Insights into the Mechanism of Efficient Cr(VI) Removal from Aqueous Solution by Iron-Rich Wheat Straw Hydrochar: Coupling DFT Calculation with Experiments

Agricultural solid waste has become one of the raw materials for hydrothermal carbon production, promoting resource utilization. This study synthesized two types of ball-milling carbons (Fe-MHBC vs MHBC) with and without FeCl3 modification using wheat straw hydrochars. Cr(VI) adsorption on these two types of ball-milling carbons was investigated. According to Langmuir's maximum adsorption capacity analysis, Fe-MHBC had a capacity of 116.29 mg g-1. The thermodynamic analysis based on isothermal adsorption reveals the spontaneous process of the reaction between the two materials. The adsorption of Cr(VI) on Fe-MHBC exhibited excellent agreement with the pseudo-second-order kinetics model. Furthermore, X-ray photoelectron spectroscopy analysis showed that Fe(II) in the material reduced Cr(VI) when it participated in the reaction. The acidic conditions facilitate the elimination of Cr(VI). The Fe-MHBC has a higher zeta potential, which enhances the electrostatic attraction of Cr(VI) particles. Even with a starting pH of 10, the removal rate can be consistently maintained at over 64%. The adsorption of Cr(VI) was inhibited by various anions and higher ion concentrations. Density functional theory demonstrates that the presence of Fe enhances the adsorption capacity and electron transfer flux of Cr(VI). Fe-MHBC effectively eliminates Cr(VI) by the process of electrostatic adsorption, redox, and complexation reactions. This study demonstrated that hydrochar materials modified by FeCl3 through a ball-milling process show considerable potential as effective adsorbents in the treatment of Cr(VI) pollution, offering a viable and environmentally friendly solution for mitigating this prevalent environmental issue.

Hyperbranched polyethyleneimine-functionalised chitosan aerogel for highly efficient removal of melanoidins from wastewater

Melanoidins are hazardous dark-coloured substances contained in molasses-based distillery wastewater. Adsorption is an effective approach to eliminate melanoidins from wastewater. However, melanoidin adsorption capacities of available adsorbents are unsatisfactory, which seriously limits their practical application. A hyperbranched polyethyleneimine-functionalised chitosan aerogel (HPCA) was fabricated as an effective adsorbent for melanoidin scavenging. HPCA demonstrated superior melanoidin adsorption efficiency because of its high specific surface area, abundant amino functional groups, and high hydrophilicity. Melanoidin removal rate of HPCA was 94.95%, which remained at 91.45% after 5 cycles. Notably, using the Langmuir isothermal model, the maximum melanoidin adsorption capacity of HPCA was determined to be 868.36 mg/g, surpassing those of most of previously reported adsorbents. Toxicity experiments indicated that HPCA can be considered a safe adsorbent with excellent biocompatibility that hardly threatens aquatic organisms. The efficient melanoidin removal of HPCA was attributed to electrostatic attraction, H-bonding, and van der Waals force. However, the adsorption might be predominantly controlled by electrovalent interaction between protonated amino groups of HPCA and carboxyl/carboxylate groups of melanoidins. Two novel models, namely, external diffusion resistance-internal diffusion resistance mixed model and adsorption on active site model, were employed to describe the dynamic mass transfer characteristics of melanoidin adsorption by HPCA.

Three-Dimensional Hierarchical Seaweed-Derived Carbonaceous Network with Designed g-C3N4 Nanosheets: Preparation and Mechanism Insight for 4-Nitrophenol Photoreduction

The development of g-C₃N₄-based photocatalysts with abundant active sites is of great significance for photocatalytic reactions. Herein, a smart and robust strategy was presented to fabricate three-dimensional (3D) g-C₃N₄ nanosheet-coated alginate-based hierarchical porous carbon (g-C₃N₄@HPC), including coating melamine on calcium alginate (CA) hydrogel beads, freeze-drying hydrogel beads as well as pyrolysis at high temperatures. The resulting photocatalyst possessed a significantly high surface area and a large amount of interconnected macropores compared with porous carbon without the melamine coating. The unique structural features could effectively inhibit the curling and agglomeration of g-C₃N₄ nanosheets, provide abundant photocatalytic active sites, and promote mass diffusion. Therefore, the g-C₃N₄@HPC composite exhibited remarkable photocatalytic activity and outstanding stability toward the photoreduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) by NaBH₄ under natural sunlight and simulated visible-light irradiation (λ > 420 nm) using a 300 W xenon lamp. Moreover, the mechanism toward the photocatalytic reaction was extensively studied by quenching experiments and electron spin resonance (ESR) experiments. The results showed that active hydrogen species were able to be achieved by following a dual-channel pathway in the NaBH₄ system, which included photocatalytic reduction of H⁺ ions and photocatalytic oxidation of BH₄^- ions. This work not only opens up a new way to design efficient photocatalysts for various reactions but also provides a reference for an in-depth study of the photoreduction mechanism.

