Base-Directed Formation of Isostructural Lanthanide-Sulfate-Glutarate Coordination Polymers with Photoluminescence

A series of five isostructural 3D lanthanide-based coordination polymers [LnIII2(H2O)6(glu)(SO4)2]n [Ln = Pr(1), Nd(2), Sm(3), Eu(4), and Gd(5)] was effortlessly obtained within a few minutes via the microwave-heating method. The employment of auxiliary bases, that is, sodium hydroxide, 4,4'-bipyridine, and 1,4-diazabicyclo[2.2.2]octane, led to the formation of the title complex, whereas base-free synthesis yielded a three-dimensional inorganic coordination polymer, [Ln2(H2O)4(SO4)3]n·nH2O, Ln = Nd (2a). The robustness of the synthetic method was illustrated as both microwave-heating and conventional hydrothermal techniques also enabled the formation of a high-crystalline phase-pure complex 1-5. In the structure of 1-5, glutarato (glu2-) and sulfato ligands link dinuclear Ln(III) building units into three-dimensional frames. The glu2- ligands act as tethering linkers, expanding the structure into a neutral 3D coordination network. Hydrogen bonds were found to be the predominant intermolecular interactions in the crystal structures. Photoluminescence of the complex 1-5 was studied.

A Luminescent Cu(II)-MOF with Lewis Basic Schiff Base Sites for the Highly Selective and Sensitive Detection of Fe3+ Ions and Nitrobenzene

A Schiff base functionalized Cu(II)-based metal-organic framework (MOF) denoted as Cu-L, was developed via a solvothermal method using low-cost starting material, i.e., Schiff base linker, 4,4'-(hydrazine-1,2-diylidenedimethylylidene)dibenzoic acid (L). Good crystallinity and thermal stability of synthesized Cu-L was confirmed by the crystallographic and thermogravimetric studies. An excellent photoluminescent properties of Cu-L ensure their suitability for the ultrafast detection of Fe³⁺ ions and nitrobenzene via a turn-off quenching response. The remarkable sensitivity of Cu-L towards Fe³⁺ ions and nitrobenzene was certified by the low limit of detection (LOD) of 47 ppb and 0.004 ppm, respectively. With incorporated free azine groups, this MOF could selectively capture Fe³⁺ ions and nitrobenzene in aqueous solution. The plausible mechanistic pathway for the quenching in the fluorescence intensity of the Cu-L in the presence of Fe³⁺ ions and nitrobenzene have been explained in detail through the density functional theory calculations, photo-induced electron transfer (PET), fluorescence resonance energy transfer (FRET), and competitive energy adsorption. This present study open a new avenue to synthesize novel crystalline MOF-based sensing materials from cheap Schiff base linkers for fast sensing of toxic pollutants.

A new visual and stable fluorescent Cu-MOF as a dual-function sensor for glyphosate and Cr2O72−

A new visual and stable Cu-MOF as a dual-function sensor with high sensitivity for the detection of glyphosate and Cr2O72−.

Crystal Structures, Thermal and Luminescent Properties of Gadolinium(III) Trans-1,4-cyclohexanedicarboxylate Metal-Organic Frameworks

Four new gadolinium(III) metal-organic frameworks containing 2,2′-bipyridyl (bpy) or 1,10-phenanthroline (phen) chelate ligands and trans-1,4-cyclohexanedicarboxylate (chdc2−) were synthesized. Their crystal structures were determined by single-crystal X-ray diffraction analysis. All four coordination frameworks are based on the binuclear carboxylate building units. In the compounds [Gd2(bpy)2(chdc)3]·H2O (1) and [Gd2(phen)2(chdc)3]·0.5DMF (2), the six-connected {Ln2(L)2(OOCR)6} blocks form a 3D network with the primitive cubic (pcu) topology. In the compounds [Gd2(NO3)2(phen)2(chdc)2]·2DMF (3) and [Gd2Cl2(phen)2(chdc)2]·0.3DMF·2.2dioxane (4), the four-connected {Ln2(L)2(X)2OOCR)4} units (where X = NO3− for 3 or Cl− for 4) form a 2D square-grid (sql) network. The solid-state luminescent properties were investigated for the synthesized frameworks. Bpy-containing compound 1 shows no luminescence, possibly due to the paramagnetic quenching by Gd3+ cation. In contrast, the phenathroline-containing MOFs 2–4 possess yellow emission under visible excitation (λex = 460 nm) with the tuning of the characteristic wavelength by the coordination environment of the metal center.

