Alternating vs. random amphiphilic polydisulfides: aggregation, enzyme activity inhibition and redox-responsive guest release

Herein, we report the synthesis of an alternating copolymer (ACP) with a bio-reducible amphiphilic polydisulfide backbone and highlight the impact of the alternating monomer connectivity on the self-assembly, morphology, chain-exchange dynamics, drug-release kinetics, and enzyme activity inhibition. Condensation polymerization between hydrophobic 1,10-bis(pyridin-2-yldisulfaneyl)decane and hydrophilic 2,3-mercaptosuccinic acid (1.04 : 1.00 ratio) generated amphiphilic ACP P1 (Mw = 8450 g mol-1, Đ = 1.3), which exhibited self-assembly in water, leading to the formation of an ultra-thin (height <5.0 nm) entangled fibrillar network. In contrast, structurally similar amphiphilic random copolymer P2 exhibited a truncated irregular disc-like morphology under the same conditions. It is postulated that due to the perfect alternating sequence of the hydrophobic and hydrophilic segments in P1, its immiscibility-driven aggregation in water leads to a pleated structure, which further assembles and forms the observed long fibrillar structures, similar to crystallization-driven self-assembly. In fact, wide-angle X-ray diffraction (WXRD) analysis of a lyophilized P1 sample showed sharp peaks, indicating its crystalline nature (approximately 37% crystallinity), and these were completely missing for P2. The effect of such distinct self-assembly on the chain-exchange dynamics was probed by fluorescence resonance energy transfer (FRET) using 3,3'-dioctadecyloxacarbocyanine perchlorate (DiO) and 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate (DiI) as the FRET-donor and -acceptor, respectively. For DiI- and DiO-entrapped solutions of P1, when mixed, no prominent FRET appeared even after 24 h. In sharp contrast, for P2, intense FRET emission occurred, and the FRET ratio (approximately 0.9) reached saturation in approximately 15 h, indicating the greatly enhanced kinetic stability of P1 aggregates. Glutathione-induced release of encapsulated Nile red showed much slower kinetics for P1 compared to that of P2, which was corroborated by the observed slow chain-exchange dynamics of the highly stable alternating copolymer assembly. Furthermore, the well-ordered assembly of P1 exhibited an excellent surface-functional group display (zeta potential of -32 mV compared to -14 mV for P2), which resulted in the effective recognition of the α-chymotrypsin (Cht) protein surface by electrostatic interaction. Consequently, P1 significantly (>70%) suppressed the enzymatic activity of Cht, while in the presence of P2, the enzyme was still active with >70% efficacy.

Stimuli-Responsive Aggregation-Induced Emission (AIE)-Active Polymers for Biomedical Applications

At high concentration or in the aggregated state, most of the traditional luminophores suffer from the general aggregation-caused quenching (ACQ) effect, which significantly limits their biomedical applications. On the contrary, a few fluorophores exhibit an aggregation-induced emission (AIE) feature which is just the opposite of ACQ. The luminophores with aggregation-induced emission (AIEgens) have exhibited noteworthy advantages to get tunable emission, excellent photostability, and biocompatibility. Incorporating AIEgens into polymer design has yielded diversified polymer systems with fascinating photophysical characteristics. Again, stimuli-responsive polymers are capable of undergoing chemical and/or physical property changes on receiving signals from single or multiple stimuli. The combination of the AIE property and stimuli responses in a single polymer platform provides a feasible and effective strategy for the development of smart polymers with promising biomedical applications. Herein, the advancements in stimuli-responsive polymers with AIE characteristics for biomedical applications are summarized. AIE-active polymers are first categorized into conventional π-π conjugated and nonconventional fluorophore systems and then subdivided based on various stimuli, such as pH, redox, enzyme, reactive oxygen species (ROS), and temperature. In each section, the design strategies of the smart polymers and their biomedical applications, including bioimaging, cancer theranostics, gene delivery, and antimicrobial examples, are introduced. The current challenges and future perspectives of this field are also stated at the end of this review article.

