Facile fabrication of AgVO3/rGO/BiVO4 hetero junction for efficient degradation and detoxification of norfloxacin

In the recent past, the development of efficient materials for degradation and detoxification of antibiotics has gained more attention in wastewater treatment process. As a visible light active material AgVO₃ has attracted much concern in environmental remediation. To improve its efficiency and stability, a novel heterojunction was prepared by combining AgVO₃ with rGO and BiVO₄ through a hydrothermal method. The prepared AgVO₃/rGO/BiVO₄ composite was further utilized for effective detoxification of Norfloxacin (NFC) antibiotic. The morphological analysis revealed the clear rod shaped AgVO₃ and leaf like BiVO₄ that are evenly distributed on reduced graphene oxide (rGO) layers. The visible light absorbance and the catalytic activity of AgVO₃/rGO/BiVO₄ was dramatically improved compared to pure AgVO₃ and BiVO₄. From the results it showed that the degradation efficiency of AgVO₃/rGO/BiVO₄ (∼96.1%, k = 0.01782 min^-1) was 2.5 times higher than pure AgVO₃ and 3.4 times higher than the pure BiVO₄ respectively towards NFC after 90 min. The higher efficiency could be attributed to the heterojunction formation and faster charge separation. The radical trapping experiments results indicated that the •OH, and O₂•- are the main species responsible for degradation. The degradation products of NFC were analysed through ESI-LC/MS and pathway was proposed. Furthermore, the toxicity assessment of pure NFC and its degradation products was studied using E. coli as the model bacteria through colony forming unit assay and the results indicated the efficient detoxification was attained during the degradation process. Thus, our study provides new insight into detoxification of antibiotics using AgVO₃ based composites.

Azo dyes degradation by microorganisms - An efficient and sustainable approach

Synthetic aromatic compounds consisting of various functional groups are known as dyes. These colored compounds are often discharged in effluents, and they are very dangerous to aquatic life. Basically, the dye industry started by using natural plant and insect sources, and then suddenly turned into artificial manufacturing. Natural equilibrium of our environment gets changed by the reduction in photosynthetic activity due to the dyes. In China 900,000 tons of all kinds of dyes are usually produced, which are used in many industries like food, textile, food, paper and leather. Untreated wastewater contaminates aquatic bodies by causing eutrophication, change in water color, oxygen depletion which affect aquatic organisms to a great extent. Dye wastewater is now the key environmental pollution form. In recent eras an extensive study line has been developed to explore the dye decolorization and biodegradation under both aerobic as well as anaerobic conditions. In this review, the chemistry, toxicity and microbial biodegradation/decolorization are presented. Some recent studies along with the new techniques and methodologies of remediating the dye pollution are also discussed to provide the bases of their handling. Overall, efficient and high biodegradation potential make microbes an impending foundation for green chemistry to eradicate toxic dyes from industrial wastewater.

Facile synthesis of ZnO nanoparticles by Actinidia deliciosa fruit peel extract: Bactericidal, anticancer and detoxification properties

Synthesis of nanoparticles by eco-friendly method pulled an extensive concern worldwide due its biocompatibility and wide range of applications as catalysts, microbicidal agents, cancer treatment, sensors etc. Though different chemical methods available for preparation of ZnO nanoparticles, synthesis by utilizing plant material is an excellent substitute and green method as well. The present study describes preparation of ZnO nanoparticles by low-cost green synthetic way using Actinidia deliciosa (kiwi) fruit peel extract and its excellent biological and catalytic properties. The synthesized nanoparticles were well characterized by UV visible spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Energy-dispersive X-ray spectroscopy (EDAX). The bactericidal activity of the ZnO nanoparticles was determined by using Staphylococcus aureus (S. aureus), while mechanism of cell death was studied by SEM images. Superior anticancer activity was also observed in inhibiting the colon cancer cells (HCT116) by the ZnO nanoparticles. In addition, ZnO nanoparticles showed efficient photocatalytic activity towards degradation of p-bromophenol, about 96.3% within 120 min. Furthermore, phytotoxicity of the intermediate products was analyzed using Vigna radiata (V. radiata) as a model plant. About 8.0% of germination index (GI) was observed in pure p-BP while it increased to 82.3%, and exhibited that the detoxification of p-BP was attained after 120 min of degradation. Thus, the present study demonstrates ZnO nanoparticles prepared from simple, rapid, inexpensive, eco-friendly and efficient green method gives alternative root for biomedicine and wastewater treatment technologies.

Engineering the Morphology and Crystal Phase of 3 D Hierarchical TiO2 with Excellent Photochemical and Photoelectrochemical Solar Water Splitting

Owing to their unique characteristics, hierarchical TiO₂ nanostructures have several advantages in solar-fuel production. In this work, a single-step approach has been developed to control both the crystal phase and morphology of TiO₂ with 3 D urchin-like structure via a surfactant-free solvothermal route. The growth of 3 D hierarchical structure with phase-engineered band alignment, the role of the H₂ O/HCl ratio, and fine-tuning of the reaction parameters are investigated systematically. An optimum ratio of anatase (41 %) to rutile (59 %) in the mixed-phase TiO₂ (AR-2) results in excellent photocatalytic H₂ generation activity of 5753 μmol g^-1 after 5 h of irradiation with apparent quantum yields of 20.9 % at 366 nm and 4.5 % at 420 nm. The superior performance of AR-2, attributed to efficient separation of charge carriers through the phase junction, is apparent from the transient photocurrent response and photoluminescence studies. The 3 D urchin-like pure rutile TiO₂ (R-1) composed of nanorods shows enhanced photocatalytic activity compared with pure anatase and pure rutile TiO₂ nanoparticles, and this demonstrates the role of morphology. The best-performing mixed-phase 3 D TiO₂ shows excellent durability up to 25 h and is shown to produce 3522 μmol g^-1 of H₂ under natural sunlight, which highlights its potential for long-term application.

