Chitosan-GPTMS-Silica Hybrid Mesoporous Aerogels for Bone Tissue Engineering

This study introduces a new synthesis route for obtaining homogeneous chitosan (CS)-silica hybrid aerogels with CS contents up to 10 wt%, using 3-glycidoxypropyl trimethoxysilane (GPTMS) as coupling agent, for tissue engineering applications. Aerogels were obtained using the sol-gel process followed by CO₂ supercritical drying, resulting in samples with bulk densities ranging from 0.17 g/cm³ to 0.38 g/cm³. The textural analysis by N₂-physisorption revealed an interconnected mesopore network with decreasing specific surface areas (1230-700 m²/g) and pore sizes (11.1-8.7 nm) by increasing GPTMS content (2-4 molar ratio GPTMS:CS monomer). In addition, samples exhibited extremely fast swelling by spontaneous capillary imbibition in PBS solution, presenting swelling capacities from 1.75 to 3.75. The formation of a covalent crosslinked hybrid structure was suggested by FTIR and confirmed by an increase of four hundred fold or more in the compressive strength up to 96 MPa. Instead, samples synthesized without GPTMS fractured at only 0.10-0.26 MPa, revealing a week structure consisted in interpenetrated polymer networks. The aerogels presented bioactivity in simulated body fluid (SBF), as confirmed by the in vitro formation of hydroxyapatite (HAp) layer with crystal size of approximately 2 µm size in diameter. In vitro studies revealed also non cytotoxic effect on HOB^® osteoblasts and also a mechanosensitive response. Additionally, control cells grown on glass developed scarce or no stress fibers, while cells grown on hybrid samples showed a significant (p < 0.05) increase in well-developed stress fibers and mature focal adhesion complexes.

Robust chemical bonding of PMMA microfluidic devices to porous PETE membranes for reliable cytotoxicity testing of drugs

Here, we report a simple yet reliable method for bonding poly(methyl methacrylate) (PMMA) to polyethylene terephthalate (PETE) track-etched membranes using (3-glycidyloxypropyl)trimethoxysilane (GLYMO), which enables reliable cytotoxicity tests in a microfluidic device impermeable to small molecules, such as anti-cancer drugs. The porous PETE membranes treated with 5% GLYMO were assembled with microfluidic channel-engraved PMMA substrates after air plasma treatment for 1 minute, followed by heating at 100 °C for 2 minutes, which permits irreversible and complete bonding to be achieved within 1 h. The bonding strength between the two substrates (1.97 × 10⁷ kg m^-2) was robust enough to flow culture medium through the device without leakage even at a gauge pressure of above 135 kPa. For validation of its utility in drugs testing, we successfully demonstrated that human lung adenocarcinoma cells cultured in the PMMA devices show more reliable cytotoxicity results for vincristine in comparison to conventional polydimethylsiloxane (PDMS) devices due to the inherent property of PMMA of it being impervious to small molecules. Given that the current organ-on-a-chip fabrication methods mostly rely on PDMS, this bonding strategy will expand simple fabrication capability using various thermoplastics and porous track-etched membranes, and allow us to create 3D-micro-constructs that more precisely mimic organ-level physiological conditions.

Interface Properties of Nanosilica-Modified Waterborne Epoxy Cement Repairing System

Nowadays, numerous concrete structures are urgently needed to be repaired and strengthened for the severe safety and durability of constructions. In this study, a novel type of silane-based interfacial coupling agent (ICA) is prepared by modifying the silane coupling agent (SCA) with a hydrothermally treated nanosilica (HTNS). The effect of ICA on the cement hydration and crystalline form as well as the hydrolysis/condensation extent of siloxanes is illustrated. The bonding strength, morphology and propagation of the interface cracks, and the interfacial ductile fracture characterization are investigated. Besides, the coupling mechanism of ICA in the repaired interface is explored. The results show that HTNS effectively catalyzes SCA hydrolysis and condensation to form Si-O-Si bonding in a neutral environment. The application of ICA on an old cementitious matrix not only significantly improves the bonding strength and toughness of the repair interface, but also mitigates the negative effect of dealcoholization of siloxanes on the hydration of the cement. The repaired interface simultaneously exhibits stiffness, toughness, and multicracking features in the process of straining. On a microlevel, ICA consumes portlandite during cement hydration and finely crystallizes to form a layered plug structure at the repaired interface . With the continuous dissolution of portlandite, the nanosilica in ICA forms a fibrous, stable product with ions and enhances the interfacial pore plug effect.

Biodegradable inorganic-organic hybrids of methacrylate star polymers for bone regeneration

Hybrids that are molecular scale co-networks of organic and inorganic components are promising biomaterials, improving the brittleness of bioactive glass and the strength of polymers. Methacrylate polymers have high potential as the organic source for hybrids since they can be produced, through controlled polymerization, with sophisticated polymer architectures that can bond to silicate networks. Previous studies showed the mechanical properties of hybrids can be modified by polymer architecture and molar mass (MM). However, biodegradability is critical if hybrids are to be used as tissue engineering scaffolds, since the templates must be remodelled by host tissue. Degradation by-products have to either completely biodegrade or be excreted by the kidneys. Enzyme, or bio-degradation is preferred to hydrolysis by water uptake as it is expected to give a more controlled degradation rate. Here, branched and star shaped poly(methyl methacrylate-co-3-(trimethoxysilyl)propyl methacrylate) (poly(MMA-co-TMSPMA)) were synthesized with disulphide based dimethacrylate (DSDMA) as a biodegradable branching agent. Biodegradability was confirmed by exposing the copolymers to glutathione, a tripeptide which is known to cleave disulphide bonds. Cleaved parts of the star polymer from the hybrid system were detected after 2weeks of immersion in glutathione solution, and MM was under threshold of kidney filtration. The presence of the branching agent did not reduce the mechanical properties of the hybrids and bone progenitor cells attached on the hybrids in vitro. Incorporation of the DSDMA branching agent has opened more possibilities to design biodegradable methacrylate polymer based hybrids for regenerative medicine.

STATEMENT OF SIGNIFICANCE

Bioactive glasses can regenerate bone but are brittle. Hybrids can overcome this problem as intimate interactions between glass and polymer creates synergetic properties. Implants have previously been made with synthetic polymers that degrade by water, however, they degrade catastrophically, causing rapid loss of strength. Polymers that degrade by biological agents may degrade at a more controlled rate, which should give time for tissue repair and transfer of load. Previously, hybrids made with star shaped poly(methyl methacrylate-co-3-(trimethoxysilyl)propyl methacrylate) (p(MMA-co-TMSPMA)) showed enhanced properties. However, methacrylates are not bio-degradable. Here, star shaped p(MMA-co-TMSPMA) was synthesized with a core that can be cleaved by glutathione, a tripeptide. On exposure to glutathione, the hybrid degraded, producing products with molecular weights below the kidney filtration threshold.

Functionalizing natural polymers with alkoxysilane coupling agents: reacting 3-glycidoxypropyl trimethoxysilane with poly(γ-glutamic acid) and gelatin

Functionalisation of polymers using organosilanesvianucleophilic attack of the epoxide rings is successful under mild pH when the polymers contain carboxylic groups.