Substituent Effects on the Ultraviolet Absorption Properties of 2,4-Dihydroxy Dibenzophenone

Substituent effects on the ultraviolet absorption properties of 2,4-dihydroxy dibenzophenone were investigated experimentally. Nine compounds of 2,4-dihydroxy dibenzophenone with different substituents were prepared by a solvent-free reaction of benzoyl chloride. The maximum absorption wavelength (λ_max) of these samples was measured, and their UV resistance properties in cotton fabric as well as in polyester were determined. The results show that the λ_max is dependent on the substituents at the benzylidene ring, and both electron donating substituents and electron withdrawing substituents cause a bathochromic shift. The UV resistance of fabric increases with the increase in compound concentration. The dyeing rate of each compound on polyester was higher than that of cotton. On cotton fabric, the dyeing rate of 2,4-dihydroxybenzophenone was the highest, 77.8%. On polyester, that of 2,4-dihydroxy-4'-ethyl dibenzophenone was the highest, 84.1%. The study provides new insights into the effect of substituents on the properties of 2,4-dihydroxy dibenzophenone that are related to the whitening of cotton and polyester materials.

An Overview of Functionalized Graphene Nanomaterials for Advanced Applications

Interest in the development of graphene-based materials for advanced applications is growing, because of the unique features of such nanomaterials and, above all, of their outstanding versatility, which enables several functionalization pathways that lead to materials with extremely tunable properties and architectures. This review is focused on the careful examination of relationships between synthetic approaches currently used to derivatize graphene, main properties achieved, and target applications proposed. Use of functionalized graphene nanomaterials in six engineering areas (materials with enhanced mechanical and thermal performance, energy, sensors, biomedical, water treatment, and catalysis) was critically reviewed, pointing out the latest advances and potential challenges associated with the application of such materials, with a major focus on the effect that the physicochemical features imparted by functionalization routes exert on the achievement of ultimate properties capable of satisfying or even improving the current demand in each field. Finally, current limitations in terms of basic scientific knowledge and nanotechnology were highlighted, along with the potential future directions towards the full exploitation of such fascinating nanomaterials.

Substituent effects on the ultraviolet absorption properties of stilbene compounds-Models for molecular cores of absorbents

The effects of substituent X and Y on ultraviolet (UV) absorption properties of stilbene compounds XPhCHCHPhY (XSBY) were studied both experimentally and computationally from the viewpoint of UV maximum absorption wavelength (λ_max) and the corresponding energy (υ_max). In the studies, the contribution of substituents on υ_max shift was explored. The results show that with increase of electron withdrawing or electron donating ability of X or Y, there is an enhanced electron delocalization of XSBY that leads to bathochromic shift. Computational analyses based on density functional theory were conducted to elucidate the phenomena. It is disclosed that the υ_max values are significantly affected by the excited state, though the electronic effect of ground state cannot be ignored. Finally, on the basis of the respective influences of X and Y, a quantitative model, which was proved reliable by the leave-one-out method, was developed to scale the effects of terminal substituents on υ_max. According to the model, the effects of substituents X or Y exhibit almost the same action on υ_max owing to the symmetric skeleton of the XSBY compounds. The findings provide deep insight into the effects of terminal substituents on UV absorption properties of stilbene compounds, and the derived model enables practical expression of the relationship between substituents and UV absorption.

Facile preparation of degradable multi-arm-star-branched waterborne polyurethane with bio-based tannic acid

In this research, biodegradable multi-arm-star-branched waterborne polyurethanes (MWPUs) were prepared by incorporation of bio-based material (tannic acid, TA) in the structure of waterborne polyurethanes. The prepared MWPUs were characterized by UV-vis spectrometry and FT-IR spectrometry, confirming the presence of TA in MWPUs. The results of DSC and TGA demonstrated that the incorporation of TA remarkably enhanced the thermal stability of MWPUs. The mechanical strength test indicated that the Young's modulus and tensile strength of the waterborne polyurethanes after incorporation of TA were significantly improved due to the increase of structural rigidity, hydrogen bonding and the molecular interactions of the TA-based MWPU chains. In addition, the synthesized TA-based MWPUs also exhibited excellent antioxidation capacity and outstanding biodegradation property. Given these excellent properties and the sustainability of TA, the developed TA-based MWPUs exhibited great potential in a wide range of practical applications.

