A Novel and Sensitive Fluorescent Probe for Glyphosate Detection Based on Cu2+ Modulated Polydihydroxyphenylalanine Nanoparticles

A novel and sensitive fluorescent probe based on Cu²⁺-modulated polydihydroxyphenylalanine nanoparticles (PDOAs) has been developed for the detection of glyphosate pesticides. Compared to conventional instrumental analysis techniques, fluorometric methods have obtained good results in the field of agricultural residue detection. However, most of the fluorescent chemosensors reported still have some limitations, such as long response times, the high limit of detection, and complex synthetic procedures. In this paper, a novel and sensitive fluorescent probe based on Cu²⁺ modulated polydihydroxyphenylalanine nanoparticles (PDOAs) has been developed for the detection of glyphosate pesticides. The fluorescence of PDOAs can be effectively quenched by Cu²⁺ through the dynamic quenching process, which was confirmed by the time-resolved fluorescence lifetime analysis. In the presence of glyphosate, the fluorescence of the PDOAs-Cu²⁺ system can be effectively recovered due to the higher affinity of glyphosate for Cu²⁺, and thus released the individual PDOAs. Due to the admirable properties such as high selectivity to glyphosate pesticide, "turn on" fluorescence response, and ultralow detection limit of 1.8 nM, the proposed method has been successfully applied for the determination of glyphosate in environmental water samples.

Influence of Fe(III) on the Fluorescence of Lysozyme: a Facile and Direct Method for Sensitive and Selective Sensing of Fe(III)

Lysozyme is widely used for the synthesis of nanomaterials (e.g., gold nanoparticle) to fluorescently sense metal ions. However, the effect of metal ions on the fluorescence of lysozyme is not studied yet. Herein, we have explored the interactions of lysozyme with different metal ions to develop a direct sensing platform for Fe(III). It has been observed that the fluorescence of lysozyme was slightly decreased in the presence of Cu(II), Hg(II), As(V), Co(II), Cd(II), Cr(II), Fe(II), Mn(II), Pb(II), and Zn(II), while a significant decrease in the lysozyme fluorescence was observed for Fe(III). The effect of thermal stability on the fluorescence quenching was also studied from 25 to 60 °C. In the present study, the lysozyme sensing probe was able to selectively and accurately detect 0.5-50 ppm of Fe(III) with a LOD of 0.1 ppm (1.8 µM) at 25 °C.

Synthesis of New Quinoline-Conjugated Calixarene as a Fluorescent Sensor for Selective Determination of Cu2+ Ion

A novel quinoline-functionalized calix [4] arene derivative (Quin-Calix) has been successfully synthesized at partial cone conformation and duly characterized by using FTIR, ¹H-NMR, ¹³C-NMR, ESI-MS and elemental analysis techniques. Moreover, the cation-binding property of the calix [4] arene derivative (Quin-Calix) has been investigated towards Cu²⁺, Ba²⁺, Cd²⁺, Co²⁺, Ni²⁺, Zn²⁺ and Fe³⁺ ions, and the recognition event monitored by UV-Vis absorption and fluorescence studies. The results indicated that Quin-Calix displays a remarkable affinity and selectivity only for Cu²⁺ ion. The binding constant and stoichiometry of the complex formed between Quin-Calix and Cu²⁺ ion have been also calculated from the fluorescence data. In addition, Stern-Vohmer equation has been used to elucidate the mechanism of quenching.

Bipyridine- and Copper-Functionalized N-doped Carbon Dots for Fluorescence Turn Off-On Detection of Ciprofloxacin

Herein, a fluorescence turn off-on nanosensor has been successfully developed using functionalized N-doped carbon dots (N-CDs) as the label-free sensing probe for the ultrasensitive detection of Cu²⁺ ions first and then ciprofloxacin (CIP), one of the most commonly used antibiotics for disease control, in the presence of bipyridine. The homogeneous and narrowly distributed N-CDs with a mean size of 5.7 nm and a high quantum yield of 84% are fabricated via the hydrothermal method in the presence of citric acid and ethylenediamine as the carbon and nitrogen sources, respectively. The Cu²⁺ ions serve as both analyte and fluorescence quenchers in the sensing platform of N-CDs, and a good linear response to Cu²⁺ in the range of 0.01-0.35 μM with a limit of detection (LOD) of 0.076 nM is observed. Then, 0.35 μM Cu²⁺ is used as the fluorescence quencher of N-CDs to build up the fluorescence turn off-on sensing probe for the detection of CIP using bipyridine (bipy) as the linker for CIP and Cu²⁺ ions. The addition of CIP to the bipy-Cu@N-CD composites triggers the formation of CIP-bipy-Cu conjugate as well as the release of N-CDs, resulting in the recovery of fluorescence intensity after 6 min of incubation. The sensing probe exhibits a two-phase linear response to CIP in the concentration range of 0.05-1 and 1-50 μM with a LOD of 0.4 nM. In addition, the bipy-Cu@N-CD probe shows high sensitivity toward CIP over the 19 other interferences. Good recovery of 96-110% is also observed when 0.1-0.9 μM CIP is spiked into the real samples. Results obtained in this study clearly demonstrate a newly developed sensing platform with rapid detection of metal ions and antibiotics, which can open an avenue to develop highly efficient and robust sensing probes for the detection of metal ions, organic metabolites, and biomarkers in biological applications.