Recent progress in the development of MOF-based optical sensors for Fe3

Fe(iii) is a common pollutant released into our ecosystem from various industrial and anthropogenic activities which when in excess interferes with human health. A plethora of sensors based on various designs and working principles are being continuously synthesized and improvised for its facile detection. In the present review, we have provided a brief overview of the developments made in the field of metal organic framework (MOF) based optical sensors for Fe3+. MOFs have exponentially emerged in the field of research due to their high porosity, modular construction and easy tunability. These inorganic-organic hybrid porous materials are being essentially promoted as optical sensors because of their unique photophysical properties and potential sensing applications.

Response of a Zn(II)-based metal-organic coordination polymer towards trivalent metal ions (Al3+, Fe3+ and Cr3+) probed by spectroscopic methods

A new zinc-based two-dimensional coordination polymer, [Zn(5-AIP)(Ald-4)]·H2O (5-AIP = 5-amino isophthalate, Ald-4 = aldrithiol-4), 1, has been synthesized at room temperature by the layer diffusion technique. Single-crystal X-ray diffraction analysis of 1 showed a two-dimensional bilayer structure. An aqueous suspension of 1 upon excitation at 300 nm displayed an intense blue emission at 403 nm. The luminescence spectra were interestingly responsive and selective to Al3+, Cr3+ and Fe3+ ions even in the presence of other interfering ions. The calculated detection limits for Al3+, Cr3+ and Fe3+ were 0.35 μM ([triple bond, length as m-dash]8.43 ppb), 0.46 μM ([triple bond, length as m-dash]22.6 ppb) and 0.30 μM ([triple bond, length as m-dash]15.85 ppb), respectively. Notably, with the cumulative addition of Al3+ ions, the luminescence intensity at 403 nm decreased steadily with a gradual red shift up to 427 nm. Afterward, this red shifted peak showed a turn-on effect upon further addition of Al3+ ions. On the other hand, for Cr3+ and Fe3+ ions, there was only drastic luminescence quenching and a large red shift up to 434 nm. This indicated the formation of a complex between 1 and these metal ions, which was also supported by the UV-Visible absorption spectra of 1 that showed the appearance of a new band at 280 nm in the presence of these three metal ions. The FTIR spectra revealed that these ions interacted with the carboxylate oxygen atom of 5-AIP and the nitrogen atom of the Ald-4 ligand in the structure. The luminescence lifetime decay analysis manifested that a charge-transfer type complex was formed between 1 and Cr3+ and Fe3+ ions that resulted in huge luminescence quenching due to the efficient charge transfer involving the vacant d-orbitals, whereas for Al3+ ions having no vacant d-orbital, turn-on of luminescence occurred because of the increased rigidity of 1 upon complexation.

A water stable Eu(III)-organic framework as a recyclable multi-responsive luminescent sensor for efficient detection of p-aminophenol in simulated urine, and MnVII and CrVI anions in aqueous solutions

A novel 3D Eu(iii) metal-organic framework (Eu-MOF-1) formulated as [Eu(L)(H2O)(DMA)] (L = 2-(2-nitro-4-carboxylphenyl)terephthalic acid) has been successfully synthesized under solvothermal conditions and characterized by structural analyses. Eu-MOF-1 displays a new 3D framework containing EuIII ions, ligand L, and coordinated DMA molecules and water molecules. The fluorescence investigations indicate that Eu-MOF-1 emits bright red luminescence, and shows relatively high water stability and outstanding chemical stability under a relatively wide range of pH conditions. It is noteworthy that Eu-MOF-1 can quantitatively detect p-aminophenol (PAP) which is a metabolite of phenylamine in human urine. More significantly, Eu-MOF-1 is the first reported multi-responsive luminescent sensor for detecting the biomarker PAP, and MnVII and CrVI anions with high selectivity, sensitivity, recyclability and relatively low detection limits in aqueous solutions. Furthermore, the possible sensing mechanisms of Eu-MOF-1 for selective sensing have also been explored in detail. Eu-MOF-1 could be an ideal candidate as a multi-responsive luminescent sensor in biological and environmental areas.

