Spontaneous aggregation-enhanced electrochemiluminescence via galvanic strategy

Researchers unremittingly strive to develop innovative luminophores to enhance intrinsic electrochemiluminescence (ECL) performance. However, the potential to harness facile strategies, such as manipulating the physical properties of luminophores while retaining functional chemical properties to fabricate cost-effective ECL complexes, remains underexplored. Herein, we reported a novel and efficient one-step galvanic technique to actualize aggregation-enhanced ECL (AEECL) of ruthenium complexes. It marked the first instance of the galvanic process being employed to synthesize aggregate luminophores through electrostatic attraction. The ECL intensity and efficiency of the prepared ruthenium complexes with AEECL properties surpassed traditional ruthenium complexes by 8.9 and 13.6 times, respectively, outperforming most reported luminophores. Remarkably, the target luminophore exhibited high stability across varied scan rates and temperatures. Furthermore, a binder-free and carbon paper-based AEECL analytical device for lidocaine detection was fabricated, achieving a satisfactory detection limit (0.34 nM) and selectivity. The convenient modulation strategy of aggregate structure, along with the transformative leap from insufficient ECL to AEECL, bring forth a new revenue in aggregate science. This research also promises a universally applicable and versatile protocol for future biological analysis and bioimaging applications.

Development and Application of Ruthenium(II) and Iridium(III) Based Complexes for Anion Sensing

Improvements in the design of receptors for the detection and quantification of anions are desirable and ongoing in the field of anion chemistry, and remarkable progress has been made in this direction. In this regard, the development of luminescent chemosensors for sensing anions is an imperative and demanding sub-area in supramolecular chemistry. This decade, in particular, witnessed advancements in chemosensors based on ruthenium and iridium complexes for anion sensing by virtue of their modular synthesis and rich chemical and photophysical properties, such as visible excitation wavelength, high quantum efficiency, high luminescence intensity, long lifetimes of phosphorescence, and large Stokes shifts, etc. Thus, this review aims to summarize the recent advances in the development of ruthenium(II) and iridium(III)-based complexes for their application as luminescent chemosensors for anion sensing. In addition, the focus was devoted to designing aspects of polypyridyl complexes of these two transition metals with different recognition motifs, which upon interacting with different inorganic anions, produces desirable quantifiable outputs.

Synthesis and photobiological evaluation of Ru(II) complexes with expanded chelate polypyridyl ligands

Photoreactive Ru(II) complexes capable of ejecting ligands have been used extensively for photocaging applications and for the creation of "photocisplatin" reagents. The incorporation of distortion into the structure of the coordination complex lowers the energy of dissociative excited states, increasing the yield of the photosubstitution reaction. While steric clash between ligands induced by adding substituents at the coordinating face of the ligand has been extensively utilized, a lesser known, more subtle approach is to distort the coordination sphere by altering the chelate ring size. Here a systematic study was performed to alter metal-ligand bond lengths, angles, and to cause intraligand distortion by introducing a "linker" atom or group between two pyridine rings. The synthesis, photochemistry, and photobiology of five Ru(II) complexes containing CH₂, NH, O, and S-linked dipyridine ligands was investigated. All systems where stable in the dark, and three of the five were photochemically active in buffer. While a clear periodic trend was not observed, this study lays the foundation for the creation of photoactive systems utilizing an alternative type of distortion to facilitate photosubstitution reactions.

Colorimetric fluoride detection in dimethyl sulfoxide using a heteroleptic ruthenium(ii) complex with amino and amide groups: X-ray crystallographic and spectroscopic analyses

