Electrospun Nanofibrous Membranes: A Versatile Medium for Waterproof and Breathable Application

Waterproof and breathable membranes that prevent liquid water penetration, while allowing air and moisture transmission, have attracted significant attention for various applications. Electrospun nanofiber materials with adjustable pore structures, easily tunable wettability, and good pore connectivity, have shown significant potential for constructing waterproof and breathable membranes. Herein, a systematic overview of the recent progress in the design, fabrication, and application of waterproof and breathable nanofibrous membranes is provided. The various strategies for fabricating the membranes mainly including one-step electrospinning and post-treatment of nanofibers are given as a starting point for the discussion. The different design concepts and structural characteristics of each type of waterproof and breathable membrane are comprehensively analyzed. Then, some representative applications of the membranes are highlighted, involving personal protection, desalination, medical dressing, and electronics. Finally, the challenges and future perspectives associated with waterproof and breathable nanofibrous membranes are presented.

Highly Breathable and Abrasion-Resistant Membranes with Micro-/Nano-Channels for Eco-Friendly Moisture-Wicking Medical Textiles

One-way water transport is a predominant feature of comfortable textiles used in daily life. However, shortcomings related to the textiles include their poor breathability and durability. In this study, low-cost and eco-friendly PLA/low-melt (polylactic acid) LMPLA-thermoplastic polyurethane (TPU) membranes were fabricated through a needle punch/hot press and electrospinning method. The micro-/nano-channels, used for the first time, endowed the composite membranes with robust, breathable, moisture-permeable, and abrasion-resistant performance. By varying the nano- layer thickness, the resulting 16-40 μm membranes exhibited excellent one-way water transport, robust breathability and moisture permeability, and good abrasion resistance. Nano-layer thickness was found to be a critical performance factor, balancing comfort and protection. These results may be useful for developing low-cost, eco-friendly, and versatile protective products for medical application.

Environmentally Friendly Polyamide Nanofiber Membranes with Interconnective Amphiphobic Channels for Seawater Desalination

Seawater desalination is a promising and sustainable solution to alleviate freshwater scarcity; however, most existing desalination membranes suffer from poor channel interconnectivity and toxic solvent processing and encounter a tradeoff dilemma of salt rejection and water flux. Herein, we report a unique and facile one-step green solvent/nonsolvent spinning methodology to assemble environmentally friendly polyamide nanofiber membranes with a precisely designed interconnective/stable channel structure and surface anti-wettability for seawater desalination. Direct electrospinning without any post-treatments via in situ introduction of fluorinated chemicals enables highly interconnective amphiphobic channels within polyamide membranes, and the incorporation of nonsolvent (diacetone alcohol) into polyamide/solvent (ethanol) spinning solutions endows the green alcohol-based polyamide membranes with a stable bonding structure and small pore size. The resultant green solvent/nonsolvent-spun polyamide nanofiber membranes show impressive liquid entry pressure (120.5 kPa) and vapor permeation (12.5 kg m^-2 d^-1), achieving robust seawater desalination performance with a salt rejection of 99.97% and permeate flux of 47.4 kg m^-2 h^-1. The facile one-step solvent/nonsolvent spinning strategy, highly interconnective amphiphobic channels, and green solvent-based environmental friendliness in this work can open opportunities for future polyamide membranes for practical applications in water purification.

Thermal and humid environment improvement of the protective clothing for medical use with a portable cooling device: Analysis of air supply parameters

COVID-19 has caused a huge impact on people's daily life and has made great damage on national economy. All the epidemic situation not only require the improvement of medical science, but also the corresponding auxiliary research field, e.g. the improve of protective clothing for medical use (MUPC). Developing a new kind of MUPC with portable cooling devices to improve medical workers' thermal comfort and protection performance of MUPC is imminent. In this paper, an integrated MUPC with a portable vortex tube cooling device was studied with experimental method. In a phytotron, a manikin wearing the MUPC was experimentally studied in terms of the influence of environment temperature and cool air supply conditions. On the basis of experiments, the MUPC inside air temperature and relative humidity, skin temperature of human body was studied with simulation method. Overall thermal sensation vote (TSV) and local TSV of human body were calculated, based on simulation results, to evaluate human thermal sensation. The results showed that, first, 50 L/min cool air flowrate with 18-20 °C supply temperature can create a good MUPC inside thermal sensation environment, for both head supply and body supply conditions. Both body supply condition and head supply condition cannot create a uniform MUPC inside thermal sensation environment. Second, MUPC inside air relative humidity is around or lower than 60% for most body parts, except for air supply position and body parts that air is difficult to reach. Thirdly, with cool air supplied into MUPC, a micro-positive pressure environment can be obtained, and the protection performance of MUPC can be improved.

