The electrical behaviour of ultrafine bismuth phosphate particles under a range of temperature and frequency conditions

Organic-molecule-stabilized ultrafine bismuth phosphate was synthesized by applying a wet chemical complexation-mediated route. Structural analysis confirmed the formation of monoclinic-phase nanoparticles made up of four-coordinated PO₄ tetrahedral and eight-coordinated BiO₈ polyhedral units. The dielectric, electrical conductivity, and impedance behaviour of the synthesized material was investigated under a wide range of frequency and temperature conditions. An alternating current conductivity study confirmed that the conduction process was followed by small and large polaron tunnelling mechanisms. An electric field-induced polarization study showed the formation of a hysteresis loop, generated as a result of the strong dipolar interactions through the Bi^δ+-O^δ--type covalent bonds.

Pt nanoparticles decorated heterostructured g-C3N4/Bi2MoO6 microplates with highly enhanced photocatalytic activities under visible light

Exploring an efficient and photostable heterostructured photocatalyst is a pivotal scientific topic for worldwide energy and environmental concerns. Herein, we reported that Pt decorated g-C₃N₄/Bi₂MoO₆ heterostructured composites with enhanced photocatalytic performance under visible light were simply synthesized by one-step hydrothermal method for methylene blue (MB) dye degradation. Results revealed that the synthetic Pt decorated g-C₃N₄/Bi₂MoO₆ composites with Bi₂MoO₆ contents of 20 wt.% (Pt@CN/20%BMO) presented the highest photocatalytic activity, exhibiting 7 and 18 times higher reactivity than the pure g-C₃N₄ and Bi₂MoO₆, respectively. Structural analyses showed that Bi₂MoO₆ microplates were anchored on the wrinkled flower-like g-C₃N₄ matrix with Pt decoration, leading to a large expansion of specific surface area from 10.79 m²/g for pure Bi₂MoO₆ to 46.09 m²/g for Pt@CN/20%BMO. In addition, the Pt@CN/20%BMO composites exhibited an improved absorption ability in the visible light region, presenting a promoted photocatalytic MB degradation. Quenching experiments were also conducted to provide solid evidences for the production of hydroxyl radicals (^•OH), electrons (e⁻), holes (h⁺) and superoxide radicals (^•O²⁻) during dye degradation. The findings in this critical work provide insights into the synthesis of heterostructured photocatalysts with the optimization of band gaps, light response and photocatalytic performance in wastewater remediation.

Construction of in situ self-assembled FeWO4/g-C3N4 nanosheet heterostructured Z-scheme photocatalysts for enhanced photocatalytic degradation of rhodamine B and tetracycline

Although photocatalytic degradation is an ideal strategy for cleaning environmental pollution, it remains challenging to construct a highly efficient photocatalytic system by steering the charge flow in a precise manner. In this work, a novel, highly efficient, stable, and visible light active hybrid photocatalytic system consisting of FeWO4 and g-C3N4 nanosheets (CNNs) has been successfully prepared by an in situ self-assembly solvothermal approach. Several characterization techniques were employed to study the phase structures, morphologies, optical properties, surface composition and chemical state of the as-prepared samples. SEM and TEM results demonstrated that the FeWO4 nanoparticles are uniformly dispersed on the surface of CNNs with a diameter of about 10-20 nm, which could provide maximum interfacial contact and a synergistic coupling effect between FeWO4 and CNNs. XPS and FTIR results confirmed that there was strong electrostatic interaction between FeWO4 and CNNs, suggesting the formation of heterojunctions between them. In addition, UV-DRS and PL spectroscopy revealed that the FeWO4/CNN composites exhibited increased visible light absorption and improved charge generation/separation efficiency. As a result, the photocatalytic activity of the FeWO4/CNNs was enhanced in comparison with pure FeWO4 and CNNs for rhodamine B (RhB) and tetracycline (TC) degradation under natural sunlight irradiation. The photocatalytic efficiency of the optimal FeWO4/CNN composite (10 wt% FeWO4/CNNs) for the degradation of RhB (TC) was about 13.26 (4.95) and 86.2 (31.1) times higher than that of pure FeWO4 and CNNs, respectively. Meanwhile, the 10 wt% FeWO4/CNN sample exhibits good photocatalytic stability in recycling experiments. The enhanced photocatalytic activity may be attributed to the formation of the Z-scheme system between FeWO4 and CNNs, effectively prolonging the lifetime of the photoexcited electrons generated by CNNs and the photoexcited holes generated by FeWO4, which was subsequently confirmed by the active species trapping experiments and the calculation of relative band alignments. This work opens up a new feasible avenue to synthesize visible light active Z-scheme photocatalysts for application in energy production and environmental remediation.