A bis-heteroleptic ruthenium(ii) complex, [Ru(Hdpa)2(H2pia)]X2 (1·X2; X = Cl, OTf, or F; Hdpa = di-2-pyridylamine; H2pia = 2-pycolinamide; OTf- = CF3SO3 -), was synthesized and spectroscopically and crystallographically characterized. The crystal structures of 1·Cl2·2.5H2O and 1·F2·2EtOH revealed essentially identical geometries for the 12+ dication; however, the dihedral angle between the two pyridyl groups in the Hdpa ligands, which represented the degree of bending of the bent conformation, was affected by hydrogen-bonding interactions between the NH group and counterions. In 1·F2·2EtOH, one of the Hdpa ligands had an unusually smaller dihedral angle (15.8°) than the others (29.9°-35.0°). The two NH groups of each Hdpa ligand and the NH2 group of the H2pia ligand in 12+ acted as receptors for F- anion recognition via hydrogen-bonding interactions in a dimethyl sulfoxide (DMSO) solution, and the reaction showed an unambiguous color change in the visible region. Upon the addition of tetra-n-butylammonium fluoride to the red DMSO solution of 1·(OTf)2·H2O, the solution turned dark brown. 1H NMR analysis and absorption spectroscopy of the reaction between 12+ and the added F- anions revealed that the F- anions did not distinguish between the two amino groups of Hdpa and the amide group of H2pia, although they were in different environments in the DMSO solution. A tris-F-adduct with 12+, 1·F3 -, was formed when sufficient F- anions were present in the solution, despite the presence of four NH protons in 12+. Time-dependent DFT calculations of 12+ and 1·F3 - were consistent with their absorption spectra.

Curcumin Is an Iconic Ligand for Detecting Environmental Pollutants

The rapid increase in industrial revolution and the consequent environmental contamination demands continuous monitoring and sensitive detection of the pollutants. Nanomaterial-based sensing system has proved to be proficient in sensing environmental pollutants. The development of novel ligands for enhancing the sensing efficiency of nanomaterials has always been a challenge. However, the amendment of nanostructure with molecular ligand increases the sensitivity, selectivity, and analytical performance of the resulting novel sensing platform. Organic ligands are capable of increasing the adsorption efficacy, optical properties, and electrochemical properties of nanomaterials by reducing or splitting of band gap. Curcumin (diferuloylmethane) is a natural organic ligand that exhibits inherent fluorescence and electrocatalytic property. Due to keto-enol tautomerism, it is capable of giving sensitive signals such as fluorescence, luminescence, ultraviolet absorption shifts, and electrochemical data. Curcumin probes were also reported to give enhanced meterological performances, such as low detection limit, repeatability, reproducibility, high selectivity, and high storage stability when used with nanosystem. Therefore, research on curcumin-modified nanomaterials in the detection of environmental pollution needs a special focus for prototype and product development to enable practical use. Hence, this article reviews the role of curcumin as a natural fluorophore in optical and electrochemical sensing of environmentally significant pollutants. This review clearly shows that curcumin is an ideal candidate for developing and validating nanomaterials-based sensors for the detection of environmental pollutants such as arsenic, lead, mercury, boron, cyanide, fluoride, nitrophenol, trinitrotoluene, and picric acid and toxic gases such as ammonia and hydrogen chloride. This review will afford references for future studies and enable researchers to translate the lab concepts into industrial products.

Ruthenium-based PACT agents based on bisquinoline chelates: synthesis, photochemistry, and cytotoxicity

The known ruthenium complex [Ru(tpy)(bpy)(Hmte)](PF6)2 ([1](PF6)2, where tpy = 2,2':6',2″-terpyridine, bpy = 2,2'-bipyridine, Hmte = 2-(methylthio)ethanol) is photosubstitutionally active but non-toxic to cancer cells even upon light irradiation. In this work, the two analogs complexes [Ru(tpy)(NN)(Hmte)](PF6)2, where NN = 3,3'-biisoquinoline (i-biq, [2](PF6)2) and di(isoquinolin-3-yl)amine (i-Hdiqa, [3](PF6)2), were synthesized and their photochemistry and phototoxicity evaluated to assess their suitability as photoactivated chemotherapy (PACT) agents. The increase of the aromatic surface of [2](PF6)2 and [3](PF6)2, compared to [1](PF6)2, leads to higher lipophilicity and higher cellular uptake for the former complexes. Such improved uptake is directly correlated to the cytotoxicity of these compounds in the dark: while [2](PF6)2 and [3](PF6)2 showed low EC50 values in human cancer cells, [1](PF6)2 is not cytotoxic due to poor cellular uptake. While stable in the dark, all complexes substituted the protecting thioether ligand upon light irradiation (520 nm), with the highest photosubstitution quantum yield found for [3](PF6)2 (Φ[3] = 0.070). Compounds [2](PF6)2 and [3](PF6)2 were found both more cytotoxic after light activation than in the dark, with a photo index of 4. Considering the very low singlet oxygen quantum yields of these compounds, and the lack of cytotoxicity of the photoreleased Hmte thioether ligand, it can be concluded that the toxicity observed after light activation is due to the photoreleased aqua complexes [Ru(tpy)(NN)(OH2)]2+, and thus that [2](PF6)2 and [3](PF6)2 are promising PACT candidates.