Breathable Nanogenerators for an On-Plant Self-Powered Sustainable Agriculture System

Building an intelligent interface between plants and the environment is of paramount importance for real-time monitoring of the health status of plants, especially promising for high agricultural yield. Although the advancement of various sensors allows automated monitoring, developing a sustainable power supply for these electronic devices remains a formidable challenge. Herein, a waterproof and breathable triboelectric nanogenerator (WB-TENG) is designed based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanofibers embedded with fluorinated carbon nanotubes (F-CNT) microspheres, which was realized by simultaneous electrospinning and electrospraying, respectively. Using carbon nanotubes (CNT) as the electrode, the WB-TENG shows micro-to-nano hierarchical porous structures and high electrostatic adhesion, exhibiting a high output power density of 330.6 μW cm^-2, breathability, and hydrophobicity. Besides, the WB-TENG can be conformally self-attached to plant leaves without sacrificing the intrinsic physiological activities of plants, capable of harvesting typical environmental energy from wind and raindrops. Results demonstrate that the WB-TENG can serve as a sustainable power supply for a wireless plant sensor, enabling real-time monitoring of the health status of plants. This work realizes the concept of constructing a plant compatible TENG with environment adaptivity and energy scavenging ability, showing great potential in building a self-powered agriculture system.

Emerging Developments in the Use of Electrospun Fibers and Membranes for Protective Clothing Applications

There has been increased interest to develop protective fabrics and clothing for protecting the wearer from hazards such as chemical, biological, heat, UV, pollutants etc. Protective fabrics have been conventionally developed using a wide variety of techniques. However, these conventional protective fabrics lack breathability. For example, conventional protective fabrics offer good protection against water but have limited ability in removing the water vapor and moisture. Fibers and membranes fabricated using electrospinning have demonstrated tremendous potential to develop protective fabrics and clothing. These fabrics based on electrospun fibers and membranes have the potential to provide thermal comfort to the wearer and protect the wearer from wide variety of environmental hazards. This review highlights the emerging applications of electrospinning for developing such breathable and protective fabrics.

Tuning the gradient structure of highly breathable, permeable, directional water transport in bi-layered Janus fibrous membranes using electrospinning

In this paper, a novel bi-layered Janus fibrous electrospun membrane with robust moisture permeable, breathable and directional water transport properties is successfully fabricated and reported for the first time. This fibrous membrane consists of a thin inner layer of hydrophobic thermoplastic polyurethane (TPU) and a thick outer layer of super hydrophilic polyacrylonitrile (PAN). The PAN layer is coated with dopamine (PDA) to tailor the wettability. The subsequent TPU–PAN/PDA membrane demonstrates outstanding wettability and thickness gradients, which facilitate directional water transport from the TPU to the PAN/PDA layer and improve the WVT rate to 9065 g m⁻² d⁻¹ and the air permeability to 100 mm s⁻¹ (5.0 times higher than a commercial membrane). Furthermore, a plausible mechanism explaining the bi-layered Janus fibrous membrane performance is studied. The fibrous membrane is suggested to be a promising candidate for various applications, especially in moisture-wicking clothing.

In this paper, a novel bi-layered Janus fibrous electrospun membrane with robust moisture permeable, breathable and directional water transport properties is successfully fabricated and reported for the first time.