A Photoluminescent Cd(II) Coordination Polymer with Potential Active Sites Exhibiting Multiresponsive Fluorescence Sensing for Trace Amounts of NACs and Fe3+ and Al3+ Ions

The elaborately designed π-electron-rich fluorescent ligand 1,4-bis(1-carboxymethylene-4-imidazolyl)benzene (H₂L), possessing bifunctional groups including the carboxylate groups (building units) and 4-imidazoyl groups (N-donor potential active sites) has been employed to construct fluorescent coordination polymers. A luminescent sensor, namely [Cd(L)(phen)₂]·5H₂O (1), was obtained, which has a one-dimensional structure. The fluorescent material shows a blue emission maximum at 457 nm with a luminescence lifetime of 488 ns and a quantum yield (QY) of 4.56%. Significantly, 1 serves as a promising multiresponsive luminescent sensor to detect trace nitroaromatic compounds (NACs) with the limits of detection (LOD) of 7.21 × 10^-8, 1.85 × 10^-5, and 1.15 × 10^-5 mol/L for 2-nitrophenol (2-NP), 3-nitrophenol (3-NP), and 4-nitrophenol (4-NP), respectively. Furthermore, CP 1 exhibits fluorescent turn-off and turn-on sensing behavior for Fe³⁺ and Al³⁺ metal ions with trace amounts of 1.05 × 10^-7 and 1.13 × 10^-7 mol/L, respectively. Experimental methods and theoretical calculations were employed to elucidate the sensing mechanism in detail.

The construction of a novel luminescent lanthanide framework for the selective sensing of Cu2+ and 4-nitrophenol in water

It is challenging to develop highly stable lanthanide luminescent sensors for detecting heavy metal ions and nitroaromatics in view of the human health and environmental security. To this end, two water stable Ln-MOFs with the chemical constitution of {[Ln(HL)]·3DMF·3H2O}n (Ln = Eu, LZG-Eu and Ln = Tb, LZG-Tb) have been developed solvothermally using a multidentate ligand (H4L) with the central phenyl backbone bisubstituted by 2,6-pyridine-dicarboxylic acid at the para-position, H4L = 1,4-bis(2',2'',6',6''-tetracarboxy-1,4':4,4''-pyridyl)benzene. Single crystal analysis demonstrates that two novel Ln-MOFs feature 4,4,4-connected nets with an unprecedented topology symbol of {42·6·83}2{42·62·82}{42·84} and contain two kinds of one-dimensional channels. Powder X-ray diffraction as well as the luminescence determination results indicate that they retain their crystallinity and structural integrity in harsh acidic and basic conditions with pH in the range of 4-11. Moreover, they are highly luminescent, which makes them excellent chemical sensors for detecting Cu2+ and 4-NP (4-nitrophenol) with high selectivity and sensitivity in aqueous media such as deionized water, tap water, and river water based on distinct quenching effects. To the best of our knowledge, their detection limits are lower than those documented so far. In addition, the quenching efficiency of 4-NP was retained in the presence of interfering ions even after the compounds were used for five cycles, which makes them attractive, reliable, visual, and recyclable luminescent Ln-MOF sensor materials for 4-NP. The recognition mechanism for Cu2+ could be attributed to the dissociation of the main framework induced by Cu2+ and the subsequent formation of a Cu2+ coordination species and that for 4-NP is considered to be multi-quenching mechanisms dominated by competition absorption.

Visible-light-responsive lanthanide coordination polymers for highly efficient photocatalytic aerobic oxidation of amines and thiols

Photoinduced activation of oxygen by visible-light-responsive CPs via electron/energy transfer and its roles on aerobic oxidation of amines and thiols.

1D ladder and 2D bilayer coordination polymers constructed from a new T-shaped ligand: luminescence, magnetic and CO2 gas adsorption properties

1D ladder and 2D bilayer coordination polymers are constructed by using a new T-shaped ligand, in which the 2D bilayer exhibits CO₂ gas adsorption features.