In-situ formed Cyclodextrin-functionalized graphene oxide / poly (N-isopropylacrylamide) nanocomposite hydrogel as an recovery adsorbent for phenol and microfluidic valve

Phenolic compounds are important industrial raw materials for various industrial applications, but phenol-containing wastewater creates significant environmental and biological hazards. To address these issues, a three-dimensional network graphene oxide-cyanoethyltriethoxysilane-β-cyclodextrin/poly (N-isopropylacrylamide) (GO-CTES-β-CD/PNIPAM) nanocomposite hydrogel as a phenol recovery adsorbent is prepared herein by in-situ polymerization. Double graft modification on the graphene oxide (GO) via the silane coupling agent 2-cyanoethyltriethoxysilane (CTES) and single (6-tetraethylenepentamine-6-deoxy)-β-cyclodextrin (NH-β-CD) compensated the loss of the active sites on both GO and N-isopropylacrylamide (NIPAM), and the hydrogel shows excellent mechanical properties as the chemical crosslinking and physical entanglement of the two components. Consequently, the composite hydrogel achieved an adsorption capacity of 131.64 mg·g^-1 for the common environmental toxin 4-NP. After five repeated adsorption-desorption cycles, the hydrogel retained 74% of the initial 4-NP removal ratio. The adsorption results followed pseudo-first-order kinetics, corresponding to heterogeneous multilayer adsorption, which was regulated by a combination of surface adsorption and intra-particle diffusion mechanisms. In general, the nanocomposite hydrogel shows promising application in the field of recycling phenols from wastewater. Also, high photothermal conversion and temperature-sensitive properties are also demonstrated, which makes the hydrogel possessing great potential to be applied in smart microvalves.

Sustainable Removal of Contaminants by Biopolymers: A Novel Approach for Wastewater Treatment. Current State and Future Perspectives

Naturally occurring substances or polymeric biomolecules synthesized by living organisms during their entire life cycle are commonly defined as biopolymers. Different classifications of biopolymers have been proposed, focusing on their monomeric units, thus allowing them to be distinguished into three different classes with a huge diversity of secondary structures. Due to their ability to be easily manipulated and modified, their versatility, and their sustainability, biopolymers have been proposed in different fields of interest, starting from food, pharmaceutical, and biomedical industries, (i.e., as excipients, gelling agents, stabilizers, or thickeners). Furthermore, due to their sustainable and renewable features, their biodegradability, and their non-toxicity, biopolymers have also been proposed in wastewater treatment, in combination with different reinforcing materials (natural fibers, inorganic micro- or nano-sized fillers, antioxidants, and pigments) toward the development of novel composites with improved properties. On the other hand, the improper or illegal emission of untreated industrial, agricultural, and household wastewater containing a variety of organic and inorganic pollutants represents a great risk to aquatic systems, with a negative impact due to their high toxicity. Among the remediation techniques, adsorption is widely used and documented for its efficiency, intrinsic simplicity, and low cost. Biopolymers represent promising and challenging adsorbents for aquatic environments’ decontamination from organic and inorganic pollutants, allowing for protection of the environment and living organisms. This review summarizes the results obtained in recent years from the sustainable removal of contaminants by biopolymers, trying to identify open questions and future perspectives to overcome the present gaps and limitations.