2,2'-Dipyridylamines: more than just sister members of the bipyridine family. Applications and achievements in homogeneous catalysis and photoluminescent materials

2,2'-Dipyridylamines (dpa) and related compounds belong to the family of polydentate nitrogen ligands. More than a century has passed since their first report but new complexes and applications have been emerging in recent years owing to the versatility of dpa-based architectures. This review aims to present and highlight the main achievements attained with dpa-containing metal complexes in the domains of homogeneous catalysis and luminescent materials.

A simple benzimidazole styryl-based colorimetric chemosensor for dual sensing application

A new colorimetric styryl-benzimidazole based receptor to recognize more than one analyte trans-2-[4'-(dimethylamino)styryl]benzimidazole) (L1) has been synthesized and fully characterized by ¹³C and ¹H NMR, elemental analysis, UV-vis spectroscopy, and HRMS. Investigation of sensing ability of receptor L1 was carried out in presence of multiple anions (Br^-, CN^-, Cl^-, ClO₄^-, F^-, HSO₄^-, PF₆^-, NO₃^-, S^2-, OH^-, AcO^- and H₂PO₄^-) and cations (Cu²⁺, Cr³⁺, Al³⁺, Mg²⁺, Cd²⁺, Ni²⁺, Fe³⁺, K⁺, Fe²⁺, Mn²⁺, Ag⁺, Hg²⁺, Ca²⁺, Co²⁺, Pb²⁺, Na⁺, and Zn²⁺) by using UV-vis spectroscopy. Receptor L1 showed colorimetric response towards only for HSO₄^- ion. Receptor L1-HSO₄^- interaction confirmed with the help of ¹H NMR titration. Among various cations, L1 selectively sense the Cu²⁺ and Al³⁺ with the drastic colour change from yellow to green and dark yellow respectively. The stoichiometric binding ratio of L1 with HSO₄^-, Cu²⁺, and Al³⁺ found to be 1:1 by jobs method and HRMS data proved the complex formation between L1 and Cu²⁺/Al³⁺ with very low detection limit. In addition to explore practical applicability of L1, paper strips have been made and used to detect HSO₄^- and Cu²⁺ ions, respectively, up to 10 ppm level.

Graphene nanosheets modified with curcumin-decorated manganese dioxide for ultrasensitive potentiometric sensing of mercury(II), fluoride and cyanide

A glassy carbon electrode (GCE) was modified by electropolymerization of curcumin on MnO₂-Gr nanosheets to obtain a detection method for Hg(II) and for the anions fluoride and cyanide. The complexation by curcumin can be monitored by potentiometry. The results revealed a cathodic shift for the simultaneous detection of fluoride and cyanide and an anodic shift for the mercury(II) sensing, with peak potentials of -0.24, 0.12 and 0.82 V, respectively (vs. Ag/AgCl). The modified GCE is fairly selective, reproducible and repeatable. The detection limits are 19.2 nM for Hg(II), 17.2 nM for fluoride, and 28.3 nM for cyanide (LOD, S/N = 3). The method was successfully applied to the analysis of spiked samples of tap water, river water and petrochemical refinery wastewater. Graphical abstract Schematic of an electrochemical curcumin-MnO₂-graphene nanosheet platform for the simultaneous assay of fluoride, cyanide and mercury(II) in the ppb concentration range in various natural and wastewater samples.

A pyrene-benzimidazole composed effective fluoride sensor: potential mimicking of a Boolean logic gate

A highly selective fluoride sensor based on a pyrene benzimidazole unit was developed and studied for recyclable memory function.

A ruthenium(iii) complex derived from N,N′-bis(salicylidene)ethylenediamine as a chemosensor for the selective recognition of acetate and its interaction with cells for bio-imaging: experimental and theoretical studies

A ruthenium(iii) complex ofN,N′-bis(salicylidene)ethylenediamine (L¹) was used as chemosensor for the recognition of acetate in cells for bio-imaging.