Recyclable Magnetic Cu/CuFe2O4 Nanocomposites for the Rapid Degradation of 4-NP

Magnetic Cu/CuFe2O4 nanocomposites were prepared by the one-pot thermal decomposition of acetylacetone compounds. Adjusting the molar ratios of Fe to Cu was used to control the content of Cu in the synthetic process. XRD, TEM, XPS and UV-Vis were employed to reveal detailed structural and catalytic activities of Cu/CuFe2O4 nanocomposites. Magnetic measurements demonstrated that Cu/CuFe2O4 nanocomposites possessed a considerable magnetic saturation. Cu/CuFe2O4 nanocomposites showed superb efficiency in the degradation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). 4-NP could be reduced by Cu/CuFe2O4 nanocomposites within 40 s in the attendance of NaBH4. Cu nanocrystals played an indispensable rose in the enhancement of catalytic performance. The synergistic effect of Cu and CuFe2O4 nanocrystals achieved the high-efficiency catalytic reduction for 4-NP. After six recycling experiments, the efficiency of Cu/CuFe2O4 nanocomposites was almost stable. Our work advances a straightforward strategy to synthesize efficient and recoverable Cu/CuFe2O4 nanocomposites, which has promising utilizations in the purifying of nitrophenolic contamination.

Dramatic luminescence signal from a Co(ii)-based metal–organic compound due to the construction of charge-transfer bands with Al3+ and Fe3+ ions in water: steady-state and time-resolved spectroscopic studies

A Co(ii)-based metal–organic compound exhibits luminescence turn-on by Al³⁺ and quenching by Fe³⁺ due to the formation of charge-transfer complexes/adducts.

A white-light-emitting lanthanide metal–organic framework for luminescence turn-off sensing of MnO4− and turn-on sensing of folic acid and construction of a “turn-on plus” system

A white-light-emitting lanthanide MOF shows recyclable and dual-responsive sensing for MnO₄⁻ and folic acid in an aqueous system with high selectivity and sensitivity.

Cobalt(ii) and zinc(ii)-coordination polymers constructed from ether-linked tetracarboxylic acid and isomeric bis(imidazole) linkers: luminescence-based Fe(iii) detection in aqueous media

Four Co(ii) and Zn(ii)-coordination polymers were synthesized and characterized. Compound 3 exhibited sensitive and selective detection towards Fe³⁺ ions in the presence of other competing agents with a detection limit of 3.23 ppm.

Multifunctional luminescent coordination polymers based on tricarboxylic acid for the detection of 2,4-dinitrophenol and iron(iii) and aluminum(iii) ions

2D Zn(ii)-coordination polymer exhibited highly sensitive and selective detection towards DNP, Fe³⁺ and Al³⁺ ions in the presence of other interfering compounds through luminescence quenching and enhancement, respectively.

Five new coordination polymers with a Y-shaped N-heterocyclic carboxylic acid: structural diversity, bifunctional luminescence sensing and magnetic properties

Five novel CPs have been synthesized under solvothermal conditions. The results show that 1 and 2 present high sensing ability for NACs and Fe³⁺ ions, and there exist ferromagnetic interaction in 3/4 and antiferromagnetic interaction in 5.

Zinc(ii)–organic framework as a multi-responsive photoluminescence sensor for efficient and recyclable detection of pesticide 2,6-dichloro-4-nitroaniline, Fe(iii) and Cr(vi)

A stable Zn-MOF acts as a multi-responsive luminescent sensor for efficient and recyclable detection of organochlorine pesticide 2,6-dichloro-4-nitroaniline, Fe(iii) and Cr(vi) with high selectivity and sensitivity.

A new quinoline based luminescent Zr(iv) metal-organic framework for the ultrasensitive recognition of 4-nitrophenol and Fe(iii) ions

A Zr(iv) based luminescent metal-organic framework (MOF; 1) was synthesized by a solvothermal method using a mixture of ZrCl4, quinoline-2,6-dicarboxylic acid (H2QDA) ligand and trifluoroacetic acid (modulator) having a 1 : 1 : 10 molar ratio in N,N-dimethylformamide (DMF). For activation, the methanol-exchanged sample was heated under high vacuum at 120 °C for 1 day. Different techniques like X-ray powder diffraction (XRPD), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy and energy dispersive X-ray (EDX) analysis were applied to fully characterize 1. The activated form of 1 (called 1') has the formula [Zr6O6(OH)2(CF3COO)2(C11H5NO4)4(H2O)4]. It exhibited quick response and great selectivity for the fluorimetric sensing of 4-nitrophenol (4-NP) in acetonitrile and Fe3+ ions in water. The probe maintained its high selectivity for 4-NP and Fe3+ ions even in the presence of potentially intrusive nitroaromatics and metal ions, respectively. The detection limits for 4-NP and Fe3+ were found to be 1.40 ppt and 0.71 ppb, respectively. These values are the lowest among the existing MOF probes for Fe3+ and 4-NP. The electron and energy transfer processes along with the electrostatic interactions of 4-NP with the MOF can be the possible reasons for the selectivity for 4-NP. The fluorescence resonance energy transfer (FRET) process can be the major reason behind the quenching mechanism for Fe3+ ions. The recyclability test indicates that 1' is a promising probe for the long-term detection of 4-NP and Fe3+ ions.

