified LbL films and microcapsules have successfully been used in the construction of drug delivery systems (DDS). Among them, much effort has been devoted to the glucose-triggered insulin delivery systems, which are constructed by encapsulating insulin in PBA-modified LbL films and microcapsules. Insulin is released from the PBA-modified LbL assemblies upon the addition of glucose resulting from changes in the permeability of the films or decomposition of the film entity. Research into insulin DDS is currently focused on the development of high-performance devices that release insulin in response to diabetic levels of glucose (>10 mM) but remain stable at normal levels (~5 mM) under physiological conditions.

Polyelectrolyte complexes based on alginate/tanfloc: Optimization, characterization and medical application

Hydrogels based on alginate and tanfloc (a cationic biopolymer obtained from natural condensed tannins) were successfully prepared. Tanfloc (TN) presents high aqueous solubility at pHs lower than 10; it contains substituted amino sites and molar weight of ca. 600,000gmol^-1. A factorial design (2²) was used to optimize the yield of alginate/tanfloc polyelectrolyte complexes (PECs). Dialysis recovered the overplus of alginate (AG) no complexed with TN. These materials were characterized by thermal analyses (TGA/DTG and DSC), zeta potential, and FTIR, while SEM technique depicted a rough surface on AG/TN complex, containing non-homogeneous pores. Indeed, the AG and TN were tailored to elicit scaffold materials with outstanding cytocompatibility, mainly upon mouse preosteoblastic cells because of reconstruction of bone tissues (119% at 10days). The AG/TN complex also displayed antioxidant and bactericidal activities against Staphylococcus aureus (S. aureus). Besides, the pristine TN fostered bacteriostatic and bactericidal performances towards S. aureus and Escherichia coli. However, for our best knowledge, no studies were still carried out on TN and TN-based materials for medical purpose.

Boronic Acid as Glucose-Sensitive Agent Regulates Drug Delivery for Diabetes Treatment

In recent years, glucose-sensitive drug delivery systems have attracted considerable attention in the treatment of diabetes. These systems can regulate payload release by the changes of blood glucose levels continuously and automatically with potential application in self-regulated drug delivery. Boronic acid (BA), especially phenylboronic acid (PBA), as glucose-sensitive agent has been the focus of research in the design of glucose-sensitive platforms. This article reviews the previous attempts at the developments of PBA-based glucose-sensitive drug delivery systems regarding the PBA-functionalized materials and glucose-triggered drug delivery. The obstacles and potential developments of glucose-sensitive drug delivery systems based on PBA for diabetes treatment in the future are also described. The PBA-functionalized platforms that regulate drug delivery induced by glucose are expected to contribute significantly to the design and development of advanced intelligent self-regulated drug delivery systems for treatment of diabetes.

Increasing bacterial affinity and cytocompatibility with four-arm star glycopolymers and antimicrobial α-polylysine

Cationic polypeptide arms disintegrate bacterial membranes, while glycopolymer arms promote biocompatibility with simultaneous targeting of the bacterial surface.