Biosorption of p-chloro meta xylenol (PCMX) by bacterium-encapsulated calcium alginate beads in a novel plug flow process

P-Chloro-Meta-Xylenol (PCMX) is a widely used disinfectant. In the current pandemic scenario, its consumption has increased largely, and as a result, wastewater is loaded heavily with PCMX as a contaminant. Remediation of this ecologically toxic phenolic compound is therefore a burning issue. This study proposes an eco-friendly biosorption-based remediation technique to remove PCMX. A novel isolated phenol-resistant gram-negative bacterium, Pandoraea sp. strain BT102, is first encapsulated in biopolymeric calcium alginate beads. These beads are packed in a long adsorption tube and the contaminated water was passed through this packed tube resembling a plug flow reactor. This unique plug-flow set-up is capable of reducing PCMX concentration from 100 mg L^-1 to 2.85 μg L^-1 within 4 h using only 30 g of adsorbent, resulting in 99.99% removal efficiency. Adsorption isotherms and kinetics are studied using batch experimental data. A PCMX loading capacity of the encapsulated calcium alginate beads is found to be 961.7 mg g^-1, and the Freundlich isotherm results suggested the phenomenon of cooperative adsorption. A good agreement of the pseudo-second-order kinetic model along with the intra-particle diffusion model suggests a multilayer diffusion-controlled adsorption process. Biosorption of PCMX by the bacterium-modified beads was confirmed by Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), and Fourier-Transform Infrared spectroscopy (FT-IR) analyses. The application of multivariate model-based Response Surface Methodology (RSM) reveals flow rate to be the most important factor controlling the rate of bioremediation.

Interference-free electrocatalysis of p-chloro meta xylenol (PCMX) on uniquely designed optimized polymeric nanohybrid of P(EDOT-co-OPD) and fMWCNT modified glassy carbon electrode

p-Chloro-meta-Xylenol (PCMX) is an environmentally hazardous phenolic compound having biocidal and antiseptic activity. Very few research publications addressed monitoring this contaminant. This paper presents a rapid sensing system to quantify it in waste water samples. The electrochemical activity of PCMX was exploited through a unique polymeric nanocomposite modified transducer for its quantification. Poly[(3,4-Ethylenedioxythiophene)-co-(o-phenylenediamine)] [P(EDOT-co-OPD)] was deposited through one-step electropolymerization technique on the glassy carbon electrode (GCE) modified by functionalized multi-wall carbon nanotubes (fMWCNTs). An optimized combination of these constituents was evaluated using response surface methodology (RSM) based Box-Behnken experimental design. This maximized the response for PCMX using differential pulse voltammetry (DPV). The sensing matrix was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The structural and morphological study of the modified film was conducted by Fourier transform-infrared spectroscopy (FT-IR), Raman spectroscopy, scanning electron microscopy (SEM), and field emission scanning electron microscope (FESEM). The anodic peak current could be read from a wide range of 0.5-225 μM calibration curve with a detection limit of 0.2545 μmol L^-1. Interestingly this work did not use any biomaterial in the modification but achieved interference-free response with excellent selectivity, sensitivity (0.4668 μA μM^-1 cm^-2), reproducibility (RSD = 2.2%), and repeatability. The sensing platform showed good stability (85.7%) of 3 months even after 150 times repetitive use. Its applicability for real samples was established by good correlation with standard methods.

Modelling of growth kinetics of isolated Pseudomonas sp. and optimisation of parameters for enhancement of xanthine oxidoreductase production by statistical design of experiments

This report presents the substrate inhibitory effect of xanthine (XN) on microbial growth and optimisation of effective parameters to achieve high enzyme activity of xanthine oxidoreductase (XOR) through statistical design. Three efficient isolated strains (Pseudomonas aeruginosa CEBP1 and CEBP2, Pseudomonas sp. CEB1G) were screened for growth kinetic studies. Substrate inhibitory models (eg. Aiba, Edward) could explain the growth kinetics of CEBP1, CEBP2 and CEB1G very well with various initial [XN] (S₀), e.g., 0.1-35 g L^-1. Highest XOR activity was obtained at stationary phase when biomass yield was high. Highest catalytic efficiency (k_cat/K_M) of XOR was obtained by CEBP1 at optimum specific growth rate of 0.082 h^-1 and biomass yield of 0.196 g g^-1 at S₀ = 5 g L^-1. The effects of S₀, pH and temperature were studied by Box-Behnken experimental design to evaluate the interactive effects of the significant variables influencing XOR production by CEBP1. ANOVA with high correlation coefficient (R² > 0.99) and lower 'Prob > F'value (< 0.05) validated the second order polynomial model for the enzyme production. The highest XOR activity of 31.2 KU min^-1mg^-1 was achieved by CEBP1 under optimised conditions (35 °C; S₀=5 g L^-1; pH = 7.0) as compared to any report in literature. A sevenfold substrate affinity of the enzyme was observed after purification.