Hybrid materials based on conjugated polymers and inorganic semiconductors as photocatalysts: from environmental to energy applications

Hybrid materials photocatalysts based on conjugated polymers and inorganic semiconductors provide a sustainable way to remove pollutants or store energy in the form of solar fuels by processes such as water splitting, CO₂ photoreduction and NH₃ production (artificial photosynthesis).

Facile fabrication of a novel BiPO4 phase junction with enhanced photocatalytic performance towards aniline blue degradation

A novel BiPO₄ photocatalyst has been fabricated via a facile precipitation route using dimethyl sulfoxide (DMSO) as a solvent. The physical and chemical properties of the BiPO₄ photocatalyst material were analyzed using XRD, Rietveld refinements XRD, FE-SEM, TEM, HR-TEM, EDS, XPS, FT-IR, Raman spectra, UV-Vis (DRS), and PL. The results confirm that hexagonal phase BiPO₄ (HBIP) nanorods were successfully synthesized. FE-SEM images reveal that the addition of surfactant “CTAB” during preparation can control the surface morphology of BiPO₄. The Rietveld refinement technique revealed the formation of a monazite monoclinic (nMBIP) and monoclinic (mMBIP) phase junction resulting from the calcination of HBIP at 500 °C. The photocatalytic behavior of the as-synthesized hexagonal and monoclinic BiPO₄ nanostructures towards aniline blue (AB) degradation under UV light was systematically investigated. Among all catalysts, the phase junction (nMBIP–mMBIP) structure demonstrated the highest photocatalytic activity. The degradation rate of AB over the (nMBIP–mMBIP) phase junction structure was 3.4 times higher than that by HBIP. These results suggested that the surface-phase junction provides a synergistic effect for the electron–hole transfer process.

A novel BiPO₄ photocatalyst has been fabricated via a facile precipitation route using dimethyl sulfoxide (DMSO) as a solvent.

A novel Z-scheme sonocatalyst system, Er3+:Y3Al5O12@Ni(Fe0.05Ga0.95)2O4-Au-BiVO4, and application in sonocatalytic degradation of sulfanilamide

A novel Z-scheme coated composite, Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄, was designed for sonocatalytic degradation of sulfanilamide and fabricated by sol-hydrothermal and calcination methods. The prepared sample was characterized by X-ray diffractometer (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), UV-vis diffuse reflectance spectra (DRS), fourier transform infrared (FT-IR) spectra, Raman spectra and photoluminescence (PL) spectra. In Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄, Ni(Fe_0.05Ga_0.95)₂O₄ and BiVO₄ form a Z-scheme sonocatalytic system, Er³⁺:Y₃Al₅O₁₂ as an up-conversion luminescence agent (from visible-light to ultraviolet-light) provides the ultraviolet-light for satisfying the energy demand of wide band-gap Ni(Fe_0.05Ga_0.95)₂O₄ and Au nanoparticles as co-catalyst forms more active sites to enrich electrons. Also, Au nanoparticles as conductive channels promotes the electrons (e^-) from conduction band of BiVO₄ to transfer to valence band of Ni(Fe_0.05Ga_0.95)₂O₄. Due to the characteristics of valence state diversity, the Fe³⁺ and V⁵⁺ constitute a redox reaction recombination system, which can also push electrons (e^-) on conduction band of BiVO₄ to quickly transfer to valence band of Ni(Fe_0.05Ga_0.95)₂O₄. The sonocatalytic activity of Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄ nanocomposite was detected through degradation of sulfanilamide under ultrasonic irradiation. A high sonocatalytic degradation ratio (95.64%) of sulfanilamide can be obtained when the conditions of 10.00 mg/L sulfanilamide, 1.00 g/L Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄, 300 min ultrasonic irradiation and 100 mL total volume were adopted. Some factors such as ultrasonic irradiation time and cycle number on the sonocatalytic degradation efficiency are also investigated by using TOC and UV-vis spectroscopy. Subsequently, the effects of hydroxyl radicals (OH) and hole scavengers were investigated to elaborate the mechanism. The researches show that the prepared Z-scheme Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄ coated composite displayed an excellent sonocatalytic activity in degradation of sulfanilamide under ultrasonic irradiation.

Novel Bi2O2CO3/polypyrrole/g-C3N4 nanocomposites with efficient photocatalytic and nonlinear optical properties

A series of novel Bi₂O₂CO₃/polypyrrole/g-C₃N₄ nanocomposites loaded with different contents of g-C₃N₄ was demonstrated for recyclable photocatalysis and nonlinear optical applications.

Towards full-spectrum (UV, visible, and near-infrared) photocatalysis: achieving an all-solid-state Z-scheme between Ag2O and TiO2 using reduced graphene oxide as the electron mediator

We prepare an all-solid-state Z-scheme photocatalyst (RGO–Ag₂O/TiO₂ composites) for photocatalytic degradation of tetracycline under UV, visible and NIR light irradiation.