Fluorescent Polymers Conspectus

The development of luminescent materials is critical to humankind. The Nobel Prizes awarded in 2008 and 2010 for research on the development of green fluorescent proteins and super-resolved fluorescence imaging are proof of this (2014). Fluorescent probes, smart polymer machines, fluorescent chemosensors, fluorescence molecular thermometers, fluorescent imaging, drug delivery carriers, and other applications make fluorescent polymers (FPs) exciting materials. Two major branches can be distinguished in the field: (1) macromolecules with fluorophores in their structure and (2) aggregation-induced emission (AIE) FPs. In the first, the polymer (which may be conjugated) contains a fluorophore, conferring photoluminescent properties to the final material, offering tunable structures, robust mechanical properties, and low detection limits in sensing applications when compared to small-molecule or inorganic luminescent materials. In the latter, AIE FPs use a novel mode of fluorescence dependent on the aggregation state. AIE FP intra- and intermolecular interactions confer synergistic effects, improving their properties and performance over small molecules aggregation-induced, emission-based fluorescent materials (AIEgens). Despite their outstanding advantages (over classic polymers) of high emission efficiency, signal amplification, good processability, and multiple functionalization, AIE polymers have received less attention. This review examines some of the most significant advances in the broad field of FPs over the last six years, concluding with a general outlook and discussion of future challenges to promote advancements in these promising materials that can serve as a springboard for future innovation in the field.

A facile and economical method to synthesize a novel wide gamut fluorescent copolyester with outstanding properties

A series of high molecular weight copolyesters PExBTyAm were synthesized by a simple and economical two-step polycondensation method, and for the first time we found that the copolyesters exhibited an green fluorescence under 365 nm UV light.

Synthesis of thermoresponsive nonconjugated fluorescent branched poly(ether amide)s via oxa-Michael addition polymerization

Novel thermoresponsive nonconjugated fluorescent branched poly(ether amide)s with tunable LCST via t-BuP2-catalyzed oxa-Michael addition polymerization of N,N′-methylenebis(acrylamide) with triols.

Hydrolyzation-Triggered Ultralong Room-Temperature Phosphorescence in Biobased Nonconjugated Polymers

Amorphous nonconjugated room-temperature phosphorescent (RTP) polymers have aroused ever-increasing attention. However, the variety of such polymers is still rare due to limited preparation strategies. Herein, we report a facile strategy to achieve ultralong RTP emission in biobased nonconjugated polymers through a hydrolyzation process. The investigated polymers are synthesized by free radical solution copolymerization using biomass methyl isoeugenol and maleic anhydride as monomers. Noticeably, the obtained polymers carry no conventional fluorescent units but can exhibit blue fluorescence. More interestingly, after hydrolysis in sodium hydroxide aqueous solution, the resulting hydrolyzed polymers emit both enhanced blue emission and persistent RTP (up to 400 ms) under air conditions, with reversible emission performance switched via the uptake and removal of water. Also worthy to be highlighted is that the emission can be remarkably regulated by the cations in carboxylate or the substituents on the benzene ring. The as-obtained polymers demonstrate potential applications in anticounterfeiting and information encryption.

Styrene-Maleimide/Maleic Anhydride Alternating Copolymers: Recent Advances and Future Perspectives

Alternating sequencing of styrene-maleimide/maleic anhydride (S-MI/MA) in the copolymer chain is known for a long time. But since early 2000, this class of copolymers has been extensively studied using various living/controlled polymerization techniques to design S-MI/MA alternating copolymers with tunable molecular weight, narrow dispersity (Ð), and precise chain-end functionality. The widespread diverse applications of this polymeric backbone are due to its ease of synthesis, cheap starting materials, high precision in alternating sequencing, and facile post-polymerization functionalization with simple organic reactions. Recently, S-MI/MA alternating copolymers have been rediscovered as novel polymers with unprecedented emissive behavior. It outperforms the traditional fluorophores with no aggregation caused quenching (ACQ), aqueous solubility, and greater cell viability. Herein, the origin of alternating sequence, synthesis, and recent (2010-Present) developments in applications of these polymers in different fields are elaborately discussed, including the advantages of the unconventional luminogenic property. This review article also highlights the future research directions of the versatile S-MI/MA copolymers.

Reversible Stimuli-Dependent Aggregation-Induced Emission from a "Nonfluorescent" Amphiphilic PVDF Graft Copolymer

A poly(vinylidine fluoride) graft random copolymer of t-butyl aminoethyl methacrylate (tBAEMA) and oligo(ethylene glycol) methyl ether methacrylate (OEGMA, Mn = 300) [PVDF-g-P(tBAEMA-ran-OEGMA), PVBO] is synthesized by atom transfer radical polymerization (ATRP), and PVBO is fractionated to get a highly water-soluble fraction (PVBO-1) showing a reversible on/off fluorescence behavior with gradual increase and decrease in pH, respectively, achieving a maximum quantum yield of 0.18 at pH = 12. PVBO-1 dissolved in water shows large multimicellar aggregates (MMcA), but at pH 12, crumbling of larger aggregates to much smaller micelles occurs, forming nonconjugated polymer dots (NCPDs), as supported by transmission electron microscopy and dynamic light scattering study. The reversible fluorescence on/off behavior also occurs with the decrease and increase of temperature. Theoretical study indicates that, at high pH, most of the amino groups become neutral and exhibit a strong tendency to form aggregates from crowding of a large number of carbonyl and amine groups, minimizing the HOMO-LUMO gap, showing an absorption peak at the visible region, and generating aggregation-induced emission.