Simple C3-symmetric triaminoguanidine-triphenylamine conjugate as an efficient colorimetric sensor for Cu(II) and fluorescent sensor for Fe(III) ions

The design and construction of novel C₃-symmetric triaminoguanidine-triphenylamine conjugate (L) has been demonstrated and it displays positive solvatochromic behaviour with an increase in solvent polarity. The probe L acts as a selective colorimetric sensor for Cu²⁺ ions over other metal ions. Further, it shows high selective and sensitive detection of Fe³⁺ ions through turn-on fluorescence response. Moreover, the detection limits for Cu²⁺ and Fe³⁺ ions were found to be within the allowable range of the World Health Organisation (30 μM). The real-time application of the probe was showed by paper strip experiments as well as detection of Fe³⁺ ions in pharmaceutical tablets.

Two-component ratiometric sensor for Cu2+ detection on paper-based device

The copper(II) ion (Cu²⁺) has played an indispensable role in diverse kinds of functional physiological processes of organisms, which has become of growing interest. Despite the fact that numerous Cu²⁺ test papers using fluorescent probes have been fabricated, sensors featuring the ratiometric property that integrates quenched probes and an inner standard dye are rarely reported. Herein, a two-component ratiometric sensor in a paper-based device is proposed to realize highly selective Cu²⁺ detection. To overcome shortcomings such as low signal-to-noise ratio and incorrect response of the quenching probe, a novel BODIPY-based turn-off probe (P2017) is designed and introduced into the paper-based device with better water solubility and selectivity for Cu²⁺ detection. Furthermore, a reference dye (B001), exhibiting an emission at 690 nm when the excitation wavelength is 480 nm, is also introduced into the paper-based device. These two components can enhance the quality of the signal as P2017 is sensitively quenched by Cu²⁺, while B001 with a photostable property, serving as an internal benchmark, is unable to react with Cu²⁺. The results indicated that the two components provided a new concept for optimizing paper-based device fabrication and developing accurate, simple, and inexpensive Cu²⁺ detection methods, which could be potentially applied to monitor human health and the environment in remote areas. Graphical abstract.

Fabrication of cefotaxime sodium-functionalized gold nanoclusters for the detection of copper ions in Chinese herbal medicines

Antibiotic-based gold nanoclusters (AuNCs) are a good sensing platform for specific recognition; however, the related studies are few. Herein, a simple and facile strategy was proposed for the fabrication of bright blue fluorescent AuNCs through the degradation product (DCTX) of cefotaxime sodium that induced the reduction of HAuCl₄. Various analytical techniques were applied to characterize the prepared AuNCs@DCTX. AuNCs@DCTX exhibited a strong emission peak centered at 420 nm and a quantum yield of 11.8%. Furthermore, an aggregation-induced fluorescence quenching mode endowed the AuNCs@DCTX probe with good specificity and sensitivity for Cu²⁺ detection. The proposed probe had a linear range of 0.01–40 μM, a precision with a relative standard deviation of 1.2% (n = 8), and a detection limit of 8 nM (signal/noise = 3). Interestingly, the probe could be reused through switching the “off” and “on” states by the addition of Cu²⁺ and EDTA. The practicality of the sensing platform was investigated for the determination of Cu²⁺ in four Chinese herbal medicines (CHMs), and the results were in accordance with those obtained by the FAAS method. This study has provided an alternate way for the fabrication of thiolate-protected AuNCs for sensing applications.

Antibiotic-based gold nanoclusters (AuNCs) are a good sensing platform for specific recognition; however, the related studies are few.

Remarkable colorimetric sensing behavior of pyrazole-based chemosensor towards Cu(ii) ion detection: synthesis, characterization and theoretical investigations

We report the synthesis of a new imine based ligand, 3-((3-methoxybenzylidene)amino)-1H-pyrazol-5-ol (HL) and its Cu(ii) complexes in 2 : 1 (HL : metal) and 1 : 1 : 1 (HL : metal : HQ) stoichiometric ratio using 8-hydroxyquinoline (HQ) as an additional bidentate ligand. The synthesized ligand (HL) and its Cu(ii) complexes (1 and 2) are structurally characterized using FT-IR, electronic absorption and emission, NMR and MS techniques. Furthermore, the complexation of Cu2+ with HL leads to the immediate formation of brown colour solution which indicates that HL can act as simple colorimetric sensor for Cu2+ ions. We further investigated that the sensor could selectively bind to the Cu2+ ions even in the presence of competitive ions such as Mn2+, Fe2+, Co2+, Ni2+, Zn2+, Ag+ and Na+ ions in aqueous solutions which was studied by electronic absorption spectroscopy. The HL ligand has been investigated for its reactive properties by density functional theory (DFT) calculations. Quantum molecular descriptors describing local reactive properties have been calculated in order to identify the most reactive molecule sites of title compounds. DFT calculations encompassed molecular electrostatic potential (MEP), local average ionization energies (ALIE), Fukui functions and bond dissociation energies for hydrogen abstraction (H-BDE).

Visual and optical detection of hypochlorite in water samples based on etching of gold/silver alloy nanoparticles

In this work, we have described the cost-effective, simple, selective and sensitive approach for the detection of hypochlorite (ClO⁻) using gold/silver alloy nanoparticles (Au/Ag alloy NPs) as a colorimetric probe.