Efficient detoxification of triclosan by a S-Ag/TiO2@g-C3N4 hybrid photocatalyst: process optimization and bio-toxicity assessment

Owing to their persistency and toxicity, development of an effective strategy to eliminate antibiotic residues from the aquatic system has become a major environmental concern. Doping TiO₂ with hetero atoms and forming a hybrid structure with g-C₃N₄ could serve as an efficient visible light active photocatalytic candidate. In this study, a novel S-Ag/TiO₂@g-C₃N₄ hybrid catalyst was prepared for visible light degradation and detoxification of triclosan (TS) antibiotic. The effect of various operational parameters towards the photocatalytic degradation was systematically evaluated through response surface methodology (RSM) based on central composite design (CCD). The highest TS degradation (92.3%) was observed under optimal conditions (TS concentration = 10 mg L^-1, pH = 7.8, and catalyst weight = 0.20 g L^-1) after 60 min. Efficient charge separation resulted from the doped nanoparticles (silver and sulphur), the existing integrated electric field of the heterojunction and the overlying light response of hybridized TiO₂ and g-C₃N₄, thus the S-Ag/TiO₂@g-C₃N₄ composite showed impressively higher activity. The main degradation products of TS were identified by LC/ESI-MS analysis. In addition, the toxicity of the degradation products was investigated through an Escherichia coli (E. coli) colony forming unit assay and the results revealed that under optimal conditions a significant reduction in biotoxicity was noticed.

Efficient detoxification of triclosan by a S–Ag/TiO2@g-C3N4hybrid photocatalyst: process optimization and bio-toxicity assessment

Owing to their persistency and toxicity, development of an effective strategy to eliminate antibiotic residues from the aquatic system has become a major environmental concern. Doping TiO₂ with hetero atoms and forming a hybrid structure with g-C₃N₄ could serve as an efficient visible light active photocatalytic candidate. In this study, a novel S–Ag/TiO₂@g-C₃N₄ hybrid catalyst was prepared for visible light degradation and detoxification of triclosan (TS) antibiotic. The effect of various operational parameters towards the photocatalytic degradation was systematically evaluated through response surface methodology (RSM) based on central composite design (CCD). The highest TS degradation (92.3%) was observed under optimal conditions (TS concentration = 10 mg L⁻¹, pH = 7.8, and catalyst weight = 0.20 g L⁻¹) after 60 min. Efficient charge separation resulted from the doped nanoparticles (silver and sulphur), the existing integrated electric field of the heterojunction and the overlying light response of hybridized TiO₂ and g-C₃N₄, thus the S–Ag/TiO₂@g-C₃N₄ composite showed impressively higher activity. The main degradation products of TS were identified by LC/ESI-MS analysis. In addition, the toxicity of the degradation products was investigated through an Escherichia coli (E. coli) colony forming unit assay and the results revealed that under optimal conditions a significant reduction in biotoxicity was noticed.

Owing to their persistency and toxicity, development of an effective strategy to eliminate antibiotic residues from the aquatic system has become a major environmental concern.

Photocatalytic mineralization and degradation kinetics of sulphamethoxazole and reactive red 194 over silver-zirconium co-doped titanium dioxide: Reaction mechanisms and phytotoxicity assessment

The photodegradation and phytotoxicity of the pharmaceutical antibiotic, sulphamethoxazole (SMX) and the azo-dye reactive-red-194 (RR194) under visible-light irradiation of TiO₂ nanoparticles modified by silver and zirconium was investigated. The results indicated that sulphamethoxazole and its toxic degradation by product, 3-amino-5-methylisoxazole and RR-194 could be degraded efficiently by the co-doped Zr/Ag-TiO₂ catalyst. PL studies and ROS generation results suggested that the effective charge separation was carried out while irradiation of the modified TiO₂ nanoparticles. Phytotoxicity tests demonstrated lower percentage of germination in P. vulgaris (40%), V. radiata (30%) and P. lunatus (30%) of the seeds treated with 50 ppm of SMX, compared to the seeds treated with the degradation products (100%). The results with 50 ppm of RR-194 also showed lower percentage of germination in P. vulgaris (40%), V. radiata (50%) and P. lunatus (30%) compared to the degradation products (100%). Furthermore, significant increase in root and shoot development was observed in the seeds treated with the degraded products when compared with SMX and RR-194. Overall, this study contributes to further understanding the photodegradation mechanisms, degradation products and environmental fate of SMX and RR-194 in water which helps in the evaluation and mitigation of the environmental risk of SMX and RR-194 for water reuse and crop irrigation.

Mechanistic study of visible light driven photocatalytic degradation of EDC 17α-ethinyl estradiol and azo dye Acid Black-52: phytotoxicity assessment of intermediates

The present study evaluated the phytotoxicity of degraded intermediates of an endocrine-disrupting compound (EDC) 17α-ethinyl estradiol (EE2) and toxic azo dye Acid Black-52 (AB-52) in photocatalytic degradation.