Synthesis and characterization of fluorinated polyurethane containing carborane in the main chain: Thermal, mechanical and chemical resistance properties

In this study, two fluorinated polyurethanes (FPU) containing carborane groups in the main chains were firstly designed and synthesized via the reaction of hexamethylene diisocyanate trimer (HDI trimer) with fluorinated polyesters (CFPETs) having hydroxyl-terminated carborane groups at room temperature. The structures of carborane fluorinated polyesters (CFPETs) and polyurethanes (CFPUs) were characterized by gel permeation chromatography (GPC), Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance (NMR) measurements. The thermal stability, mechanical properties, Shore A hardness, solvent resistance and acid-alkali resistance of the carborane fluorinated polyurethane films were also studied. Thermogravimetric analysis (TGA) tests manifested that the introduction of carborane groups into the main chain of fluorinated polyurethane endowed the obtained fluorinated polyurethane with excellent thermal stability. The thermal decomposition temperature of carborane fluorinated polyurethane (CFPU) increased by 190 °C compared with that of the carborane-free fluorinated polyurethane (FPU). Even at 800 °C, CFPU showed the char yield of 66.5%, which was higher than that of FPU (34.3%). The carborane-containing fluorinated polyurethanes also showed excellent chemical resistance and prominent mechanical property even after the cured films being immersed into Jet aircraft oil or 37% HCl for 168 h or at high temperature (700 °C). It is found that the structural characteristics of carborane group and the compacted structure of CFPU effectively improve the thermal stability, mechanical property, solvent resistance and acid-alkali resistance of the carborane-free fluorinated polyurethane. These excellent properties make CFPU as the useful raw materials to prepare the high temperature resistant coatings or adhesives for automotive engines, engine or fuel tank of aircraft and other equipment working in high-temperature or high concentrations of acid-alkali environments.

Biocompatible, degradable thermoplastic polyurethane based on polycaprolactone-block-polytetrahydrofuran-block-polycaprolactone copolymers for soft tissue engineering

Biodegradable synthetic polymers have been widely used as tissue engineering scaffold materials. Even though they have shown excellent biocompatibility, they have failed to resemble the low stiffness and high elasticity of soft tissues because of the presence of massive rigid ester bonds. Herein, we synthesized a new thermoplastic polyurethane elastomer (CTC-PU(BET)) using poly ester ether triblock copolymer (polycaprolactone-block-polytetrahydrofuran-block-polycaprolactone triblock copolymer, PCTC) as the soft segment, aliphatic diisocyanate (hexamethylene diisocyanate, HDI) as the hard segment, and degradable diol (bis(2-hydroxyethyl) terephthalate, BET) as the chain extender. PCTC inhibited crystallization and reduced the melting temperature of CTC-PU(BET), and BET dramatically enhanced the thermal decomposition and hydrolytic degradation rate when compared with conventional polyester-based biodegradable TPUs. The CTC-PU(BET) synthesized in this study possessed a low tensile modulus and tensile strength of 2.2 MPa and 1.3 MPa, respectively, and an elongation-at-break over 700%. Meanwhile, it maintained a 95.3% recovery rate and 90% resilience over ten cycles of loading and unloading. In addition, the TPU could be electrospun into both random and aligned fibrous scaffolds consisting of major microfibers and nanobranches. 3T3 fibroblast cell culture confirmed that these scaffolds outperformed the conventional biodegradable TPU scaffolds in terms of substrate-cellular interactions and cell proliferation. Considering the advantages of this TPU, such as ease of synthesis, low cost, low stiffness, high elasticity, controllable degradation rate, ease of processability, and excellent biocompatibility, it has great prospects to be used as a tissue engineering scaffold material for soft tissue regeneration.

Fluorinated polyurethane based on liquid fluorine elastomer (LFH) synthesis via two-step method: the critical value of thermal resistance and mechanical properties

FPU gains optimal thermal stability and mechanical property when a novel soft segment-LFH increases to critical value (18 wt%), even if the cured films being immersed into hot water and oil.