Stimuli-responsive polymer/nanomaterial hybrids for sensing applications

Chemical and biological/biochemical sensors are capable of generating readout signals that are proportional to the concentration of specific analytes of interest. Signal sensitivity and limit of detection/quantitation can be enhanced through the use of polymers, nanomaterials, and their hybrids. Of particular interest are stimuli-responsive polymers and nanomaterials due to their ability to change their physical and/or chemical characteristics in response to their environment, and/or in the presence of molecular/biomolecular species of interest. Their individual use for sensing applications have many benefits, although this review focuses on the utility of stimuli-responsive polymer and nanomaterial hybrids. We discuss three main topics: stimuli-responsive nanogels, stimuli-responsive network polymers doped with nanomaterials, and nanoparticles modified with stimuli-responsive polymers.

A New Kind of Nonconventional Luminogen Based on Aliphatic Polyhydroxyurethane and Its Potential Application in Ink-Free Anticounterfeiting Printing

Organic luminogens have extensive applications due to their unique photophysical properties. In recent years, nonconjugated organic luminogens, in contrast to traditional conjugated luminogens, have gained much attention because of their facile preparation, environmental friendliness, and biocompatibility. In this study, a new kind of nonconventional luminogen based on dynamic covalent cross-linked polyhydroxyurethane is reported for the first time. The new luminogen not only exhibits intrinsic strong fluorescent emission in the solid state but also possesses high mechanical properties along with good shape memory and self-healing properties. In addition, the new luminogens are synthesized from aliphatic polyfunctional cyclic carbonate and amines via a much more straightforward method, avoiding the use of toxic isocyanates. Investigations indicated that the intrinsic luminescence of the resultant luminogens was induced by the cross-linking of polymer chains and could be well tuned by controlling the degree of cross-linking. By taking advantage of the unique characteristics of the resultant polymer luminogens, we further developed a facile method, named "light-mediated ink-free screen printing", for anticounterfeiting paper fabrication. Different from traditional ink-based printing technology, the new method used UV-light instead of expensive security ink to encode anticounterfeiting information on natural cellulose paper. The anticounterfeiting information is stable under various wet conditions, showing promising applications in the fast-growing counterfeiting of pharmaceuticals, packaging, and the food industry.

AIE-active non-conjugated poly(N-vinylcaprolactam) as a fluorescent thermometer for intracellular temperature imaging

Since temperature is one of the most significant physiological parameters that dictate the cellular status of living organisms, accurate intracellular temperature measurement is crucial and a valuable biomarker for the diagnosis and treatment of diseases. Herein, we introduce the foremost example of a non-conjugated polymer as a next generation fluorescent thermometer which is capable of addressing the key shortcomings including toxicity and thermal-induced fluorescence quenching associated with π-π conjugated system-based thermometers developed so far. We revealed, for the first time, the unique photophysical and aggregation-induced emission (AIE) characteristics of well-known thermoresponsive poly(N-vinylcaprolactam) (PNVCL) devoid of any classical fluorophore entity. PNVCL underwent a coil to globular conformational transition in an aqueous medium and appeared to be fluorescent above its lower critical solution temperature (LCST) near body temperature (38 °C). Eventually, this intriguing aspect enabled higher cellular uptake of PNVCL at the LCST boundary. By virtue of the AIE effect, the thermo-induced aggregation phenomenon has been ingeniously utilized to apply PNVCL as a novel fluorescent thermometer for intracellular temperature determination.

Recent advances in the development and applications of nonconventional luminescent polymers

Recently, nonconventional luminescent polymers (NLPs) have emerged as the most sought-after alternative luminescent materials. This review provides a thorough description of the importance and applications of each class of state-of-the-art NLPs.

AB-alternating copolymers via chain-growth polymerization: synthesis, characterization, self-assembly, and functions

In this review, four topics on alternating copolymers synthesized via chain-growth polymerization are reviewed: (1) how to control the alternating sequence; (2) sequence analysis; (3) self-assembly; and (4) functions.

Cloud Point Driven Dynamics in Aqueous Solutions of Thermoresponsive Copolymers: Are They Akin to Criticality Driven Solution Dynamics?