Development and comparison of single-step solid phase extraction and QuEChERS clean-up for the analysis of 7 mycotoxins in fruits and vegetables during storage by UHPLC-MS/MS

A robust and sensitive UHPLC-MS/MS method was developed for the analysis of seven mycotoxins in fruits and vegetables. The variations of seven mycotoxins concentrations during storage were also determined for the first time. Solid phase extraction (SPE) and QuEChERS clean-up were compared, and extraction was finally performed with acetonitrile under acidic conditions followed by HLB SPE purification. Seven mycotoxins were separated on a C18 column by gradient elution, scanned by ESI⁺ and ESI^- dynamic switching and detected with MRM mode. LOD and LOQ, matrix effect, accuracy and precision of the developed method were investigated. Results were linear in their concentration ranges for all mycotoxins with R² being greater than 0.999. LODs and LOQs were ranged from 0.05 to 3.0 μg/kg and 0.2 to 10.0 μg/kg, respectively. Average recoveries were between 81.1% and 116% with intraday- and interday-precision being in the ranges of 3.0-6.2% and 4.2-6.1%, respectively. The validated method provides sufficient selectivity, sensitivity and accuracy to screen for seven mycotoxins at trace levels, without using standard addition or matrix-matched calibration to compensate for matrix effects. The method was successfully applied for mycotoxins analysis in fruits and vegetables. None were detected in fresh samples, but AOH and AME were detected in strawberry, and TeA was detected in tomato fruits during long-term storage. Their concentrations were in the range of 3.6-165.3 μg/kg from 3 days to 60 days and significantly increased along with storage time.

Microsphere-Fiber Interpenetrated Superhydrophobic PVDF Microporous Membranes with Improved Waterproof and Breathable Performance

Superhydrophobic membranes with extreme liquid water repellency property are good candidates for waterproof and breathable application. Different from the mostly used strategies through either mixing or postmodifying base membranes with perfluorinated compounds, we report in this work a facile methodology to fabricate superhydrophobic microporous membranes made up of pure poly(vinylidene fluoride) (PVDF) via a high-humidity induced electrospinning process. The superhydrophobic property of the PVDF microporous membrane is contributed by its special microsphere-fiber interpenetrated rough structure. The effective pore size and porosity of the PVDF membranes could be well tuned by simply adjusting the PVDF concentrations in polymer solutions. The membrane with optimized superhydrophobicity and porous structure exhibits improved waterproof and breathable performance with hydrostatic pressure up to 62 kPa, water vapor transmission rate (WVT rate) of 10.6 kg m^-2 d^-1, and simultaneously outstanding windproof performance with air permeability up to 1.3 mm s^-1. Our work represents a rather simple and perfluorinated-free strategy for fabricating superhydrophobic microporous membranes, which matches well with the environmentally friendly requirement from the viewpoint of practical application.

Environmentally Friendly and Breathable Fluorinated Polyurethane Fibrous Membranes Exhibiting Robust Waterproof Performance

Waterproof and breathable membranes that provide a high level of protection and comfort are promising core materials for meeting the pressing demand for future upscale protective clothing. However, creating such materials that exhibit environmental protection, high performance, and ease of fabrication has proven to be a great challenge. Herein, we report a novel strategy for synthesizing fluorinated polyurethane (C6FPU) containing short perfluorohexyl (-C₆F₁₃) chains and introduced it as hydrophobic agent into a polyurethane (PU) solution for one-step electrospinning. A plausible mechanism about the dynamic behavior of fluorinated chains with an increasing C6FPU concentration was proposed. Benefiting from the utilization of magnesium chloride (MgCl₂), the fibrous membranes had dramatically decreased maximum pore sizes. Consequently, the prepared PU/C6FPU/MgCl₂ fibrous membranes exhibited an excellent hydrostatic pressure of 104 kPa, a modest water vapor transmission rate of 11.5 kg m^-2 d^-1, and a desirable tensile strength of 12.4 MPa. The facile fabrication of PU/C6FPU/MgCl₂ waterproof and breathable membranes not only matches well with the tendency to be environmentally protective but also fully meets the requirements for high performance in extremely harsh environments.

A novel gas conductor–gas barrier (GC–GB) blending membrane with adjustable gas separation capacity

A promising avenue to preserve harvested fruits and vegetables can be achieved by designing a “breathable” membrane named as equilibrium modified atmosphere packaging (EMAP).

Designing waterproof breathable material with moisture unidirectional transport characteristics based on a TPU/TBAC tree-like and TPU nanofiber double-layer membrane fabricated by electrospinning

The waterproof breathable double-layer membrane (inside was TPU-NMs and outside was TPU/TBAC-TLNMs) with both functions of protection and moisture unidirectional transport was successfully prepared by direct combination using electrospinning.