Exploring the Versatility of Aerogels: Broad Applications in Biomedical Engineering, Astronautics, Energy Storage, Biosensing, and Current Progress

Aerogels are unique and extremely porous substances with fascinating characteristics such as ultra-low density, extraordinary surface area, and excellent thermal insulation capabilities. Due to their exceptional features, aerogels have attracted significant interest from various fields, including energy, environment, aerospace, and biomedical engineering. This review paper presents an overview of the trailblazing research on aerogels, aiming at their preparation, characterization, and applications. Various methods of aerogel synthesis, such as sol-gel, supercritical drying, are discussed. Additionally, recent progress in the characterization of aerogel structures, including their morphology, porosity, and thermal properties, are extensively reviewed. Finally, aerogel's utilizations in numerous disciplines, for instance, energy storage, thermal insulation, catalysis, environmental remedy, and biomedical applications, are summarized. This review paper provides a comprehensive understanding of aerogels and their prospective uses in diverse fields, highlighting their unique properties for future research and development.

Fabrication of Mechanically Strong Silica Aerogels with the Thermally Induced Phase Separation (TIPS) Method of Poly(methyl methacrylate)

Constructing and maintaining a three-dimensional network structure with high porosity is critical to the preparation of silica aerogel materials because this structure provides excellent properties. However, due to the pearl-necklace-like structure and narrow interparticle necks, aerogels have poor mechanical strength and a brittle nature. Developing and designing lightweight silica aerogels with distinct mechanical properties is significant to extend their practical applications. In this work, thermally induced phase separation (TIPS) of poly(methyl methacrylate) (PMMA) from a mixture of ethanol and water was used to strengthen the skeletal network of aerogels. Strong and lightweight PMMA-modified silica aerogels were synthesized via the TIPS method and supercritically dried with carbon dioxide. The cloud point temperature of PMMA solutions, physical characteristics, morphological properties, microstructure, thermal conductivities, and mechanical properties were investigated. The resultant composited aerogels not only exhibit a homogenous mesoporous structure but also achieve a significant improvement in mechanical properties. The addition of PMMA increased the flexural strength and compressive strength by as much as 120% and 1400%, respectively, with the greatest amount of PMMA (M_w = 35,000 g/mole), while the density just increased by 28%. Overall, this research suggests that the TIPS method has great efficiency in reinforcing silica aerogels with less sacrifice of low density and large porosity.

Carbon Nanodots from an In Silico Perspective

Carbon nanodots (CNDs) are the latest and most shining rising stars among photoluminescent (PL) nanomaterials. These carbon-based surface-passivated nanostructures compete with other related PL materials, including traditional semiconductor quantum dots and organic dyes, with a long list of benefits and emerging applications. Advantages of CNDs include tunable inherent optical properties and high photostability, rich possibilities for surface functionalization and doping, dispersibility, low toxicity, and viable synthesis (top-down and bottom-up) from organic materials. CNDs can be applied to biomedicine including imaging and sensing, drug-delivery, photodynamic therapy, photocatalysis but also to energy harvesting in solar cells and as LEDs. More applications are reported continuously, making this already a research field of its own. Understanding of the properties of CNDs requires one to go to the levels of electrons, atoms, molecules, and nanostructures at different scales using modern molecular modeling and to correlate it tightly with experiments. This review highlights different in silico techniques and studies, from quantum chemistry to the mesoscale, with particular reference to carbon nanodots, carbonaceous nanoparticles whose structural and photophysical properties are not fully elucidated. The role of experimental investigation is also presented. Hereby, we hope to encourage the reader to investigate CNDs and to apply virtual chemistry to obtain further insights needed to customize these amazing systems for novel prospective applications.

Thermally stable surfactant-free ceria nanocubes in silica aerogel

Surfactant-mediated chemical routes allow one to synthesize highly engineered shape- and size-controlled nanocrystals. However, the occurrence of capping agents on the surface of the nanocrystals is undesirable for selected applications. Here, a novel approach to the production of shape-controlled nanocrystals which exhibit high thermal stability is demonstrated. Ceria nanocubes obtained by surfactant-mediated synthesis are embedded inside a highly porous silica aerogel and thermally treated to remove the capping agent. Powder X-ray Diffraction and Scanning Transmission Electron Microscopy show the homogeneous dispersion of the nanocubes within the aerogel matrix. Remarkably, both the size and the shape of the ceria nanocubes are retained not only throughout the aerogel syntheses but also upon thermal treatments up to 900 °C, while avoiding their agglomeration. The reactivity of ceria is measured by in situ High-Energy Resolution Fluorescence Detected - X-ray Absorption Near Edge Spectroscopy at the Ce L₃ edge, and shows the reversibility of redox cycles of ceria nanocubes when they are embedded in the aerogel. This demonstrates that the enhanced reactivity due to their prominent {100} crystal facets is preserved. In contrast, unsupported ceria nanocubes begin to agglomerate as soon as the capping agent decomposes, leading to a degradation of their reactivity already at 275 °C.