Cloud point driven interaction and relaxation dynamics of aqueous solutions of amphiphilic thermoresponsive copolymers were explored through picosecond resolved and steady state fluorescence measurements employing hydrophilic (coumarin 343, C343) and hydrophobic (coumarin 153, C153) solute probes of comparable sizes. These thermoresponsive random copolymers, with tunable cloud point temperatures (T_cp's) between 298 and 323 K, were rationally designed first and then synthesized via reversible addition-fragmentation chain transfer (RAFT) copolymerization of methyl methacrylate (MMA) and poly(ethylene glycol) monomethyl ether methacrylate (PEGMA). Subsequently, copolymers were characterized by NMR spectroscopy and size exclusion chromatography (SEC). A balance between the hydrophilic (PEGMA) and the hydrophobic (MMA) content dictates the critical aggregation concentration (CAC), with CAC ∼ 2-14 mg/L for these copolymers in aqueous media. No abrupt changes in the steady state spectral features of both C153 and C343 in the aqueous solutions of these polymers near but below the cloud point temperatures were observed. Interestingly, spectral properties of C153 in these solutions show the impact of hydrophobic/hydrophilic interaction balance but not by those of C343. More specifically, C153 reported a blue shift (relative to that in neat water) and heterogeneity in its local environment. This suggested different locations for the hydrophilic (C343) and the hydrophobic (C153) probes. In addition, the excited state fluorescence lifetime (⟨τ_life⟩) of C153 increased with the increase of hydrophobic (MMA) content in these copolymers. However, C343 reported no such variations, although fluorescence anisotropy decays for both solutes were significantly slowed down in these aqueous solutions compared to neat water. Anisotropy decays indicated bimodal time-dependent friction for these solutes in aqueous solutions of these copolymers but monomodal in neat water. A linear dependence of the average rotational relaxation rates (⟨k_rot⟩ = ⟨τ_rot⟩^-1) of the type ⟨k_rot⟩ ∝ (|T - T_cp|/T_cp)^γ with negative values for the exponent γ was observed for both solutes. No slowing down of the solute rotation with temperature approaching the T_cp was detected; rather, rotation became faster upon increasing the solution temperature, suggesting domination of the local friction.

Computational studies on the molecular insights of aptamer induced poly(N-isopropylacrylamide)-graft-graphene oxide for on/off- switchable whole-cell cancer diagnostics

This work deals with first-principles and in silico studies of graphene oxide-based whole-cell selective aptamers for cancer diagnostics utilising a tunable-surface strategy. Herein, graphene oxide (GO) was constructed as a surface-based model with poly(N-isopropylacrylamide) (PNIPAM) covalently grafted as an "on/off"-switch in triggering interactions with the cancer-cell protein around its lower critical solution temperature. The atomic building blocks of the aptamer and the PNIPAM adsorbed onto the GO was investigated at the density functional theory (DFT) level. The presence of the monomer of PNIPAM stabilised the system's π-π interaction between GO and its nucleobases as confirmed by higher bandgap energy, satisfying the eigenvalues of the single-point energy observed rather than the nucleobase and the GO complex independently. The unaltered geometrical structures of the surface emphasise the physisorption type interaction between the nucleobase and the GO/NIPAM surface. The docking result for the aptamer and the protein, highlighted the behavior of the PNIPAM-graft-GO  is exhibiting globular and extended conformations, further supported by molecular dynamics (MD) simulations. These studies enabled a better understanding of the thermal responsive behavior of the polymer-enhanced GO complex for whole-cell protein interactions through computational methods.

Terpolymers from Borane-Initiated Copolymerization of Triphenyl Arsonium and Sulfoxonium Ylides: An Unexpected Light Emission

The first synthesis of well-defined poly[(phenylmethylene-co-methylpropenylene)-b-methylene, [(C1-co-C3)-b-C1], terpolymers was achieved by one-pot borane-initiated random copolymerization of ω-methylallyl (C3 units, chain is growing by three carbon atoms at a time) and benzyltriphenylarsonium (C1 units, chain is growing by one carbon atom at a time) ylides, followed by polymerization of sulfoxonium methylide (C1 units). Other substituted arsonium ylides, such as prenyltriphenyl, propyltriphenyl and (4-fluorobenzyl)triphenyl can also be used instead of benzyltriphenylarsonium. The obtained terpolymers are well-defined, possess a predictable molecular weight and low polydispersity (Mn,NMR =1.83-9.68×103  g mol-1 , Đ=1.09-1.22). An unexpected light emission phenomenon was discovered in these non-conjugated terpolymers, as confirmed by fluorescence and NMR spectroscopy. This phenomenon can be explained by the isomerization of the double bonds of allylic monomeric units along the chain of the terpolymers (isomerization-induced light emission).