A water-stable lanthanide coordination polymer as a multiresponsive luminescent sensor for Fe3+, Cr(vi) and 4-nitrophenol

Constructing water stable lanthanide coordination polymers (Ln-CPs) is of great importance for practical applications in biological and environmental areas and necessary for systematic research on the relationship between the properties of Ln-CPs and structures of linker ligands. A two-dimensional (2D) Eu coordination polymer (Eu-CP) {[Eu(L)(HCOO)]·H2O}n (H2L = isomer of 5-((pyridin-3-yloxy)methyl)isophthalic acid) is synthesized by the reaction of Eu(NO3)3·6H2O and H2L and heating at 140 °C. Single crystal X-ray diffraction analysis indicates that the Eu-CP presents a 2D network structure formed by binuclear metal clusters and bridged linkers COO- and HCOO-. The luminescence properties of the Eu-CP are explored at room temperature in the solid-state. The Eu-CP emits bright and stable red light due to the antenna effect from the ligand to the metal ion. The characteristic emission peaks of Eu3+ can be observed in its spectra. The luminescence intensity of the Eu-CP can be sensitively quenched by inorganic ions Fe3+, CrO42-, and Cr2O72- and the organic molecule 4-nitrophenol (4-NP). The Eu-CP can be a multiresponsive luminescent sensor in the water phase. Solvent luminescence investigation and PXRD data demonstrate that the Eu-CP exhibits excellent water stability. Therefore, all the sensing experiments are carried out in the water system. This multi-responsive luminescent sensor can detect Fe3+, Cr(vi) or 4-NP with high sensitivity and low detection limits in aqueous solution. Furthermore, the mechanism for the selective sensing of Fe3+, Cr(vi) or 4-NP is also explored which can mainly be explained by energy competition between the absorption of the analytes and the excitation of the Eu-CP.

Isostructural lanthanide-based metal–organic frameworks: structure, photoluminescence and magnetic properties

Highly stable 3D Ln-MOFs were constructed. The Eu-MOF shows good luminescence properties while the Dy-MOF shows a typical single-molecule magnetic behavior with a slow relaxation of magnetization.

A versatile chemosensor for the detection of Al3+ and picric acid (PA) in aqueous solution

The selective detection of Al³⁺ and picric acid in water has been realized by means of a fluorescence spectroscopy-based chemosensor.

Two luminescent lanthanide–organic frameworks containing bithiophene groups for the selective detection of nitrobenzene and Fe3+

Two isostructural lanthanide–organic frameworks containing bithiophene groups can be used as fast-response fluorescent probes for the sensitive detection of nitrobenzene and Fe³⁺ ions through fluorescence quenching.

3D LnIII-MOFs: slow magnetic relaxation and highly sensitive luminescence detection of Fe3+ and ketones

Five Ln-MOFs were obtained: the Dy-MOF shows slow magnetic relaxation, and the Eu-MOF and Tb-MOF show selective and sensitive sensing towards Fe³⁺ ions and ketones in a water system.

Stable Zr(IV)-Based Metal-Organic Frameworks with Predesigned Functionalized Ligands for Highly Selective Detection of Fe(III) Ions in Water