Remediation of arsenic in mung bean (Vigna radiata) with growth enhancement by unique arsenic-resistant bacterium Acinetobacter lwoffii

Arsenic, a carcinogenic and toxic contaminant of soil and water, affects human health adversely. During last few decades, it has been an important global environmental issue. Among several arsenic detoxification methods remediation using arsenic resistant microbes is proved to be environment-friendly and cost-effective. This study aimed to test the effects of arsenic utilizing bacterial strain Acinetobacter lwoffii (RJB-2) on arsenic uptake and growth of mung bean plants (Vigna radiata). RJB-2 exhibited tolerance up to 125mM of arsenic (V) and 50mM of arsenic (III). RJB-2 produced plant growth promoting substances e.g. indole acetic acid (IAA), siderophores, exopolysaccharide (EPS) and phosphate solubilization in the absence and in presence of arsenic. Pot experiments were used to scrutinize the role of RJB-2 on arsenic uptake and growth of mung bean plants grown in soil amended with 22.5mgkg^-1 of sodium arsenate (Na₂HAsO₄·7H₂O). RJB-2 could arrest arsenic uptake in just 7days and increase plant growth, number of plants per pot, chlorophyll and carotenoid content of the mung bean plants. RJB-2 formed biofilm and its root-association helped to abate arsenic uptake in mung bean. Confocal and light microscopic studies also revealed the abatement of arsenic uptake and increase in chlorophyll content in mung bean plants in presence of RJB-2. RJB-2 was also responsible for less production of reactive oxygen species (ROS) in mung bean plants reducing the oxidative damage caused by arsenic. The lower percentage of electrolytic leakage (EL) in RJB-2 inoculated mung bean plants proved arsenic abatement. The study also reported the distribution of arsenic in various parts of mung bean plant. RJB-2 owing to its intrinsic abilities of plant growth promotion even in presence of high concentrations of arsenic could inhibit arsenic uptake completely and therefore it could be used in large-scale cultivation for phytostabilization of plants.

Statistical optimization of arsenic biosorption by microbial enzyme via Ca-alginate beads

Bioremediation of arsenic using green technology via microbial enzymes has attracted scientists due to its simplicity and cost effectiveness. Statistical optimization of arsenate bioremediation was conducted by the enzyme arsenate reductase extracted from arsenic tolerant bacterium Pseudomonas alcaligenes. Response surface methodology based on Box-Behnken design matrix was performed to determine the optimal operational conditions of a multivariable system and their interactive effects on the bioremediation process. The highest biosorptive activity of 96.2 µg gm^-1 of beads was achieved under optimized conditions (pH = 7.0; As (V) concentration = 1000 ppb; time = 2 h). SEM analysis showed the morphological changes on the surface of enzyme immobilized gluteraldehyde crosslinked Ca-alginate beads. The immobilized enzyme retained its activity for 8 cycles. ANOVA with a high correlation coefficient (R² > 0.99) and lower "Prob > F"value (<0.0001) corroborated the second-order polynomial model for the biosorption process. This study on the adsorptive removal of As (V) by enzyme-loaded biosorbent revealed a possible way of its application in large scale treatment of As (V)-contaminated water bodies.

Immobilization of Staphylococcus aureus Sortase A on Chitosan Particles and Its Applications in Peptide-to-Peptide Ligation and Peptide Cyclization

Chitosan macro-particles prepared by the neutralization method were applied to Sortase A (SrtA) immobilization using glutaraldehyde as a crosslinking agent. The particles were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Response surface methodology (RSM) was employed to optimize the immobilization process. An average specific activity of 3142 U (mg protein)^-1 was obtained under optimized immobilization conditions (chitosan concentration 3%, SrtA concentration 0.5 mg·mL^-1, glutaraldehyde concentration 0.5%, crosslinking and immobilization at 20 °C, crosslinking for 3 h, and an immobilization time of 8 h). The transpeptidase activity of immobilized SrtA was proved by a peptide-to-peptide ligation with a conversion yield approximately at 80%, and the immobilized catalyst was successfully reused for five cycles without obvious activity loss. Moreover, the scale-up capability of using immobilized SrtA to catalyze a head-to-tail peptide cyclization was investigated in a batch reaction and the conversion yield was more than 95% when using 20 mg of peptide as a substrate.