Silica-graphene porous nanocomposites for environmental remediation: A critical review

With the increase of industrialization, there is an urgent need for developing technologies to detect and remove toxic pollutants from water bodies. The pollutants are often released to the environment due to the consumption of raw materials that are necessary for the production of technological goods (such as chemical and pharmaceutical compounds, metals, and alloys or foods). Amongst all the remediation techniques, adsorption is considered as one of the preferred techniques, due to its fast and efficient removal of contaminants. Novel materials, which are engineered for selective and responsive water remediation, have also recently revealed a strong potential in the detection of pollutants. Here, current trends of silica-graphene (SG) porous composites for the removal of oils, organic solvents, heavy metals, and dyes are reviewed in detail. Insights on the modifications of composites to enhance their sorption performance have been highlighted. In addition, the detection of pollutants using porous SG nanocomposites is also critically reviewed. Overall, SG composites reveal a strong potential as nanostructure materials with improved efficiency for environmental-based applications.

Growing CeO2 Nanoparticles Within the Nano-Porous Architecture of the SiO2 Aerogel

In this study, new CeO₂-SiO₂ aerogel nanocomposites obtained by controlled growth of CeO₂ nanoparticles within the highly porous matrix of a SiO₂ aerogel are presented. The nanocomposites have been synthesized via a sol-gel route, employing cerium (III) nitrate as the CeO₂ precursor and selected surfactants to control the growth of the CeO₂ nanoparticles, which occurs during the supercritical drying of the aerogels. Samples with different loading of the CeO₂ dispersed phase, ranging from 5 to 15%, were obtained. The nanocomposites showed the morphological features typical of the SiO₂ aerogels such as open mesoporosity with surface area values up to 430 m²·g^-1. TEM and XRD characterizations show that nanocrystals of the dispersed CeO₂ nanophase grow within the aerogel already during the supercritical drying process, with particle sizes in the range of 3 to 5 nm. TEM in particular shows that the CeO₂ nanoparticles are well-distributed within the aerogel matrix. We also demonstrate the stability of the nanocomposites under high temperature conditions, performing thermal treatments in air at 450 and 900°C. Interestingly, the CeO₂ nanoparticles undergo a very limited crystal growth, with sizes up to only 7 nm in the case of the sample subjected to a 900°C treatment.

Advances in precursor system for silica-based aerogel production toward improved mechanical properties, customized morphology, and multifunctionality: A review

Conventional silica-based aerogels are among the most promising materials considering their special properties, such as extremely low thermal conductivity (~15 mW/mK) and low-density (∼0.003-0.5 g.cm^-3) as well as high surface area (500-1200 m². g^-1). However, they have relatively low mechanical properties and entail extensive and energy-consuming processing steps. Silica-based aerogels are mostly fragile and possess minimal mechanical properties as well as a long processing procedure which hinders their application range. The key point in improving the mechanical properties of such a material is to increase the connectivity in the aerogel backbone. Several methods of mechanical improvement of silica-based aerogels have been explored by researchers such as (i) use of flexible silica precursors in silica gel backbone, (ii) surface-crosslinking of silica particles with a polymer, (iii) prolonged aging step in different solutions, (iv) distribution of flexible nanofillers into the silica solution prior to gelation, and, most recently, (v) polymerizing the silica precursor prior to gelation. The polymerized silica precursor, as in the most recent approach, can be gelled either by binodal decomposition (nucleation and growth), resulting in a particulate structure, or by spinodal decomposition, resulting in a non-particulate structure. By optimizing the material composition and processing conditions of materials, the aerogel can be tailored with different functional capabilities. This review paper presents a literature survey of precursor modification toward increased connectivity in the backbone, and the synthesis of inorganic and hybrid systems containing siloxane in the backbone of the silica-based aerogels and its composite version with carbon nanofillers. This review also explains the novel properties and applications of these material systems in a wide area. The relationship among the materials-processing-structure-properties in these kinds of aerogels is the most important factor in the development of aerogel products with given morphologies (particulate, fiber-like, or non-particulate) and their resultant properties. This approach to advancing precursor systems leads to the next-generation, multifunctional silica-based aerogel materials.