Metal-organic frameworks are a class of attractive materials for fluorescent sensing. Improvement of hydrolytic stability, sensitivity, and selectivity of function is the key to advance application of fluorescent MOFs in aqueous media. In this work, two stable MOFs, [Zr₆O₄(OH)₈(H₂O)₄(L¹)₂] (BUT-14) and [Zr₆O₄(OH)₈(H₂O)₄(L²)₂] (BUT-15), were designed and synthesized for the detection of metal ions in water. Two new ligands utilized for construction of the MOFs, namely, 5',5‴-bis(4-carboxyphenyl)-[1,1':3',1″:4″,1‴:3‴,1''''-quinquephenyl]-4,4''''-dicarboxylate (L¹) and 4,4',4″,4‴-(4,4'-(1,4-phenylene)bis(pyridine-6,4,2-triyl))tetrabenzoate (L²), are structurally similar with the only difference being that the latter is functionalized by pyridine N atoms. The two MOFs are isostructural with a sqc-a topological framework structure, and highly porous with the Brunauer-Emmett-Teller (BET) surface areas of 3595 and 3590 m² g^-1, respectively. Interestingly, they show intense fluorescence in water, which can be solely quenched by trace amounts of Fe³⁺ ions. The detection limits toward the Fe³⁺ ions were calculated to be 212 and 16 ppb, respectively. The efficient fluorescent quenching effect is attributed to the photoinduced electron transfer between Fe³⁺ ions and the ligands in these MOFs. Moreover, the introduced pyridine N donors in the ligand of BUT-15 additionally donate their lone-pair electrons to the Fe³⁺ ions, leading to significantly enhanced detection ability. It is also demonstrated that BUT-15 exhibits an uncompromised performance for the detection of Fe³⁺ ions in a simulated biological system.

A supramolecular Tröger's base derived coordination zinc polymer for fluorescent sensing of phenolic-nitroaromatic explosives in water

A V-Shaped 4-amino-1,8-napthalimide derived tetracarboxylic acid linker (L; bis-[N-(1,3-benzenedicarboxylic acid)]-9,18-methano-1,8-naphthalimide-[b,f][1,5]diazocine) comprising the Tröger's base (TB) structural motif was rationally designed and synthesised to access a nitrogen-rich fluorescent supramolecular coordination polymer. By adopting the straight forward precipitation method, a new luminescent nanoscale Zn(ii) coordination polymer (TB-Zn-CP) was synthesized in quantitative yield using Zn(OAc)2·2H2O and tetraacid linker L (1 : 0.5) in DMF at room temperature. The phase-purity of as-synthesised TB-Zn-CP was confirmed by X-ray powder diffraction analysis, infra-red spectroscopy, and elemental analysis. Thermogravimetric analysis suggests that TB-Zn-CP is thermally stable up to 330 °C and the morphological features of TB-Zn-CP was analysed by SEM and AFM techniques. The N2 adsorption isotherm of thermally activated TB-Zn-CP at 77 K revealed a type-II reversible adsorption isotherm and the calculated Brunauer-Emmett-Teller (BET) surface area was found to be 72 m2 g-1. Furthermore, TB-Zn-CP displayed an excellent CO2 uptake capacity of 76 mg g-1 at 273 K and good adsorption selectivity for CO2 over N2 and H2. The aqueous suspension of as-synthesized TB-Zn-CP showed strong green fluorescence (λmax = 520 nm) characteristics due to the internal-charge transfer (ICT) transition and was used as a fluorescent sensor for the discriminative sensing of nitroaromatic explosives. The aqueous suspension of TB-Zn-CP showed the largest quenching responses with high selectivity for phenolic-nitroaromatics (4-NP, 2,4-DNP and PA) even in the concurrent presence of other potentially competing nitroaromatic analytes. The fluorescence titration studies also provide evidence that TB-Zn-CP detects picric acid as low as the parts per billion (26.3 ppb) range. Furthermore, the observed fluorescence quenching responses of TB-Zn-CP towards picric acid were highly reversible. The highly selective fluorescence quenching responses including the reversible detection efficiency make the nanoscale coordination polymer TB-Zn-CP a potential material for the discriminative fluorescent sensing of nitroaromatic explosives.

Five new 2D and 3D coordination polymers based on two new multifunctional pyridyl–tricarboxylate ligands: hydrothermal syntheses, structural diversity, luminescent and magnetic properties

Five new Zn(ii), Cd(ii), Co(ii) and Mn(ii) MOFs based on two novel multifunctional pyridyl–tricarboxylate ligands: structures, luminescent and magnetic properties.

Highly sensitive and selective fluorescent probe for Fe3+ and hazardous phenol compounds based on a water-stable Zn-based metal–organic framework in aqueous media

A novel metal–organic framework (MOF), specifically a Zn-MOF, exhibited excellent performance in highly sensitive and selective sensing of Fe³⁺ and hazardous phenol compounds.