Design and synthesis of a dual imageable theranostic platinum prodrug for efficient cancer therapy

Platinum-based chemotherapeutic agents are considered first-line treatments for various cancers but their application is limited by the lack of site specificity and severe side effects.

Amino acid-derived alternating polyampholyte luminogens

A unique polyampholyte luminogen comprised of alternatively placed oppositely charged moieties onto the poly(styrene-alt-maleimide) skeleton was synthesized, and used for the specific detection of carbon disulfide (CS₂) in both solution and vapor phases.

Modulation of side chain crystallinity in alternating copolymers

A remarkable enhancement in crystalline melting temperature (T_m) was observed in a series of fatty acids and mPEG containing alternating copolymers with the lone increase in mPEG chain lengths.

Aromatic Nitrogen Mustard-Based Autofluorescent Amphiphilic Brush Copolymer as pH-Responsive Drug Delivery Vehicle

Delivery of clinically approved nonfluorescent drugs is facing challenges because it is difficult to monitor the intracellular drug delivery without incorporating any integrated fluorescence moiety into the drug carrier. The present investigation reports the synthesis of a pH-responsive autofluorescent polymeric nanoscaffold for the administration of nonfluorescent aromatic nitrogen mustard chlorambucil (CBL) drug into the cancer cells. Copolymerization of poly(ethylene glycol) (PEG) appended styrene and CBL conjugated N-substituted maleimide monomers enables the formation of well-defined luminescent alternating copolymer. These amphiphilic brush copolymers self-organized in aqueous medium into 25-68 nm nanoparticles, where the CBL drug is enclosed into the core of the self-assembled nanoparticles. In vitro studies revealed ∼70% drug was retained under physiological conditions at pH 7.4 and 37 °C. At endolysosomal pH 5.0, 90% of the CBL was released by the pH-induced cleavage of the aliphatic ester linkages connecting CBL to the maleimide unit. Although the nascent nanoparticle (without drug conjugation) is nontoxic, the drug conjugated nanoparticle showed higher toxicity and superior cell killing capability in cervical cancer (HeLa) cells rather than in normal cells. Interestingly, the copolymer without any conventional chromophore exhibited photoluminescence under UV light irradiation due to the presence of "through-space" π-π interaction between the C═O group of maleimide unit and the adjacent benzene ring of the styrenic monomer. This property helped us intracellular tracking of CBL conjugated autofluorescent nanocarriers through fluorescence microscope imaging. Finally, the 4-(4-nitrobenzyl)pyridine (NBP) colorimetric assay was executed to examine the ability of CBL-based polymeric nanomaterials toward alkylation of DNA.

Amino acid-derived stimuli-responsive polymers and their applications

The recent advances achieved in the study of various stimuli-responsive polymers derived from natural amino acids have been reviewed.

Radical Ring-Opening Copolymerization of Cyclic Ketene Acetals and Maleimides Affords Homogeneous Incorporation of Degradable Units

Radical copolymerization of donor-acceptor (D-A) monomer pairs has served as a versatile platform for the development of alternating copolymers. However, due to the use of conventional radical polymerization, the resulting copolymers have generally been limited to nondegradable vinyl polymers. By combining radical D-A copolymerization with radical ring-opening polymerization (rROP), we have synthesized an alternating copolymer with a high incorporation of degradable backbone units. Copolymerization of N-ethyl maleimide (NEtMI) with the cyclic ketene acetal (CKA) 2-methylene-4-phenyl-1,3-dioxolane (MPDL) was demonstrated to proceed in an alternating fashion, and controlled polymerization was achieved using reversible addition-fragmentation chain transfer (RAFT) polymerization. Spontaneous copolymerization, in the absence of an exogenous initiating source, occurred when the mixture of monomers was heated, presumably due to the large electron disparity between the comonomers. Chain-extension with styrene afforded well-defined P(MPDL-alt-NEtMI)-b-polystyrene copolymers, and degradation of the homopolymers and block copolymers showed complete breakdown of the alternating copolymer.

A nonconjugated macromolecular luminogen for speedy, selective and sensitive detection of picric acid in water

A conventional fluorophore-free water-soluble copolymer based on poly(styrene-alt-maleimide) has been found to be selective and sensitive detection of picric acid in a 100% aqueous environment with prompt response.