Iron-crosslinked alginate derived Fe/C composites for atrazine removal from water

Fe/C composite is emerging as a promising nanoscale zero-valent iron (nZVI) based material for wastewater treatment to counteract the limitations of nZVI, while its preparation method, structure-activity relationship, and working mechanisms and conditions still need to be studied. In this study, Fe/C composites derived from iron-crosslinked alginate was successfully achieved via high temperature pyrolysis. Ferric ions were only transformed into Fe₃O₄/γ-Fe₂O₃ at low pyrolysis temperature (≤500 °C), whereas Fe⁰/Fe₃C became the primary Fe species with the formation of graphitic carbon at elevated pyrolysis temperature (≥700 °C). Fe/C composites from higher pyrolysis temperature presented better performance in atrazine (ATZ) removal, and the optimal pyrolysis temperature was 800 °C (Fe/C-800). Batch experiments showed that the removal kinetics of ATZ (10 mg L^-1) by Fe/C-800 (0.2 g L^-1) followed pseudo-second-order model, and 24-h ATZ removal efficiency maintained at 93.5 ± 1.0% within pH 3-9. The adsorption by the graphitic carbon phase of Fe/C-800 was the principal contributor to the pH-independent superior performance in ATZ removal, and the Langmuir model fitted adsorption capacity was 64.8 mg g^-1 at pH 6. Although the carbon-phase adsorbed ATZ was basically unavailable for degradation, Fe⁰/Fe₃C-mediated ATZ degradation contributed to the great reactivity of Fe/C-800 at pH 3. Fe⁰/Fe₃C in Fe/C-800 was more efficient for ATZ degradation than commercial nZVI, and oxidative dealkylation by Fe⁰/Fe₃C mediated Fenton reaction was the predominant ATZ degradation pathway rather than reductive dechlorination. Moreover, the produced ATZ degradation intermediates could be further adsorbed by Fe/C-800, mitigating potential secondary pollution. Thus, iron-crosslinked alginate derived Fe/C composites can be an excellent alternative for nZVI in organics-polluted water treatment with great reactivity and wide pH applicability.

Enhanced Cr(VI) removal from water using a green synthesized nanocrystalline chlorapatite: Physicochemical interpretations and fixed-bed column mathematical model study

Apatite-based minerals have attracted much attention in the remediation of heavy metal-contaminated environment. However, exploring apatite with efficient adsorption performance for inorganic oxyanions such as Cr(VI) remains a challenge. Herein, a novel nanocrystalline chlorapatite (ClAP) was promptly prepared by a green method using eggshell wastes as calcium source with the purpose to enhance Cr(VI) adsorption capability. The generated ClAP was characterized by XRD, SEM-EPMA, TEM, FTIR, and BET analyses. Batch and column experiments were subsequently carried out to explore the influencing factors, adsorption capacity and removal mechanism. Results showed that ClAP exhibited excellent stability and adsorption performance for Cr(VI) (63.47 mg g^-1), which was much greater than that of hydroxyapatite and most reported materials. The adsorption process was fitted well by the pseudo-second-order model and the Langmuir model. In fixed bed column experiments, a novel time-fractional derivative model exhibited much better suitability in interpreting the observed breakthrough curves of Cr(VI) than traditional models. Furthermore, the reusability of ClAP in column was evaluated. Results showed that the adsorption capacity maintained well after consecutively reused for five cycles. Studies of the effect of pH, as well as FTIR and XPS investigations indicated that Cr(VI) adsorption was mainly ascribed to electrostatic interactions and surface complexation, while the reduction of Cr(VI) to the low-toxicity Cr(III) also existed in the adsorption process. The ClAP adsorbent was also successfully used for Cr(VI) remediation from real wastewater. Hence, nanocrystalline ClAP can be a promising material for enhancing the elimination of oxyanion contaminants such as Cr(VI) from water.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Efficient Removal of Cr(VI) Ions by a Novel Magnetic 4-Vinyl Pyridine Grafted Ni3Si2O5(OH)4 Multiwalled Nanotube

The contamination of water systems by heavy metals greatly threatens human health and ecological safety. An efficient adsorbent is critical for the removal of these contaminants. In this work, magnetic Ni3Si2O5(OH)4 nanotubes (NTs) have been synthesized via in situ hydrothermal reduction and further functionalized by grafting poly(4-vinyl pyridine) (P4VP) brushes on its surface via atom transfer radical polymerization. Characterizations by Fourier transform infrared, X-ray diffraction, thermogravimetric analysis, transmission electron microscopy, and X-ray photoelectron spectroscopy proved that P4VP was successfully grafted on the surface of magnetic Ni3Si2O5(OH)4 NTs. The resultant Ni3Si2O5(OH)4-g-P4VP NTs are efficient nanosorbents for removing Cr(VI) anions from water. The Cr(VI) adsorption capacity of Ni3Si2O5(OH)4-g-P4VP NTs reaches 1.49 mmol/g at a pH of 3. The pseudo-second-order kinetic model and the Freundlich isothermal model are suitable to describe the adsorption process. The analysis using Weber-Morris and Boyd models indicates that both intraparticle diffusion and external film diffusion affect the Cr(VI) adsorption process. The adsorption enthalpy is estimated to be 18.37 kJ/mol. More than 90% of the Cr(VI) adsorption capacity of the Ni3Si2O5(OH)4-g-P4VP NTs remains after eight adsorption and desorption cycles.