Recent advances in the application of silica nanostructures for highly improved water treatment: a review

The demand for high-quality safe and clean water supply has revolutionized water treatment technologies and become a most focused subject of environmental science. Water contamination generally marks the presence of numerous toxic and harmful substances. These contaminants such as heavy metals, organic and inorganic pollutants, oil wastes, and chemical dyes are discharged from various industrial effluents and domestic wastes. Among several water treatment technologies, the utilization of silica nanostructures has received considerable attention due to their stability, sustainability, and cost-effective properties. As such, this review outlines the latest innovative approaches for synthesis and application of silica nanostructures in water treatment, apart from exploring the gaps that limit their large-scale industrial application. In addition, future challenges for improved water remediation and water quality technologies are keenly discussed.

Nanoindentation of Graphene-Reinforced Silica Aerogel: A Molecular Dynamics Study

In the present work, we performed nanoindentation tests using molecular dynamics (MD) simulations on graphene, native silica aerogels, and single- and multi-layered graphene-reinforced silica aerogel nanocomposites. This work mainly focused on the two aspects of nanoindentation simulations: first, the resultant indentation force-depth curves, and second, the associated mechanical deformation behavior. We found that in the single-layer graphene-reinforced silica aerogel nanocomposite, the indentation resistance was four-fold that of native silica aerogels. Moreover, the combined system proved to be higher in stiffness compared to the individual material. Furthermore, the indentation resistance was increased significantly as we proceeded from single- to two-layered graphene-reinforced silica aerogel nanocomposites. The results of the study provide a detailed understanding of the mechanical behavior during the indentation tests of nanocomposites, which helps to design advanced nanoscale multi-layered materials.

The effect of graphene-nanoplatelets on gelation and structural integrity of a polyvinyltrimethoxysilane-based aerogel

Aerogels suffer greatly from poor mechanical properties resulting from their particulate structure. They also experience noticeable pore shrinkage during drying due to their low structural integrity. These shortfalls limit their broad application. To enhance the mechanical properties and improve the structural integrity of silica-based aerogels, graphene nanoplatelets (GnPs), as a nanofiller, were embedded into the solution of polymerized vinyltrimethoxysilane (VTMS) to prepare P-VTMS-based silica/GnP (PE-b-Si/GnP) hybrid aerogel monoliths based on sol–gel synthesis and supercritical drying. The inclusion of GnPs in our polymer-based silica aerogel processes reinforced the nanostructure and suppressed PE-b-Si nanopore shrinkage during supercritical drying, thus acting as an effective anti-shrinkage nanofiller. Accordingly, the GnPs significantly contributed to the PE-b-Si solution's uniform gelation and to the change of the hydrophilic nature to a hydrophobic one even with 1 wt% addition. In this study, the influence of the GnP content on the sol–gel process, structure, and physical properties of PE-based silica aerogels is studied.

Aerogels suffer greatly from poor mechanical properties resulting from their particulate structure.

A new type of microphotoreactor with integrated optofluidic waveguide based on solid-air nanoporous aerogels

In this study, we developed a new type of microphotoreactor based on an optofluidic waveguide with aqueous liquid core fabricated inside a nanoporous aerogel. To this end, we synthesized a hydrophobic silica aerogel monolith with a density of 0.22 g cm^-3 and a low refractive index of 1.06 that-from the optical point of view-effectively behaves like solid air. Subsequently, we drilled an L-shaped channel within the monolith that confined both the aqueous core liquid and the guided light, the latter property arising due to total internal reflection of light from the liquid-aerogel interface. We characterized the efficiency of light guiding in liquid-filled channel and-using the light delivered by waveguiding-we carried out photochemical reactions in the channel filled with aqueous solutions of methylene blue dye. We demonstrated that methylene blue could be efficiently degraded in the optofluidic photoreactor, with conversion increasing with increasing power of the incident light. The presented optofluidic microphotoreactor represents a versatile platform employing light guiding concept of conventional optical fibres for performing photochemical reactions.

Robust urethane-bridged silica aerogels available for water-carved aerosculptures

Novel in situ bridged silica precursors were used to synthesize robust aerogels for aerosculptures carved with aqueous solvents.