WS2 Nanotube-Embedded SiOC Fibermat Electrodes for Sodium-Ion Batteries

Layered transition metal dichalcogenides (TMDs) such as tungsten disulfide (WS₂) are promising materials for a wide range of applications, including charge storage in batteries and supercapacitors. Nevertheless, TMD-based electrodes suffer from bottlenecks such as capacity fading at high current densities, voltage hysteresis during the conversion reaction, and polysulfide dissolution. To tame such adverse phenomena, we fabricate composites with WS₂ nanotubes. Herein, we report on the superior electrochemical performance of ceramic composite fibers comprising WS₂ nanotubes (WS₂NTs) embedded in a chemically robust molecular polymer-derived ceramic matrix of silicon-oxycarbide (SiOC). Such a heterogeneous fiber structure was obtained via electrospinning of WS₂NT/preceramic polymer solution followed by pyrolysis at elevated temperatures. The electrode capacity fading in WS₂NTs was curbed by the synergistic effect between WS₂NT and SiOC. As a result, the composite electrode exhibits high initial capacity of 454 mAh g^-1 and the capacity retention approximately 2-3 times higher than that of the neat WS₂NT electrode.

WS2 Nanosheet Loaded Silicon-Oxycarbide Electrode for Sodium and Potassium Batteries

Transition metal dichalcogenides (TMDs) such as the WS₂ have been widely studied as potential electrode materials for lithium-ion batteries (LIB) owing to TMDs' layered morphology and reversible conversion reaction with the alkali metals between 0 to 2 V (v/s Li/Li⁺) potentials. However, works involving TMD materials as electrodes for sodium- (NIBs) and potassium-ion batteries (KIBs) are relatively few, mainly due to poor electrode performance arising from significant volume changes and pulverization by the larger size alkali-metal ions. Here, we show that Na⁺ and K⁺ cyclability in WS₂ TMD is improved by introducing WS₂ nanosheets in a chemically and mechanically robust matrix comprising precursor-derived ceramic (PDC) silicon oxycarbide (SiOC) material. The WS₂/SiOC composite in fibermat morphology was achieved via electrospinning followed by thermolysis of a polymer solution consisting of a polysiloxane (precursor to SiOC) dispersed with exfoliated WS₂ nanosheets. The composite electrode was successfully tested in Na-ion and K-ion half-cells as a working electrode, which rendered the first cycle charge capacity of 474.88 mAh g^-1 and 218.91 mAh g^-1, respectively. The synergistic effect of the composite electrode leads to higher capacity and improved coulombic efficiency compared to the neat WS₂ and neat SiOC materials in these cells.

Innovative functional polymerization of pyrrole-N-propionic acid onto WS2 nanotubes using cerium-doped maghemite nanoparticles for photothermal therapy

Tungsten disulfide nanotubes (WS₂-NTs) were found to be very active for photothermal therapy. However, their lack of stability in aqueous solutions inhibits their use in many applications, especially in biomedicine. Few attempts were made to chemically functionalize the surface of the NTs to improve their dispersability. Here, we present a new polymerization method using cerium-doped maghemite nanoparticles (CM-NPs) as magnetic nanosized linkers between the WS₂-NT surface and pyrrole-N-propionic acid monomers, which allow in situ polymerization onto the composite surface. This unique composite is magnetic, and contains two active entities for photothermal therapy—WS₂ and the polypyrrole. The photothermal activity of the composite was tested at a wavelength of 808 nm, and significant thermal activity was observed. Moreover, the polycarboxylated polymeric coating of the NTs enables effective linkage of additional molecules or drugs via covalent bonding. In addition, a new method was established for large-scale synthesis of CM-NPs and WS₂-NT-CM composites.

Nanoporous Functionalized WS2/MWCNTs Nanocomposite for Trimethylamine Detection Based on Quartz Crystal Microbalance Gas Sensor

We have developed a tungsten disulfide (WS₂)/multiwall carbon nanotubes (MWCNTs) nanocomposite based QCM gas sensor for (trimethylamine) TMA gas sensing of low concentrations. WS₂/MWCNTs nanocomposite was synthesized via the hydrothermal method and was characterized for surface morphology, nanostructure, thermal stability, and elementary composition. The TMA-sensing properties of WS₂/MWCNTs nanocomposite based QCM sensor were investigated. The composite based QCM sensor showed faster response time, strong response amplitude, good gas capacity, and good selectivity and stability compared with as prepared WS₂ and MWCNTs-1 based QCM sensor. The response time of WS₂/MWCNTs based QCM sensor was 294.1 and 142.9 s shorter than WS₂ and MWCNTs-1 for 500 ppb TMA gas. And the response of the WS₂/MWCNTs based QCM sensor was almost stable over 40 days, and the limit of detection (LOD) was 76 ppb calculated by the ICH method. This was ascribed to the fact that MWCNTs provided a skeleton for the growth of WS₂ nanosheets and avoided agglomeration. The special structure could not only improve the structure ability but also expose more active adsorption sites. In order to further investigate the adsorption mechanism of the TMA molecule on (pure/functionalized) WS₂ materials, density functional theory (DFT) calculations based on first-principle were conducted in the Vienna Ab-initio Simulation Package under ideal conditions.

Transition metal dichalcogenide (TMDs) electrodes for supercapacitors: a comprehensive review

As globally, the main focus of the researchers is to develop novel electrode materials that exhibit high energy and power density for efficient performance energy storage devices. This review covers the up-to-date progress achieved in transition metal dichalcogenides (TMDs) (e.g. MoS₂, WS₂, MoSe_2,and WSe₂) as electrode material for supercapacitors (SCs). The TMDs have remarkable properties like large surface area, high electrical conductivity with variable oxidation states. These properties enable the TMDs as the most promising candidates to store electrical energy via hybrid charge storage mechanisms. Consequently, this review article provides a detailed study of TMDs structure, properties, and evolution. The characteristics technique and electrochemical performances of all the efficient TMDs are highlighted meticulously. In brief, the present review article shines a light on the structural and electrochemical properties of TMD electrodes. Furthermore, the latest fabricated TMDs based symmetric/asymmetric SCs have also been reported.

Optimal strategy based on radiation chemistry for facile and direct synthesis of poly(3-thiophene acetic acid) polymers in water and dichloromethane

γ-Induced polymerization was used as a novel method to easily synthesize nanostructured PTAA polymers in water and dichloromethane.