Design of a preorganized adsorbent for the removal of chromate from wastewater under neutral conditions

A preorganized structure with two positive nitrogen ions linked by a carbon atom was designed. This structure acts like crab pincers to tightly entrap chromate.

Combining mussel and seaweed hydrogel-inspired strategies to design novel ion-imprinted sorbents for ultra-efficient lead removal from water

Lead(ii) is one of the most toxic heavy metals and is a serious threat to the environment and human health.

Potential Application of Saccharomyces cerevisiae and Rhizobium Immobilized in Multi Walled Carbon Nanotubes to Adsorb Hexavalent Chromium

The presence of harmful contaminants in the waste stream is an important concern worldwide. The convergence of biotechnology and nanoscience offers a sustainable alternative in treating contaminated waters. Hexavalent chromium, being carcinogenic deserves effective and sustainable methods for sequestration. Here in, we report the immobilization of a prokaryote (Rhizobium) and eukaryote (Saccharomyces cerevisiae) in multiwalled carbon nanotubes (MWCNTs) for the effective adsorption of hexavalent chromium. The carboxylic groups were introduced into the MWCNTs during oxidation using potassium permanganate and were subjected to EDC-HOBT coupling to bind with microbial cell surface. FTIR, TGA, BET, FESEM-EDAX, HRTEM, XPS and confocal microscopy were the investigative techniques used to characterize the developed biosorbents. Experimental variables such as pH, adsorbent dosage, kinetics, isotherms and thermodynamics were investigated and it was observed that the system follows pseudo second order kinetics with a best fit for Langmuir isotherm. Electrostatic interactions between the functional groups in the microbial cell wall and hydrochromate anion at pH 2.0 propel the adsorption mechanism. The lab scale column studies were performed with higher volumes of the Cr(VI) contaminated water. Sodium hydroxide was used as the desorbing agent for reuse of the biosorbents. The sustainable biosorbents show prospects to treat chromium contaminated water.

An efficient and reusable quaternary ammonium fabric adsorbent prepared by radiation grafting for removal of Cr(VI) from wastewater

A novel quaternary ammonium polyethylene nonwoven fabric for removing chromium ions from water was prepared via radiation-induced grafting of glycidyl methacrylate and further modification with N,N'-dimethylethylenediamine. The structural and morphological characteristics of the adsorbent were analyzed using Fourier transform infrared spectroscopy (FTIR), thermogravimetry and differential thermogravimetry (TG/DTG), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The influences of several principal factors, including pH value, initial Cr(VI) concentration, contact time, and coexisting anions (including SO₄^2-, CO₃^2-, NO₃^-, PO₄^3-, and Cl^-), on adsorption performance were investigated via batch tests. The results showed that the optimum removal efficiency was 99.2% at pH 3 and the maximum adsorption quantity for Cr(VI) at 25 °C was 336 mg/g. The adsorption kinetic parameters were better fitted with the pseudo-second-order kinetic model, and the equilibrium data were described very well by the Freundlich isotherm model. Furthermore, the as-synthesized adsorbent exhibited excellent regeneration and recyclability while maintaining high adsorption performance after five adsorption/desorption cycles.

Preparation of PEI/CS aerogel beads with a high density of reactive sites for efficient Cr(vi) sorption: batch and column studies

PEI/CS aerogel beads with a high density of reactive amino groups, with the aim of efficient Cr(vi) removal from aqueous solutions under column conditions, were easily prepared via combinational yet controllable sol–gel and freeze drying processes.

Polyethylenimine-functionalized cellulose aerogel beads for efficient dynamic removal of chromium(vi) from aqueous solution

Cellulose aerogel beads with high a density of reactive amino groups were facilely prepared via a cross-linking reaction for efficient dynamic removal of Cr(vi) from aqueous solutions.